Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mafics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Large-Scale Impact Cratering and Early Earth Evolution

The surface of the Moon attests to the importance of large-scale impact in its early crustal evolution. Previous models of the effects of a massive bombardment on terrestrial crustal evolution have relied on analogies with the Moon, with allowances for the presence of water and a thinner lithosphere. It is now apparent that strict lunar-terrestrial analogies are incorrect because of the "differential scaling" of crater dimensions and melt volumes with event size and planetary gravity. Impact melt volumes and "ancient cavity dimensions for specific impacts were modeled according to previous procedures. In the terrestrial case, the melt volume (V(sub m)) exceeds that of the transient cavity (V(sub tc)) at diameters > or = 400 km. This condition is reached on the Moon only with transient cavity diameters > or = 3000 km, equivalent to whole Moon melting. The melt volumes in these large impact events are minimum estimates, since, at these sizes, the higher temperature of the target rocks at depth will increase melt production. Using the modification-scaling relation of Croft, a transient cavity diameter of about 400 km in the terrestrial environment corresponds to an expected final impact "basin" diameter of about 900 km. Such a "basin" would be comparable in dimensions to the lunar basin Orientale. This 900-km "basin" on the early Earth, however, would not have had the appearance of Orientale. It would have been essentially a melt pool, and, morphologically, would have had more in common with the palimpsests structures on Callisto and Ganymede. With the terrestrial equivalents to the large multiring basins of the Moon being manifested as muted palimpsest-like structures filled with impact melt, it is unlikely they played a role in establishing the freeboard on the early Earth. The composition of the massive impact melt sheets (> 10 (exp 7) cu km) produced in "basin-forming" events on the early Earth would have most likely ranged from basaltic to more mafic for the largest impacts, where the melt volume would have reached well into the mantle. Any contribution from adiabatic melting or shock heating of the asthenosphere would have had similar mafic compositions. The depth of the melt sheets is unknown but would have been in the multilkilometer range. Bodies of basaltic melt > or = 300 m thick differentiate in the terrestrial environment, with the degree of differentiation being a function of the thickness of the body. We therefore expect that these thick, closed-system melt pools would have differentiated into an ultramafic-mafic base and felsic top. If only 10% of the impact melt produced in a single event creating a 400-km diameter transient cavity evolved into felsic differentiates, they would be comparable in volume to the Columbia River basalts. It has been estimated that at least 200 impact events of this size or larger occurred on the early Earth during a period of heavy bombardment. We speculate that these massive differentiated melt sheets may have had a role in the formation of the initial felsic component of the Earth's crust. Additional information is contained in the original.

Grieve, R. A. F.↗

Characterization of Martian Soil Fines Fraction in SNC Meteorites

Some impact-melt glasses in shergottite meteorites contain large abundances of martian atmospheric noble gases with high (129)Xe/(132)Xe ratios, accompanied by varying (87)Sr/(86)Sr (initial) ratios. These glasses contain Martian Soil Fines (MSF) probably from young volcanic terrains such as Tharsis or Elysium Mons. The composition of the MSF bearing samples is different from the average bulk composition of the host rock. These samples show the following charecteristics: a) simultaeneous enrichment of the felsic component and depletion of the mafic component relative to the host phase and b) significant secondary sulfur/sulfate excesses over the host material. The degree of enrichment and associated depletion varies from one sample to another. Earlier, we found large enrichments of felsic (Al, Ca, Na and K) component and depletion of mafic (Fe, Mg, Mn and Ti) component in several impact melt glass veins and pods of samples ,77 ,78 , 18, and ,20A in EET79001 accompanied by large sulfur/sulfate excesses. Based on these results, we proposed a model where the comminution of basaltic rocks takes place by meteoroid bombardment on the martian surface, leading to the generation of fine-grained soil near the impact sites. This fine-grained soil material is subsequently mobilized by saltation and deflation processes on Mars surface due to pervasive aeolian activity. This movement results in mechanical fractionation leading to the felsic enrichment and mafic depletion in the martian dust. We report, here, new data on an impact-melt inclusion ,507 (PAPA) from EET79001, Lith B and ,506 (ALPHA) from EET79001, Lith A and compare the results with those obtained on Shergotty impact melt glass (DBS).

