SEARCH · Engineering Papers

Results for “melt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS2000

Convective Melting of Particles in Flow Under Microgravity Conditions

Study of melting of dispersed or packed solid particles in a fluid under gravity and microgravity conditions provides benchmark information for many engineering applications such as material processing, environmental assessment and protection and space fire protection. During such processes, packed or dispersed solid particles are interacting with fluid flow at above-melting temperatures. By unmasking the buoyancy effects in coupled flow, phase change and heat transport phenomena, a better understanding of melting rate in non-thermal equilibrium, convective conditions can be studied. A series of flight experiments were conducted onboard the NASA KC-135 Microgravity Research Airplane. The Particle Melting in Plow (PMF) module was designed to allow flow through the initially packed ice particles at controlled temperature and velocity. To achieve this, a close-loop flow system was designed. Video images were taken to record the visualization of the melting process, from which a time variation of packed particle thickness distribution at different times can be obtained by the image analysis method. The fluid temperature distribution within the melting zone is measured by thermocouples. An infrared camera was mounted from the top of the test section to record the ice-water thermal images at a given location. The results from thermal images yield local temperature variation between melting solid and liquid and local Stephan number. Typical results for a number of cases are presented. The mathematical model, describing mass, energy, and momentum balance equations for the liquid and solid phases, is presented. It is found that melting rate is influenced mainly by the ratio of Reynolds number (based on the initial particle diameter) to the Froud number, and Stephan number. At the absence of gravity, Froud number approaches zero, Reynolds number and Stephan number become dominant factors governing the melting rate. The numerically determined results are compared with the experimental ones. It is found that the discrepancy between the predicted and measured melting rate is largely due to the inaccuracy in the constitutive equations for effective thermal physical properties, such as effective thermal conductivity and diffusivity, and transport properties, such as particle interaction coefficient, and local heat transfer coefficient of particles.

Stewart, C.↗

NASA NTRS2005

Thermophysical and Optical Properties of Semiconducting Ga2Te3 Melt

The majority of bulk semiconductor single crystals are presently grown from their melts. The thermophysical and optical properties of the melts provide a fundamental understanding of the melt structure and can be used to optimize the growth conditions to obtain higher quality crystals. In this paper, we report several thermophysical and optical properties for Ga2Te3 melts, such as electrical conductivity, viscosity, and optical transmission for temperatures ranging from the melting point up to approximately 990 C. The conductivity and viscosity of the melts are determined using the transient torque technique. The optical transmission of the melts is measured between the wavelengths of 300 and 2000 nm by an dual beam reversed-optics spectrophotometer. The measured properties are in good agreement with the published data. The conductivities indicate that the Ga2Te3 melt is semiconductor-like. The anomalous behavior in the measured properties are used as an indication of a structural transformation in the Ga2Te3 melt and discussed in terms of Eyring's and Bachinskii's predicted behaviors for homogeneous melts.

Li, Chao↗

NASA NTRS2011

Eucrite Impact Melt NWA 5218 - Evidence for a Large Crater on Vesta

Northwest Africa (NWA) 5218 is a 76 g achondrite that is classified as a eucrite [1]. However, an initial classification [2] describes it as a "eucrite shock-melt breccia...(in which) large, partially melted cumulate basalt clasts are set in a shock melt flow...". We explore the petrology of this clast-bearing impact melt rock (Fig. 1), which could be a characteristic lithology at large impact craters on asteroid Vesta [3]. Methods: Optical microscopy, scanning electronmicroscopy, and Raman spectroscopy were used on a thin section (Fig. 1) for petrographic characterization. The impact melt composition was determined by 20 m diameter defocused-beam analyses with a Cameca SX-100 electron microprobe. The data from 97 spots were corrected for mineral density effects [4]. Constituent mineral phases were analyzed with a focusedbeam. Bidirectonal visible and near-infrared (VNIR) and biconical FT-IR reflectance spectra were measured on the surface of a sample slab on its central melt area and on an eucrite clast, and from 125-500 m and <125 m powders of melt. Results: General petrography: The sample specimen is a coherent, medium dark-grey (N4), melt rock. The thin section captures a central, subophitic-textured melt that contains ~1 cm to tens of m-size subangular to rounded, variably-shocked eucrite clasts. Clasts >100 m are coarse-grained with equigranular ~1 mm size plagioclase, quartz, and clinopyroxene (Fig. 1). Single crystals of chromite, ilmenite, zircon, Ca-Mg phosphate, Fe-metal, and troilite are embedded in the melt. Polymineralic clasts are mostly compositionally similar to the above mentioned larger clasts but scarce granulitic fragments are observed as well.

