Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mesoscale modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Dynamic and static initialization of a mesoscale model using VAS satellite data

Various combinations of temperature and moisture data from the VISSR Atmospheric Sounder (VAS), conventional radiosonde data, and National Meteorological Center (NMC) global analysis, were used in a successive-correction type of objective-analysis procedure to produce analyses for 1200 GMT. The NMC global analyses served as the first-guess field for all of the objective analysis procedures. The first-guess field was enhanced by radiosonde data alone, VAS data alone, both radiosonde and VAS data, or by neither data source. In addition, two objective analyses were used in a dynamic initialization: one included only radiosonde data and the other used both radiosonde and VAS data. The dependence of 12 hour forecast skill on data type and the methods by which the data were used in the analysis/initialization were then investigated. This was done by comparison of forecast and observed fields, of sea-level pressure, temperature, wind, moisture, and accumulated precipitation. The use of VAS data in the initial conditions had a slight positive impact upon forecast temperature and moisture but a negative impact upon forecast wind. This was true for both the static and dynamic initialization experiments. Precipitation forecasts from all of the model simulations were nearly the same.

Beauchamp, James G.↗
NASA NTRS1986

Forecasting sea breeze thunderstorms at the Kennedy Space Center using the Prognostic Three-Dimensional Mesoscale Model (P 3DM)

A Prognostic Three-Dimensional Model (P3DM) to produce 1- to 12-hr predictions of sea breeze convective (SBC) storms at KSC is described. The P3DM was developed to account for a scale of about 10 km, interactions between surface heat and moisture fluxes, boundary layer convergence, the movement of moisture into cloud formation zones, and alterations in the convective potential in the lower levels of the atmosphere during the diurnal cycle. Initialized with wind, temperature, specific humidity and local water temperature data, the model allows for the distortion of the boundary layer moisture and thermal fields by sea breeze conditions. The results of three simulations of events leading to the onset of SBC storms are presented to demonstrate the model's capabilities, and techniques which may enhance the accuracy of the predictions are discussed.

Lyons, Walter A.↗
NASA NTRS1987

Assimilation of scalar versus horizontal gradient information from the VAS into a mesoscale model

Comparisons are made between analyses and forecasts which incorporate VAS geopotential data as either scalar or horizontal gradient information for a case study on the AVE/VAS day of Mar. 6, 1982. On this day, incorporating the VAS information in analysis as a variational constraint on horizontal geopotential gradients significantly mitigated the effects of large data biases which made VAS assimilation by standard scalar methods very difficult. A subsequent forecast made from the gradient assimilation was superior to one made from the standard analysis and of comparable quality in geopotentials to a control forecast from synoptic data. Most impact was noted in the forecasts of vertical motion and precipitation in the gradient vs this control simulation.

Diak, George↗
NASA NTRS1999

Ocean Turbulence: Mesoscale Modeling in Isopycnal Coordinates the role of the Spectrum of Vertical Shear - Part 4

We study the tracer subgrid term in isopycnal coordinates, S(sub I). We employ two ingredients: the experimental data on vertical spectra of ocean turbulence measured by Gargett et al.(1981) and the stochastic approach recently developed by Dukowicz and Smith (1997). Our result confirms that S(sub I) is made of two parts: an advection and a diffusion term. However, the tracer bolus velocity u** consists of two terms u** = u(sub 1) + u(sub 2) while in the GM model there is only a term related to u(sub 1) which is shown to be: u(sub 1) = k(bar-q)(sup -1)(delta)(sub rho) where bar-q is the thickness weighted average potential vorticity, a result in agreement with the recent suggestions by Treguier et al. (1997), Lee et al. (1997) and Greatbatch (1998). The second component u(sub 2) IS new. We compute it in the geostrophic approximation using the Gargett et al. data (1981) on ocean vertical turbulence. We find that u(sub 2) much greater than u(sub 1) and that u(sub 2) is orthogonal to u(sub 1).

Canuto, V. M.↗
NASA NTRS2001

A study of heavy precipitation events in Taiwan during 10-13 August, 1994: mesoscale model simulations

