Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “minimum loss”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

In situ fabrication and characterization of cobalt ferrite nanorods/graphene composites

Cobalt ferrite nanorods/graphene composites were prepared by a one-step hydrothermal process using NaHSO{sub 3} as the reducing agent and 1-propyl-3-hexadecylimidazolium bromide as the structure growth-directing template. The reduction of graphene oxide and the in situ formation of cobalt ferrite nanorods were accomplished in a one-step reaction. The structure and morphology of as-obtained composites were characterized by field emission scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, atomic force microscope, X-ray diffractometer, Fourier transform infrared spectra, X-ray photoelectron spectroscopy and Raman spectroscopy. Uniform rod-like cobalt ferrites with diameters of about 100 nm and length of about 800 nm were homogeneously distributed on the graphene sheets. The hybrid materials showed a saturation magnetization of 42.5 emu/g and coercivity of 495.1 Oe at room temperature. The electromagnetic parameters were measured using a vector network analyzer. A minimum reflection loss (RL) of − 25.8 dB was observed at 16.1 GHz for the cobalt ferrite nanorods/graphene composites with a thickness of 2 mm, and the effective absorption frequency (RL < − 10 dB) ranged from 13.5 to 18.0 GHz. The composites exhibited better absorbing properties than the cobalt ferrite nanorods and the mixture of cobalt ferrite nanorods and graphene. - Highlights: • Reduction of GO and formation of ferrites were accomplished in a one-step reaction. • Ionic liquid was used to control 1D growth of ferrite nanorods for the first time. • Cobalt ferrite nanorods/graphene composites showed dielectric and magnetic loss. • Cobalt ferrite nanorods/graphene composites exhibited better absorbing properties.

36 MATERIALS SCIENCE↗

Monodispersed boron carbonitride hollow spheres with high-performance microwave absorption property

Highlights: • Boron carbonitride hollow spheres were synthesized by a simple precursor. • A novel precursor was synthesized to prepare the hollow spheres. • The products exhibit excellent microwave absorption performance. - Abstract: A novel method, combining polymerization and pyrolysis of single precursor on graphite sheet, has been developed to synthesize monodispersed boron carbonitride hollow spheres in large-scale. The products have hollow architectures (2–3 μm in diameter) with nano-pores on the spherical walls and a composition of B{sub 0.23}N{sub 0.19}C{sub 0.58.} The products exhibit the minimum reflection loss of −42.5 dB at 12.6 GHz (the effective reflection values are obtained in a very wide range of 3.4–17.3 GHz) suggesting a new and high quality microwave absorbent.

36 MATERIALS SCIENCE↗

Special pure germanium-rich Ga-Ge-As-Se glasses for active mid-IR fiber optics

Highlights: • Special pure Ga{sub x}Ge{sub 25}As{sub 15}Se{sub 60-x} (x = 0; 1; 2; 3; 4; 5) glasses were prepared and investigated. • The glasses have high glass transition temperature (>320 °C) and low tendency to crystallization. • The microstructure, the transmission region and the linear refractive index of glasses were studied. • Dispersion optical parameters of glasses were calculated using the Wemple-DiDomenico model. • For the first time, a single-index Ga{sub 3}Ge{sub 25}As{sub 15}Se{sub 57} glass fiber was fabricated and investigated. - Abstract: Special pure Ga{sub x}Ge{sub 25}As{sub 15}Se{sub 60-x} (x = 0; 1; 2; 3; 4; 5) glasses were prepared using various methods for purification of the glass-forming melt. The glasses are characterized by high transparency in the spectral range 0.8–15 μm, low impurity content, high glass transition temperature (>320 °C), and low tendency to crystallization. The microstructure, the transmission range edges, the optical band-gap energy, and the linear refractive index of the glasses are studied. The refractive index of Ga{sub x}Ge{sub 25}As{sub 15}Se{sub 60-x} (x = 0÷5) glasses measured by ellipsometry increases with the substitution of selenium by gallium. It is for the first time that a single-index Ga{sub 3}Ge{sub 25}As{sub 15}Se{sub 57} glass fiber was fabricated, its minimum optical loss was about 0.6 dB/m at a wavelength of 6.7 μm. High-purity germanium-rich Ga-Ge-As-Se glasses were shown to be a promising material for active mid-IR fiber optics.

