Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “large array”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

SISTec: Mathematical Calibration of Large Clearance Monitors - 18265

One major path for clearance of large amount of waste arising from the decommission of nuclear power plants is based on measurement with large clearance monitors (also known as free release measurement facilities). These devices utilize multi-detector plastic scintillator arrays (large clearance monitors can consist of up to 24 plastic scintillators) to offer both, extremely low minimum detectable activities (MDA) and short measurement times for waste packages weighing up to one metric ton. However, a major problem with these devices is to obtain nuclide specific efficiencies, especially for geometrically complex large waste packages. Normal procedure for estimating the efficiency is to device dummy waste packages and attach point sources with well-known activities to unfavourable positions in these packages. In accordance with this procedure, calibration factors can be derived in a radiological conservative way. Devising such test dummies is not always possible and the procedure is prone to generating large measurement uncertainties. In this publication, we propose a new method to derive calibration factors by means of the Los Alamos National Laboratory (LANL) simulation tool Monte Carlo N-Particle (MCNP) and a statistical-phenomenological model for the detector characterization. In a multi-step approach, first the detector response for a distribution of activity in a waste package is calculated and subsequently the detectors are mathematically characterized. Applying state of the art statistical and optimizing procedures, parameters for the detector response are derived in a self-consistent way. This also allows to rigorously propagate the uncertainties to the final calculated calibration factors according to the Guide to the Expression of Uncertainty in Measurement (GUM supplement 1). To validate the derived parameters for the detector characterization a minimally invasive experimental setup was devised and installed into the large clearance monitor. It consisted of an aluminum swivel arm which could position point sources to the relevant coordinates. The so collected measurement data not only allowed to investigate the precision of the calculated calibration factors, but also to probe the location of concentrated activity sources in the waste package. Furthermore, data on measurements with dummy waste packages were collected to test the reproducibility of well-known calibration factors. We present the software tool SIStec, which will provide an intuitive user-interface to generate and simulate waste package models and execute the above-mentioned method. Using SIStec, different scenarios for the distribution of activity in the waste package can be probed. This will also allow to optimize the clearance process on various levels. For example, measurement time for pre-measurements can be reduced in exchange for unfavourable calibration factors, which would still allow to meet the regulator limits for clearance. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Observed impacts of large wind farms on grassland carbon cycling

Deployment of wind energy is an essential renewable energy source that mitigates climate change and reduces air pollution. Over the last several decades, wind energy development has increased worldwide, expanding from ~20 to ~900 GW (gigawatt) during 2001-2022. Nonetheless, researchers have identified unintended consequences of wind energy on microclimate via turbine-altered surface-atmosphere exchanges of energy, momentum, mass, and trace gases. Based on multi-source observations and models, researchers also have drawn some conclusions that wind farms could warm the land surface, especially at night, at regional and continental scales. Consequently, altered microclimates at wind farms may affect vegetation productivity and carbon sequestration, two critically important ecosystem services related to carbon dynamics; however, such potential impacts and driving mechanisms remain poorly understood. Wind energy deployment is increasing globally to meet carbon neutrality goals, with upscaling of onshore wind power capacity projected to grow from 542 GW in 2018 to 1787 and 5044 GW by 2030 and 2050, respectively. Furthermore, increased demand for wind energy deployment may lead to much larger wind farms in open, expansive landscapes. In turn, a large array of geographically clustered wind turbines could collectively modify local microclimate and amplify turbine-atmosphere interactions, which, if large enough, may produce detectable impacts on ecosystem dynamics. Thus, identifying and quantifying the potential impacts of wind farms on carbon-related ecosystem services may facilitate sustainable wind energy development globally.

