Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “metal-organic frameworks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Structural Templation of MOF-Derived Zirconia Nanoparticles

Templated synthesis is an important avenue for the development and synthesis of porous materials, as it provides a high level of control over the resulting structure. However, this control is difficult to achieve at the atomic level for poorly crystalline or noncrystalline materials, such as metal–organic framework (MOF)-derived carbons. We report the carbonization of three zirconium-based MOFs with different framework and inorganic building unit structures to form zirconia nanoparticles in a carbon matrix. Using a combination of X-ray diffraction, X-ray total scattering, and transmission electron microscopy, we found that the extended Zr-oxo chains of MIL-140C-bpy facilitate the formation of larger and more ordered zirconia nanoparticles. In contrast, the discrete Zr 6 -oxo clusters of UiO-67-bpy and Zr-ABTC result in smaller and differently structured nanoparticles.

metal-organic framework↗
DOE OSTI2024

Zirconium‐Based Metal–Organic Frameworks with Free Hydroxy Groups for Enhanced Perfluorooctanoic Acid Uptake in Water

Perfluorooctanoic acid (PFOA) is a highly recalcitrant organic pollutant, and its bioaccumulation severely endangers human health. While various methods are developed for PFOA removal, the targeted design of adsorbents with high efficiency and reusability remains largely unexplored. Here, in this work, the rational design and synthesis of two novel zirconium‐based metal‒organic frameworks (MOFs) bearing free ortho ‐hydroxy sites, namely noninterpenetrated PCN‐1001 and twofold interpenetrated PCN‐1002, are presented. Single crystal analysis of the pure ligand reveals that intramolecular hydrogen bonding plays a pivotal role in directing the formation of MOFs with free hydroxy groups. Furthermore, the transformation from PCN‐1001 to PCN‐1002 is realized. Compared to PCN‐1001, PCN‐1002 displays higher chemical stability due to interpenetration, thereby demonstrating an exceptional PFOA adsorption capacity of up to 632 mg g −1 (1.53 mmol g −1 ), which is comparable to the reported record values. Moreover, PCN‐1002 shows rapid kinetics, high selectivity, and long‐life cycles in PFOA removal tests. Solid‐state nuclear magnetic resonance results and density functional theory calculations reveal that multiple hydrogen bonds between the free ortho ‐hydroxy sites and PFOA, along with Lewis acid‐base interaction, work collaboratively to enhance PFOA adsorption.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Chemical Design of Spin Frustration to Realize Topological Spin Glasses

Patterning spins to generate collective behavior is at the core of condensed matter physics. Physicists develop techniques, including the fabrication of magnetic nanostructures and precision layering of materials specifically to engender frustrated lattices. As chemists, we can access such exotic materials through targeted chemical synthesis and create new lattice types by chemical design. Here, in this study, we introduce a new approach to induce magnetic frustration on a modified honeycomb lattice through a competition of alternating antiferromagnetic (AFM) and ferromagnetic (FM) nearest-neighbor interactions. By subtly modulating these two types of interactions through facile synthetic modifications, we created two systems: (1) a topological spin glass and (2) a frustrated spin-canted magnet with low-temperature exchange bias. To design this unconventional magnetic lattice, we used a metal–organic framework (MOF) platform, Ni 3 (pymca) 3 X 3 (NipymcaX where pymca = pyrimidine-2-carboxylato and X = Cl, Br). We isolated two MOFs, NipymcaCl and NipymcaBr, featuring canted Ni 2+ -based moments. Despite this similarity, differences in the single-ion anisotropies of the Ni 2+ spins result in distinct magnetic properties for each material. NipymcaCl is a topological spin glass, while NipymcaBr is a rare frustrated magnet with low-temperature exchange bias. Density functional theory calculations and Monte Carlo simulations on the NipymcaX lattice support the presence of magnetic frustration as a result of alternating AFM and FM interactions. Our calculations enabled us to determine the ground-state spin configuration and the distribution of spin–spin correlations relative to paradigmatic kagomé and triangular lattices. This modified honeycomb lattice is similar to the electronic Kekulé-O phase in graphene and provides a highly tunable platform to realize unconventional spin physics.