36 MATERIALS SCIENCE↗

Enhancement of microwave absorption bandwidth of polymer blend using ferromagnetic gadolinium silicide nanoparticles

Ferromagnetic gadolinium silicide (Gd 5 Si 4 ) nanoparticles significantly enhance the microwave absorption bandwidth of a polymer blend (PVB-PEDOT:PSS). These materials are essentially needed for various military and civilian applications such as X-band (8.2–12.4 GHz) and Ku-band (12.4–18 GHz) absorption. A single 1.2 mm thick layer of PVB-PEDOT:PSS-Gd 5 Si 4 (PPGS) nanocomposite film demonstrates the most promising bandwidth (8.2–18 GHz) with a minimum reflection loss of -14 dB. Mechanistically, dielectric loss ($\mathcal {tan}$δ e ≈2.4) and magnetic loss ($\mathcal {tan}$δ m ≈1.1) contributes more efficiently, and standard microwave simulation confirms the stored energy is predominant in PPGS nanocomposite which enhances the bandwidth.

36 MATERIALS SCIENCE↗

Integration of sensing and computing in an intelligent decision support system for homeland security defense

We propose an intelligent decision support system based on sensor and computer networks that incorporates various component techniques for sensor deployment, data routing, distributed computing, and information fusion. The integrated system is deployed in a distributed environment composed of both wireless sensor networks for data collection and wired computer networks for data processing in support of homeland security defense. We present the system framework and formulate the analytical problems and develop approximate or exact solutions for the subtasks: (i) sensor deployment strategy based on a two-dimensional genetic algorithm to achieve maximum coverage with cost constraints; (ii) data routing scheme to achieve maximum signal strength with minimum path loss, high energy efficiency, and effective fault tolerance; (iii) network mapping method to assign computing modules to network nodes for high-performance distributed data processing; and (iv) binary decision fusion rule that derive threshold bounds to improve system hit rate and false alarm rate. These component solutions are implemented and evaluated through either experiments or simulations in various application scenarios. The extensive results demonstrate that these component solutions imbue the integrated system with the desirable and useful quality of intelligence in decision making.

59 BASIC BIOLOGICAL SCIENCES↗

Dielectric and microwave attenuation properties of graphene nanoplatelet–epoxy composites

Graphene nanoplatelet (GNP)–epoxy composites were fabricated for the investigation of the dielectric permittivity and microwave absorption in a frequency range from 8 to 20 GHz. The intrinsically conductive GNP particles and polarized interfacial centers in the composites contribute to the microwave absorption. A minimum reflection loss of −14.5 dB at 18.9 GHz is observed for the GNP–epoxy composites with 15 wt. % GNP loading, which is mainly attributed to electric conductivity and the charge multipoles at the polarized interfaces in the GNP–epoxy composites.

36 MATERIALS SCIENCE↗

Low temperature dielectric and conductivity relaxation studies on magnetoelectric Pb(Fe{sub 2/3}W{sub 1/3})O{sub 3}