Heavy rainfall occurred over the western side of Taiwan's complex terrain from August 10 to 13, 1994 after Typhoon Doug moved northward from the East China Sea into Taiwan and on towards the Yellow Sea. On August 10, most of the rainfall fell over sloped areas. The heaviest daily rainfall totals were in excess of 200 mm over southwestern as well as central Taiwan. However, not much rainfall occurred over northern Taiwan. The lack of rainfall over northern Taiwan also occurred on August 11, 12 and 13. The larger rainfall amounts shifted westward from the sloped areas on August 10 toward lower terrain on August 11. On August 12 and 13, most of the higher rainfall amounts were found over the coastal area in southwestern Taiwan. Notably, about 300 to 400 mm per day fell over the coastal area in southwest Taiwan on August 12 and 13. The distribution of rainfall amount was different on August 10 and 11 (termed as Case 1) compared to August 12 and 13 (termed as Case 2). The environmental situation and precipitation characteristics are analyzed using EC/TOGA data, ground-based radar data, surface rainfall patterns, surface wind data, and upper air soundings. Chen at al. (2001) also categorized the precipitation pattern into two types, propagating and quasi-stationary. For the propagating type of precipitation, rainrates increased or remained the same as systems went from the plains to mountainous regions. With the quasi-stationary type of precipitation, however, rainrates decreased as precipitation propagated across the plains and into the mountains. The focus of this study is to understand what causes the h1aher amounts of rainfall over Taiwan, and what factors influence where the higher amounts of rainfall will occur, over sloped areas or over coastal areas.

Tao, W.-K.↗
NASA NTRS2004

Assessing the Usefulness of AIRS Radiance Observations in a 4D-Var Assimilation Scheme Using the Penn State/NCAR Mesoscale Model Version 5 (MM5) and a Stand Alone Radiative Transfer Algorithm (SARTA)

Short-term precipitation forecast skill remains poor despite further advances in numerical modeling and data analysis. Utilizing indirect observations, such as the radiance observations obtained from the Atmospheric Infrared Sounder (AIRS), in a 4D-Var assimilation scheme may lead to a rapid improvement in the skill of 12-h QPF. In order to investigate the usefulness of AIRS observations, the adjoint code of a radiative transfer model (SARTA) is developed and linked to MM5 4D-Var system. A statistical comparison of the AIRS radiances with those calculated using the linked MMS-SARTA model is carried out to assess errors in the radiative transfer model, MM5 and AIRS data, and to develop a quality control scheme. Outliers and any bias that may exist in radiative transfer model, MM5 and AIRS data are identified. An adjoint sensitivity study, utilizing the SARTA adjoint model, is then done to identify the relative sensitivities of each spectral channel to such parameters as atmospheric temperature, pressure, and mixing ratio. Another sensitivity study is done using the MM5 alone to determine the sensitivity of the 12-h QPF to model parameters such as atmospheric temperature, pressure, and mixing ratio under various weather regimes (i.e. summertime convection, winter snowfall). Results from these two types of adjoint sensitivity studies are used to determine which AIRS channels contribute most to 12-h QPF under differing weather regimes. This information is useful when conducting 4D-Var experiments using a subset of the 2378 AIRS spectral channels. Finally, 4D-Var experiments are done to analyze the impact of the AIRS observations on the quality of the 12-h QPF results. This project falls under the data assimilation general session topic as specified by the conference organizers.

Carrier, M.↗
NASA NTRS2006

Hurricane Intensity Forecasts with a Global Mesoscale Model on the NASA Columbia Supercomputer

It is known that General Circulation Models (GCMs) have insufficient resolution to accurately simulate hurricane near-eye structure and intensity. The increasing capabilities of high-end computers (e.g., the NASA Columbia Supercomputer) have changed this. In 2004, the finite-volume General Circulation Model at a 1/4 degree resolution, doubling the resolution used by most of operational NWP center at that time, was implemented and run to obtain promising landfall predictions for major hurricanes (e.g., Charley, Frances, Ivan, and Jeanne). In 2005, we have successfully implemented the 1/8 degree version, and demonstrated its performance on intensity forecasts with hurricane Katrina (2005). It is found that the 1/8 degree model is capable of simulating the radius of maximum wind and near-eye wind structure, and thereby promising intensity forecasts. In this study, we will further evaluate the model s performance on intensity forecasts of hurricanes Ivan, Jeanne, Karl in 2004. Suggestions for further model development will be made in the end.

Shen, Bo-Wen↗
NASA NTRS2013

Range-Specific High-resolution Mesoscale Model Setup

This report summarizes the findings from an AMU task to determine the best model configuration for operational use at the ER and WFF to best predict winds, precipitation, and temperature. The AMU ran test cases in the warm and cool seasons at the ER and for the spring and fall seasons at WFF. For both the ER and WFF, the ARW core outperformed the NMM core. Results for the ER indicate that the Lin microphysical scheme and the YSU PBL scheme is the optimal model configuration for the ER. It consistently produced the best surface and upper air forecasts, while performing fairly well for the precipitation forecasts. Both the Ferrier and Lin microphysical schemes in combination with the YSU PBL scheme performed well for WFF in the spring and fall seasons. The AMU has been tasked with a follow-on modeling effort to recommended local DA and numerical forecast model design optimized for both the ER and WFF to support space launch activities. The AMU will determine the best software and type of assimilation to use, as well as determine the best grid resolution for the initialization based on spatial and temporal availability of data and the wall clock run-time of the initialization. The AMU will transition from the WRF EMS to NU-WRF, a NASA-specific version of the WRF that takes advantage of unique NASA software and datasets. 37

