Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microporous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Supported Lanthanum Borohydride Catalyzes CH Borylation Inside Zeolite Micropores

Abstract The zeolite‐supported lanthanide La(BH 4 ) x ‐HY 30 catalyzes C−H borylation of benzene with pinacolborane (HBpin), providing a complementary approach to precious, late transition metal‐catalyzed borylations. The reactive catalytic species are generated from La grafted at the Brønsted acid sites (BAS) in micropores of the zeolite, whereas silanoate‐ and aluminoate‐grafted sites are inactive under the reaction conditions. During typical catalytic borylations, conversion to phenyl pinacolborane (PhBpin) is zero‐order in HBpin concentration. A turnover number (TON) of 167 is accessed by capping external silanols, selectively grafting at BAS sites, and adding HBpin slowly to the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Diazo Linker Ligand Promotes Flexibility and Induced Fit Binding in a Microporous Copper Coordination Network

Abstract Flexible organic linkers represent an intuitive and effective strategy to design flexible metal–organic materials. We report herein a systematic study concerning the effect of varying the central bond of mixed pyridyl‐benzoate linkers, L, upon the flexibility of three isostructuralkddtopology microporous coordination networks (CNs) of formula ML 2 :X‐kdd‐1‐Cu,1= L = (E)‐4‐(pyridin‐4‐yldiazenyl)benzoate;X‐kdd‐2‐Cu,2= L = (E)‐4‐(2‐(pyridin‐4‐yl)vinyl)benzoate; the previously reportedX‐kdd‐3‐Cu,3= L = 4‐(pyridin‐4‐ylethynyl)benzoate. As revealed by single crystal x‐ray diffraction (SCXRD) and gas sorption studies,X‐kdd‐1‐Cu, exhibited gate‐opening during CO 2 and hydrocarbon (C2 and C8) sorption experiments whereas the other two CNs did not. Insight into these phase transformations was gained from in situ variable‐pressure and variable temperature powder X‐ray diffraction (PXRD), SCXRD, and modeling. Rotation of ligand1around the diazo bond, torsion angle changes between phenyl and carboxylate moieties, and deformation of the Cu‐based rod building blocks enabled activatedX‐kdd‐1‐Cuto form new phases with C8 isomers and CH 2 Cl 2 , CH 2 Cl 2 inducing contraction of the activated phase. Computational studies suggest that1enables flexibility thanks to its lower barrier of deformation versus2or3. This study teaches that diazo moieties could offer a general strategy to enhance the flexibility of CNs.

Chemistry↗

A Perylene‐Based Microporous Coordination Polymer Interacts Selectively with Electron‐Poor Aromatics

Abstract The design, synthesis, and properties of the new microporous coordination polymer UMCM‐310 are described. The unique electronic character of the perylene‐based linker enables selective interaction with electron‐poor aromatics leading to efficient separation of nitroaromatics. UMCM‐310 possesses high surface area and large pore size and thus permits the separation of large organic molecules based on adsorption rather than size exclusion.

Tran, Ly D.↗

Direct Structural Identification of Gas Induced Gate‐Opening Coupled with Commensurate Adsorption in a Microporous Metal–Organic Framework

Abstract Gate‐opening is a unique and interesting phenomenon commonly observed in flexible porous frameworks, where the pore characteristics and/or crystal structures change in response to external stimuli such as adding or removing guest molecules. For gate‐opening that is induced by gas adsorption, the pore‐opening pressure often varies for different adsorbate molecules and, thus, can be applied to selectively separate a gas mixture. The detailed understanding of this phenomenon is of fundamental importance to the design of industrially applicable gas‐selective sorbents, which remains under investigated due to the lack of direct structural evidence for such systems. We report a mechanistic study of gas‐induced gate‐opening process of a microporous metal–organic framework, [Mn(ina) 2 ] (ina=isonicotinate) associated with commensurate adsorption, by a combination of several analytical techniques including single crystal X‐ray diffraction, in situ powder X‐ray diffraction coupled with differential scanning calorimetry (XRD‐DSC), and gas adsorption–desorption methods. Our study reveals that the pronounced and reversible gate opening/closing phenomena observed in [Mn(ina) 2 ] are coupled with a structural transition that involves rotation of the organic linker molecules as a result of interaction of the framework with adsorbed gas molecules including carbon dioxide and propane. The onset pressure to open the gate correlates with the extent of such interaction.

