Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “magma”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Experimental Constraints on a Vesta Magma Ocean

A magma ocean model was devised to relate eucrites (basalts) and diogenites (orthopyroxenites), which are found mixed together as clasts in a suite of polymict breccias known as howardites. The intimate association of eucritic and diogenitic clasts in howardites argues strongly that these three classes of achondritic meteorites all originated from the same planetoid. Reflectance spectral evidence (including that from the DAWN mission) has long suggested that Vesta is indeed the Eucrite Parent Body. Specifically, the magma ocean model was generated as follows: (i) the bulk Vesta composition was taken to be 0.3 CV chondrite + 0.7 L chondrite but using only 10% of the Na2O from this mixture; (ii) this composition is allowed to crystallize at 500 bar until approx. 80% of the system is solid olivine + low-Ca pyroxene; (iii) the remaining 20% liquid crystallizes at one bar from 1250C to 1110C, a temperature slightly above the eucrite solidus. All crystallization calculations were performed using MELTS. In this model, diogenites are produced by cocrystallization of olivine and pyroxene in the >1250C temperature regime, with Main Group eucrite liquids being generated in the 1300-1250C temperature interval. Low-Ca pyroxene reappears at 1210C in the one-bar calculations and fractionates the residual liquid to produce evolved eucrite compositions (Stannern Trend). We have attempted to experimentally reproduce the <1250C portion of the MELTS Vesta magma ocean. In the MELTS calculation, the change from 500 bar to one bar results in a shift of the olivine:low-Ca pyroxene boundary so that the 1250C liquid is now in the olivine field and, consequently, olivine should be the first-crystallizing phase, followed by low-Ca pyroxene at 1210C, and plagioclase at 1170C. Because at one bar the olivine:low-Ca pyroxene boundary is a peritectic, fractional crystallization of the 1210C liquid proceeds with only pyroxene crystallization until plagioclase appears. Thus, the predictions of the MELTS calculation are clear and straightforward.

Hoff, C.↗
NASA NTRS2016

The Mineralogy, Geochemistry, and Redox State of Multivalent Cations During the Crystallization of Primitive Shergottitic Liquids at Various (f)O2. Insights into the (f)O2 Fugacity of the Martian Mantle and Crustal Influences on Redox Conditions of Martian Magmas.

The (f)O2 [oxygen fugacity] of crystallization for martian basalts has been estimated in various studies to range from IW-1 to QFM+4 [1-3]. A striking geochemical feature of the shergottites is the large range in initial Sr isotopic ratios and initial epsilon(sup Nd) values. Studies by observed that within the shergottite group the (f)O2 [oxygen fugacity] of crystallization is highly correlated with these chemical and isotopic characteristics with depleted shergottites generally crystallizing at reduced conditions and enriched shergottites crystallizing under more oxidizing conditions. More recent work has shown that (f)O2 [oxygen fugacity] changed during the crystallization of these magmas from one order of magnitude in Y980459 (Y98) to several orders of magnitude in Larkman Nunatak 06319. These real or apparent variations within single shergottitic magmas have been attributed to mixing of a xenocrystic olivine component, volatile loss-water disassociation, auto-oxidation during crystallization of mafic phases, and assimilation of an oxidizing crustal component (e.g. sulfate). In contrast to the shergottites, augite basalts such as NWA 8159 are highly depleted yet appear to be highly oxidized (e.g. QFM+4). As a first step in attempting to unravel petrologic complexities that influence (f)O2 [oxygen fugacity] in martian magmas, this study explores the effect of (f)O2 [oxygen fugacity] on the liquid line of descent (LLD) for a primitive shergottite liquid composition (Y98). The results of this study will provide a fundamental basis for reconstructing the record of (f)O2 [oxygen fugacity] in shergottites and other martian basalts, its effect on both mineral chemistries and valence state partitioning, and a means for examining the role of crystallization (and other more complex processes) on the petrologic linkages between olivine-phyric and pyroxene-plagioclase shergottites.