Watson, Leela R.↗
NASA NTRS2014

Sensitivity of Mesoscale Modeling of Smoke Direct Radiative Effect to the Emission Inventory: a Case Study in Northern Sub-Saharan African Region

An ensemble approach is used to examine the sensitivity of smoke loading and smoke direct radiative effect in the atmosphere to uncertainties in smoke emission estimates. Seven different fire emission inventories are applied independently to WRF-Chem model (v3.5) with the same model configuration (excluding dust and other emission sources) over the northern sub-Saharan African (NSSA) biomass-burning region. Results for November and February 2010 are analyzed, respectively representing the start and end of the biomass burning season in the study region. For February 2010, estimates of total smoke emission vary by a factor of 12, but only differences by factors of 7 or less are found in the simulated regional (15degW-42degE, 13degS-17degN) and monthly averages of column PM(sub 2.5) loading, surface PM(sub 2.5) concentration, aerosol optical depth (AOD), smoke radiative forcing at the top-of-atmosphere and at the surface, and air temperature at 2 m and at 700 hPa. The smaller differences in these simulated variables may reflect the atmospheric diffusion and deposition effects to dampen the large difference in smoke emissions that are highly concentrated in areas much smaller than the regional domain of the study. Indeed, at the local scale, large differences (up to a factor of 33) persist in simulated smoke-related variables and radiative effects including semi-direct effect. Similar results are also found for November 2010, despite differences in meteorology and fire activity. Hence, biomass burning emission uncertainties have a large influence on the reliability of model simulations of atmospheric aerosol loading, transport, and radiative impacts, and this influence is largest at local and hourly-to-daily scales. Accurate quantification of smoke effects on regional climate and air quality requires further reduction of emission uncertainties, particularly for regions of high fire concentrations such as NSSA.

Sahel and sub-Saharan African region↗
DOE OSTI2023

Understanding grain boundary segregation under irradiation: A mesoscale modeling study

Grain boundaries (GBs) are an important component in the design of irradiation resistant materials as they play a crucial role as point defect sinks for non-equilibrium vacancies and self-interstitials. However, in the presence of sustained point defect fluxes, the coupled transport of atomic components with inherently different diffusivities often leads to radiation-induced segregation (RIS), with undesired effects on properties such as intergranular corrosion and stress-assisted cracking. In this talk, we investigate the fundamental mechanisms leading to GB segregation in BCC FeCr-based alloys using multiscale modeling and experiments. A phase-field model is employed to account for both thermodynamic and kinetic segregation mechanisms. The full Onsager transport matrix is derived using kinetic Monte Carlo, molecular dynamics, and kinetic cluster expansion (KineCluE) calculations. The thermodynamics of GB segregation is described via an atomic density-based modification to the CALPHAD free energy. The modeling predictions are then compared against segregation data from atom probe characterization for various temperatures, compositions, and neutron irradiation conditions. We will conclude by discussing the utility of the multiscale modeling approach to shed light on the fundamental mechanisms leading to solute-GB interaction.

36 MATERIALS SCIENCE↗
NASA NTRS2002

CRYSTAL-FACE: A Field Experiment and Modeling Program Focused on Tropical Anvils and Cirrus Layers

The Cirrus Regional Study of Tropical Anvils and Cirrus Layers - Florida Area Cirrus Experiment (CRYSTAL-FACE) is a measurement campaign designed to investigate tropical Cirrus cloud physical properties and formation processes. Understanding the production of upper tropospheric cirrus clouds is essential for the successful modeling of 'he Earth's climate. The deployment phase will occur in July, 2002 in southern Florida, USA. Several aircraft will be used, including the ER-2 and Proteus for cloud remote sensing, the WB-57 and Citation for in situ cloud measurements, the P-3 with a Doppler radar for characterization of convective systems, and the Twin otter for sampling of inflow airmasses. In addition, numerous ground-based and satellite remote sensing measurements will be contributing. A central focus of the mission is improvement of our ability to model cirrus clouds with numerical models. Several research groups with a variety of model types (cloud-resolving models, mesoscale models, weather-prediction models, and general circulation models) will be participating. Our hope is to fully characterize several mulonimbus/cirrus anvil systems that can be used as case studies for testing and improvement of the models. The models will be used for investigating cirrus generation and dissipation processes and the sensitivity of tropical cirrus to convective intensity and aerosol properties. Ultimately, we expect this effort to improve our ability to represent tropical cirrus in GCMs. A general description of the CRYSTAL-FACE program will be presented, with an emphasis on the cloud modeling approach.

Jenson, Eric↗