Rao, M. N.↗

Highly Siderophile Element Abundances in Martian Meteorites

Critical evaluation of new and literature data for highly siderophile elements (HSE) in Martian (SNC) meteorites allows several first order conclusions to be drawn. (i) Re concentrations in SNC meteorites are nearly constant (within a factor of two) and do not correlate with rock type. Exceptions to this rule are Chassigny and Dar al Gani (DaG) 476, both of which are inferred to have experienced terrestrial Re contamination. (ii) Fractionations between Rh and Pd are small. Excluding Shergotty, the Rh/Pd ratio of the SNC suite is 0.22\pm0.05. (iii) Os and Ir contents vary by about four orders of magnitude; and positive correlations with MgO, Cr, and Ni suggest that these variations are not controlled by sulfide fractionation. A possible exception is the orthopyroxenite ALH84001, whose HSE's (including Ni, which is compatible in opx) are very low. (iv) Zagami, Shergotty, and Nakhla have nearly identical HSE signatures. Shergotty and Zagami have experienced assimilation-fractional crystallization (AFC) and have "crustal" Sr and Nd isotopic signatures. Conversely, the Nakhla parent was a small degree partial melt of a depleted mantle that interacted little with the Martian crust. These observations suggest that "evolved" HSE signatures can be produced by either fractional crystallization or small degrees of partial melting. (v) Chassigny and other mafic SNC's have HSE signatures that are very distinct from those of Nakhla-Zagami-Shergotty. The HSE elemental ratios of mafic SNC's approach chondritic, implying that the Martian mantle has nearly chondritic relative abundances of the HSE's. (vi) This chondritic HSE signature is observed in SNC's of various ages, suggesting that this is an ancient feature that has not evolved over time. (vii) No correlation is observed between HSE's and signatures of crustal contamination (e.g., Sr isotopes), indicating that the HSE signatures of the SNC suite are not derived from the crust. (vii) The Ru/Pd for the SNC suite ratio is about 0.5 chondritic. We attribute this depletion of Ru to the presence of spinel in the SNC source regions. (viii) Assignment of this depletion of Ru to spinel seems to also imply that spinel is not the cause of Os and Ir fractionations, requiring some other mafic phase to account for the observed variations. -----.

Jones, J. H.↗

Geologic History of Asteroid 4 Vesta

Some types of meteorites - most irons, stony irons, some achondrites - hail from asteroids that were heated to the point where magmatism occurred within a very few million years of the formation of the earliest solids in the solar system. The largest clan of achondrites, the howardite, eucrite and diogenite (HED) meteorites, represent the crust of their parent asteroid]. Diogenites are cumulate harzburgites and orthopyroxenites from the lower crust whilst eucrites are basalts, diabases and cumulate gabbros from the upper crust. Howardites are impact-engendered breccias mostly of diogenites and eucrites. There remains only one large asteroid with a basaltic crust, 4 Vesta, which is thought to be the source of the HED clan. Differentiation models for Vesta are based on HED compositions. Proto-Vesta consisted of chondritic materials containing Al-26, a potent, short-lived heat source. Inferences from compositional data are that Vesta was melted to high degree (≥50%) allowing homogenization of the silicate phase and separation of a metallic core. Convection of the silicate magma ocean allowed equilibrium crystallization, forming a harzburgitic mantle. After convective lockup occurred, melt collected between the mantle and the cool thermal boundary layer and underwent fractional crystallization forming an orthopyroxene-rich (diogenite) lower crust. The initial thermal boundary layer of chondritic material was replaced by a mafic upper crust through impact disruption and foundering. The mafic crust thickened over time as additional residual magma intrudes and penetrates the mafic crust forming plutons, dikes, sills and flows of cumulate and basaltic eucrite composition. This magmatic history may have taken only 2-3 Myr. This magma ocean scenario is at odds with a model of heat and magma transport that indicates that small degrees of melt would be rapidly expelled from source regions, precluding development of a magma ocean. Constraints from radiogenic Mg-26 distibutions suggest that the parent asteroid of HEDs was much smaller than Vesta. Thus, first-order questions regarding asteroid differentiation remain.