Shearer, C. K.↗
NASA NTRS2020

Reconstructing Magma Storage Depths for the 2018 Kilauean Eruption from melt inclusion CO2 Contents: The importance of Vapor Bubbles

The 2018 Lower East Rift Zone (LERZ) eruption of Kīlauea Volcano and the accompanying collapse of the summit caldera marked the most destructive phase of activity on Hawai’i in the last 200 years. The integration of petrological data extracted from lava samples collected throughout the eruption with geodetic data examining the caldera collapse event, and estimates of the co-erupted flux of SO2 from the main eruptive fissure (Fissure 8), provides an exceptional opportunity to determine the reservoir geometry and magma transport paths supplying Kīlauea’s LERZ. The forsterite contents of erupted olivines and the degree of disequilibrium with their carrier melts indicate that two distinct olivine populations were erupted from Fissure 8. Melt inclusion entrapment pressures reveal that more evolved olivines (Fo<81.5) crystallized at ~2 km depth within the shallower Halema’uma’u reservoir, while more primitive olivines (Fo>81.5)crystallized within the deeper South Caldera reservoir at ~3–5 km depth. Crucially, primitive olivines experienced extensive post-entrapment crystallization, driving the growth of a vapor bubble. Raman spectroscopy reveals that this bubble contains up to 99% of the total inclusionCO2 budget (median=93%). Measurements of CO2 in only the glass phase would have underestimated entrapment depths by up to 60× (median=11×), and the importance of the SC reservoir as a source of magma to Fissure 8 would have been overlooked. Overall, we demonstrate that Raman measurements of bubbles, along with careful choice of suitably-calibrated H2O-CO2 solubility model, is vital to place accurate constraints on the depths of magma storage regions supplying volcanic eruptions.

SIMS↗
NASA NTRSDate not supplied

Assimilation of Fossil Hydrothermal Sulfide by Early Amazonian Martian Magmas: Implications for Ore Mineralization on Mars

Martian magmas would interact with any hydrosphere present, whether a global ocean [e.g., 1] or an icy (subterranean) hydrosphere [2] creating hydrothermal systems. Volcanogenic massive sulfide (VMS) ores, with Fe-Zn-Pb sulfides, created by hydrothermal deposition associated with a wide range of volcanism would be expected on Mars [3]. Similar to terrestrial komatiites, martian igneous rocks could generate orthomagmatic Ni-sulfide ore deposits by immiscible sulfide liquid segregation [4]. For this to occur, a martian magma would need to flow over (or intrude into) a pre-existing sulfur-rich formation. Here, we elaborate on the first evidence [5-6] of potential orthomagmatic mineralization in two Early Amazonian (2.4 Ga) igneous meteorites [7-8] involving a threestep process: i) formation of Fe-Zn-Pb sulfides, (ii) assimilated by the 2.4 Ga magmas leading to (iii) formation of orthomagmatic Ni-sulfide deposits. These deposits may remain on Mars, but the telltale signs of Zn-Pb enrichment and Ni-Co depletion in the two meteorites provide important insights into martian geology.

M Humayun↗
NASA NTRS2017

Imaging a Free-Geometry Magma Reservoir Using FEM-Based Linear Inverse Modeling of InSAR Data: Application to Rabaul Caldera, Papua New Guinea

We test an innovative inversion scheme using Green’s functions from an array of pressure sources embedded in finite-element method (FEM) models to image, without assuming an a-priori geometry, the composite and complex shape of a volcano deformation source. We invert interferometric synthetic aperture radar (InSAR) data to estimate the pressurization and shape of the magma reservoir of Rabaul caldera, Papua New Guinea. The results image the extended shallow magmatic system responsible for a broad and long-term subsidence of the caldera between 2007 February and 2010 December. Elastic FEM solutions are integrated into the regularized linear inversion of InSAR data of volcano surface displacements in order to obtain a 3-D image of the source of deformation. The Green’s function matrix is constructed from a library of forward line-of-sight displacement solutions for a grid of cubic elementary deformation sources. Each source is sequentially generated by removing the corresponding cubic elements from a common meshed domain and simulating the injection of a fluid mass flux into the cavity, which results in a pressurization and volumetric change of the fluidfilled cavity. The use of a single mesh for the generation of all FEM models avoids the computationally expensive process of non-linear inversion and remeshing a variable geometry domain. Without assuming an a-priori source geometry other than the configuration of the 3-D grid that generates the library of Green’s functions, the geodetic data dictate the geometry of the magma reservoir as a 3-D distribution of pressure (or flux of magma) within the source array. The inversion of InSAR data of Rabaul caldera shows a distribution of interconnected sources forming an amorphous, shallow magmatic system elongated under two opposite sides of the caldera. The marginal areas at the sides of the imaged magmatic system are the possible feeding reservoirs of the ongoing Tavurvur volcano eruption of andesitic products on the east side and of the past Vulcan volcano eruptions of more evolved materials on the west side. The interconnection and spatial distributions of sources correspond to the petrography of the volcanic products described in the literature and to the dynamics of the single and twin eruptions that characterize the caldera. The ability to image the complex geometry of deformation sources in both space and time can improve our ability to monitor active volcanoes, widen our understanding of the dynamics of active volcanic systems and improve the predictions of eruptions.