Wittmann, Axel↗

NASA NTRSDate not supplied

Phase Transitions and Melting in the Venusian Basaltic Crust: Implications for Crustal Recycling

Understanding phase transitions and melting in the Venusian crust and the associated changes in density are critical to constrain crustal thickness, recycling, and remelting processes. For example, average surface conditions on Venus of 92 bars and 460 °C correspond to low-grade metamorphic conditions on Earth equivalent to hornfels- and greenschist-facies. Further, the primary igneous mineralogy in the Venusian crust should be replaced by metamorphic minerals over time and potentially melt, as temperatures and pressures increase with depth along geothermal gradients. Here, we use Perple_X (Connolly, 2005), a Gibbs free energy minimization program to calculates table phase equilibria over a range of pressure and temperature conditions for whole-rock compositions of a dry basalt, alkali basalt, and peridotite. Further, we extract mineral abundancies along five geotherms of 5, 10, 15, 20 and 25 °C/km and calculate the rock density after the extraction of melt. On the coldest geotherm of 5 °C/km, melting would start at ~ 197 km and ~121 km in the basalt and alkali basalt, respectively, and therefore at depths that significantly exceed the estimated thickness of the Venusian crust (8-25 km). A density cross-over, where the crustal density would exceed that of the mantle could potentially induce delamination and is estimated to occur at ~ 40 km for both compositions. On the 10 °C/km geotherm, melting of the basalt starts at 65 km and melt extraction only causes a gradual densification due the formation of initially lower melt proportions. In contrast, the alkali basalt starts to melt at a depth of ~ 57 km and the subsequent densification of the residual composition could trigger delamination at ~ 60km depth. For hotter geotherms (i.e., 25 °C/km gradient), melting would occur at shallower depths of 21 – 23 km. However, the basalt will not get significantly denser than the mantle while the residuum of the alkali basalt would reach a density cross-over at 30 km. Hence, differences in Venusian crustal compositions can significantly influence the thickness of the crust on individual geotherms. Our results demonstrate that phase transitions and melting are strongly dependent on the assumed geotherm and could, combined with geodynamic models, further constrain crustal parameters.