Exchange bias↗
DOE OSTI2024

Role of Solvent in the Oriented Growth of Conductive Ni‐CAT‐1 Metal‐Organic Framework at Solid–Liquid Interfaces

Abstract A controlled growth of two‐dimensional (2D) π‐conjugated metal‐organic frameworks (MOFs) on solid substrates can open exciting opportunities for the application of 2D MOFs as optoelectronic devices. Some factors like solvent composition and type of substrates are known to influence the properties of solution‐processed 2D MOF crystals; however, a mechanistic understanding of how interactions between solvent, substrate, and precursors affect heterogeneous nucleation has been limited. Here, it is reported that the structure of Ni‐catecholate (Ni‐CAT‐1) MOFs at a solid–liquid interface is controlled by solvent–substrate and solvent–MOF precursor interactions. Specifically, the structure of the MOF film can be controlled by varying the affinity of the solvent to the substrate. As a fraction of N , N ‐dimethylformamide (DMF) in a binary solvent mixture of water and DMF increases, the arrangement of Ni‐CAT‐1 crystals varies from vertically aligned nanorods to the graphite substrate to less ordered nanorods with the lower initial nucleation number density of Ni‐CAT‐1 crystals on the surface.

2D materials↗
DOE OSTI2025

Generative AI for design of nanoporous materials: review and future prospects

Generative artificial intelligence (AI) is emerging as a powerful tool for advancing the design of nanoporous materials such as metal–organic frameworks, covalent–organic frameworks, and zeolites. These materials have potential application in important areas such as carbon capture, catalysis, gas storage, chemical separation, and drug delivery due to their modular, tunable structures, and their performance in these areas depends on precise control over their structure, chemical functionalities, and properties. Herein, we provide a review of generative AI algorithms that are emerging as powerful tools for the design of nanoporous materials, namely generative adversarial networks, variational autoencoders, diffusion models, genetic algorithms, reinforcement learning, and large language models. Some models are particularly good at generating diverse and high-quality designs, while others excel at exploring large design spaces or optimizing materials with desired properties. Certain algorithms also allow for efficient transitions between different designs, and some offer versatility in generating materials based on textual input. We discuss the advantages, limitations, and applications of these algorithms in porous material design and emphasize the future potential of integrating AI with experimental workflows to accelerate the development and validation of AI-generated materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Post synthetic amine functionalization of MOF-808 for CO 2 sorption via ligand exchange and Michael addition

Post synthetic modification of metal organic frameworks presents a viable route for amine functionalization which can significantly enhance CO 2 sorption capacity. We present a facile means of amine incorporation using limited synthetic steps and low-cost reagents that results in a high density of primary alkyl amines distributed through a zirconium-based metal organic framework (MOF). Both the MOF synthesis and the post synthetic modification take place under aqueous conditions and result in strongly bound molecular amines available for sorbate interaction throughout the MOF pores. Furthermore, this amine incorporation protocol results in a significantly increased CO 2 capacity compared with the unmodified MOF-808. Specifically, CO 2 isotherms collected at 298 K for the unmodified MOF-808 show uptakes of 0.06, 0.2, and 1.2 mmol/g at 4, 15, and 100 kPa, respectively, which can be compared with 0.3, 0.7, and 2.5 mmol/g for the glycine grafted MOF-808 and 0.5, 0.9, and 2.3 mmol/g for ethylenediamine grafted MOF-808.

Amine sorbent↗
DOE OSTI2026

Isolated and H 2 -reduced Anderson clusters catalyse low-temperature hydrogenation of CO 2 to methanol

CO 2 hydrogenation, especially to methanol, is crucial to establishing sustainable closed-loop systems for carbon utilization. However, the difficulties of CO 2 activation at low temperatures and the ambiguity of structure–activity correlations are obstacles to reducing the energy consumption of the hydrogenation process. Here we report that molecularly defined Anderson PtMo 6 O 24 clusters, sited within a robust metal–organic framework, are catalytic for low-temperature CO 2 hydrogenation. The performance of the cluster showed no signs of decay in either its activity or methanol selectivity over 3,600 h at 180 °C. It also achieves a per-pass yield exceeding that of state-of-the-art heterogeneous catalysts under similar conditions. Combined in situ spectroscopy and density functional theory calculations demonstrated that CH 3 OH formation is dominated by the reverse water–gas shift and subsequent CO* hydrogenation pathway, while the HCOO* pathway may serve as a supplementary route. The well-defined cluster structure offers an ideal model for elucidating structure–activity correlations and opens exciting avenues for the rational design of high-activity, low-temperature catalysts for CO 2 hydrogenation.

heterogeneous catalysis↗
DOE OSTI2025

Machine learning-assisted design of metal–organic frameworks for hydrogen storage: A high-throughput screening and experimental approach

Various theoretical approaches, including big data and high-throughput screening techniques, have been explored in developing new materials due to their significant potential time-saving advantages. However, it remains a significant challenge to experimentally realize new materials that are predicted. In this study, we propose a novel materials design strategy that utilizes machine-learning (ML) techniques to predict new porous materials that show promise for hydrogen storage and are likely to be feasible to synthesize. By leveraging ML techniques and metal–organic framework (MOF) databases, we are able to predict the synthesizability of MOF structures. This is evidenced by the successful synthesis of a new vanadium-based MOF that exhibits excellent performance for cryogenic H 2 storage. Notably, the total gravimetric and volumetric H 2 uptakes are as high as 9.0 wt% and 50.0 g/L at 77 K and 150 bar. This ML-assisted materials design offers an efficient and promising approach for developing hydrogen storage materials.