Inverse theory↗
NASA NTRS2017

Imaging the Complex Geometry of a Magma Reservoir Using Fem-Based Linear Inverse Modeling of InSAR Data: Application to Rabaul Caldera, Papua New Guinea

We test an innovative inversion scheme using Green’s functions from an array of pressure sources embedded in finite-element method (FEM) models to image, without assuming an a-priori geometry, the composite and complex shape of a volcano deformation source. We invert interferometric synthetic aperture radar (InSAR) data to estimate the pressurization and shape of the magma reservoir of Rabaul caldera, Papua New Guinea. The results image the extended shallow magmatic system responsible for a broad and long-term subsidence of the caldera between 2007 February and 2010 December. Elastic FEM solutions are integrated into the regularized linear inversion of InSAR data of volcano surface displacements in order to obtain a 3-D image of the source of deformation. The Green’s function matrix is constructed from a library of forward line-of-sight displacement solutions for a grid of cubic elementary deformation sources. Each source is sequentially generated by removing the corresponding cubic elements from a common meshed domain and simulating the injection of a fluid mass flux into the cavity, which results in a pressurization and volumetric change of the fluid-filled cavity. The use of a single mesh for the generation of all FEM models avoids the computationally expensive process of non-linear inversion and remeshing a variable geometry domain. Without assuming an a-priori source geometry other than the configuration of the 3-D grid that generates the library of Green’s functions, the geodetic data dictate the geometry of the magma reservoir as a 3-D distribution of pressure (or flux of magma) within the source array. The inversion of InSAR data of Rabaul caldera shows a distribution of interconnected sources forming an amorphous, shallow magmatic system elongated under two opposite sides of the caldera. The marginal areas at the sides of the imaged magmatic system are the possible feeding reservoirs of the ongoing Tavurvur volcano eruption of andesitic products on the east side and of the past Vulcan volcano eruptions of more evolved materials on the west side. The interconnection and spatial distributions of sources correspond to the petrography of the volcanic products described in the literature and to the dynamics of the single and twin eruptions that characterize the caldera. The ability to image the complex geometry of deformation sources in both space and time can improve our ability to monitor active volcanoes, widen our understanding of the dynamics of active volcanic systems and improve the predictions of eruptions.

Inverse theory↗
NASA NTRS2026

Synchronized Eruptions on Io: Possible Evidence of Interconnected Subsurface Magma Reservoirs

On 27 December 2024, Juno's JIRAM (Jovian InfraRed Auroral Mapper) instrument observed an unprecedented volcanic event in Io's southern hemisphere, covering a vast region of ∼65,000 km2, near 73°S, 140°E. Within the imaged region, only one hot spot was previously known (Pfd454). This feature was earlier estimated to cover an area of 300 km2 with a total power output of 34 GW. JIRAM results show that the region produces a power output of 140–260 TW, over 1,000 times higher than earlier estimates and likely exceeding the brightest eruption ever recorded on Io, that of Surt in 2001 (∼80 TW). Three adjacent hot spots also exhibited dramatic power increases: P139, PV18, and an unnamed feature south of the main one that surged to ∼1 TW, placing all of them among the top 10 most powerful hot spots observed on Io. A temperature analysis of the features supports the simultaneous onset of these brightenings and suggests a single eruptive event propagating beneath the surface across hundreds of kilometers; this is the first time this has been observed on Io. This in turn would imply a connection among the hotspots' magma reservoirs, while other nearby hotspots that have been known to be active in the recent past, such as Kurdalagon Patera, appear unaffected. The simultaneity supports models of massive, interconnected magma reservoirs. The topology of these regional magma systems may resemble that of a large-scale sponge, in which the massive reservoirs are the pores, interconnected through a largely solid outer shell.

A Mura↗
DOE OSTI2025

Shock compression of FeOOH and implications for iron-water interactions in super-earth magma oceans

Iron(Fe)-water reactions in a magma ocean can influence water storage and density of planets. These reactions can form Fe-O-H phases, whose density, melting, and electronic properties at planetary interior conditions are important for informing planetary models. Here, we study natural goethite (α-FeOOH) that is shock-compressed along its principal Hugoniot. Analysis of our velocity interferometer system for any reflector (VISAR) results extends the equation of state to over 800 GPa. X-ray diffraction and VISAR reflectivity results indicate the onset of melting occurs at ~95 GPa with complete melting by 166 GPa, which may be relevant to low seismic velocity anomalies observed above the core-mantle boundary. Analysis of X-ray emission spectroscopy results up to 285 GPa shows the spin crossover of Fe, with dominantly low spin Fe above ~265 GPa in the melt, supporting formation of dense basal magma oceans in terrestrial planets. Using our measured FeOOH densities, we model planetary interiors up to 10 Earth masses. Assuming FeOOH forms via iron-water reactions, the radius decreases by up to 28%, while the density increases by up to 165% compared to the unreacted cases, providing an avenue to investigate water storage and evolution in super-Earths and sub-Neptunes.