Julia Semprich↗

NASA NTRS2022

Diffusion in Melts and Magmas

Diffusion results from random motion of particles and entities. Diffusion in melts and magmas is due to thermally excited random motion of atoms, ions, and clusters, and plays a critical role in magmatic and volcanic processes. In melts and magmas, diffusion is one of the two mechanisms of mass transfer; the other being bulk flow (referred to as convection or advection). When both are present, diffusion refers to the dispersive motion relative to the mean bulk flow in a given reference frame (Richter et al. 1998). Diffusion plays critical roles in controlling magma mixing (Watson 1982; Koyaguchi 1985, 1989; Lesher 1994; Huber et al. 2009; Guo and Zhang 2020), mineral growth and dissolution rates in magmas (e.g., Watson 1982; Harrison and Watson 1983; Zhang et al. 1989; Newcombe et al. 2014; Macris et al. 2018), bubble growth and dissolution rate in magmas (Sparks 1978; Proussevitch and Sahagian 1998; Liu and Zhang 2000; Zhang 2013), and elemental and isotope fractionation during mineral 2 growth and dissolution (Jambon 1980; Richter et al. 1999, 2003; Watson and Muller 2009; Chopra et al. 2012; Watkins et al. 2014, 2017; Holycross et al. 2016, 2018). As a result, diffusion also plays an essential role in explosive volcanic eruptions and magma crystallization. Furthermore, diffusion has important applications in geospeedometry (Lasaga 1983, 1998; Zhang 1994, 2008; Trail et al. 2016; Zhang and Xu 2016). Experimental investigation of diffusion in geologically relevant silicate melts began to flourish in the 1970’s when micro-analytical measurements of diffusion profiles became available. In addition to the vast number of papers published since then, numerous books and reviews are available for diffusion in silicate melts. Hofmann et al. (1974) edited a book titled “Geochemical Transport and Kinetics” published by Carnegie Institution of Washington. This was the first landmark book summarizing the field. Lasaga and Kirkpatrick (1981) edited a book “Kinetics of Geochemical Processes” as volume 8 of the Reviews in Mineralogy (later becoming Reviews in Mineralogy and Geochemistry) series. Zhang and Cherniak (2010) edited “Diffusion in Minerals and Melts” as volume 72 of Reviews of Mineralogy and Geochemistry series, in which one chapter focused on diffusion theory, five chapters on diffusion in silicate melts (Behrens 2010; Lesher 2010; Liang 2010; Zhang and Ni 2010; Zhang et al. 2010), and other chapters were on experimental, analytical, and computational methods, and diffusion in minerals. Several textbooks covered the principles and applications of diffusion theories (Kirkaldy and Young 1987; Shewmon 1989; Cussler 1997; Lasaga 1998; Zhang 2008; Vrentas and Vrentas 2016), and two classic books covered the mathematics of diffusion (Carslaw and Jaeger 1959; Crank 1975). In preparing for this review chapter, we thought carefully about what to cover for this vast field, and decided to briefly go through the fundamentals of diffusion (more complete review can be found in Chakraborty 1995; Zhang 2008, 2010) and solutions to often-encountered 3 diffusion problems, and then focus on post-2010 diffusion studies on silicate melts and magmas. Here, melts refer to (mostly natural) silicate liquid, and magmas refer to crystal-bearing and/or bubble-bearing melts in which the continuous phase is the melt. There is a large body of work on diffusion in glasses, especially in the materials science literature, which is not covered in this review.

Youxue Zhang↗

NASA NTRSDate not supplied

On the Prediction of Surface Melt Over the Greenland Ice Sheet at NWP and S2S Timescales

Greenland surface melt “events” – encompassing large swaths of the ice sheet over approximately 4-10 day periods – have occurred with increasing frequency in the 21st Century. Surface processes are significant to the ice sheet’s overall contribution to sea level. In addition, the sudden onset of widespread surface melt produces hazardous conditions for researchers and for communities adjacent to the ice sheet. The mechanisms producing melt events, their associated large-scale forcing, and timescales of interest are highly variable and poorly understood. Here we examine the predictability of melt events in a numerical weather prediction system (NWP) and a subseasonal-to-seasonal system (S2S). The NASA Global Modeling and Assimilation Office forward processing (GMAO-FP) is an NWP system that incorporates an evolving, global hybrid 4D ensemble–variational (4DEnVar) data assimilation system and a state-of-the-art model that is run twice-daily with forecasts out to five and ten days. The GMAO S2S system is a hindcast-anomaly, coupled-model prediction system initialized with an atmospheric analysis, and in situ and satellite ocean data assimilation. Both systems represent ice sheet surface hydrology and snowpack processes. We examine the performance of the systems over the period 2018-2023, a span that includes approximately nine significant events, against analyses and satellite-derived melt extent. In addition to extent, we examine related conditions and their role in the melt forecast, including the onset of both omega and Rex atmospheric blocking patterns, sea surface temperatures, sea ice extent, water vapor transport, precipitation, and surface preconditioning. We further examine the tendency for false-alarm events in each system and assess reasons for the forecast performance. North Atlantic atmospheric blocking patterns leading to surface melt are well forecast by the NWP system out to around eight days, while the S2S system generally underestimates the magnitude of such events at monthly lead times. These systems suggest that while short term forecasts of ice sheet melt and melt events are relatively robust, S2S predictions of surface conditions are highly dependent on the ability of a coupled system to generate the short-term atmospheric conditions associated with surface melt events.

Richard Cullather↗

NASA NTRS2024

Variations in Apatite F, Cl, and OH Abundances in Primitive Achondrites: Evidence of Fractional Melting?