Mittlefehldt, David W.↗

AR-40 AR-39 Age of an Impact-Melt Lithology in DHOFAR 961

The South Pole-Aitken (SPA) basin is the stratigraphically oldest identifiable lunar basin and is therefore one of the most important targets for absolute age-dating to help understand whether ancient lunar bombardment history smoothly declined or was punctuated by a cataclysm. The SPA basin also has another convenient property, a geochemically distinct interior, unobscured by extensive mare basalt fill. A case has been made for the possible origin of the Dhofar 961 lunar meteorite in the South Pole-Aitken (SPA) basin, based on comparing its composition with Lunar Prospector gamma-ray data for the interior of the SPA basin. Dhofar 961 contains several different impact-melt (IM) lithologies. Jolliff et al. described two classes of mafic impact-melt lithologies, one dominated by olivine (Lithology A) and the other by plagioclase (An 95-96.5) (Lithology B). Broad-beam analyses of these lithologies yielded (is) approximately 14.0 wt% FeO, 11.7 wt% MgO, and 15.4 wt% Al2O3. Lithologies A and B differ by approximately 2.5% Al2O3, 1.5% FeO and 1.5% MgO, consistent with the occurrence of olivine phenocrysts in A and plagioclase clasts in B. Both lithologies are considerably more mafic than the Apollo mafic impact-melt breccias, corresponding to olivine gabbronorite. Joy et al. used U-Pb dating to investigate phosphate fragments in the Dhofar 961 matrix and impact-melt clasts. Matrix phosphates have 4.34 to 4 Ga ages, consistent with ancient KREEP-driven magmatic episodes and Pre-Nectarian ((is) greater than 3.92 Ga). Phosphates found within Dhofar 961 crystalline impact melt breccia clasts range from 4.26 to 3.89 Ga, potentially recording events throughout the basin forming epoch of lunar history. The youngest reset ages in the Dhofar 961 sample represent an upper limit for the time of formation of the meteorite. Joy et al suggested this age represents the final impact that mixed and consolidated several generations of precursor rocks into the Dhofar meteorite group, although they note that further age dating of all the stones is required to test this hypothesis. We received a split of Dhofar 961 from R. Zeigler consisting of a large clast of IM Lithology B, with some light-colored, friable matrix clinging to the external margins of the impact-melt clast. This lithology was not present in the samples investigated by Joy et al. and thus does not have corresponding U-Pb ages on it. We created multiple subsplits of both the IM and matrix lithologies, each weighing several tens of micrograms. We conducted Ar-40 Ar-39 dating of this candidate SPA material by high-resolution step heating and comparing it with the regolith that surrounds it.

Lithology↗

Excess Silica Substitution in Plagioclase Grains in the Pasamonte Eucrite

Pasamonte is a clast-rich polymict basaltic breccia with O- and Cr-isotopic compositions that are resolved from those of most eucrites. It is dominated by two mafic clast types: (i) very-fine- to fine-grained, variolitic, subophitic and ophitic basalts, usually containing zoned pyroxenes; and (ii) fine- to medium grained hypidiomorphic-granular and allotriomorphic-granular microgabbros containing pyroxenes composed of augite lamellae in homogeneous pigeonite hosts. Minor clast types are fine-grained impact-melt, mafic-breccia and mafic-granular clasts; coarse matrix mineral fragments include pyroxene, plagioclase, silica, ferroan olivine and ilmenite. Our petrologic studies include determination of plagioclase compositions for the two major clast types and matrix grains, which we report here.

Mittlefehldt, D. W.↗

Ab initio thermodynamics of Ni and Co incorporation in Mg hydroxide, carbonate, and hydroxycarbonate minerals

Ni and Co are critical elements needed for modern technologies, and a better understanding of the ability of Mg-based minerals to incorporate these elements would benefit strategy development for Ni and Co recovery from mafic and ultramafic deposits. Here, in this work, we performed density functional theory (DFT) calculations of Ni and Co incorporation in six potential products of the carbonation of mafic and ultramafic silicates: brucite (Mg(OH) 2 ), magnesite (MgCO 3 ), nesquehonite (MgCO 3 ⸱3H 2 O), lansfordite (MgCO 3 ⸱5H 2 O), artinite (Mg 2 CO 3 (OH) 2 ⸱3H 2 O), and hydromagnesite (Mg 5 (CO 3 ) 4 (OH) 2 ⸱4H 2 O). The DFT results were used in an ab initio thermodynamics framework to explore the pH 2 O–pCO 2 conditions at which the Mg-based minerals were predicted to be thermodynamically stable and to quantify the Gibbs free energy of Ni and Co substitution at Mg sites. Among the six Mg-based minerals, brucite and magnesite were predicted to have the lowest Ni and Co substitution free energy. An analysis of the effect of temperature indicated that, at low temperature (<100 K), brucite more readily accommodated Ni and Co, while, at higher temperature (>335 K), magnesite more favorably incorporated Ni and Co. Between 100 K and 335 K, Ni was predicted to preferentially substitute for Mg in brucite and Co for Mg in magnesite, thus leading to a driving force for separating Ni and Co in conditions where brucite and magnesite both form. Insights gained in this work could therefore help select experimental conditions that either promote or inhibit incorporation of these critical elements into Mg-based mineral phases.

