SEARCH · Engineering Papers

Results for “kinetic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Intrinsic Kinetic Limitations in Substituted Lithium-Layered Transition-Metal Oxide Electrodes

Substituted Li-layered transition-metal oxide (LTMO) electrodes such as Li x Ni y Mn z Co 1-y-z O 2 (NMC) and Li x Ni y Co 1-y-z Al z O 2 (NCA) show reduced first cycle Coulombic efficiency (90-87% under standard cycling conditions) in comparison with the archetypal Li x CoO 2 (LCO; similar to 98% efficiency). Focusing on Li x Ni 0.8 Co 0.15 Al 0.0.5 O 2 as a model compound, we use operando synchrotron X-ray diffraction (XRD) and nuclear magnetic resonance (NMR) spectroscopy to demonstrate that the apparent first-cycle capacity loss is a kinetic effect linked to limited Li mobility at x > 0.88, with near full capacity recovered during a potentiostatic hold following the galvanostatic charge- discharge cycle. This kinetic capacity loss, unlike many capacity losses in LTMOs, is independent of the cutoff voltage during delithiation and it is a reversible process. The kinetic limitation manifests not only as the kinetic capacity loss during discharge but as a subtle bimodal compositional distribution early in charge and, also, a dramatic increase of the charge-discharge voltage hysteresis at x > 0.88. 7 Li NMR measurements indicate that the kinetic limitation reflects limited Li transport at x > 0.86. Electrochemical measurements on a wider range of LTMOs including Li x (Ni,Fe) y Co 1-y O 2 suggest that 5% substitution is sufficient to induce the kinetic limitation and that the effect is not limited to Ni substitution. In this paper, we outline how, in addition to a reduction in the number of Li vacancies and shrinkage of the Li-layer size, the intrinsic charge storage mechanism (two-phase vs solid-solution) and localization of charge give rise to additional kinetic barriers in NCA and nonmetallic LTMOs in general.

25 ENERGY STORAGE↗

DOE OSTI2020

Two-fluid and kinetic transport physics of Kelvin–Helmholtz instabilities in nonuniform low-beta plasmas

Hall-magnetohydrodynamic (Hall-MHD) theory, two-fluid simulations, and kinetic simulations are used in this work to investigate the cross-field transport properties of Kelvin–Helmholtz instabilities in nonuniform low-beta collisionless plasmas. Hall-MHD analysis shows how the linear properties of the instability are modified by density gradients and magnetization. High-order accurate two-fluid and kinetic simulations, with complete dynamics of finite-mass electrons and ions, are applied to a suite of parameter cases to systematically assess the effects of diamagnetic drift, magnetization, charge separation, and finite Larmor motion. Initialization of exact two-species kinetic equilibria facilitates the study of isolated physical effects and enables detailed cross-comparisons between two-fluid and kinetic simulations, including for cases where ion gyroradii are comparable to gradient scale lengths. For nonuniform plasmas with significant space charge, the results of two-fluid and kinetic simulations are found to disagree with Hall-MHD predictions. Kelvin–Helmholtz instability growth rates, per unit shear, are shown to be smaller when ion diamagnetic drift and $E \times B$ drift are parallel and larger when the two drifts are antiparallel. The effect is attributed to polarization drift in the shear layer, which leads to redistribution of charge, alters the electric field that drives plasma advection, and consequently modifies growth rates. Instability-induced mass transport for different parameters is characterized in terms of the flux across the shear layer and a simplified diffusion model. Distribution functions from kinetic simulations are shown to deviate substantially from Maxwellian reconstructions, indicating the importance of kinetic physics during the nonlinear phase of the instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Accurate parameterization of the kinetic energy functional for calculations using exact-exchange