The apatite group minerals [Ca 5 (PO 4 ) 3 (F,Cl,OH)] are some of the primary mineralogical reservoirs for phosphorus on Earth and a common phosphate mineral within a broad range of extraterrestrial samples. Naturally occurring apatite hosts F, Cl, and OH as essential structural constituents, and all three make up the apatite endmembers fluorapatite, chlorapatite, and hydroxylapatite, respectively. Although apatite is one of the most common phosphate minerals in meteorites and rocks from Earth, it typically occurs at minor to trace abundances. Apatite has been widely used as a mineralogical tool to probe the interiors of both differentiated and undifferentiated parent bodies for information about volatiles; however, little work has been done on apatite F, Cl, and OH abundances of apatite from primitive achondrite meteorites. There are broad differences between apatite X -site chemistry in chondrite parent bodies (typically F-poor) compared to apatite from basaltic rocks from many achondrite parent bodies (Cl-poor, apart from Mars). These differences could indicate that planetary differentiation processes, namely melting, play an important role in the evolution of apatite X -site chemistry. In fact, some ordinary chondrite meteorites that exhibit evidence of minor impact melting have apatite with X -site compositions that are much more F-rich than typical chondrite apatite. McCubbin et al., hypothesized that the F-rich compositions of the apatite in ordinary chondrites affected by impact melting could be the result of apatite partially melting, driving the residual apatite to more F-rich compositions; however, they also indicated that degassing of the more volatile Cl and H may also contribute to the F-enrichment. To further test the partial melting hypothesis, we investigate the F, Cl, and OH (by difference) abundances of apatite from primitive achondrite parent bodies given that they are thought to come from partially differentiated parent bodies that represent residues after partial melting. Consequently, their apatites could provide valuable insights into the effects of melting on apatite X -site chemistry. In this study, we report F and Cl abundances of apatite from a broad array of primitive achondrite meteorites, and we develop a model for apatite fractional melting using known apatite-melt partitioning relationships. Together, we use these results to further elucidate the role of melting on apatite X -site compositions.

F M McCubbin↗

NASA NTRS2024

A Physics-Based Antarctic Melt Detection Technique: Combining Advanced Microwave Scanning Radiometer 2, Radiative-Transfer Modeling, and Firn Modeling

Surface melt on ice shelves has been linked to hydrofracture and subsequent ice shelf breakup. Since the 1990s, scientists have been using microwave radiometers to detect melt on ice shelves and ice sheets by applying various statistical thresholding techniques to identify significant increases in brightness temperature that are associated with melt. In this study, instead of using a fixed threshold, we force the Snow Radiative Transfer model (SMRT) with outputs from the Community Firn Model (CFM) to create a dynamic, physics-based threshold for melt. In the process, we also combine our method with statistical thresholding techniques and produce microwave grain size information in the process. We run this “Hybrid Method” across the Larsen C ice shelf as well as thirteen sites on the Antarctic Ice Sheet. Melt and non-melt days from the Hybrid Method and three statistical thresholding techniques match with surface energy balance within 94±1%; the effect of melt on the passive microwave is mostly binary and thus largely detectable by statistical thresholding techniques as well as physics-based techniques. Rather than always replacing statistical thresholding techniques with the Hybrid Method, we recommend using the Hybrid Method in studies where melt volume or grain size is of interest. In this study, we show that the Hybrid Method can be used to (a) model dry snow brightness temperatures of Antarctic snow and (b) derive a measure of grain size; therefore, it is an important step forwards towards using firn and radiative transfer modeling to quantify melt rather than to simply detect melt days.