08 HYDROGEN↗
DOE OSTI2025

Photochemical CO 2 Reduction by a Postsynthetically Modified Zr-MOF

Metal–organic frameworks are an excellent platform for photochemical CO 2 reduction into valuable chemicals. Herein, we report the synthesis and photocatalytic behavior of Ru@MOF-808, a Zr-based MOF, modified with a Ru-polypyridyl complex. The postsynthetic modification was achieved using solvent-assisted incorporation of bipyridine–carboxylate ligands onto the nodes of the MOF-808, followed by the coordination of Ru­(II)-terpyridine moiety. A thorough characterization including 1 H NMR, diffuse reflectance UV/vis, X-ray absorption spectroscopy and gas adsorption studies, combined with DFT calculations, provides strong support for efficient incorporation of the molecular Ru-complex at the loading of one Ru center per node. In the presence of a strong sacrificial reductant BIH, Ru@MOF-808 was found to catalyze the photochemical reduction of CO 2 into a mixture of CO and formate ion. When compared to the homogeneous model catalyst Ru­(tpy)­(bpy) 2+ , Ru@MOF-808 was found to exhibit higher formate yields. Additionally, to explain these formate enhancements, we propose a mechanism that involves CO 2 capture at the MOF nodes to form Zr-bicarbonate species, which further react in a hydride transfer reaction with photogenerated Ru–H donor, thereby outperforming molecular catalysts in HCOO – production. Overall, the results presented in this work indicate the potential of Zr-based MOFs in integrating CO 2 capture with its photochemical conversion to desired products.

CO2 reduction↗
DOE OSTI2024

Modification of ZIF‐8 Membranes for Gas Separation Using X‐ray Radiation

Here, we report an X-ray radiation-induced modification of the structure and gas permeation behavior of ZIF-8 membranes. With 300 min irradiation time, CO 2 permeance decreases by only 9 %, while N 2 and CH 4 permeances reduce by 75 and 65 %, respectively, leading to 3.7- and 2.6-fold enhancements in ideal selectivity for CO 2 /N 2 and CO 2 /CH 4 .

ZIF-8 membranes↗
DOE OSTI2024

Counterintuitive Trend of Intrusion Pressure with Temperature in the Hydrophobic Cu 2 (tebpz) MOF

Liquid porosimetry experiments reveal a peculiar trend of the intrusion pressure of water in hydrophobic Cu 2 (3,3',5,5'-tetraethyl-4,4'-bipyrazolate) MOF. At lower temperature (T) range, the intrusion pressure (P i ) increases with T. For higher T values, P i first reaches a maximum and then decreases. This is at odds with the Young–Laplace law, which for systems showing a continuous decrease of contact angle with T predicts a corresponding reduction of the intrusion pressure. Though the Young–Laplace law is not expected to provide quantitative predictions at the subnanoscale of Cu 2 (tebpz) pores, the physical intuition suggests that to a reduction of their hydrophobicity corresponds a reduction of the P i . Molecular dynamics simulations and sychrothron experiments allowed to clarify the mechanism of the peculiar trend of P i with T. At increasing temperatures the vapor density within the MOF’ pores grows significantly, bringing the corresponding partial pressure to ≈5 MPa. This pressure, which is consistent with the shift of P i observed in liquid porosimetry, represents a threshold to be overcame before intrusion takes place. Beyond some value of temperature, the phenomenon of reduction of hydrophobicity (and water surface tension) dominated over the opposite effect of increase of vapor pressure and P i inverts its trend with T.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synergic regulation of mechanically interlocked molecules via lanthanide-contraction-based metal modulation and constituent ratios

