Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “modulation transfer function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

MTF Analysis of LANDSAT-4 Thematic Mapper

The spatial radiance distribution of a ground target must be known to a resolution at least four to five times greater than that of the system under test when measuring a satellite sensor's modulation transfer function. Calibration of the target requires either the use of man-made special purpose targets with known properties, e.g., a small reflective mirror or a dark-light linear pattern such as line or edge, or use of relatively high resolution underflight imagery to calibrate an arbitrary ground scene. Both approaches are to be used, in addition a technique that utilizes an analytical model of the scene spatial frequency power spectrum is being investigated as an alternative to calibration of the scene.

Schowengerdt, R.↗
NASA NTRS1985

Preliminary Evaluation of Thematic Mapper Image Data Quality

Improvements in the ability to monitor renewable resources/vegegation due to improvements in the spatial, spectral and radiometric resolution of TM data were evaluated. Results presented from the first 4 months of analysis presented include: (1) geometric performance; (2) band-to-band registration; (3) modulation transfer function; and (4) crop separabililty performance. Crop separability in Webster County, Iowa and in Mississippi County, Arkansas as determined by cluster and principal components analyses is assessed.

Macdonald, R. B.↗
NASA NTRS1984

An investigation of several aspects of LANDSAT-5 data quality

Band-to-band registration, geodetic registration, interdector noise, and the modulation transfer function (MTE) are discussed for the Palmer County; TX scene. Band combinations for several LANDSAT 4 and LANDSAT 5 scenes; the geodetic registration test for the Sacramento, CA area; periodic noise components in TM band 5; and grey level measurements by detector for Great Salt Lake (UT) dark water forescans and backscans are considered. Results of MTF analyses of the San Mateo Bridge and of TM high resolution and aerial Daedalus scanner imagery are consistent and appear to be repeatable. An oil-on-sand target was constructed on the White Sands Missile Range in New Mexico. The two-image analysis procedure used is summarized.

Wrigley, R. C.↗
NASA NTRS1984

Atmospheric effect on spatial resolution of surface imagery

The combined sensor-atmosphere characteristics, defined by the modulation transfer function, are calculated and used to evaluate the apparent resolution of remotely sensed imagery as determined by those characteristics. The atmospheric effect on the upward radiance is described, and the reduction of the apparent spatial resolution due to the atmospheric effect is discussed. The atmospheric effect on remote sensing is compared to the effect of the sensor's pixel size, and results are presented for the maximum resolution that can be achieved in the presence of atmospheric blurring effects.

Kaufman, Y. J.↗
NASA NTRS1985

The atmospheric effect on the separability of field classes measured from satellites

The atmospheric effect on the upward radiance emerging from the atmosphere above a nonuniform surface results in a reduction of the separability between the surface classes by broadening the radiance probability distribution of each class, while narrowing the total radiance range. The atmospheric modulation transfer function (MTF) is used in Fourier transform analyses to simulate the atmospheric effect on the imagery of a nonuniform surface and to demonstrate the atmospheric effect on separability of field classes.

Kaufman, Y. J.↗
NASA NTRS1985

Performance evaluation and geologic utility of LANDSAT-4 thematic mapper data

The overall objective of the project was to evaluate LANDSAT-4 Thematic Mapper (TM) data in the context of geologic applications. This involved a quantitative assessment of the data quality including the spatial and spectral characteristics realized by the instrument. Three test sites were selected for the study: (1) Silver Bell, Arizona; (2) Death Valley, California; and (3) Wind River/Bighorn Basin area, Wyoming. Conclusions include: (1) Artificial and natural targets can be used to atmospherically calibrate TM data and investigate scanner radiometry, atmospheric parameters, and construction of atmospheric Modulation Transfer Functions (MTF's), (2) No significant radiometric degradation occurs in TM data as a result of SCROUNGE processing; however, the data exhibit narrow digital number (DN) distributiosn suggesting that the configuration of the instrument is not optimal for each science applications, (30 Increased spatial resolution, 1:24,000 enlargement capability, and good geometric fidelity of TM data allow accurate photogeologic/geomorphic mapping, including relative age dating of alluvial fans, measurement of structural and bedding attitudes, and construction of such things as structural cross sections and stratigraphic columns. (4) TM bands 5 and 7 are particularly useful for geologic applications because they span a region of the spectrum not previously sampled by multispectral scanner data and are important for characterizing clay and carbonate materials.