17 WIND ENERGY↗
DOE OSTI2024

Shared mooring system designs and cost estimates for wave energy arrays

For floating renewable energy devices to become more cost-efficient and commercially scalable, their mooring system designs must be low-cost and suited for large-scale installations. Large arrays of floating devices, such as wave energy converters (WECs), will likely be designed with an individual mooring system for each device in the array. However, new mooring technology advancements provide options to use shared mooring lines to connect adjacent devices to one another, reducing the total number of anchors in the array, thereby reducing material use and cost. Here, this paper explores the design, modeling, and cost analysis of shared mooring systems for various sizes of arrays consisting of heaving oscillating water column (OWC) WECs. Shared mooring systems for WEC arrays sized in 2 x N and N x N grid layouts are designed to meet the relevant design standards, checking their performance with a nonlinear time-domain dynamic simulation, and the costs of each are calculated and compared. Several assumptions are taken in the design process to produce efficient results, providing a preliminary optimization for guidance on design decisions rather than a full, detailed design analysis. Mooring system costs per WEC were found to decrease as the number of WECs in the array increase, up to certain array sizes. The 2 x 3 array had the lowest mooring system cost per WEC out of all arrays considered, with a 60% cost reduction relative to using individual mooring systems. The 3 x 3 and 4 x 4 arrays achieved a 50% cost per WEC reduction. In addition to these significant cost reductions, the shared mooring system designs can provide advantages through smaller mooring system footprints, lower installation times, and less seabed disturbance.

16 TIDAL AND WAVE POWER↗
DOE OSTI2018

CUPID-0: the first array of enriched scintillating bolometers for 0$\nu \beta \beta$ decay investigations

The CUPID-0 detector hosted at the Laboratori Nazionali del Gran Sasso, Italy, is the first large array of enriched scintillating cryogenic detectors for the investigation of 82 Se neutrinoless double-beta decay (0$\nu \beta \beta$). CUPID0 aims at measuring a background index in the region of interest (RoI) for 0$\nu \beta \beta$ at the level of 10 -3 counts/(keV kg years), the lowest value ever measured using cryogenic detectors. CUPID-0 operates an array of Zn 82 Se scintillating bolometers coupled with bolometric light detectors, with a state of the art technology for background suppression and thorough protocols and procedures for the detector preparation and construction. In this paper, the different phases of the detector design and construction will be presented, from the material selection (for the absorber production) to the new and innovative detector structure. The successful construction of the detector lead to promising preliminary detector performance which is discussed here.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

The first gamma-ray bursts in the universe

Gamma-ray bursts (GRBs) are the ultimate cosmic lighthouses, capable of illuminating the universe at its earliest epochs. Could such events probe the properties of the first stars at z ∼ 20, the end of the cosmic Dark Ages? Previous studies of Population III (Pop III) GRBs only considered explosions in the diffuse relic H II regions of their progenitors or bursts that are far more energetic than those observed to date. However, the processes that produce GRBs at the highest redshifts likely reset their local environments, creating much more complicated structures than those in which relativistic jets have been modeled so far. These structures can greatly affect the luminosity of the afterglow and hence the redshift at which it can be detected. We have now simulated Pop III GRB afterglows in H II regions, winds, and dense shells ejected by the star during the processes that produce the burst. We find that GRBs with E {sub iso,γ} = 10{sup 51}-10{sup 53} erg will be visible at z ≳ 20 to the next generation of near infrared and radio observatories. In many cases, the environment of the burst, and hence progenitor type, can be inferred from the afterglow light curve. Although some Pop III GRBs are visible to Swift and the Very Large Array now, the optimal strategy for their detection will be future missions like the proposed EXIST and JANUS missions with large survey areas and onboard X-ray and infrared telescopes that can track their near-infrared flux from the moment of the burst, thereby identifying their redshifts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Novel Low-Temperature Plasma Reactor for Industrial Applications

UV water disinfection for municipalities around the world is expected to grow over 15% annually, leading to a $2.8 billion dollar market by 2020. This growth is driving the need for higher power and more efficient UV sources. By far the greatest potential market for UV disinfection is drinking water. UV is now accepted as an available technology to deactivate Cryptosporidium and Giardia in surface water and other vulnerable sources. The output power of typical mercury-vapor UV lamps is limited to 30 W/m, requiring large arrays to treat relevant volumes of water. Higher power sources can be built with low-temperature plasmas, but require large, lossy, light-blocking magnetic cores. These cores require extensive cooling, and place a hard ceiling on power transfer to the plasma, optical efficiency, and ultimately on radiant light flux. In Phase I of this SBIR, DTI developed a novel, magnetically-coupled, toroidal pulsed plasma reactor that could run without ferrite cores, though the cores increased the coupling. DTI’s proposed geometry and exciter circuit topology enables the use of comparatively inexpensive electronic modules to operate in a pulsed-RF mode. The pulsed high-power discharge (1.5 MW peak, 500 kHz, < 5% duty cycle) creates high plasma temperatures for short durations, while maintaining a much lower steady-state temperature. This proposed reactor will be designed primarily to disinfect and denature wastewater or drinking water products, exploiting large-scale UV disinfection techniques. The UVC efficiency with the highest output power was 6.2%; for comparison, the efficiency of present high-power UV sources is 13%. It may be possible to increase the efficiency by operating pulses in a burst mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