Critical elements↗

Visible/near-infrared spectral diversity from in situ observations of the Bagnold Dune Field sands in Gale Crater, Mars

As part of the Bagnold Dune campaign conducted by Mars Science Laboratory rover Curiosity, visible/near–infrared reflectance spectra of dune sands were acquired using Mast Camera (Mastcam) multispectral imaging (445–1013 nm) and Chemistry and Camera (ChemCam) passive point spectroscopy (400–840 nm). By comparing spectra from pristine and rover–disturbed ripple crests and troughs within the dune field, and through analysis of sieved grain size fractions, constraints on mineral segregation from grain sorting could be determined. In general, the dune areas exhibited low relative reflectance, a weak ~530 nm absorption band, an absorption band near 620 nm, and a spectral downturn after ~685 nm consistent with olivine–bearing sands. The finest grain size fractions occurred within ripple troughs and in the subsurface and typically exhibited the strongest ~530 nm bands, highest relative reflectances, and weakest red/near–infrared ratios, consistent with a combination of crystalline and amorphous ferric materials. Coarser–grained samples were the darkest and bluest and exhibited weaker ~530 nm bands, lower relative reflectances, and stronger downturns in the near–infrared, consistent with greater proportions of mafic minerals such as olivine and pyroxene. These grains were typically segregated along ripple crests and among the upper surfaces of grain flows in disturbed sands. Sieved dune sands exhibited progressive decreases in reflectance with increasing grain size, as observed in laboratory spectra of olivine size separates. In conclusion, the continuum of spectral features observed between the coarse– and fine–grained dune sands suggests that mafic grains, ferric materials, and air fall dust mix in variable proportions depending on aeolian activity and grain sorting.

79 ASTRONOMY AND ASTROPHYSICS↗

Optimizing a Knowledge-driven Prospectivity Model for Gold Deposits Within Peräpohja Belt, Northern Finland

This paper combines knowledge- and data-driven prospectivity mapping approaches by using the receiver operating characteristics (ROC) spatial statistical technique to optimize the process of rescaling input datasets and the process of data integration when using a fuzzy logic prospectivity mapping method. The methodology is tested in an active mineral exploration terrain within the Paleoproterozoic Peräpohja Belt (PB) in the Northern Fennoscandian Shield, Finland. The PB comprises a greenschist to amphibolite facies, complexly deformed supracrustal sequence of variable quartzites, mafic volcanic rocks and volcaniclastic rocks, carbonate rocks, black shales, mica schists and graywackes. These formations were deposited on Archean basement and 2.44 Ga layered intrusions, during the multiple rifting of the Archean basement (2.44–1.92 Ga). Younger intrusive units in the PB comprise 2.20–2.13 Ga gabbroic sills or dikes and 1.98 Ga A-type granites. Metamorphism and complex deformation of the PB took place during the Svecofennian orogeny (1.9–1.8 Ga) and were followed by intrusions of post-orogenic granitoids (1.81–1.77 Ga). The recent mineral exploration activities have indicated several gold-bearing mineral occurrences within the PB. The Rompas Au-U mineralization is hosted within deformed and metamorphosed calc-silicate veins enclosed within mafic volcanic rocks and contains uranium-bearing zones without gold and very high-grade (>10,000 g/t Au) gold pockets with uraninite and uraninite-pyrobitumen nodules. In the vicinity of the Rompas, a magnesium skarn hosted disseminated-stockwork gold mineralization was also recognized at the Palokas-Rajapalot prospect. The exploration criteria translated into a fuzzy logic prospectivity model included data derived from regional till geochemistry (Fe, Cu, Co, Ni, Au, Te, K), high-resolution airborne geophysics (magnetic field total intensity, electromagnetic, gamma radiation), ground gravity and regional bedrock map (structures). The current exploration licenses and exploration drilling sites for gold were used to validate the knowledge-driven mineral prospectivity model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Selective recovery of native copper from basalt tailings using alkaline glycinate solution