Zhang, Yanyao [Stanford Univ., CA (United States)]↗
DOE OSTI2021

Surface-wave tomography of the Emeishan large igneous province (China): Magma storage system, hidden hotspot track, and its impact on the Capitanian mass extinction

Large igneous provinces (LIPs) are commonly associated with mass extinctions. However, the precise relations between LIPs and their impacts on biodiversity is enigmatic, given that they can be asynchronous. It has been proposed that the environmental impacts are primarily related to sill emplacement. Therefore, the structure of LIPs' magma storage system is critical because it dictates the occurrence and timing of mass extinction. We use surface-wave tomography to image the lithosphere under the Permian Emeishan large igneous province (ELIP) in southwestern China. We find a northeast-trending zone of high shear-wave velocity (Vs) and negative radial anisotropy (Vsv > Vsh; v and h are vertically and horizontally polarized S waves, respectively) in the crust and lithosphere. We rule out the possibilities of rifting or orogenesis to explain these seismic characteristics and interpret the seismic anomaly as a mafic-ultramafic, dike-dominated magma storage system of the ELIP. We further propose that the anomaly represents a hidden hotspot track that was emplaced before the ELIP eruption. A zone of higher velocity but less-negative radial anisotropy, on the hotspot track but to the northeast of the eruption center in the Panxi region, reflects an elevated proportion of sills emplaced at the incipient stage of the ELIP. Liberation of poisonous gases by the early sill intrusions explains why the mid-Capitanian global biota crisis preceded the peak ELIP eruption by 2–3 m.y.

58 GEOSCIENCES↗
NASA NTRS1972

Luna 16 sample G36 - Another crystalline product of an extremely mafic magma.

Luna 16 sample G36 is a microbasalt containing skeletal olivine, plagioclase, ilmenite, and interstitial pyroxene. It apparently resulted from very rapid crystallization of a highly fractionated, totally liquid mafic magma. Although different in many details, G36 is generally similar to the ferromagnesian-rich Apollo 11 and 12 basalts. In this respect, it emphasizes the continuing problem of identifying a process on the moon which generated highly mafic magmas.

Hollister, L. S.↗
NASA NTRS1974

Composition of the gases associated with the magmas that produced rocks 15016 and 15065

Gases may be trapped in crystallizing minerals in many different ways but gas analyses can provide geologically meaningful information only if the gases can be related to their specific locations in the host mineral. The gases trapped in glass inclusions can be representative samples of the gases associated with the magma adjacent to the mineral at the time it crystallized. Analyses of the gases in glass inclusions in gabbro 15065,44 and basalt 15016,48 show that in both cases the gases in the parent magma started with a composition close to 46% oxygen, 42% carbon and 12% hydrogen and became more water-rich as crystallization progressed. This enrichment is probably due to a selective removal of the less soluble carbon compounds into the vapor phase. Some of the volatile components may react with the rock as temperature falls to give siderite and possibly hydrous phases.

Barker, C.↗
NASA NTRS1977

Magma oceanography. II - Chemical evolution and crustal formation

A description is presented of an empirical model of fractional crystallization which predicts that slightly modified versions of certain of the proposed whole moon compositions can reproduce the major-element chemistry and mineralogy of most of the primitive highland rocks through equilibrium and fractional crystallization processes combined with accumulation of crystals and trapping of residual liquids. These compositions contain sufficient Al to form a plagioclase-rich crust 60 km thick on top of a magma ocean that was initially no deeper than about 300 km. Implicit in the model are the assumptions that all cooling and crystallization take place at low pressure and that there are no compositional or thermal gradients in the liquid. Discussions of the cooling and crystallization of the proposed magma ocean show these assumptions to be disturbingly naive when applied to the ocean as a whole. However, the model need not be applied to the whole ocean, but only to layers of cooling liquid near the surface.