The Molecular Gas Environment in the 20 km s{sup −1} Cloud in the Central Molecular Zone

We recently reported a population of protostellar candidates in the 20 km s{sup −1} cloud in the Central Molecular Zone of the Milky Way, traced by H{sub 2}O masers in gravitationally bound dense cores. In this paper, we report molecular line studies with high angular resolution (∼3″) of the environment of star formation in this cloud. Maps of various molecular line transitions as well as the continuum at 1.3 mm are obtained using the Submillimeter Array. Five NH{sub 3} inversion lines and the 1.3 cm continuum are observed with the Karl G. Jansky Very Large Array. The interferometric observations are complemented with single-dish data. We find that the CH{sub 3}OH, SO, and HNCO lines, which are usually shock tracers, are better correlated spatially with the compact dust emission from dense cores among the detected lines. These lines also show enhancement in intensities with respect to SiO intensities toward the compact dust emission, suggesting the presence of slow shocks or hot cores in these regions. We find gas temperatures of ≳100 K at 0.1 pc scales based on RADEX modeling of the H{sub 2}CO and NH{sub 3} lines. Although no strong correlations between temperatures and linewidths/H{sub 2}O maser luminosities are found, in high-angular-resolution maps we note several candidate shock-heated regions offset from any dense cores, as well as signatures of localized heating by protostars in several dense cores. Our findings suggest that at 0.1 pc scales in this cloud star formation and strong turbulence may together affect the chemistry and temperature of the molecular gas.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

EnergyIQ

EnergyIQ-the first "action-oriented" benchmarking tool for non-residential buildings-provides a standardized opportunity assessment based on benchmarking results. along with decision-support information to help refine action plans. EnergyIQ offers a wide array of benchmark metrics, with visuall as well as tabular display. These include energy, costs, greenhouse-gas emissions, and a large array of characteristics (e.g. building components or operational strategies). The tool supports cross-sectional benchmarking for comparing the user's building to it's peers at one point in time, as well as longitudinal benchmarking for tracking the performance of an individual building or enterprise portfolio over time. Based on user inputs, the tool generates a list of opportunities and recommended actions. Users can then explore the "Decision Support" module for helpful information on how to refine action plans, create design-intent documentation, and implement improvements. This includes information on best practices, links to other energy analysis tools and more. The variety of databases are available within EnergyIQ from which users can specify peer groups for comparison. Using the tool, this data can be visually browsed and used as a backdrop against which to view a variety of energy benchmarking metrics for the user's own building. User can save their project information and return at a later date to continue their exploration. The initial database is the CA Commercial End-Use Survey (CEUS), which provides details on energy use and characteristics for about 2800 buildings (and 62 building types). CEUS is likely the most thorough survey of its kind every conducted. The tool is built as a web service. The EnergyIQ web application is written in JSP with pervasive us of JavaScript and CSS2. EnergyIQ also supports a SOAP based web service to allow the flow of queries and data to occur with non-browser implementations. Data are stored in an Oracle 10g database. References: Mills, Mathew, Brook and Piette. 2008. "Action Oriented Benchmarking: Concepts and Tools." Energy Engineering, Vol.105, No. 4, pp 21-40. LBNL-358E; Mathew, Mills, Bourassa, Brook. 2008. "Action-Oriented Benchmarking: Using the CEUS Database to Benchmark Commercial Buildings in California." Energy Engineering, Vol 105, No. 5, pp 6-18. LBNL-502E.