In this report, electronic structure calculations based on Kohn-Sham density functional theory (KSDFT) that incorporate exact exchange or hybrid functionals are associated with large computational expense, a consequence of the inherent cubic scaling bottleneck and large associated prefactor, which limits the length and time scales that can be accessed. Though orbital-free density functional theory (OFDFT) calculations scale linearly with system size and are associated with significantly smaller prefactor, they are limited by the absence of accurate density-dependent kinetic energy functionals. Therefore, the development of accurate density-dependent kinetic energy functionals is important for OFDFT calculations of large realistic systems. To this end, we propose a method to train kinetic energy functional models at the exact-exchange level of theory by using a dictionary of physically relevant terms that have been proposed in the literature in conjunction with linear or nonlinear regression methods to obtain the fitting coefficients. For our dictionary, we use gradient expansion of the kinetic energy, nonlocal models proposed in the literature and their nonlinear combinations, such as a model that incorporates spatial correlations between higher order derivatives of electron density at two points. The predictive capabilities of these models are assessed by using a variety of model one-dimensional systems that exhibit diverse bonding characteristics, such as a chain of eight hydrogens, LiF, LiH, C 4 H 2 , C 4 N 2 and C 3 O 2 . We show that by using data from model one-dimensional KSDFT calculations performed using the exact-exchange functional for only a few neutral structures, it is possible to generate models with high accuracy for charged systems as well as electron and kinetic energy densities during self-consistent field iterations. In addition, we show that it possible to learn both the orbital dependent terms, i.e., the kinetic energy and the exact-exchange energy, and models that incorporate additional nonlinearities in spatial correlations, such as a quadratic model, are needed to capture subtle features of the kinetic energy density that are present in exact-exchange-based KSDFT calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

On analysis and stochastic modeling of the particle kinetic energy equation in particle-laden isotropic turbulent flows

In this study, we analyze three-dimensional particle-laden, isotropic turbulence to develop an understanding of inertial particle dynamics from a kinetic energy perspective. Data trends implying inhomogeneous sampling of the flow by particles are identified and used to support a proposed particle behavior: particles appear to accumulate in regions of low flow kinetic energy over time because they lose kinetic energy and slow down in such regions, ultimately causing them to spend more time there. To elucidate this behavior, we derive a particle kinetic energy equation from the particle momentum equation, which incorporates inertial effects through the Schiller–Naumann drag correlation. Upon extracting fundamental physics from this equation, hypotheses regarding the role of the Stokes number in the temporal change of particle kinetic energy and the previously proposed particle behavior are evaluated using simulation data considering three Stokes numbers. Finally, a Fokker–Planck equation is used to derive the steady-state probability density function of the particle kinetic energy. The model fits the simulation data well and provides a tool for further investigation into understanding preferential concentration, as well as a reduced order model for predicting particle kinetic energy in turbulent flows.

42 ENGINEERING↗

DOE OSTI2021

Methods—Analyzing Electrochemical Kinetic Parameters in Deep Eutectic Solvents Using an Extended Butler-Volmer Equation

Deep eutectic solvents (DESs) are promising electrolytes for electrochemical redox reactions, which can be used in redox flow batteries (RFBs). However, in some systems like the Fe 2+/3+ redox reaction in ethaline, traditional Tafel-based kinetic analysis generates unreasonable kinetic parameters (i.e., large anodic/cathodic charge transfer coefficients ( α a , α c ) along with low exchange current densities ( i 0 )). This hinders a comprehensive kinetic and kinetic mechanism study. Here, we perform a detailed investigation of the Tafel analysis using a series of synthetic rotating disk electrode (RDE) data. We find the Tafel analysis only works well when i 0 < 0.57 i lim (limiting current density) in our scenario and leads to abnormal kinetic values once i 0 exceeds this limiting value. Thus, we propose an extended Butler-Volmer (ex-BV) analysis based on modern non-linear fitting techniques to obtain the actual kinetic parameters for such systems. The results show that this method fits the RDE data closely and generates reliable α a , α c and i 0 values, demonstrating that it is a good replacement for traditional Tafel analysis for kinetic studies in high-viscosity electrolytes such as DES systems.

Electrochemistry↗

DOE OSTI2025

Capability in Theory, Modeling, and Validation for a Range of Innovative Fusion Concepts using High-Fidelity Moment-Kinetic Models