The single phase perovskite Pb(Fe{sub 2/3}W{sub 1/3})O{sub 3} [PFW] was synthesized by modified low – temperature (sintering at 850°C) solid-state reaction. Rietveld refinement ofroom temperature (RT) X-ray diffraction (XRD) and neutron diffraction (ND) patterns of the samples confirm the single phase formation with cubic structure (Pm-3m). Surface morphology of the compounds was studied by Scanning electron microscope (SEM) and average grain size was estimated to be ∼2 µm. The RT dielectric properties of PFW ceramic are studied as a function of frequency from 100 - 1MHz. The temperature dependent (120 – 293K) dielectric properties were studied at few selected frequencies. We found the frequency dependent dielectric constant shows increasing trend with increase in temperature from 120 – 293K, with minimum dielectric loss. The frequency dependence of dielectric loss shows a maximum in between 10 Hz and 1 kHz, confirms the extrinsic phenomena like interfacial polarization due to space charge accumulation at grain boundaries. Impedance spectroscopy is used to study the electrical behaviour of PFW in the frequency range from 100 to 1MHz and in the temperature range from 120 - 293 K. The frequency-dependent electrical data are analysed by impedance formalisms and shows the relaxation (conduction) mechanism in the sample. We suggest this low temperature sintered PFW is a suitable candidate for the multilayer ceramic capacitorsandrelated negative temperature coefficient of resistance type (NTCR) behavior like that of semiconductors.

36 MATERIALS SCIENCE↗

Analysis and Control of a Three-Port Converter with High-Frequency AC Link for Hybrid Unmanned/Autonomous Aerial Vehicles

In this study, a three-port resonant converter with a high-frequency isolation link for hybrid unmanned/autonomous aerial vehicle (UAV/AAV) applications is analyzed. The rectified engine-generator set output supplies the first input ports while the other is connected to a battery energy storage system. Input ports consist of half-bridge high-frequency inverters, whereas output port utilizes a semi-bridgeless active rectifier. This rectifier is formed by replacing rectifier low-side diodes with active switching devices. A phase-shift duty-cycle control is implemented for switching signals to regulate the power share and flow between ports. The proposed control system implemented achieves zero voltage switching (ZVS), reduces switching losses, and minimum current flow optimization ensures regulation in a wide range of output power. Compared to the existing bidirectional pulse width modulation (PWM) converters, the proposed system decreases the number of power conversion stages and provides centralized control without needing communications between the ports. The proposed control technique operating in closed-loop control achieves the power flow between ports under various load conditions. Finally, theoretical analysis demonstrates the proposed converter’s viability and laboratory experimental validations at 500 W full power.

33 ADVANCED PROPULSION SYSTEMS↗

Evaluation of Anomaly Detection for Wide-Area Protection Using Cyber Federation Testbed

Cyber physical security research for smart grid is currently one of the nation's top R&D priorities. The existing vulnerabilities in the legacy grid infrastructure make it particularly susceptible to countless cyber-attacks. There is a growing emphasis towards building interconnected, sophisticated federated testbeds to perform realistic experiments by allowing the integration of geographically-dispersed resources in the dynamic cyber-physical environment. In this paper, we present a cyber (network) based federation testbed to validate the performance of an anomaly detector in context of a Wide Area Protection (WAP) security. Specifically, we have utilized the resources available at the Iowa State University Power Cyber (ISU PCL) Laboratory to emulate the substation and local center networks; and the US Army Research Laboratory (ARL); to emulate the regional control center network. Initially, we describe a hardware-in-the loop based experimental setup for implementing data integrity attacks on an IEEE 39 bus system. We then perform network packet analysis focusing on latency and bandwidth as well as evaluate the performance of a decision tree based anomaly detector in measuring its ability to identify different attacks. Our experimental results reveal the computed wide area network latency; bandwidth requirement for minimum packet loss; and successful performance of the anomaly detector. Our studies also highlight the conceptual architecture necessary for developing the federated testbed, inspired by the NASPI network.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Radiation Stability of Spark‐Plasma‐Sintered Lead Vanadate Iodoapatite