MILLS, EVAN↗
DOE OSTI2022

Efficient Loads Surrogates for Waked Turbines in an Array

Accurately and efficiently predicting wind turbine structural loading is a crucial step in wind farm design. Without considering structural loading, wind farm optimization could negatively impact turbine fatigue and ultimate loads, especially for waked and partially waked turbines, which could result in higher maintenance costs and reduced turbine lifetime. However, predicting turbine loads throughout an array is a costly step, as these quantities require time-accurate results across long time histories, which is often intractable for large array optimization. Therefore, surrogate models that link array spacing to load outputs are often used, but the surrogates are then unique to the inflow conditions and array configurations in the training library. This work develops surrogate models for many wind turbine load outputs based solely on rotor plane velocity measurements, with no required input about array configuration or freestream inflow parameters. Surrogate models were constructed for many turbine quantities of interest (QoI), considering mean, standard deviation, ultimate, and fatigue loads. In general, most QoI statistics were accurately captured, as measured by predicted vs. actual correlation coefficient, confirming the suitability of the approach. Temporal mean values of the QoI required only temporal mean measurements of the rotor plane inflow velocity. However, accurate prediction of temporal standard deviation, ultimate, and fatigue values of QoI also required temporal standard deviations of the rotor plane velocity field. Poor surrogate performance was observed when too many correlated inputs were used, such as multiple velocity components. If the fewest inflow parameters are used to construct the surrogates, the average correlation coefficient value for all output QoI statistics is 0.89. Surrogates for standard deviations and damage equivalent loads (DELs) of turbine QoIs generally had lower accuracy and tower-base and shaft load channels posed the most difficult to capture accurately. The results suggest that these surrogates could be easily paired with analytic wake models, which are frequently used for pre-construction wind farm array optimization, to account for turbine loading in addition to power production. By including the optimal inflow conditions, the surrogate accuracy can improve to an average correlation coefficient value for all output QoI statistics of 0.92. This work has established the ability to build accurate surrogates for mean, standard deviation, ultimate load, and DEL turbine QoI values based on the rotor plane inflow velocity, and identified which inflow conditions lead to greater surrogate accuracy.

17 WIND ENERGY↗
DOE OSTI2021

Cold-Air Outbreaks in the Marine Boundary Layer Experiment (COMBLE) Field Campaign Report

The Cold-Air Outbreaks in the Marine Boundary Layer Experiment (COMBLE) was conducted successfully between 1 December 2019 and 31 May 2020 around the Norwegian Sea. COMBLE deployed the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) first Mobile Facility (AMF1) along the coast of northern Scandinavia, at an arctic latitude (70°N), and an array of additional instruments on Bear Island (75°N) in the Norwegian Sea. The instruments deployed at these two sites collected a large array of in situ and remote-sensing observations of atmospheric conditions, clouds, precipitation, and aerosol. The main objective of COMBLE is to quantify the properties of shallow convective clouds that develop as part of an air-mass transformation process when cold air blows over open water. The two COMBLE sites are located at ~1,200 km and ~500 km from the cold source, i.e., arctic ice edge, respectively.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Verification Suite for the Application of the Limiting Surface Density Method to Arrays of 9975 Packages

Criticality Safety Engineering at the Savannah River Site’s K-Area Complex seeks to reduce the computational burden of analysis for the K-Area Complex. By applying an adapted Limiting Surface Density hand calculation method, the need for lengthy detailed Monte Carlo models of the storage arrays may be reduced or eliminated. After promising initial results using models of idealized but heterogeneous packages, application of the method to large arrays of highly heterogeneous 9975 shipping packages is attempted. A SCALE KENO-VI model of the 9975 package, with true dimensions and radial and axial heterogeneity is developed. A suite of array arrangements representing both arrays with equal number of packages per side (package-cubic) and arrays with unequal number of packages per side (non-cubic) are evaluated in SCALE. The cubic arrangements are used to derive the 9975-specific material and geometry constants for the LSD method. These constants are then used to implement the LSD method and compare the LSD- predicted critical mass per package to SCALE-predicted critical mass per package. Sensitivities to certain material and geometric nuances are evaluated for inclusion in the verification suite. Finally, the ability of the method to predict neutron multiplication changes induced by fissile mass changes is examined as a segue for evaluating credible abnormal conditions with the LSD method.