Marissa E Dattler↗

DOE OSTI2026

Systematic analysis of melt pool dynamics in laser processing of mixed powder feedstocks

Functionally graded materials (FGMs) fabricated via additive manufacturing of blended powders offer the potential to spatially tailor properties for new technologies, such as fusion first-wall systems, turbine blades, and spacecraft. However, processing these materials is difficult due to the multiplicity of processing parameters to optimize, all of which must be changed as substrate material, powder feedstock compositions, and melt pool dynamics evolve. Here, this work systematically evaluates the qualitative and quantitative effects of these variables on the melt pool size, shape, composition, and particle distribution in an exemplar Ti-Ta system, and connects the experimental results to Marangoni flow behavior and phenomena observed in other systems. Increasing laser power linearly increases melt pool size and layer thickness, driving engineering considerations such as part/geometrical tolerances. Decreasing laser velocity changes the melt pool shape from lenticular to convex and reduces chemical homogeneity due to extreme thermal and compositional gradients between the melt pool center and boundaries. Thermophysical property differences between the powder feedstock and substrate material, as well as the directionality of the gradient, affect dilution and melt pool dynamics, which in turn affect the melt pool boundary characteristics, shape, and uniformity. Mixed powder feedstocks of intermediate compositions do not behave according to linear interpolations between single-material endpoints, instead building taller and wider melt pools. As such, it is recommended to quantify process maps for at least one intermediate composition in the FGM or multi-material system of interest to ensure optimized processing parameters, predictable melt pool sizes and shapes, and compositional and spatial precision.

Dissimilar↗

DOE OSTI2022

Effect of Thermal Expansion Coefficient, Viscosity and Melting Range in Simulation of PCM Embedded Heat Exchangers With and Without Fins

Phase change material heat exchangers (PCMHX) have an important role in integrating renewable energy systems. PCMHX can offer high storage density at various temperatures of interest and can be used for grid load shifting purposes. Numerical models enable engineers to estimate PCMHX performance for different design parameters and operating conditions. Modeling phase change phenomena is challenging due to the complex time-dependent nature of the process. The accuracy of models is highly sensitive to PCM thermo-physical properties. Thermal expansion coefficient (β), viscosity (μ) and melting temperature range (MR) of a PCM are important properties, especially when natural convection is not negligible. In PCMHX modeling, using less than accurate values for these properties can have significant impact on the simulation outcomes. These properties and discussions thereof are not readily available in the literature. This paper presents a brief review of the literature and a numerical study investigating the model sensitivity to the above-mentioned properties for PCMHX with and without fins. CFD is used to evaluate the charging (melting) phenomena. The study quantifies the impact of uncertainty in these properties on the melting rate and temperature profile. Constant wall temperature was considered as heat source with no heat loss to ambient. Here, the results show that β and μ has significant effect on the melting rate and evolution of the melting front. For a non-finned domain when comparing results for different published values of β and μ, the deviation in melting time can be up to 12.9% and 57.6% respectively. For high wall temperatures, change in melting range did not impact melting time. But when the wall temperature is reduced, up to 9.8% deviation in melting time is observed.

CFD↗

DOE OSTI2022

Spatiotemporal evolution of melt ponds on Arctic sea ice

Melt ponds on sea ice play an important role in the Arctic climate system. Their presence alters the partitioning of solar radiation: decreasing reflection, increasing absorption and transmission to the ice and ocean, and enhancing melt. The spatiotemporal properties of melt ponds thus modify ice albedo feedbacks and the mass balance of Arctic sea ice. The Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition presented a valuable opportunity to investigate the seasonal evolution of melt ponds through a rich array of atmosphere-ice-ocean measurements across spatial and temporal scales. In this study, we characterize the seasonal behavior and variability in the snow, surface scattering layer, and melt ponds from spring melt to autumn freeze-up using in situ surveys and auxiliary observations. We compare the results to satellite retrievals and output from two models: the Community Earth System Model (CESM2) and the Marginal Ice Zone Modeling and Assimilation System (MIZMAS). During the melt season, the maximum pond coverage and depth were 21% and 22 ± 13 cm, respectively, with distribution and depth corresponding to surface roughness and ice thickness. Compared to observations, both models overestimate melt pond coverage in summer, with maximum values of approximately 41% (MIZMAS) and 51% (CESM2). This overestimation has important implications for accurately simulating albedo feedbacks. During the observed freeze-up, weather events, including rain on snow, caused high-frequency variability in snow depth, while pond coverage and depth remained relatively constant until continuous freezing ensued. Both models accurately simulate the abrupt cessation of melt ponds during freeze-up, but the dates of freeze-up differ. MIZMAS accurately simulates the observed date of freeze-up, while CESM2 simulates freeze-up one-to-two weeks earlier. This work demonstrates areas that warrant future observation-model synthesis for improving the representation of sea-ice processes and properties, which can aid accurate simulations of albedo feedbacks in a warming climate.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Wind‐Associated Melt Trends and Contrasts Between the Greenland and Antarctic Ice Sheets