A computational modeling capability is created and available to the fusion community to understand and design lower-cost and innovative fusion concepts. The approach uses high- fidelity kinetic, moment-kinetic, and moment models and includes sophisticated plasma- boundary interactions. A majority of fusion-relevant simulations are performed with magnetohydrodynamic models and hybrid particle-in-cell codes, with limited-fidelity electron and kinetic physics. However, in fusion configurations like Z-pinches, field-reversed- configurations, plasma jet magneto-inertial fusion, spinning mirrors, and others, kinetic effects (both electron and ions) are critical to understand the physics and design scaling into the highly kinetic regime of a burning fusion plasma. Furthermore, as present fusion machines move towards a burning plasma regime, liquid-metal blankets are needed to handle first-wall heat- flux, reduce erosion, and eventually for energy conversion and fuel breeding. The work performed under this ARPA-E BETHE Capability Team advances the state-of-the-art in modeling and understanding plasma dynamics in fusion devices and its coupling with liquid-metal dynamics. These are critical areas of research for fusion energy to become realizable. To address these complex problems, we have leveraged and extended computational capabilities through the code, Gkeyll (developed jointly with Princeton Plasma Physics Laboratory and academic partners), for kinetic and moment modeling of fusion plasmas. The Concept Teams supported by this Capability Team include the Wisconsin High-field Axisymmetric Mirror (WHAM), Centrifugal Mirror Experiment (CFME), Plasma-Jet Magneto- Inertial Fusion (PJMIF), and solid and liquid wall plasma-material interaction studies relevant to a number of fusion concepts including Zap Energy’s Z-pinch. This software is open-source and available to the fusion community as a high-fidelity tool for the design of lower-cost fusion experiments. 3D gyrokinetic simulations of WHAM are now possible for long enough time scales to understand the evolution of interchange instabilities. 3D multi-fluid simulations of CMFE at higher Mach numbers are now possible for detailed design iterations with the goal of stability. The state-of-the-art in understanding shock formation and shock mitigation regimes in merging liners for PJMIF have been furthered by our kinetic simulations. Our novel models and frameworks studying plasma-material interaction by incorporating wall emission for various solid wall materials of relevance to pulsed and steady fusion concepts have advanced the state-of-the-art in our understanding of particle fluxes, heat fluxes, and other quantities at cathodes and anodes. The results from this work may explain discrepancies between experimental and theoretical predictions of achieved current densities in pulsed concepts such as Z-pinches. Another significant contribution of this Capability Team is the development and deployment of a novel experimental platform, LEX (Liquid Electrode eXperiment), at Virginia Tech to understand liquid metal free-surface response to electromagnetic pulses. The novel experiments along with model validation quantified the effect of different materials and sizes of liquid metal droplets on the radiative power balance of fusion plasmas for pulsed concepts. Furthermore, these experiments provided mitigation strategies for violent liquid metal response for high current pulses as would be expected in fusion regimes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Kinetic entropy-based measures of distribution function non-Maxwellianity: theory and simulations

We investigate kinetic entropy-based measures of the non-Maxwellianity of distribution functions in plasmas, i.e. entropy-based measures of the departure of a local distribution function from an associated Maxwellian distribution function with the same density, bulk flow and temperature as the local distribution. First, we consider a form previously employed by Kaufmann & Paterson (J. Geophys. Res., vol. 114, 2009, A00D04), assessing its properties and deriving equivalent forms. To provide a quantitative understanding of it, we derive analytical expressions for three common non-Maxwellian plasma distribution functions. We show that there are undesirable features of this non-Maxwellianity measure including that it can diverge in various physical limits and elucidate the reason for the divergence. We then introduce a new kinetic entropy-based non-Maxwellianity measure based on the velocity-space kinetic entropy density, which has a meaningful physical interpretation and does not diverge. We use collisionless particle-in-cell simulations of two-dimensional anti-parallel magnetic reconnection to assess the kinetic entropy-based non-Maxwellianity measures. We show that regions of non-zero non-Maxwellianity are linked to kinetic processes occurring during magnetic reconnection. We also show the simulated non-Maxwellianity agrees reasonably well with predictions for distributions resembling those calculated analytically. These results can be important for applications, as non-Maxwellianity can be used to identify regions of kinetic-scale physics or increased dissipation in plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Scanning Electrochemical Microscopy for Kinetic Investigations in Viscous Deep Eutectic Solvents: Identifying Practical Approach Curves and Deviations from Electron Transfer Models