42 ENGINEERING↗
DOE OSTI2017

Verification suite for the application of the limiting surface density method to arrays of 9975 packages

Criticality Safety Engineering at the Savannah River Site's K-Area Complex seeks to reduce the computational burden of analysis for the K-Area Complex. By applying an adapted Limiting Surface Density hand calculation method, the need for lengthy detailed Monte Carlo models of the storage arrays may be reduced or eliminated. After promising initial results using models of idealized but heterogeneous packages, application of the method to large arrays of highly heterogeneous 9975 shipping packages is attempted. A SCALE KENO-VI model of the 9975 package, with true dimensions and radial and axial heterogeneity is developed. A suite of array arrangements representing both arrays with equal number of packages per side (package-cubic) and arrays with unequal number of packages per side (non-cubic) are evaluated in SCALE. The cubic arrangements are used to derive the 9975-specific material and geometry constants for the LSD method. These constants are then used to implement the LSD method and compare the LSD- predicted critical mass per package to SCALE-predicted critical mass per package. Sensitivities to certain material and geometric nuances are evaluated for inclusion in the verification suite. Finally, the ability of the method to predict neutron multiplication changes induced by fissile mass changes is examined as a segue for evaluating credible abnormal conditions with the LSD method. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

A scalable superconducting nanowire memory array with row–column addressing

Scalable superconducting memory is required for the development of low-energy superconducting computers and fault-tolerant quantum computers. Conventional superconducting logic-based memory cells possess a large footprint that limits scaling; nanowire-based superconducting memory cells, although more compact, have high error rates, which hinders integration into large arrays. Here we report a 4 × 4 superconducting nanowire memory array that is designed for scalable row–column operations and has a functional density of 2.6 Mbit cm −2 . Each memory cell is based on a nanowire loop consisting of two temperature-dependent superconducting switches and a variable kinetic inductor. The arrays operate at 1.3 K, where we implement and characterize multiflux quanta state storage and destructive read-out. By optimizing the write- and read-pulse sequences, we minimize bit errors and maximize operating margins. We achieve a minimum bit error rate of 10 −5 . Here, we also use circuit-level simulations to understand the memory cell’s dynamics, performance limits and stability under varying pulse amplitudes.

Electrical and electronic engineering↗
DOE OSTI2016

ARE WE THERE YET? TIME TO DETECTION OF NANOHERTZ GRAVITATIONAL WAVES BASED ON PULSAR-TIMING ARRAY LIMITS

Decade-long timing observations of arrays of millisecond pulsars have placed highly constraining upper limits on the amplitude of the nanohertz gravitational-wave stochastic signal from the mergers of supermassive black hole binaries (∼10{sup −15} strain at f = 1 yr{sup −1}). These limits suggest that binary merger rates have been overestimated, or that environmental influences from nuclear gas or stars accelerate orbital decay, reducing the gravitational-wave signal at the lowest, most sensitive frequencies. This prompts the question whether nanohertz gravitational waves (GWs) are likely to be detected in the near future. In this Letter, we answer this question quantitatively using simple statistical estimates, deriving the range of true signal amplitudes that are compatible with current upper limits, and computing expected detection probabilities as a function of observation time. We conclude that small arrays consisting of the pulsars with the least timing noise, which yield the tightest upper limits, have discouraging prospects of making a detection in the next two decades. By contrast, we find large arrays are crucial to detection because the quadrupolar spatial correlations induced by GWs can be well sampled by many pulsar pairs. Indeed, timing programs that monitor a large and expanding set of pulsars have an ∼80% probability of detecting GWs within the next 10 years, under assumptions on merger rates and environmental influences ranging from optimistic to conservative. Even in the extreme case where 90% of binaries stall before merger and environmental coupling effects diminish low-frequency gravitational-wave power, detection is delayed by at most a few years.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Star formation rate and extinction in faint z ∼ 4 Lyman break galaxies