Mafic and ultramafic rocks present an intriguing pathway for CO 2 capture through strategic enhancements to the natural silicate weathering cycle. Simultaneously, these rock types are often hosts to appreciable amounts of metals critical to U.S. energy independence, particularly in the context of alkaline mine tailings from historical metal mining. The research and scientific prerogative, then, is to identify promising mafic and ultramafic feedstocks and conduct exploratory studies to effectively recover these critical minerals while preserving the potential for mineral carbonation. The Keweenaw Peninsula of Michigan hosts the largest native Cu reservoir within basalt in the world and experienced a rich history of Cu production spanning from pre-historic times to the mid-1900s. Today, much of the Cu mining legacy remains as mine waste tailings. In this study, we examined the Cu extractability from Keweenaw Basalt tailings using a sodium glycinate solution, in comparison with acid and sodium hydroxide leaching. Experimental results showed an 85 % Cu extraction rate using sodium glycinate as the extraction solution with negligible release of other cations from the basalt. The kinetic and extraction mechanisms of Cu selective recovery using glycinate solution were discussed using time-resolved experimental data and kinetic geochemical modeling. Theoretical estimation of carbon mineralization potential of all the existing basalt waste tailings (∼500 million tons) can reach 85.5 MMT CO 2 . A total of 0.786 MMT Cu can be recovered with sodium glycinate, with a value of 7.7 billion USD. In conclusion, this novel application of alkaline glycinate for selective Cu recovery from basalt mine tailings demonstrates the viability of selective metal recovery using a non-hazardous chemical while preserving CO 2 capture potential and presents a potential pathway toward reducing energy-related emissions and providing an unconventional domestic source of critical minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chronology of ungrouped achondrites Northwest Africa 11119 and 7325/8486: implications for early evolution of a heterogeneous crust on a differentiated planetesimal

The chronology of ungrouped achondrites provides key insights into the timeline of igneous activity in the early Solar System. Two ungrouped achondrites – Northwest Africa (NWA) 11119 (andesite-dacite) and NWA 8486 and its pair NWA 7325 (olivine gabbro) – are the focus of this study, where their chronologies are investigated using multiple high-resolution techniques. Here we report the lead-lead (207Pb-206Pb) and manganese-chromium (53Mn-53Cr) systematics of NWA 11119, as well as the 207Pb-206Pb systematics of NWA 8486 alongside aluminum-magnesium (26Al-26Mg) systematics for NWA 7325. The U-corrected 207Pb-206Pb ages of NWA 11119 and the combined ages of NWA 7325/8486 are 4566.4 ± 0.8 Ma and 4563.8 ± 1.9 Ma, respectively. Additionally, we report the 53Mn-53Cr age of NWA 11119 to be 4564.4 ± 2.5 Ma and the 26Al-26Mg age of NWA 7325/8486 to be 4563.1 ± 0.3 Ma. The formation of NWA 11119 requires partial melting of a (likely chondritic) source reservoir leading to eruption of Si rich, alkali depleted magmas, while NWA 7325/8486 likely formed from a chemically fractionated reservoir with superchondritic Al/Mg. The clear geochemical and isotopic similarities of these achondrites, combined with the chronology reported here, is suggestive of formation of these two ungrouped achondrites on a common parent body which likely formed in the inner Solar System and experienced early differentiation under reducing conditions. If these achondrites did share a parent body, it would suggest that primary asteroids in the early Solar System commonly produced mineralogically and geochemically heterogeneous crusts. While mineralogical and geochemical heterogeneity is known to exist in the (mostly mafic) crust of asteroid Vesta, our findings show that even more significant crustal heterogeneity (representing felsic and mafic compositions) may exist on other asteroids.

Cartwright, Julia [University of Leicester, UK]↗

Seismic tomography of compressional wave velocity and attenuation structure for Makushin Volcano, Alaska