Paylor, E. D.↗
NASA NTRS1985

Measurement of Thematic Mapper data quality

Thematic Mapper data from Landsat-4 and Landsat-5 were examined for band-to-band registration, absolute geodetic registration, periodic noise and spatial resolution. Between focal planes, appreciable misregistrations existed in early data products but were corrected in later data products. The analysis of absolute geodetic registration used only system-corrected data because ground control point-corrected data were unavailable. Geodetic registration errors averaged only 9.7 pixels, less than expected for system-corrected data. Periodic noise at four spatial frequencies was observed in Landsat-5 Thematic Mapper data by using Fourier analysis on small areas over water. Magnitudes of periodic noise components were consistent within a scene. The modulation transfer function was determined for two Landsat-4 scenes. The effective instantaneous field of view was 40.8 meters in one case, and 48.6 meters in the other.

Wrigley, R. C.↗
NASA NTRS1986

Loss of fine-scale surface texture in Viking Orbiter images and implications for the inferred distribution of debris mantles

A numerical, self-consistent model is defined for filtering out the effects of haze which cause a loss of fine-scale features in Viking Orbiter imagery of the Mars surface. Increased definition is necessary if the visual data is to serve for identifying terrain features which indicate the presence of volatiles such as ice. Crater images are used to calculate the change in atmospheric optical properties that accounts for alterations in the discriminability of crater features. Modulation transfer functions are developed for the image obscuration contributions of the atmosphere and the camera lens, thereby quantifying the smallest crater (6-7 pixels) that can be seen. The radiance of the viewed scene is modeled, and an atmospheric obscuration parameter is obtained as a function of the ratio of the atmospheric and surface obscuration contributions to the radiance at the detector. The contribution of the surface alone can then be identified. The model is applied in calculations of the total number of observed craters for comparisons with the expected number of craters, and to assess the potential for using the Viking cameras to characterize the geomorphic properties of various regions of the Mars surface.

Kahn, R.↗
NASA NTRS1985

Shortwave infrared 512 x 2 line sensor for earth resources applications

As part of the NASA remote-sensing Multispectral Linear Array Program, an edge-buttable 512 x 2 IRCCD line image sensor with 30-micron Pd2Si Schottky-barrier detectors is developed for operation with passive cooling at 120 K in the 1.1-2.5 micron short infrared band. On-chip CCD multiplexers provide one video output for each 512 detector band. The monolithic silicon line imager performance at a 4-ms optical integration time includes a signal-to-noise ratio of 241 for irradiance of 7.2 microwatts/sq cm at 1.65 microns wavelength, a 5000 dynamic range, a modulation transfer function, greater than 60 percent at the Nyquist frequency, and an 18-milliwatt imager chip total power dissipation. Blemish-free images with three percent nonuniformity under illumination and nonlinearity of 1.25 percent are obtained. A five SWIR imager hybrid focal plane was constructed, demonstrating the feasibility of arrays with only a two-detector loss at each joint.

Tower, J. R.↗
NASA NTRS1985

Operational MTF for Landsat Thematic Mapper

The Landsat Thematic Mapper (TM) represents significant improvements in spatial, spectral, and radiometric resolution over the older Multispectral Scanner System (MSS). For the last three years, NASA has conducted the Landsat Image Data Quality Analysis (LIDQA) program to quantify the performance of the TM on the Landsat-4 and 5 spacecraft. As part of this program, analysis of the TM imagery to extract the overall system modulation transfer function (MTF) has been performed. In this paper, the San Mateo Bridge in San Francisco is described as a target for calculation of the line spread function and MTF. The analysis of two TM scenes, one from 12/31/82 and one from 8/12/83, yielded effective-instantaneous-field-of-views (EIFOVs) of 40.8 meters and 48.6 meters, respectively. These values are compared with the 33.8 meter EIFOV predicted by component modelling of the TM sensor, and the differences discussed.

Schowengerdt, R.↗
NASA NTRS1985

Preliminary results of a quantitative comparison of the spectral signatures of Landsat Thematic Mapper (TM) and Modular Optoelectronic Multispectral Scanner (MOMS).

Operationally acquired Thematic Mapper and experimental MOMS-01 data are evaluated quantitatively concerning the systems spectral response and performance for geoscientific applications. Results show the two instruments to be similar in the spectral bands compared. Although the MOMS scanner has a smaller IFOV, it has a lower modulation transfer function performance for small, low contrast features as compared to Thematic Mapper. This deficiency does not only occur when MOMS was switched to the low gain mode. It is due to the CD arrays used (ITEK CCPD 1728).