Banerjee, Debasis↗

An Ultra-microporous Metal-Organic Framework with Exceptional Xe Capacity

Molecular confinement plays a significant effect on trapped gas and solvent molecules. A fundamental understanding of gas adsorption within the porous confinement provides information necessary to design a material with improved selectivity. In this regard, metal organic frameworks (MOFs) adsorbents are ideal candidate materials to study confinement effects for weakly interacting gas molecules such as noble gases. Among the noble gases, Xenon (Xe) has practical applications in the medical, automotive and aerospace industries. In this communication, we report an ultra-microporous nickel-isonicotinate MOF with exceptional Xe uptake and selectivity compared to all benchmark MOF and porous organic cage materials. The selectivity arises because of the near perfect fit of the atomic Xe inside the porous confinement. Notably, at low partial pressure, the Ni-MOF interacts very strongly with Xe compared to the closely related Krypton gas (Kr) and more polarizable CO2. Further 129Xe NMR suggests a broad isotropic chemical shift due to the reduced motion as a result of confinement.

Confinement effects, atomically precise materials,↗

Separation of Light Hydrocarbons through Selective Molecular Exclusion by a Microporous Metal–Organic Framework

Abstract [Zn 2 (sdc) 2 (bpe)] (compound 1 , sdc=4,4′‐stilbenedicarboxylate, bpe=1,2‐bis(4‐pyridyl)ethane)), a doubly interpenetrated, pillared‐layer microporous metal–organic framework has been solvothermally synthesized and structurally characterized by single‐crystal X‐ray diffraction. The structure features a common Zn 2 (COO) 4 paddle‐wheel building unit. Compound 1 undergoes structural change upon solvent removal. The activated phase (compound 2 ) displays permanent porosity, excellent thermal/moisture stability, and interesting hydrocarbon adsorption properties. Gas adsorption experiments show that compound 1 selectively adsorbs saturated/unsaturated C 2 hydrocarbons but excludes C 3 and C 4 hydrocarbons at room temperature. We have collected single‐component adsorption isotherms of six light hydrocarbons and calculated adsorption selectivities of various binary hydrocarbon mixtures by ideal adsorbed solution theory (IAST). The results show that compound 1 possesses remarkably high selectivity towards C 2 over C 3 /C 4 hydrocarbons and the separation is achieved by selective molecular exclusion.

Wang, Hao↗

Supercapacitive properties of micropore- and mesopore-rich activated carbon in ionic liquid electrolytes with various constituent ions

Ionic-liquid (IL) electrolytes, characterized by large potential windows, intrinsic ionic conductivity, low environmental hazard, and high safety, are used for micropore- and mesopore-rich activated-carbon (AC micro and AC meso ) supercapacitors. IL electrolytes consisting of various cations [1-ethyl-3-methylimidazolium (EMI + ), N-propyl-N-methylpyrrolidinium (PMP + ), and N-butyl-N-methylpyrrolidinium (BMP + )] and various anions [bis(trifluoromethylsulfonyl)imide (TFSI - ), BF 4 - , and bis(fluorosulfonyl)imide (FSI-)] are investigated. The electrolyte conductivity, viscosity, and ion transport properties at the AC micro and ACmeso electrodes are studied. In addition, the capacitance, rate capability, and cycling stability of the two types of AC electrodes are systematically examined and post-mortem material analyses are conducted. The effects of IL composition on the charge–discharge capacitances of the AC micro electrodes are more pronounced than those for the AC meso electrodes. The FSI-based IL electrolytes, for which electrochemical properties are cation dependent, are found to be promising. Incorporating EMI + with FSI - results in a low electrolyte viscosity and a fast ion transport, giving rise to optimized electrode capacitance and rate capability. Replacing EMI + with PMP + increases the cell voltage (to 3.5 V) and maximum energy density (to 42-Wh kg -1 ) of the AC micro cell at the cost of cycling stability.