A set of mechanically interlocked molecules (MIMs) can be synthesized efficiently using a one-pot procedure by selecting different trivalent lanthanide metal cations (M 3+ , M = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, or Lu) and adjusting the proportion of the reaction components. In this system, a flexible tetracationic macrocycle, often referred to as the “Texas-sized molecular box”, interacts with terephthalate dianions and trivalent lanthanide metal cations to form various structures. The transition from metal-organic rotaxane frameworks (MORFs) to metal-containing rotaxane supramolecular organic frameworks (RSOFs) is largely dictated by the lanthanide contraction effect, which leads to a decrease in the coordination number of the lanthanide ions. In addition, the nature of the MIMs within the MORFs can be fine-tuned by varying the ratio of the cation to the other components, allowing for additional control over the interlocked system. Furthermore, these findings demonstrate that the choice of metal cation and adjustments in the building block ratios component represent promising strategies for controlling the structures of MIM-based frameworks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Charge Transfer and Recombination Pathways through Fullerene Guests in Porphyrin-Based MOFs

Porphyrin-based metal–organic frameworks (MOFs) offer a unique platform for building porous donor–acceptor networks that exhibit long-lived charge separation and transport upon incorporation of electron acceptor guest species. Here, in this work, porphyrin-based MOFs, PCN-222(H 2 ) and PCN-222(Zn), synthesized as nanoparticle suspensions, are successfully infiltrated with fullerene acceptor molecules, C 60 or PC 61 BM, in both polar and nonpolar solvent environments. The location and relative binding strength of these guest species are evaluated through a combination of N 2 physisorption measurements, photoluminescence quenching, and UV–vis absorption titration experiments. Semiempirical tight binding calculations are used to screen potential locations of the fullerene guest within the MOF pores, and hybrid density functional theory (DFT)-computed interaction energies confirm the energetically favorable positions. The fundamental photophysics of these donor–acceptor host–guest combinations are probed using ultrafast transient absorption spectroscopy. Sub-picosecond electron transfer involving initial exciplex population is observed, with slow charge recombination lifetimes on the order of τ ~1 ns for all systems in both dimethylformamide and 1,4-dioxane. Charge recombination occurs through population of fullerene and/or framework porphyrin triplet states depending on the porphyrin metalation status. The photophysics of the fullerene-loaded MOFs are discussed in the context of relevant porphyrin–fullerene donor–acceptor molecules to highlight the unique role of the framework environment in dictating photoinduced electron transfer and decay pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Exceptional Electrical Detection of Trace NO 2 via Mixed Metal MOF-on-MOF Film-Based Sensors

The tunability of metal–organic frameworks (MOFs) makes them exceptional materials for the development of highly selective, low-power sensors for toxic gas detection. Herein, we demonstrate enhanced detection of NO 2 gas by a MOF-based electrical impedance sensor made using a unique mixed metal MOF-on-MOF synthesis. For this work, a combined experimental and computational study was performed using the exemplar Ni x Mg 1–x -MOF-74 to understand the fundamental structure–property relationships behind metal mixing and MOF film synthesis methods on sensor performance. Density functional theory results indicated that the presence of Ni in Mg-MOF-74 increased framework stability and increased the electron density of states at lower energies near the HOMO, as well as enhanced the NO 2 –Mg adsorption interaction. Impedance data of the Ni x Mg 1–x -MOF-74 films with larger Ni contents showed greater impedance change after exposure to 1 ppm of NO 2 gas. Furthermore, when synthesized through either a drop-cast or direct solvothermal film growth approach, the monometallic Ni-based sensors had the best performance. However, the mixed metal Ni x Mg 1–x -MOF-74 sensors synthesized through a MOF-on-MOF approach resulted in the highest impedance change, outperforming all monometallic Ni-based sensors. In particular, the mixed metal Ni-on-Mg-MOF-74 film was the best-performing sensor with an impedance change of 309 upon trace NO 2 exposure. Change in impedance response after NO 2 exposure was improved by 52% compared to the best monometallic Ni-on-Ni-MOF-74 sensor. Structural analysis of the Ni-on-Mg film showed that the first Mg-MOF-74 layer acts as a structural template controlling the structural features of the final film after metal exchange with Ni. This led to improved film quality, evidenced by the greater crystallinity and larger MOF grain sizes, and resulted in enhanced sensor performance which was not achievable through other metal mixing methods. Altogether, this study identifies structure–property relationships and synthetic templating methods that inform MOF-based sensor design, allowing for improved detection of toxic compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Can the Rate of a Catalytic Turnover Be Altered by Ligands in the Absence of Direct Binding Interactions?

