Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multiple beam”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

A review of performance characteristics of satellite antennas and some observations on future directions in satellite antenna design

A general review of the state-of-the-art and new directions in research and development of spacecraft antennas is presented. Three general classes of antennas are discussed: phased arrays, lenses (dielectric and waveguide), and reflector antennas. Presently, the antenna with most applications is the reflector with considerable research being performed to improve its scan and multiple beam characteristics. Future applications for spacecraft antennas and research goals to meet these projected needs also are discussed.

Mittra, R.↗
NASA NTRS1978

Definition study of the Shuttle Imaging Radar-A /SIR-A/ antenna on the second Space Shuttle mission /OFT-2/

The study resulted in the definition of an antenna configuration fixed-mounted high in the payload bay on the hybrid OFT-2 pallet which is compatible with Orbiter interface requirements. Tests showed that the combination of the selected panels and the designed corporate feed will meet the SIR-A performance requirement of 33 dB gain. The effects of Orbiter structure proximity on performance were determined by scale model tests to be negligible. The potential for improved performance during subsequent reflights includes a multiple-beam capability and dual polarization.

Nitschke, H. A.↗
NASA NTRS1978

A system concept for wide swath constant incident angle coverage

The multiple beam SAR system concept is developed and shown to readily overcome the radar ambiguity constraints associated with orbital systems, thus permitting imagery over swaths much wider than 100 km. The antenna technique permits imagery at nearly constant incidence angles. When frequency scanning is used, the center angle may be programmed. The redundant use of the antenna aperture during reception results in lower transmitted power and in shorter antenna lengths in comparison with conventional designs.

Claassen, J. P.↗
NASA NTRS1979

Future large broadband switched satellite communications networks

Critical technical, market, and policy issues relevant to future large broadband switched satellite networks are summarized. Our market projections for the period 1980 to 2000 are compared. Clusters of switched satellites, in lieu of large platforms, etc., are shown to have significant advantages. Analysis of an optimum terrestrial network architecture suggests the proper densities of ground stations and that link reliabilities 99.99% may entail less than a 10% cost premium for diversity protection at 20/30 GHz. These analyses suggest that system costs increase as the 0.6 power of traffic. Cost estimates for nominal 20/30 GHz satellite and ground facilities suggest optimum system configurations might employ satellites with 285 beams, multiple TDMA bands each carrying 256 Mbps, and 16 ft ground station antennas. A nominal development program is outlined.

Staelin, D. H.↗
NASA NTRS1980

An advanced domestic satellite communications system

An updated traffic projection for U.S. domestic satellite communications service covering a period of 15 years; mid-1980 to mid-1995 was prepared. This model takes into account expected technology advances and reductions in transmission costs, legislative and regulatory changes permitting increased competition, and rising energy costs which will encourage more extensive substitution of telecommunications for travel. The historical development and current status of satellite systems are discussed as well as the characteristics of follow-on systems. Orbital arc utilization, spacecraft configuration for single shuttle launch, Earth station configuration, and system costs are examined. Areas which require technology development include multiple beam frequency reuse antennas, on-board switching, intersatellite links, and ka-band operation. Packing and deployment schemes for enclosing the satellite within the shuttle orbiter bay must also be devised.

Source record↗
NASA NTRS1981

Hoop/column antenna technology development summary

The Langley Research program for development of hoop/column antenna technology was redirected and includes the fabrication and test of models such as the 4 gore segment of a 50 meter antenna and the 15 meter diameter fully deployable antenna. Significant results were obtained in the point design that includes a quad aperture reflector system for multiple beam applications.

Campbell, T. G.↗
NASA NTRS1980

The 30/20 Gigahertz transponder study

Design features and performance parameters are described for three types of wideband multiple channel satellite transponders for use in a 30/20 GHz communications satellite, which provides high data rate trunking service to ten ground station terminals. The three types of transponder are frequency division multiplex (FDM), time division multiplex (TDM), and a hybrid transponder using a combination of FDM and TDM techniques. The wideband multiple beam trunking concept, the traffic distribution between the trunking terminals, and system design constraints are discussed. The receiver front end design, the frequency conversion scheme, and the local oscillator design are described including the thermal interface between the transponders and the satellite. The three designs are compared with regard to performance, weight, power, cost and initial technology. Simplified block diagrams of the baseline transponder designs are included.

Source record↗
NASA NTRS1983

Optical Temperature Sensor Has Digital Output

New instrument measures temperature reliabily and accurately. Device uses Fabry-Perot multiple-beam sensor. Both temperature sensor and optical lines are free of all electrical and electromagnetic effects and interference. Variation in spacer is made sensitive to other physical quantities, such as pressure. Sensing element itself is quite small, enhancing use in confined areas.

James, K.↗
NASA NTRS1982

Radio frequency verification tasks related to a multiple aperture reflector system

The establishment of analytical methods for predicting the electromagnetic performance of multiple offset fed apertures for multiple beam large space antenna systems is highlighted. The development of experimental modeling techniques for verifying the analytical methods used in predicting the effects of surface roughness (pillows), scattering, and aperture coupling on RF performance is discussed.

Campbell, T. G.↗
NASA NTRS1981

Development of a synthetic aperture radar design approach for wide-swath implementation

The first phase of a study program to develop an advanced synthetic aperture radar design concept is presented. Attributes of particular importance for the system design include wide swath coverage, reduced power requirements, and versatility in the selection of frequency, polarization and incident angle. The multiple beam configuration provides imaging at a nearly constant angle of incidence and offers the potential of realizing a wide range of the attributes desired for an orbital imaging radar for Earth resources applications.