Located in the central portion of the Alaska-Aleutian subduction zone, Makushin Volcano is among the most active volcanoes in the United States and has been classified as a very high threat by the National Volcano Early Warning System based on its eruptive history and proximity to the City of Unalaska and international air routes. In 2015, five standalone seismic stations and three mini seismic arrays of 15 stations each were deployed on Unalaska Island to supplement the Alaska Volcano Observatory permanent seismic network. This temporary array was operational for one year. Taking advantage of the increased azimuthal coverage and the array's increased earthquake detection capability, we developed body-wave Vp and Vp/Vs seismic images of the velocity structure beneath the volcano. Our results show a complex structure with the upper 4 km of the crust. The shallow high-Vp features possibly delineate remnant magma pathways or conduits. Low-Vp regions are found east of the caldera at approximately 4–8 km depth. This is in agreement with previous seismic tomographic work and InSAR-based geodetic models, which had identified this region as a possible long-term source of magma. A three-dimensional compressional wave attenuation model complemented the velocity models. In general, we observe regions of corresponding low P-wave velocity and high attenuation east of the summit caldera between 5 and 7 km depth, supporting the presence of a melt-rich zone. The absolute Vp values (5.5–6.0 km/s) in this region are consistent with the presence of a magma body with a mafic signature. Here, we suggest that a triggering mechanism that involves mafic injections into a more evolved shallow magma chamber is representative of the current magmatic system below the volcano, similarly to what petrological studies have inferred for past eruptions.

58 GEOSCIENCES↗

Lu-Hf isotopic evidence of a deep mantle plume source for the ~2.06 Ga Bushveld Large Igneous Province

The Bushveld Large Igneous Province (B-LIP) comprises a diverse array of >30 magma bodies that intruded the Kaapvaal Craton at ~2.06 Ga. Here, we use zircon and bulk-rock Lu-Hf isotope data to determine whether the B-LIP formed in response to the arrival of a plume(s) from the deep mantle or by melting of the depleted upper mantle during foundering of an eclogitized residue at the base of the lithosphere. New zircon Hf isotope compositions for four B-LIP bodies yield intrusion-specific average εHf (2.06Ga) values that range from -20.7 ± 2.8 to -2.7 ± 2.8, largely consistent with literature zircon data for other B-LIP intrusions. Bulk-rock solution εHf (2.06Ga) values for a variety of B-LIP intrusions range from -2.1 ± 0.2 to -10.6 ± 0.2. Because the most radiogenic Hf isotope compositions across the entire B-LIP are nearly primordial, having an εHf (2.06Ga) close to 0, it is likely that the heat source of the B-LIP was a plume(s) from deep mantle. The Hf isotope data further indicates that individual intrusions in the B-LIP were produced by melting of three distinct source reservoirs (in addition to melts derived from the plume itself): 1) Subduction and plume modified continental lithospheric mantle; 2) Older (~2.7 Ga) mafic-ultramafic plume-related material trapped in the Kaapvaal lithosphere; and 3) Mid- to upper Kaapvaal crust. The presence of ~2.7 Ga mafic-ultramafic material in the Kaapvaal lithosphere may have acted to strengthen the lithosphere so that it was able to resist being dispersed by the arrival of the B-LIP plume at ~2.06 Ga.

58 GEOSCIENCES↗

Mechanistic understanding of carbon mineralization in fracture systems using microfluidics

Carbon mineralization in mafic and ultramafic rocks presents an opportunity for permanent carbon storage in the Earth's subsurface. However, due to their lower permeability, pre-existing fracture networks are key for mineralization to occur. Therefore, to fully develop this technology, a mechanistic understanding of the mineralization behavior in fractures with the consideration of hydrodynamic components is required. We use high-pressure microfluidics to investigate key mechanisms influencing dissolution–precipitation in a fracture network. The experiments were conducted in micromodels made of natural rocks with a comb-shaped flow channel to mimic a fracture network. This enabled studying the effect of injection rate on coupled dissolution–precipitation in advection and diffusion-dominated flow paths. We used gypsum carbonation as an analog reaction to allow for realistic experimental time frames due to its rapid reaction kinetics. The experimental work is coupled with high-fidelity numerical simulations to enhance our understanding of the parameters affecting the mineralization reaction. Our results demonstrate the importance of flow rate on the rate and nature of the gypsum carbonation reaction revealing that higher flow rates enable deeper penetration of the mineral precipitation front into the dead-end channels. This is an important finding since for sustained mineralization in a fracture network, precipitation in dead-ends while still allowing for flowing fractures is critical. Detailed characterization of the precipitates showed that lower flow rates led to porous and loose precipitates in the form of aragonite while higher flow rates mimicked supersaturation behavior leading to the formation of calcite. The reactive transport simulations further demonstrated the significance of flow velocity in advection-dominated channels to influence the efficiency of carbon mineralization in diffusion-dominated channels, potentially clogging of dead-end channels. These findings highlight the need for coupling chemical, mechanical, and hydrodynamic processes to evaluate the nature and extent of carbon mineralization in fractured media critical for permanent storage in mafic and ultramafic formations. This research further highlights the need for more investigation in potential subsurface fracture generation techniques to aid carbon mineralization.