36 MATERIALS SCIENCE↗

Properties of immobile hydrogen confined in microporous carbon

The mobility of H2 confined in microporous carbon was studied as a function of temperature and pressure using inelastic neutron scattering, and the translational and rotational motion of H2 molecules has been probed. At low loading, rotation of H2 molecules adsorbed in the smallest carbon pores (~6 ) is severely hindered, suggesting that the interaction between H2 and the host matrix is anisotropic. At higher loading, H2 molecules behave as nearly free rotor, implying lower anisotropic interactions with adsorption sites. At supercritical temperatures where bulk H2 is a gas, the inelastic spectrum of confined H2 provides evidence of a significant fraction of immobile, solid-like hydrogen. The onset temperature for molecular mobility depends strongly on the loaded amount. The fraction of immobile molecules increases with pressure and attains a plateau at high pressures. Surprisingly, immobile H2 is present even at temperatures as high as ~110 K. This research at ORNL s Spallation Neutron Source was sponsored by the Scientific User Facilities Division, Office of Basic Energy Sciences, U. S. Department of Energy. This research was supported in part by the ORNL Postdoctoral Research Associates Program, administered jointly by the ORNL and the Oak Ridge Institute for Science and Education. CIC and NCG acknowledge support from the Materials Science and Engineering Division, Office of Basic Energy Sciences, U.S. Department of Energy.

08 HYDROGEN↗

Modeling of diffusive mass transport in micropores in cement based materials

In order to predict long-term leaching behavior of cement constituents for safety assessments of radioactive waste disposal, we modeled diffusive mass transport in micropores in cement based materials. Based on available knowledge on the pore structure, we developed a transport porosity model that enables us to estimate effective porosity available for diffusion (transport porosity) in cement based materials. We microscopically examined the pore structure of hardened cement pastes to partially verify the model. Effective diffusivities of tritiated water in hardened cement pastes were also obtained experimentally, and were shown to be proportional to the estimated transport porosity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mechanically and thermally robust microporous copolymer separators for lithium ion batteries

Next generation, multifunctional separators can enhance energy storage, power, and safety performance of lithium ion batteries but must be simple to fabricate and incorporate with existing roll-to-roll manufacturing. Here, this study presents a strategy to facilely prepare these separators using UV-initiated polymerization-induced phase separation (PIPS), wherein microporous polymer separators are fabricated directly from constituent monomers and ethylene carbonate (EC) porogen. This enables a wide compositional design space as co-monomers with specific chemical functionality can be readily incorporated into the PIPS precursor mixture. Herein, 1,4-butanediol diacrylate (BDDA) was copolymerized with poly(ethylene glycol) diacrylate (PEGDA) to increase the acrylate conversion in the photopolymerization and improve mechanical properties. By tuning the ratio of PEGDA and EC, separators with high porosity (41.3%) and effective ionic conductivity (2.09 mS cm –1 ) were prepared. Inclusion of PEGDA was essential to increasing the elastic modulus to > 345 MPa, which is required for cell assembly by roll-to-roll manufacturing. All separators prepared were shown to enable reversible cycling of lithium metal/LiNi 0.5 Mn 0.3 Co 0.2 O 2 half-cells for 100 cycles. Unlike conventional polyolefin separators, which were shown to melt at 160 °C and shrink by up to 29.8% at elevated temperatures, the PIPS separators possess exceptional, safety-enhancing thermomechanical properties, undergoing no phase transitions or thermal shrinkage.