Longhi, J.↗
NASA NTRS1977

Chemical variation and fractionation of KREEP basalt magmas

The fact that 53 Apollo 15 igneous KREEP basalts show a range of 100 Mg/(Mg + Fe) from 73 to 35, and that there are systematic variations in K2O and trace element abundances with the Mg/(Mg + Fe) ratio, suggests that the KREEP basalts are a magma series generated by fractional crystallization processes. Experimental and chemical evidence indicate that this magma series results from low-pressure, possibly subvolcanic, fractional crystallization of a magnesian parental liquid (100 Mg/(Mg + Fe) equal to approximately 72) by removal of low-Ca pyroxene and plagioclase, with eventual production of liquids similar in composition to 15405 quartz-monozodiorites. One soil sample, SAO 465-11, corresponds to the postulated parental liquid, which might have been a direct partial melt of troctolitic materials in the deep lunar crust.

Irving, A. J.↗
NASA NTRS1978

The case for at least three mare basalt magmas at the Luna 24 landing site

Petrographic and electron microprobe studies have been carried out for 1230 particles from the Luna 24 drill core. At least three mare basalts were distinguished on the basis of major and minor element chemical compositions of pyroxenes. Mg-rich monomineralic particles of olivine and pyroxene defined one major type. The other two magmas were identified by the Ti/(Ti + Cr) ratio at constant Fe/(Fe + Mg) ratio in pyroxenes derived from polymineralic igneous lithic fragments. Whole rock chemical analyses for V and Cr also provided evidence for these distinct magmas.

Nielsen, R. L.↗
NASA NTRS1980

Output rate of magma from active central volcanoes

For part of their historic records, nine of the most active volcanoes on earth have each erupted magma at a nearly constant rate. These output rates are very similar and range from 0.69 to 0.26 cu m/s. The volcanoes discussed - Kilauea, Mauna Loa, Fuego, Santiaguito, Nyamuragira, Hekla, Piton de la Fournaise, Vesuvius and Etna - represent almost the whole spectrum of plate tectonic settings of volcanism. A common mechanism of buoyantly rising magma-filled cracks in the upper crust may contribute to the observed restricted range of the rates of output.

Wadge, G.↗
NASA NTRS1981

Ascent and eruption of basaltic magma on the earth and moon

The ascent and emplacement of basaltic magma on the earth and moon is modeled by the application of geological and physical observations and constraints. Relatively simple mathematical models of the motion of gas/liquid mixtures are shown to be adequate in the treatment of basaltic eruptions, provided that allowance is made for the coalescence of gas bubbles and that realistic geological and petrochemical constraints are applied to the numerical values of variables. Because gas exsolution from magmas on the earth and moon commonly occur at depths of less than 2 km, it is generally convenient to consider separately the rise of bubble-free magmatic liquid at depth in a planetary crust and the more complex motions occurring near the surface with gas exsolution.

Wilson, L.↗
NASA NTRS1981

The variation of magma discharge during basaltic eruptions

The different types of magmatic flow in basaltic eruptions are discussed, and processes explaining the eruptive history of specific volcanoes are investigated. The effusion rate curve is divided into waxing and waning flow parts, and the ideal, elastic response of the reservoir in the waning phase is analytically shown. Historical eruption rates of Mauna Loa, Kilauea, and Etna are presented, demonstrating that for each volcano there is a trend of decreasing rate with increasing duration of eruption, a relationship not predicted by a simple elastic model of magma release. The eruptive histories of these volcanoes is explained by the processes of modification of the eruptive conduits and the continued supply of magma from depth during eruption. Discharge variations from Paricutin, Hekla, and Kilauea Iki are discussed in detail.

Wadge, G.↗
NASA NTRS1982

Magma vesiculation and pyroclastic volcanism on Venus

Theoretical consideration of the magma vesiculation process under observed and inferred venusian surface conditions suggests that vesicles should form in basaltic melts, especially if CO2 is the primary magmatic volatile. However, the high surface atmospheric pressure (about 90 bars) and density on Venus retard bubble coalescence and disruption sufficiently to make explosive volcanism unlikely. The products of explosive volcanism (fire fountains, convecting eruption clouds, pyroclastic flows, and topography-mantling deposits of ash, spatter, and scoria) should be rare on Venus, and effusive eruptions should dominate. The volume fraction of vesicles in basaltic rocks on Venus are predicted to be less than in chemically similar rocks on earth. Detection of pyroclastic landforms or eruption products on Venus would indicate either abnormally high volatile contents of Venus magmas (2.5-4 wt%) or different environmental conditions (e.g., lower atmospheric pressure) in previous geologic history.

Garvin, J. B.↗