Spark‐plasma‐sintered lead vanadate iodoapatite Pb 9.85 (VO 4 ) 6 I 1.7 , a promising nuclear waste form for the immobilization of I‐129, was irradiated with energetic ions, electrons, and gamma rays, to investigate its radiation stability. In situ TEM observation of the 1 MeV Kr 2+ irradiation shows that lead vanadate iodoapatite generally exhibits higher tolerance against ion irradiation‐induced amorphization than lead vanadate fluorapatite, and the spark plasma sintering can further enhance its radiation stability attributed to the enhanced crystallinity, reduced defect concentration, and denser microstructure. The critical amorphization dose and critical temperature for the SPS‐densified iodoapatite at 700°C are determined to be 0.25 dpa at room temperature and 230°C, respectively. No significant phase transformation or microstructural damage occurred under energetic electron and gamma irradiations. Raman spectra of gamma‐ray‐irradiated iodoapatite indicate improved V–O bond order at 500 kGy dose. Generally, the spark‐plasma‐sintered iodoapatite exhibits excellent radiation stability for nuclear waste form applications. The significantly enhanced radiation stability of the SPS‐densified iodoapatite suggests that SPS holds great promise for fabricating iodoapatite waste form with minimum iodine loss and optimized radiation tolerance for effective management of highly volatile I‐129.

Lu, Fengyuan↗

Conversion acoustic resonances in orthorhombic crystals

A classification of acoustic-beam reflection resonances in orthorhombic crystals under conditions where a proximity to conversion is implemented in the vicinity of total internal reflection is proposed. In this case, the energy from the incident pump beam falls almost entirely into a narrow intense reflected beam propagating at a small angle with respect to the surface. The crystal boundary is parallel to one of the elastic symmetry planes, and the excited beam propagates near one of axes 2 in this plane. Depending on the relations between the elastic moduli and the chosen propagation geometry, 18 types of resonances may occur, but no more than three in each crystal. The developed theory combines an approximate analytical description and accurate computer analysis. The relations between the elastic moduli providing minimum energy loss over the parasite reflected wave are determined. Some crystals with resonant excitation very close to conversion are revealed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Assessment of Amine-Based CO2BOLs for Direct Air Capture

Direct air capture (DAC) technologies extract CO 2 from the atmosphere for CO 2 storage, or utilization. Capturing CO 2 from the air is the most expensive application of carbon capture because CO 2 in the atmosphere is very dilute. There are limited number of CO 2 capture technologies for DAC application. This project aims at developing an energy efficient technology for DAC, leveraging two PNNL’s chemistries (solid and liquid CO 2 capture). Three CO 2 capture sorbents consisting of amine based CO 2 BOLs immobilized in mesoporous silica were designed, synthesized, and tested. These sorbents had ~ 19-23 wt.% amine loadings which is lower than typical amine-based silica sorbents. The surface area and pore volumes of these solid supported CO 2 BOLs are lower compared to those of the pristine silica support. The CO 2 capture performance of these materials was significantly lower than the typical silica supported amines due to low amine loading and higher molecular weight with low amine density. These results show that immobilize CO 2 BOLs in silica are not viable materials for removing CO 2 from ambient air. This project also designed, synthesized at tested liquid solvents for DAC application. Solvent properties that is vapor pressure, CO 2 uptake capacity, kinetics, and viscosity for three novel solvents were evaluated. The CO 2 uptake capacity for one of the most promising amine-based solvent BEPBEGDA was the highest at 13.2 wt% corresponding to 97 mol%. The vapor pressure of the BEPBEGDA solvents were very low at 80 °C compared to other solvents making them suitable for DAC application. The effect of humidity on the CO 2 capture performance of these solvents was evaluated which shows that presence of moisture doesn’t have a negative effect on the CO 2 uptake performance but makes it slightly better. The performances of these solvents were slightly below that of the 0.1M NaOH solution tested under similar conditions. Despite of the slightly lower CO 2 uptake, it is expected that these liquid solvents will have lower regeneration temperature and minimum evaporative losses due their low vapor pressure. Future work will focus on optimization of the liquid solvents for DAC application to improve both CO 2 capture efficiency and capacity without viscosity and vapor pressure increase. Testing of these solvents under DAC conditions using a gas liquid contactor that mimic industrial applications is needed. Solvent cost projection, techno-economic analysis and life cycle analysis are required to evaluate economic viability of this technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimal Model-Based Fault Estimation and Correction for Particle Accelerators and Industrial Plants Using Combined Support Vector Machines and First Principles Models