Föhn and katabatic winds (downslope winds) can increase ice sheet surface melt, run-off, and ice-shelf vulnerability to hydrofracture and are poorly constrained on the Greenland and Antarctic ice sheets (GIS and AIS). We use regional climate model simulations of the GIS and AIS to quantify and intercompare trends in downslope winds and associated melt since 1960. Results reveal surface melt associated with downslope wind is significant on both the GIS and AIS representing 27.5 ± 4.5% and 19.7 ± 3.8% of total surface melt respectively. Wind-associated melt has decreased 31.8 ± 5.3% on the AIS while total melt decreased 15.4 ± 2.4% due to decreased föhn-induced melt on the Antarctic Peninsula and increasing stratospheric ozone. Wind-associated melt has increased 10.3 ± 2.5% on the GIS, combining with a more positive North Atlantic Oscillation and warmer surface to increase total melt 34 ± 5.8%.

58 GEOSCIENCES↗

DOE OSTI2025

Basal Melting and Oceanic Observations Beneath Central Fimbulisen, East Antarctica

Abstract Basal melting of ice shelves is fundamental to Antarctic ice sheet mass loss, yet direct observations remain sparse. We present the first year‐round melt record (2017–2021) from a phase‐sensitive radar on Fimbulisen, one of the fastest flowing ice shelves in Dronning Maud Land, East Antarctica. The observed long‐term mean ablation rate at 350 m depth below the central ice shelf was 1.0 ± 0.5 m yr −1 , marked by substantial sub‐weekly variability ranging from 0.4 to 3.5 m yr −1 . 36‐h filtered basal melt rate fluctuations closely align with ocean velocity. On seasonal time scales, melt rates peak during austral spring to autumn (September–March), driven by both elevated ocean velocities and thermal driving near the base. The combined effect of thermal driving and current speed explains the majority of the melt rate variability ( r = 0.84), highlighting the dominant role of shear‐driven turbulence. This relationship enables parameterization of melt rates for the decade‐long ocean record (2010–2021), although deviations appear under low and high forcing conditions. Both observed and parameterized melt rates show similar yearly mean magnitudes compared to satellite‐derived melt rates but with a tenfold lower seasonal amplitude and a 3‐month delay in seasonality. These detailed concurrent ice–ocean observations provide essential validation data for remote sensing and numerical models that aim to quantify and project ice‐shelf response to a change in ocean forcing. In situ measurements and continued monitoring are crucial for accurately assessing and modeling future basal melt rates, and for understanding the complex dynamics driving ice‐shelf stability and sea‐level change.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Size-dependent second-order-like phase transitions in Fe nanocluster melting from low-temperature structural isomerization

Here, in this work, the melting phase transitions of Fe n nanoclusters with 10 ≤ n ≤ 100 atoms are investigated using classical many-body molecular dynamics simulations. For many cluster sizes, surface melting occurs at much lower temperatures than core melting. Surface and core melting points and energetic melting points (temperatures of maximum heat capacity, C v ) are calculated for all cluster sizes. Melting properties are found to be strong functions of cluster structure. Cluster sizes with closed-shell structures always have first-order-like phase transitions. Almost one-third of cluster sizes in the analyzed range exhibit second-order-like phase transitions due to the presence of multiple structural configurations close in energy. 1-shell clusters with one to a few more atoms than a neighboring closed-shell structure have very low surface melting points and very high energetic melting points compared to their closed-shell counterparts. In clusters above 50 atoms with certain core structures, melting of the surface before the core was observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Viscosity of glass-forming melt at the bottom of high-level waste melter feed cold caps: Effects of temperature and incorporation of solid components