Jean, B. R.↗
NASA NTRS1982

LSST (Hoop/Column) Maypole Antenna Development Program, phase 1, part 1

The first of a two-phase program was performed to develop the technology necessary to evaluate, design, manufacture, package, transport and deploy the hoop/column deployable antenna reflector by means of a ground based program. The hoop/column concept consists of a cable stiffened large diameter hoop and central column structure that supports and contours a radio frequency reflective mesh surface. Mission scenarios for communications, radiometer and radio astronomy, were studied. The data to establish technology drivers that resulted in a specification of a point design was provided. The point design is a multiple beam quadaperture offset antenna system wich provides four separate offset areas of illumination on a 100 meter diameter symmetrical parent reflector. The periphery of the reflector is a hoop having 48 segments that articulate into a small stowed volume around a center extendable column. The hoop and column are structurally connected by graphite and quartz cables. The prominence of cables in the design resulted in the development of advanced cable technology. Design verification models were built of the hoop, column, and surface stowage subassemblies. Model designs were generated for a half scale sector of the surface and a 1/6 scale of the complete deployable reflector.

Sullivan, M. R.↗
NASA NTRS1982

Land Mobile Satellite Service (LMSS): A conceptual system design and identification of the critical technologies. Part 1: Executive summary

A system design for a satellite aided land mobile service is described. The advanced system is based on a geostationary satellite which employs a large UHF reflector to communicate with small user antennas on mobile vehicles. It is shown that the system through multiple beam antennas and frequency reuse provides for radiotelephone and dispatch channels. It is concluded that the system is technologically feasible to provide service to rural and remote regions.

Naderi, F.↗
NASA NTRS1982

Land Mobile Satellite Service (LMSS): A conceptual system design and identification of the critical technologies: Part 2: Technical report

A conceptual system design for a satellite-aided land mobile service is described. A geostationary satellite which employs a large (55-m) UHF reflector to communicate with small inexpensive user antennas on mobile vehicles is discussed. It is shown that such a satellite system through multiple beam antennas and frequency reuse can provide thousands of radiotelephone and dispatch channels serving hundreds of thousands of users throughout the U.S.

Naderi, F.↗
NASA NTRS1982

Introduction

The concept of land mobile service is reviewed. The conventional terrestrial mobile radio systems, including dispatch and radiotelephone are described. The more advanced cellular system is described, and the way it mitigate the many problems currently plaguing the conventional terrestrial mobile service are discussed. The concept of the Land Mobile Satellite Service is introduced. How a satellite system can augment the terrestrial system for a truly ubiquitous coverage is shown. The operation of a multiple beam satellite system is explained in terms of its similarities with the terrestrial cellular systems. The potential frequency spectrum availability for the LMSS in the United States is included.

Source record↗
NASA NTRS1982

Concept for advanced satellite communications and required technologies

The advanced communications technology satellite (ACTS) program of NASA is aimed at the development of high risk technologies that will enable exploiting higher frequency bands and techniques for improving frequency reuse. The technologies under development include multiple beam spacecraft antennas, on-board switching and processing, RF devices and components and advanced Earth stations. The program focus is on the Ka-band (30/20 GHz) as the implementing frequency since it has five times the bandwidth of either the C- or Ku-bands. However, the technology being developed is applicable to other frequency bands as well and will support a wide range of future communications systems required by NASA, other Government agencies and the commercial sector. An overview is presented of an operational 30/20 GHz satellite system that may evolve. How the system addresses service requirements is discussed, and the technology required and being developed is considered.

Ramler, J. R.↗
NASA NTRS1982

Next generation communications satellites: multiple access and network studies

Efficient resource allocation and network design for satellite systems serving heterogeneous user populations with large numbers of small direct-to-user Earth stations are discussed. Focus is on TDMA systems involving a high degree of frequency reuse by means of satellite-switched multiple beams (SSMB) with varying degrees of onboard processing. Algorithms for the efficient utilization of the satellite resources were developed. The effect of skewed traffic, overlapping beams and batched arrivals in packet-switched SSMB systems, integration of stream and bursty traffic, and optimal circuit scheduling in SSMB systems: performance bounds and computational complexity are discussed.

Meadows, H. E.↗
NASA NTRS1983

Pushbroom radiometry and its potential using large space antennas

Electromagnetic radiation is emitted by matter which was heated to a temperature above absolute zero. The amount of blackbody radiation in the microwave frequency region of interest (10 to the 8th power f 10 to the 10th power Hz) emitted by matter can be determined from the Rayleigh-Jeans approximation to Planck's Radiation Law. The amount of electromagnetic radiation from matter which is not a blackbody is a function of the emissivity of the material. The emissivity is a factor less than unity and is a function of several parameters including chemical composition, temperature, frequency, surface characteristics, and viewing angle. A radiometer is an instrument which detects and provides a measure of the electromagnetic radiation being emitted by a material or surface area within the radiometer's antenna beamwidth. Microwave radiometers provide the capability for remote measurements from Earth orbits of geophysical parameters. These measurements will require the use of a microwave imaging radiometer using a large aperture deployable antenna with multiple beams in a pushbroom mode to achieve high spatial resolution and large swath width.

Harrington, R. F.↗