25 ENERGY STORAGE↗

Microporous Separators for Fe/V Redox Flow Batteries

The Fe/V redox flow battery has demonstrated promising performance that is advantageous over other redox flow battery systems. The less oxidative nature of the Fe(III) species enables use of hydrocarbon - based ion exchange membranes or separators. Daramic(reg. sign) microporous polyethylene separators were tested on Fe/V flow cells using the sulphuric/chloric mixed acid - supporting electrolytes. Among them, Daramic(reg. sign) C exhibited good flow cell cycling performance with satisfactory repeatability over a broad temperature range of 5 - 50 degrees C. Energy efficiency (EE) of C remains above 67% at current densities of 50 - 80 cm{sup -2} in the temperature range from room temperature to 50 degrees C. The capacity decay problem could be circumvented through hydraulic pressure balancing by applying different pump rates to the positive and negative electrolytes. Stable capacity and energy were obtained over 40 cycles at room temperature and 40 degrees C. These results manifest that the extremely low-cost separators ($10/cm2) are applicable in the Fe/V flow battery system at an acceptable sacrifice of energy efficiency. This stands for a remarkable breakthrough in significant reduction of the capital cost of the Fe/V flow battery system, and is promising to promote its market penetration in grid stabilization and renewable integration.

25 ENERGY STORAGE↗

Structure alterations in microporous (Mg,Fe){sub 2}Al{sub 4}Si{sub 5}O{sub 18} crystals induced by energetic heavy-ion irradiation

The microporous framework structure of (Mg{sub 1-x}Fe{sub x}){sub 2}Al{sub 4}Si{sub 5}O{sub 18} (=cordierite) has been subject to a comparative study on the effect of structural alterations originating from exposure to high-energy heavy ions. Oriented samples (with x=0.061, 0.122, and 0.170) were irradiated with swift {sup 124}Xe, {sup 197}Au and {sup 96}Ru ions with 11.1 MeV per nucleon energy and fluences of 1x10{sup 12} and 1x10{sup 13} ions/cm{sup 2}. Irradiated and non-irradiated samples were investigated by means of X-ray diffraction, Moessbauer spectroscopy and optical absorption spectroscopy. Structural investigations reveal an essentially unchanged Al,Si ordering, which appears to be unaffected by irradiation. The most remarkable macroscopic change is the ion-beam induced colouration, which could be assigned to electronic charge transfer transitions involving the Fe cations. Moessbauer spectra indicate an increased amount of {sup [4]}Fe{sup 3+} for the irradiated sample. The most noticeable structural alteration concerns irradiation-induced dehydration of extra-framework H{sub 2}O, which is accompanied by a reduction in the molar volume by {approx}0.2 vol%. - Graphical abstract: Cordierite single-crystal specimen showing the color change from pale blue (unirradiated) to a yellowish brown layer (irradiated) after exposure to relativistic {sup 124}Xe ions at a fluence of 1x10{sup 12} ions per cm{sup 2}.

36 MATERIALS SCIENCE↗

Syntheses, structures and properties of four 3D microporous lanthanide coordination polymers based on 3,5-pyrazoledicarboxylate and oxalate ligands

Four three-dimensional lanthanide coordination polymers with reversible structural interconversions, [Ln{sub 2}(Hpdc){sub 2}(C{sub 2}O{sub 4})(H{sub 2}O){sub 4}]{sub n}·2nH{sub 2}O [Ln=Sm (1), Eu (2), Tb (3) and Dy (4)], have been synthesized by hydrothermal reactions of lanthanide nitrates with 3,5-pyrazoledicarboxylic (H{sub 3}pdc) and oxalic acids. It is noteworthy that there is an in situ reaction in 1, in which H{sub 3}pdc was decomposed into (ox){sup 2−} with Cu(II)–Sm(III) synergistic effect under hydrothermal conditions. These compounds are isostructural and crystallized in the monoclinic P2{sub 1}/c space group. The Ln(III) ions are eight-coordinated with dodecahedron coordination geometry. These polyhedra are linked by oxalate groups to form 1D zigzag chain, which are further connected by 3,5-pyrazoledicarboxylate to extend similar 3D frameworks with channels along c-axis in 1–4. These coordination polymers display the characteristic emission bands of the Ln(III) ions in the solid state and possess good thermal stabilities. - Graphical abstract: Four 3D microporous lanthanide coordination polymers with reversible structural interconversion have been synthesized. They exhibit characteristic emission bands of the lanthanide ions and possess great thermal stability. - Highlights: • Four lanthanide coordination polymers have been hydrothermal synthesized. • There is an in situ reaction in 1 in which H{sub 3}pdc was decomposed into (ox){sup 2−} with the Cu(II)–Sm(III) synergistic effect under hydrothermal conditions. • TGA and XRD studies reveal that upon hydration–dehydration, compounds 1–4 undergo a reversible structural interconversion process through a cooling-heating cycle. • Compounds 1–4 exhibit characteristic lanthanide-centered luminescence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and crystal chemistry of microporous titanates K{sub x}(Ti,M){sub 8}O{sub 16} where M=Sc–Ni