We present a statistical detection of 1.5 GHz radio continuum emission from a sample of faint z ∼ 4 Lyman break galaxies (LBGs). To constrain their extinction and intrinsic star formation rate (SFR), we combine the latest ultradeep Very Large Array 1.5 GHz radio image and the Hubble Space Telescope Advanced Camera for Surveys (ACS) optical images in the GOODS-N. We select a large sample of 1771 z ∼ 4 LBGs from the ACS catalog using B {sub F435W}-dropout color criteria. Our LBG samples have I {sub F775W} ∼ 25-28 (AB), ∼0-3 mag fainter than M{sub UV}{sup ⋆} at z ∼ 4. In our stacked radio images, we find the LBGs to be point-like under our 2'' angular resolution. We measure their mean 1.5 GHz flux by stacking the measurements on the individual objects. We achieve a statistical detection of S {sub 1.5} {sub GHz} = 0.210 ± 0.075 μJy at ∼3σ for the first time on such a faint LBG population at z ∼ 4. The measurement takes into account the effects of source size and blending of multiple objects. The detection is visually confirmed by stacking the radio images of the LBGs, and the uncertainty is quantified with Monte Carlo simulations on the radio image. The stacked radio flux corresponds to an obscured SFR of 16.0 ± 5.7 M {sub ☉} yr{sup –1}, and implies a rest-frame UV extinction correction factor of 3.8. This extinction correction is in excellent agreement with that derived from the observed UV continuum spectral slope, using the local calibration of Meurer et al. This result supports the use of the local calibration on high-redshift LBGs to derive the extinction correction and SFR, and also disfavors a steep reddening curve such as that of the Small Magellanic Cloud.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Nudging allows direct evaluation of coupled climate models with in situ observations: a case study from the MOSAiC expedition

Comparing the output of general circulation models to observations is essential for assessing and improving the quality of models. While numerical weather prediction models are routinely assessed against a large array of observations, comparing climate models and observations usually requires long time series to build robust statistics. Here, we show that by nudging the large-scale atmospheric circulation in coupled climate models, model output can be compared to local observations for individual days. We illustrate this for three climate models during a period in April 2020 when a warm air intrusion reached the MOSAiC (Multidisciplinary drifting Observatory for the Study of Arctic Climate) expedition in the central Arctic. Radiosondes, cloud remote sensing and surface flux observations from the MOSAiC expedition serve as reference observations. The climate models AWI-CM1/ECHAM and AWI-CM3/IFS miss the diurnal cycle of surface temperature in spring, likely because both models assume the snowpack on ice to have a uniform temperature. CAM6, a model that uses three layers to represent snow temperature, represents the diurnal cycle more realistically. During a cold and dry period with pervasive thin mixed-phase clouds, AWI-CM1/ECHAM only produces partial cloud cover and overestimates downwelling shortwave radiation at the surface. AWI-CM3/IFS produces a closed cloud cover but misses cloud liquid water. Our results show that nudging the large-scale circulation to the observed state allows a meaningful comparison of climate model output even to short-term observational campaigns. We suggest that nudging can simplify and accelerate the pathway from observations to climate model improvements and substantially extends the range of observations suitable for model evaluation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The organic redox transistor for neuromorphic computing

Inspired by the in-memory computing architectures of biological systems, neuromorphic computing using crossbar arrays of artificial synapses based on non-volatile memory (NVM) devices with variable conductances has emerged as a new paradigm to enable massively parallel and ultra-low power computing hardware for data centric applications. Although inference has been demonstrated successfully using crossbars based on a variety of NMV technologies, efficient learning and scaling to large arrays (>10 6 elements) remains a challenge due to the synaptic elements' non-ideal electrical characteristics which degrades ANN accuracy. A further challenge is that in the conductive state memristors draw large currents >μA resulting in significant voltage drops in the interconnect wires and increased probability of failure in scaled arrays. We suggest the organic polymer redox transistor (RT) is an alternate approach that could solve many of these challenges, enabling both inference and parallel outer product updates, as recently demonstrated by Fuller et al. An RT consists of redox-active channel and gate electrodes in contact with a liquid or solid electrolyte. lon insertion through the electrolyte controls the channel electronic conductivity, while electron transfer through an external circuit maintains overall charge neutrality. Unlike a rechargeable battery, in the RT the voltage built-up across the electrolyte is kept to a minimum (typically <100 mV) by using the same material for the gate and channel. Elimination of the voltage offset simplifies integration of the RT into programmable arrays by enabling the use of various selectors. RTs based on inorganic and organic materials have been recently demonstrated with conductance tuning occurring at potentials of just a few mV and hundreds to thousands of linearly and symmetrically programmable conductance states, enabling near ideal accuracy in neural network simulations. Introduced in the 1980's, redox transistors with metallic gate electrodes and organic channel materials, also known as organic electrochemical transistors (OECTs), have been explored for a variety of applications such as chem- and bio-sensing, neural interfaces, and low cost printed circuits. A typical channel material for OECTs is the conducting polymer poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS). PEDOT is a p-type semiconducting polymer with mobile positively charged polarons that hop chain-to-chain.

Talin, Albert Alec↗