Bodechtel, J.↗
NASA NTRS1987

Space station interior noise analysis program

Documentation is provided for a microcomputer program which was developed to evaluate the effect of the vibroacoustic environment on speech communication inside a space station. The program, entitled Space Station Interior Noise Analysis Program (SSINAP), combines a Statistical Energy Analysis (SEA) prediction of sound and vibration levels within the space station with a speech intelligibility model based on the Modulation Transfer Function and the Speech Transmission Index (MTF/STI). The SEA model provides an effective analysis tool for predicting the acoustic environment based on proposed space station design. The MTF/STI model provides a method for evaluating speech communication in the relatively reverberant and potentially noisy environments that are likely to occur in space stations. The combinations of these two models provides a powerful analysis tool for optimizing the acoustic design of space stations from the point of view of speech communications. The mathematical algorithms used in SSINAP are presented to implement the SEA and MTF/STI models. An appendix provides an explanation of the operation of the program along with details of the program structure and code.

Stusnick, E.↗
NASA NTRS1987

The physical basis for estimating wave energy spectra from SAR imagery

Ocean surface waves are imaged by synthetic aperture radar (SAR) through a combination of the effects of changes in the surface slope, surface roughness, and surface motion. Over a limited range of conditions, each of these effects can be described in terms of a linear modulation-transfer function. In such cases, the wave-height spectrum can be estimated in a straightforward manner from the SAR image-intensity spectrum. The range of conditions over which this assumption of linearity is valid is investigated using a numerical simulation model, and the implications of various departures from linearity are discussed.

Lyzenga, David R.↗
NASA NTRS1987

Performance characteristics of phased array and thinned aperture optical telescopes

While phased telescope arrays for general-purpose broadband imaging applications suffer severe sensitivity losses and field-of-view limitations, thinned-aperture telescopes consisting of a dilute, segmented primary mirror with a common secondary mirror are viable second-generation space telescope configurational possibilities yielding resolution and sensitivity an order of magnitude greater than those of the Hubble Space Telescope. Attention is given to thinned-aperture optical systems' image quality characterization problems; the 'practical resolution limit' image quality criterion proposed is defined as the reciprocal of the spatial frequency within which no zeros occur in the modulation transfer function.

Harvey, James E.↗
NASA NTRS1988

Measurements of high degree solar oscillation amplitudes

Measurements of high degree solar oscillation velocity amplitudes corrected for the effects of atmospheric seeing are presented. Observations of high degree oscillations, which have very small spatial features, suffer from the effects of atmospheric image blurring and image motion, thereby reducing the amplitudes of their spatial frequency components. In an attempt to correct the velocity amplitudes for these effects, the atmospheric modulation transfer function (MTF) was measured simultaneously by looking at the effects of seeing on the solar limb. The peak velocity power decreases by 2.6 and the energy per mode decreases by a factor 5 as l increases from 200 to 700. The results suggest that the modes are not in energy equipartition with convective turbulent eddies in the top of the convection zone.

Kaufman, James M.↗
NASA NTRS1991

X ray microscope assembly and alignment support and advanced x ray microscope design and analysis

Considerable efforts have been devoted recently to the design, analysis, fabrication, and testing of spherical Schwarzschild microscopes for soft x ray application in microscopy and projection lithography. The spherical Schwarzschild microscope consists of two concentric spherical mirrors configured such that the third order spherical aberration and coma are zero. Since multilayers are used on the mirror substrates for x ray applications, it is desirable to have only two reflecting surfaces in a microscope. In order to reduce microscope aberrations and increase the field of view, generalized mirror surface profiles have been considered in this investigation. Based on incoherent and sine wave modulation transfer function (MTF) calculations, the object plane resolution of a microscope has been analyzed as a function of the object height and numerical aperture (NA) of the primary for several spherical Schwarzschild, conic, and aspherical head reflecting two mirror microscope configurations.

Shealy, David L.↗
NASA NTRS1992

Microstructure characterization by angle-resolved scatter and comparison to measurements made by other techniques

The theory and measurement of angle-resolved scatter are described. Values of rms roughness that were obtained by using this technique to characterize four different materials are compared with values that were obtained by using a total integrated scatter measuring instrument, an optical profiler, and a mechanical profiler. The spatial frequency bandwidths and modulation transfer functions of the four instruments are different, and results are described in light of these differences.

Jacobson, R. D.↗
NASA NTRS1992

Flows around sunspots and pores

Observations are reported yielding high-resolution white-light data regarding the flow pattern of penumbral material and granules around sunspots and pores. The data are culled from optical observations near the limit of the telescope modulation transfer function, and correlation tracking is employed to track the motions of penumbral features and granules. Dark fibrils and bright grains in the sunspots' inner penumbra regions move toward the umbra, and the opposite occurs in the outer penumbra. Before pore formation and during the pores existence granular flows are found to converge on the features. The paper also details the evolution of an emerging flux region, and two types of photospheric dark alignments are described in the region of new flux emergence.

Wang, Haimin↗