Through salt-flux methods, single crystals of eight novel hollandite-type titanates have been grown with the stoichiometry K{sub x}(Ti{sub 8−y}M{sub y}){sub 8}O{sub 16} for x=y≈1.5 where M{sup 3+}=Sc, Ti, V, Cr, Mn, and Fe, and for x/2=y≈0.75 where M{sup 2+}=Co and Ni. Single crystal and powder X-ray diffraction reveals phase pure crystals with tetragonal space group I4/m. These titanates are microporous oxides with 1-dimensional channels where the non-framework cation, K, resides. In addition to diffraction, spectroscopic methods were used to characterize the chemical composition of both the bulk and surface. X-ray photoelectron spectroscopy affords the oxidation states of the substituted transition metals M on the surface and energy dispersive X-ray spectroscopy the metal ratios, including that of potassium, for an overall accurate description of the chemical composition of both the bulk and surface. Magnetization versus temperature measurements indicate that all phases are Curie paramagnets with effective magnetic moments consistent with the d-electron count given by combined X-ray diffraction and elemental analysis techniques. - Highlights: • Single crystal growth of K{sub x}(Ti,M){sub 8}O{sub 16} for M=Sc–Ni via molten salt flux. • Single crystal and powder X-ray diffraction utilized for structure of all compounds. • Oxidation states for all metals determined by X-ray photoelectron spectroscopy. • Cation stoichiometry confirmed by energy dispersive spectroscopy. • Effective moments from magnetization coincide with spectroscopy results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoluminescence characteristics of ZnO clusters confined in the micropores of zeolite L

Sub-nanometric ZnO clusters were prepared in the micropores of zeolite L by the incipient wetness impregnation method. The X-ray patterns (XRD), transmission electron microscope (TEM), N{sub 2} adsorption-desorption isotherms, UV-vis absorption spectra (UV-vis) and photoluminescence spectra (PL) were used to characterize the composite materials. The results indicate that a small amount of sub-nanometric ZnO clusters can be introduced into the channel of zeolite L, however, when the amount of ZnO loading exceeds 20 wt%, macrocrystalline ZnO appears on the external surface of zeolite L. Different from bulk ZnO materials, these sub-nanometric ZnO clusters exhibit their absorption onset below 255 nm and a blue luminescence band in the range of 404-422 nm. The temperature-dependent luminescence demonstrates that the amount of the ZnO loading significantly affects the exciton-phonon interaction between the ZnO clusters and the zeolite host. The ZnO clusters exhibit a picosecond scale emission lifetime at room temperature.