Timely estimation of deviations from optimal performance in complex systems and the ability to identify corrective measures in response to the estimated parameter deviations has been the subject of extensive research over the past four decades. The implications in terms of lost revenue from costly industrial processes, operation of large-scale public works projects and the volume of the published literature on this topic clearly indicates the significance of the problem. Applications range from manufacturing industries (integrated circuits, automotive, etc.), to large-scale chemical plants, pharmaceutical production, power distribution grids, and avionics. In this project we investigated a new framework for building parsimonious models that are suited for diagnosis and fault estimation of complex technical systems. We used Support Vector Machines (SVMs) to model potentially time-varying parameters of a First-Principles (FP) description of the process. The combined SVM & FP model was built (i.e. model parameters were trained) using constrained optimization techniques. We used the trained models to estimate faults affecting simulated beam lifetime. In the case where a large number of process inputs are required for model-based fault estimation, the proposed framework performs an optimal nonlinear principal component analysis of the large-scale input space, and creates a lower dimension feature space in which fault estimation results can be effectively presented to the operation personnel. To fulfill the main technical objectives of the Phase I research, our Phase I efforts have focused on: (1) SVM Training in a Combined Model Structure - We developed the software for the constrained training of the SVMs in a combined model structure, and successfully modeled the parameters of a first-principles model for beam lifetime with support vectors. (2) Higher-order Fidelity of the Combined Model - We used constrained training to ensure that the output of the SVM (i.e. the parameters of the beam lifetime model) are physically meaningful. (3) Numerical Efficiency of the Training - We investigated the numerical efficiency of the SVM training. More specifically, for the primal formulation of the training, we have developed a problem formulation that avoids the linear increase in the number of the constraints as a function of the number of data points. (4) Flexibility of Software Architecture - The software framework for the training of the support vector machines was designed to enable experimentation with different solvers. We experimented with two commonly used nonlinear solvers for our simulations. The primary application of interest for this project has been the sustained optimal operation of particle accelerators at the Stanford Linear Accelerator Center (SLAC). Particle storage rings are used for a variety of applications ranging from 'colliding beam' systems for high-energy physics research to highly collimated x-ray generators for synchrotron radiation science. Linear accelerators are also used for collider research such as International Linear Collider (ILC), as well as for free electron lasers, such as the Linear Coherent Light Source (LCLS) at SLAC. One common theme in the operation of storage rings and linear accelerators is the need to precisely control the particle beams over long periods of time with minimum beam loss and stable, yet challenging, beam parameters. We strongly believe that beyond applications in particle accelerators, the high fidelity and cost benefits of a combined model-based fault estimation/correction system will attract customers from a wide variety of commercial and scientific industries. Even though the acquisition of Pavilion Technologies, Inc. by Rockwell Automation Inc. in 2007 has altered the small business status of the Pavilion and it no longer qualifies for a Phase II funding, our findings in the course of the Phase I research have convinced us that further research will render a workable model-based fault estimation and correction for particle accelerators and industrial plants feasible.

43 PARTICLE ACCELERATORS↗

Rotary antenna attenuator

Radio frequency attenuator, having negligible insertion loss at minimum attenuation, can be used for making precise antenna gain measurements. It is small in size compared to a rotary-vane attenuator.

Dickinson, R. M.↗

Optical frequency waveguide and ion transmission system

Electromagnetically generated, high-dielectric tube forms a waveguide which retains the electromagnetic energy within the beam, the trapped beam establishes an optical frequency waveguide appropriate for its own conduction with minimum diffraction loss.

Chiao, R. Y.↗

Program on ground test of modified quiet, clean, JT3D and JT8D turbofan engines in their respective nacelles

A program to reduce the community noise levels of commercial jet aircraft is summarized. The program objective is the development of three acoustically treated nacelle configurations for the 707, 727, and 737 series aircraft to provide maximum noise reduction with minimum performance loss, modification requirements, and economic impact. The preliminary design, model testing, data analyses, and economic studies of proposed nacelle configurations are discussed.

Source record↗