25 ENERGY STORAGE↗

Integrated Experimental and Modeling Studies of Mineral Carbonation as a Mechanism for Permanent Carbon Sequestration in Mafic/Ultramafic Rocks

A program of laboratory experiments, modeling and fieldwork was carried out at Yale University, University of Maryland, and University of Hawai‘i, under a DOE Award (DE-FE0004375) to study mineral carbonation as a practical method of geologic carbon sequestration. Mineral carbonation, also called carbon mineralization, is the conversion of (fluid) carbon dioxide into (solid) carbonate minerals in rocks, by way of naturally occurring chemical reactions. Mafic and ultramafic rocks, such as volcanic basalt, are natural candidates for carbonation, because the magnesium and iron silicate minerals in these rocks react with brines of dissolved carbon dioxide to form carbonate minerals. By trapping carbon dioxide (CO 2 ) underground as a constituent of solid rock, carbonation of natural basalt formations would be a secure method of sequestering CO 2 captured at power plants in efforts to mitigate climate change. Geochemical laboratory experiments at Yale, carried out in a batch reactor at 200°C and 150 bar (15 MPa), studied carbonation of the olivine mineral forsterite (Mg 2 SiO 4 ) reacting with CO 2 brines in the form of sodium bicarbonate (NaHCO 3 ) solutions. The main carbonation product in these reactions is the carbonate mineral magnesite (MgCO 3 ). A series of 32 runs varied the reaction time, the reactive surface area of olivine grains and powders, the concentration of the reacting fluid, and the starting ratio of fluid to olivine mass. These experiments were the first to study the rate of olivine carbonation under passive conditions approaching equilibrium. The results show that, in a simple batch reaction, olivine carbonation is fastest during the first 24 hours and then slows significantly and even reverses. A natural measure of the extent of carbonation is a quantity called the carbonation fraction, which compares the amount of carbon removed from solution, during a run, to the maximum amount that could have been removed if the olivine initially present had fully dissolved and the cations released had subsequently precipitated in carbonate minerals. The carbonation fractions observed in batch experiments with olivine grains and powders varied significantly, from less than 0.01 (1%) to more than 0.5 (50%). Over time, the carbonation fractions reached an upper limit after about 24 to 72 hours of reaction, then stayed constant or decreased. The peak Final Scientific/Technical Report DE-FE0004275 | Mineral Carbonation | 4 coincided with the appearance of secondary magnesium-bearing silicate minerals, whose formation competes for magnesium ions in solution and can even promote conditions that dissolve magnesite. The highest carbonation fractions resulted from experiments with low ratios of concentrated solution to olivine, during which amorphous silica spheres or meshes formed, instead of secondary silicate minerals. The highest carbonation fractions appear to result from competing effects. Precipitation of silica layers on olivine reduces the reactive surface area and, thus, the rate of olivine dissolution (which ultimately limits the carbonation rate), but these same silica layers can also inhibit the formation of secondary silicate minerals that consume magnesite formed in earlier stages of carbonation. Simulation of these experiments with simple geochemical models using the software program EQ3/6 reproduces the general trends observed—especially the results for the carbonation fraction in short-run experiments. Although further experimentation and better models are needed, this study nevertheless provides a framework for understanding the optimal conditions for sequestering carbon dioxide by reacting CO 2 -bearing fluids with rocks containing olivine minerals. A series of experiments at the Rock Physics Laboratory at the University of Maryland studied the carbonation process during deformation of thermally cracked olivine-rich rock samples (dunite) saturated with CO 2 brines of varying compositions. A goal of these geomechanical experiments was to see if flow and deformation processes, which accompany natural carbonation reactions in underground settings, work to enhance or inhibit the reactions. The experiments involved hydrostatic compaction, followed by deformation at a constant rate of strain. Sample permeability was monitored during the reactions. Comparison of the samples’ volume changes to their axial strains (shortening) during deformation indicates that samples reacted with CO 2 -saturated brines accommodate more axial compaction, before the onset of dilation (a swelling that precedes rock failure), than samples reacted with distilled water. Analyses of the reacted samples with scanning electron microscope (SEM) images indicate, first, that dissolution of olivine occurring in the initial stages of carbonation can provide pathways to fluid flow that sustain the reaction, and, second, that carbonate minerals precipitated along existing fractures in the rocks may serve as asperities, or roughness on a crack’s surface that restricts its closure. Final Scientific/Technical Report DE-FE0004275 | Mineral Carbonation | 5 In a related study undertaken by one of the principal investigators as a spin-off of the main project, a simple model of (magnesite) crystal growth in the pore space of basalts undergoing carbonation was developed. The model suggests that, under a carefully controlled program of CO 2 injection, carbonate mineral growth can harden the rock formation against earthquakes that might otherwise be induced by the injection of large fluid volumes (Yarushina and Bercovici, 2013). The overall conclusion of the research project is that mineral carbonation of underground mafic and ultramafic rock formations is a viable candidate for long-term sequestration of man-made carbon dioxide. No results obtained during the project indicate that the method is inherently intractable in its implementation; moreover, enormous volumes of basalt near Earth’s surface are candidate locations for large-scale injection programs. The geochemical experiments do indicate, however, that there will be significant engineering challenges in maintaining high rates of carbonation, by delaying the onset of chemical conditions that promote formation of secondary silicate minerals and, therefore, slow down, or even reverse, the carbonation process. It remains an open question as to whether carbonation processes can be sustained for many years in an engineered system operating on a large scale—a scale capable of accommodating millions of tons of CO 2 annually. The development of realistic theoretical models that can systematically describe the combined effects of reactive flow, precipitation and geomechanical deformation is a major barrier to further understanding of the practical viability of mineral carbonation as large-scale method of carbon sequestration.