At the final stages of conversion of melter feed (glass batch) to molten glass, the transient glass-forming melt becomes a continuous liquid phase encapsulating dissolving solid particles and gas bubbles that produce primary foam at the bottom of the cold cap (the reacting melter feed in an electric glass melting furnace). The glass-forming melt viscosity plays a dominant role in primary foam formation, stability, and eventual collapse, thus affecting the rate of melting (the glass production rate per cold cap area). For several melter feeds designed for nuclear waste vitrification, we have traced the glass-forming melt viscosity during the final stages of feed-to-glass conversion as it changes in response to changing temperature and composition (resulting from dissolving solid particles). Starting with a relatively low values at the moment when the melt connects, melt viscosity reaches maximum within the primary foam layer and then decreases to its final melter-operating temperature value. We paid a particular attention to the cold-cap bottom—the boundary between the primary foam layer and the thermal boundary layer—where the melt viscosity affects the rate of melting predominantly through its effect on the temperature at which primary foam is collapsing.

Lee, Seung Min↗

DOE OSTI2020

A protocol for calculating basal melt rates in the ISMIP6 Antarctic ice sheet projections

Climate model projections have previously been used to compute ice shelf basal melt rates in ice sheet models, but the strategies employed – e.g., ocean input, parameterization, calibration technique, and corrections – have varied widely and are often ad hoc. Here, a methodology is proposed for the calculation of circum-Antarctic basal melt rates for floating ice, based on climate models, that is suitable for ISMIP6, the Ice Sheet Model Intercomparison Project for CMIP6 (6th Coupled Model Intercomparison Project). The past and future evolution of ocean temperature and salinity is derived from a climate model by estimating anomalies with respect to the modern day, which are added to a present-day climatology constructed from existing observational datasets. Temperature and salinity are extrapolated to any position potentially occupied by a simulated ice shelf. A simple formulation is proposed for a basal melt parameterization in ISMIP6, constrained by the observed temperature climatology, with a quadratic dependency on either the nonlocal or local thermal forcing. Two calibration methods are proposed: (1) based on the mean Antarctic melt rate (MeanAnt) and (2) based on melt rates near Pine Island's deep grounding line (PIGL). Future Antarctic mean melt rates are an order of magnitude greater in PIGL than in MeanAnt. The PIGL calibration and the local parameterization result in more realistic melt rates near grounding lines. PIGL is also more consistent with observations of interannual melt rate variability underneath Pine Island and Dotson ice shelves. This work stresses the need for more physics and less calibration in the parameterizations and for more observations of hydrographic properties and melt rates at interannual and decadal timescales.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1989

Heterogeneous dissemination of projectile materials in the impact melts from Wabar crater, Saudi Arabia

The initial observations of Spencer (1933) that two distinct impact melts coexist at the 90-m-diameter Wabar crater, Saudi Arabia, is confirmed. A dark or 'black' melt contains on the order of 4 percent meteoritic contamination, while the transparent or 'white' melt contains less than 1 percent. The Fe/Ni ratios in both varieties exhibit considerable scatter on electron-microprobe scales, akin to those reported by others for metal spherules in the black melt. If the meteoritic component is subtracted, both melts are chemically very similar. Clasts engulfed by the Wabar melts were investigated also, as they represent the progenitor lithologies from which the melts formed. Bulk compositions for these clasts reveal subtle differences in modal feldspar content within the quartz-rich Wabar target. Both melts require that a minimum of two target lithologies be present in the Wabar melt zone.

Horz, F.↗

NASA NTRS1991

Lunar anorthosites, their equilibrium melts and the bulk moon

The present study uses plagioclase compositions and partition coefficients for several elements to estimate melts from which lunar anorthosites formed and the partition liquids from which these melts were derived. The Fe and Mg contents of the plagioclases are examined for their potential use as predictors of Fe and Mg in associated melts. Usable trace elements are employed with selected partition coefficients to predict the equilibrium melts for lunar anorthosites, and melts for anorthosites are used in various models to calculate the composition of the initial melt from which the lunar mantle and eventually the anorthosites evolved. The initial melts are compared with bulk moon compositions to evaluate the nature of the melting that could have produced the anorthosites. All the models indicate that extensive melting of all or nearly all of the lunar mantle is required to produce a lunar crust that constitutes 13-15 percent of the moon's volume.

Phinney, W. C.↗