Second sphere coordination effects ubiquitous in enzymatic catalysis occur through direct interactions, either covalent or non-covalent, with reaction intermediates and transition states. Here, we present herein evidence of indirect second sphere coordination effects in which ligation of water/alkanols far removed from the primary coordination sphere of the active site nevertheless alter energetic landscapes within catalytic redox cycles in the absence of direct physicochemical interactions with surface species mediating catalytic turnovers. Density functional theory, in situ X-ray absorption and infrared spectroscopy, and a wide array of steady-state and transient CO oxidation rate data suggest that the presence of peripheral water renders oxidation half-cycles within two-electron redox cycles over μ m -oxo-bridged trimers in MIL-100(M) more kinetically demanding. Communication between ligated water and the active site appears to occur through the Fe-O-Fe backbone, as inferred from spin density variations on the central μ m -oxygen 'junction'. Evidence is provided for the generality of these second sphere effects in that they influence different types of redox half-cycles or metals, and can be amplified or attenuated through choice of coordinating ligand. Specifically in the case of MIL-100(M) materials, the Cr isostructure can be made to kinetically mimic the Fe variant by disproportionately hindering oxidation half-cycles relative to the reduction half-cycles. Kinetic and spectroscopic inferences presented here significantly expand both the conceptual definition of second sphere effects as well as the palette of synthetic levers available for tuning catalytic redox performance through chemical ligation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Ce-CuZn catalyst with abundant Cu/Zn-OV-Ce active sites for CO 2 hydrogenation to methanol

CO 2 hydrogenation to chemicals and fuels is a significant approach for achieving carbon neutrality. It is essential to rationally design the chemical structure and catalytic active sites towards the development of efficient catalysts. Here we show a Ce-CuZn catalyst with enriched Cu/Zn-OV-Ce active sites fabricated through the atomic-level substitution of Cu and Zn into Ce-MOF precursor. The Ce-CuZn catalyst exhibits a high methanol selectivity of 71.1% and a space-time yield of methanol up to 400.3 g·kg cat -1 ·h -1 with excellent stability for 170 h at 260°C, comparable to that of the state-of-the-art CuZnAl catalysts. Controlled experiments and DFT calculations confirm that the incorporation of Cu and Zn into CeO 2 with abundant oxygen vacancies can facilitate H 2 dissociation energetically and thus improve CO 2 hydrogenation over the Ce-CuZn catalyst via formate intermediates. This work offers an atomic-level design strategy for constructing efficient multi-metal catalysts for methanol synthesis through precise control of active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High-temperature carbon dioxide capture in a porous material with terminal zinc hydride sites

Carbon capture can mitigate point-source carbon dioxide (CO 2 ) emissions, but hurdles remain that impede the widespread adoption of amine-based technologies. Capturing CO 2 at temperatures closer to those of many industrial exhaust streams (>200°C) is of interest, although metal oxide absorbents that operate at these temperatures typically exhibit sluggish CO 2 absorption kinetics and instability to cycling. Here, in this study, we report a porous metal–organic framework featuring terminal zinc hydride sites that reversibly bind CO 2 at temperatures above 200°C—conditions that are unprecedented for intrinsically porous materials. Gas adsorption, structural, spectroscopic, and computational analyses elucidate the rapid, reversible nature of this transformation. Extended cycling and breakthrough analyses reveal that the material is capable of deep carbon capture at low CO 2 concentrations and high temperatures relevant to postcombustion capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Probing ligand conformation and net dimensionality in a series of tetraphenylethene-based metal–organic frameworks

Tetraphenylethene-based ligands with lowered symmetry are promising building blocks for the construction of novel luminescent metal–organic frameworks (MOFs). However, few examples have been reported, and predicting the ligand conformation and the dimensionality of the resulting MOF remains challenging. In order to uncover how synthetic conditions and accessible ligand conformations may affect the resulting MOF structure, four new MOF structures were synthesized under solvothermal conditions using the meta-coordinated tetraphenylethene-based ligand m-ETTC and paddlewheel SBUs composed of Co(II), Cu(II), and Zn(II). WSU-10 (WSU = Washington State University) is formed with either Zn or Cu comprising stacked psuedo-2D layers. The dimensionality of WSU-10 can be intentionally increased through the addition of pyrazine as a pillar ligand into the synthesis, forming the 3D structure WSU-11. The third structure, WSU-20, is formed by the combination of Zn or Co with m-ETTC and is intrinsically 3D without the use of a pillar ligand; interestingly, this is the result of a distortion in the paddlewheel SBU. Finally, Cu was also found to form a new structure (WSU-12), which displays an m-ETTC conformation unique from that found in the other isolated MOFs. Structural features are compared across the series and a mechanistic relationship between WSU-10 and -20 is proposed, providing insight into the factors that can encourage the generation of frameworks with increased dimensionality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