Determining heterogeneous electrochemical electron transfer (ET) kinetics in electrolytes with a wide range of physical properties is of great interest for achieving high-performance redox flow batteries. Among such electrolytes, concentrated hydrogen-bonded electrolytes (CoHBEs), including deep eutectic solvents (DESs), have recently garnered significant attention. Unfortunately, traditional Tafel analysis using macroelectrodes often encounters issues with mass transfer limitations in CoHBEs with high viscosities, thereby restricting kinetic analysis to a narrow potential window. Here, in this work, we introduce a methodology for evaluating ET kinetics in viscous DES using the scanning electrochemical microscopy (SECM). We first determined practical solutions to SECM tip positioning in ethaline DES, which yield pseudopositive feedback responses. Lattice Boltzmann method (LBM) simulations helped us rationalize the impact of the fluid and concentration fields, as well as tip geometry, tip approach velocity v, and the solvent viscosity ηs, on the shape of the approach curves. In addition to successfully recreating approach curves over a variety of conditions, we found that approaching a conductor ensured a practical point where the normalized tip response (Ni T = 2) converged at L = 0.7 within ∼10% error regardless of tip velocity. With positioning capabilities at hand, we investigated the kinetics of Fe 3+ /Fe 2+ redox couple in aqueous and the ethaline media. The experimental kinetic results were interpreted using the Butler–Volmer (BV) and Marcus–Hush–Chidsey (MHC) models. For ethaline, a nonideal kinetic behavior was observed, potentially attributed to solvent dynamics within DESs or to the interplay of chloride anions in the charge transfer process.

electrodes↗

DOE OSTI2021

Transport Modeling of Kinetically Limited Microscale Extraction Systems: Droplet and Supported Liquid Membrane Separations

Microfluidic droplet extraction devices can be used to efficiently measure solute phase transfer kinetics in liquid–liquid extraction systems. In this work, a droplet extraction apparatus was constructed using off-the-shelf and custom 3D printed parts for less than 110 USD. The interfacial kinetics of the transfer of Pu(IV) between an aqueous nitric acid phase and a 5 v/v% tridodecylamine (TDA) in toluene phase were characterized by determining the extent of Pu(IV) transfer between phases at different flow rates. Forward interfacial rate constants calculated from this data using an analytical model are 5.6 × 10 –3 mm s –1 under extraction (aqueous-to-organic solute transfer) conditions and 3.3 × 10 –3 mm s –1 under stripping (organic-to-aqueous solute transfer) conditions. The analytical model is valid when the rate of solute transfer across the interface between the two liquid phases has pseudo-first-order reversible reaction kinetics and is slow relative to the rate of solute transport to the interface. The change in the outlet concentration with residence time determined using the analytical model was compared with the results of a numerical model accounting for advection/diffusion to the interface in addition to kinetically limited interfacial solute transfer. These calculations revealed that for systems with forward interfacial rate constants greater than approximately 10 –2 mm s –1 , the analytical model must be supplemented with a numerical transport model accounting for an additional advection/diffusion mass transfer resistance. This threshold corresponds to a Damköhler number of one. The measured interfacial kinetic rate constants for Pu(IV)/TDA were used in a supported liquid membrane (SLM) numerical model, which showed that the Pu(IV) phase transfer kinetics are fast enough for use in a practical separation.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2021

Thermodynamics and kinetics of precipitation and austenite reversion during aging of Ti-free grade 300 maraging steel manufactured by laser powder bed fusion (LPBF)

Austenite reversion and intermetallic precipitation are two key phase transformations in maraging steels which determine the strength and ductility. Usually, an optimum aging temperature/time is determined using trial and error approach with inputs from thermodynamic databases and a-posteriori microscopy/hardness evaluations. In this study, a thermo-kinetic model is developed to predict the precipitation and austenite reversion kinetics during various post-fabrication heat treatments in a Ti-free variant of grade 300 maraging steel manufactured using laser powder bed fusion. The thermo-kinetic model was based on the principles of Scheil solidification and the classical nucleation theory. The predictions from the thermo-kinetic model were verified using suitable microscopy techniques, and the results from the thermo-kinetic model agree well with the experimental measurements. Overall, results highlight the fact that an Integrated Computational Materials Engineering approach can be used to predict the precipitation and austenite reversion kinetics, and be used as an input for an efficient design of heat treatments for achieving optimum mechanical properties.