58 GEOSCIENCES↗

Application LANDSAT imagery to geologic mapping in the ice-free valleys of Antarctica

The author has identified the following significant results. Studies in the Ice-Free Valleys are resulted in the compilation of a sizeable library of maps and publications. Rock reflectance measurements were taken during the Antarctic summer of 1973. Spectral reflectance of rocks (mostly mafic lava flows) in the McMurdo and Ice-Free Valleys areas were measured using a filter wheel photometer equipped to measure reflectances in the four Landsat bands. A series of samples were collected at regular intervals across a large differentiated, mafic sill near Lake Vida. Chemical analyses of the sample suggest that the tonal variations in this sill are controlled by changes in the iron content of the rock. False color images were prepared for a number of areas by the diazo method and with an optical multispectral biviewer. These images were useful in defining boundaries of sea ice, snow cover, and in the study of ablating glaciers, but were not very useful for rock discrimination.

Houston, R. S.↗

An Atlas of extraterrestrial particles collected with NASA U-2 aircraft, 1974 - 1976

Extraterrestrial particles collected during U-2 flights in the stratosphere were divided into four groups: chondritic, iron-sulfur--nickel, mafic silicates, and others. The chondritic aggregates are typically composed of Fe, Mg, Si, C, S, Ca, and Ni. Detectable levels of He-4 implanted from the solar wind occur in some. Olivine, spinel, and possibly pyrrhotite and a hydrated layered-lattice silicate were identified. The chondritic ablation particles contain no sulfur and appear to have been melted. Magnetite, olivine, and pyroxene were identified. The iron-sulfur-nickel type particles resemble meteoritic iron sulfide with a small amount of nickel, and contain magnetite and troilite. The mafic silicate type particles are iron magnesium silicate grains with clumps of chondritic aggregate particles adhering to their surfaces. Olivine and possibly pyrrhotite and pyroxene were identified. Most of the iron-nickel type particles are spherules and include taenite and wustite. The other type particles include nickel-iron mounds on spheroidal glassy-like grains having chondritic-like elemental abundances.

Brownlee, D. E.↗

Rare earth element abundances in rocks and minerals from the Fiskenaesset Complex, West Greenland

The paper reports activation-analysis determinations of rare-earth-element (REE) and other trace-element concentrations in selected rocks, plagioclase, and mafic separates from the Fiskenaesset Complex. The REE abundances are found to be very low and atypical in comparison with other terrestrial anorthosites. The plagioclases are shown to be characterized by a deficiency in heavy RE elements relative to light ones and a positive Eu anomaly, while the mafic separates are enriched in heavy rare earths and have no Eu anomaly, except in one sample. It is found that the bulk and trace-element abundances of the plagioclases are similar to those observed in some lunar anorthosites, but the degree of Eu anomaly is less in the plagioclases. The data are taken as confirmation of the idea that fractionation processes were involved in the origin of the Complex, and it is concluded that the Complex may have been produced from a magma generated by partial melting of a garnet-bearing source.

Henderson, P.↗