36 MATERIALS SCIENCE↗

High yield, large-scale synthesis of calcium-based microporous metal-organic framework and examination of the long-term stability for xenon adsorption applications

Here, scale-up synthesis of calcium-based microporous metal-organic framework (SBMOF-1) up to ~400 g in a batch with a yield of >90 % was achieved by a solvothermal reaction of sulfonyldibenzoic acid (SDB) with an excess of calcium chloride. Here, we observed that recrystallization of unreacted SDB at a solvothermal condition caused a moderate reaction yield (40–50 %) at the reference condition of $C_{CaCl_2}$/$C_{SDB}$=1 and $C_{SDB}$/$C_{SDB(ref)}$=1. Simply adding more reagents to the reactor did not increase the mass of product formed per unit volume due to a more pronounced loss of the yield at those conditions. By simultaneously changing the molar ratio of CaCl 2 to SDB, $C_{CaCl_2}$/$C_{SDB}$, and the molar concentration of the SDB reagent, $C_{SDB}$/$C_{SDB(ref)}$, we explored %yield of the reaction. Interestingly, a linear improvement in the yield was observed from 21% (at $C_{CaCl_2}$/$C_{SDB}$=0.5) up to 78% (at $C_{CaCl_2}$/$C_{SDB}$=6) at a fixed ratio of $C_{SDB}$/$C_{SDB(ref)}$=2 and the yield leveled off after further addition. Unlike those at $C_{CaCl_2}$/$C_{SDB}$=1, the yields at a high CaCl 2 excess continued to improve with increasing the $C_{SDB}$/$C_{SDB(ref)}$. When a large pressure vessel (2500 mL EtOH, $C_{CaCl_2}$/$C_{SDB}$=6, $C_{SDB}$/$C_{SDB(ref)}$=8) was used, about 415 g of SBMOF-1 with a yield of 92.3% was produced, indicating 16 × the space yield improvement. The ability to synthesize SBMOF-1 on a large scale allowed us to examine the long-term stability of SBMOF-1 for almost 200 days in the presence of varying levels of relative humidity.

36 MATERIALS SCIENCE↗

Enhancing the capacitive performance of microporous materials with protic ionic liquids

Classical density functional theory (cDFT) is used to investigate the electrosorption of protic ionic liquids in porous electrodes within the framework of a coarse-grained model. The purpose of this study is to clarify the capacitive behavior of protic ionic liquids in confined geometry. Previous studies have indicated that thermodynamic properties (e.g., capacitance, phase behavior and ionic conductivity) are influenced by the composition of the acid-base system and show asymmetry between acid dominant versus base dominant compositions. Here, we find that the electric double layer capacitance can be significantly improved by using protic ionic liquids compared to its aprotic counterpart through optimization of the mixture composition (i.e., the ratio of acid to base). We demonstrate the influence of pore size and applied voltage on the capacitance performance of protic ionic liquids and provide insight into microscopic understanding of ion and solvent distributions inside micropores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pillar[5]arene Based Conjugated Microporous Polymers for Propane/Methane Separation through Host–Guest Complexation

We present an efficient strategy for the preparation of conjugated microporous polymers incorporating pillar[5]arenes (P5-CMPs) with surface areas up to 400 m 2 g –1 via Pd-catalyzed Sonogashira–Hagihara cross-coupling reaction of triflate functionalized pillar[5]arene with 1,4-diethynylbenzene and 4,4'-diethynyl-1,1'-biphenyl linkers. In an effort to transfer intrinsic properties of pillar[5]arene, that is its ability to form strong host–guest complexes with linear hydrocarbons in solution, into the solid-state, we investigated the affinity of P5-CMPs toward propane gas. Unlike previously reported porous solids, which showed isosteric heats of adsorption ($Q$ st ) for propane in the range of 32.9–36.9 kJ mol–1 at zero coverage and increasing $Q$ st with rising loading due to intermolecular interactions between propane molecules, we observed very high $Q$ st values up to 53 kJ mol –1 at zero coverage, which gradually decreased to ~35 kJ mol –1 with increasing loadings. This observation indicates strong supramolecular host–guest complexation between propane and pillar[5]arene via multiple C–H/$π$ interactions, i.e., “macrocyclic effect” arising from the ideal size match of kinetic diameter of propane to the cavity of pillar[5]arene. This approach also allowed us to introduce thermodynamic selectivity for the separation of saturated hydrocarbons with low polarizability. High affinity of P5-CMPs for propane facilitated its efficient breakthrough separation from a simulated natural gas mixture (methane:propane, 9:1) at 298 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