36 MATERIALS SCIENCE↗

DOE OSTI2025

The Role of Kinetic Instabilities and Waves in Collisionless Magnetic Reconnection

Magnetic reconnection converts magnetic field energy into particle energy by breaking and reconnecting magnetic field lines. Magnetic reconnection is a kinetic process that generates a wide variety of kinetic waves via wave-particle interactions. Kinetic waves have been proposed to play an important role in magnetic reconnection in collisionless plasmas by, for example, contributing to anomalous resistivity and diffusion, particle heating, and transfer of energy between different particle populations. These waves range from below the ion cyclotron frequency to above the electron plasma frequency and from ion kinetic scales down to electron Debye length scales. This review aims to describe the progress made in understanding the relationship between magnetic reconnection and kinetic waves. We focus on the waves in different parts of the reconnection region, namely, the diffusion region, separatrices, outflow regions, and jet fronts. Particular emphasis is placed on the recent observations from the Magnetospheric Multiscale (MMS) spacecraft and numerical simulations, which have substantially increased the understanding of the interplay between kinetic waves and reconnection. Some of the ongoing questions related to waves and reconnection are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Kinetics-Informed Neural Networks

Chemical kinetics and reaction engineering consists of the phenomenological framework for the disentanglement of reaction mechanisms, optimization of reaction performance and the rational design of chemical processes. Here, we utilize feed-forward artificial neural networks as basis functions to solve ordinary differential equations (ODEs) constrained by differential algebraic equations (DAEs) that describe microkinetic models (MKMs). We present an algebraic framework for the mathematical description and classification of reaction networks, types of elementary reaction, and chemical species. Under this framework, we demonstrate that the simultaneous training of neural nets and kinetic model parameters in a regularized multi-objective optimization setting leads to the solution of the inverse problem through the estimation of kinetic parameters from synthetic experimental data. We analyze a set of scenarios to establish the extent to which kinetic parameters can be retrieved from transient kinetic data, and assess the robustness of the methodology with respect to statistical noise. Furthermore, this approach to inverse kinetic ODEs can assist in the elucidation of reaction mechanisms based on transient data.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Oxidation kinetics of biochar from woody and herbaceous biomass

The goal of this study was to determine oxidation kinetics for biochar produced from fast pyrolysis of various biomass feedstocks. In particular, the role of inherent ash content on the oxidation rate was evaluated. Thermogravimetric analysis (TGA) and fluidized bed combustion experiments were used to explore oxidation kinetics of six fast pyrolysis produced biochars with diverse ash content. Here, the reaction rates varied by a factor of three under chemical kinetic-limited conditions, demonstrating inorganic content impacts oxidation rate. Chemical kinetic rate coefficients were proposed as a function of compositional parameters to determine overall fit and impact. Potassium content was found to have a positive correlation, best describing the differences in the oxidation kinetic rate coefficients. Additionally, feedstocks were subjected to a 1 M HCl acid wash mitigating the catalytic activity of the metals. Acid washed biochars had lower oxidation kinetic rates compared to their unwashed counterparts, indicating the removal of catalytically active metals reduced oxidation rate. Gas composition (CO/CO 2 ) was measured during fluidized bed experiments for both acid-washed and unwashed biochars, which varied between the six biochars. Formation of CO 2 was greatly affected by catalytic metals, finding potassium content to correlate well with a higher percentage of CO 2 formation as compared to CO. Comparison of oxidation rates were made between the two experimental apparatuses to measure the effect of attrition on biochar oxidation.

09 BIOMASS FUELS↗

DOE OSTI2022

Determining the kinetic rate constants of Fe 3 O 4 -to-Fe and FeO-to-Fe reduction by H 2

Steel production using coal accounts for ~ 8% of global carbon emissions. “Green Steel” is a new grand concept proposed recently to make steel from iron ores using renewable derived “Green Hydrogen” to achieve zero carbon emission. The kinetics and rate-limiting steps of iron ore reduction into iron with H 2 as a reducing agent is critically important to the success of this new technology. While reduction of Fe 2 O 3 into Fe by H 2 follows multiple steps, the past research on this topic mainly deals with the overall averaged kinetics, giving little information on the elemental and rate-limiting steps. In this work, we report a kinetic study specifically design to attain kinetic rate constants of one-step reduction of Fe 3 O 4 -to-Fe and FeO-to-Fe. Guided by thermodynamics, we show first how to create in situ the desirable starting oxide phases, i.e., Fe 3 O 4 and FeO, with precisely controlled the ratio of partial pressures of H 2 O and H 2 . We then show time-dependent raw H 2 O content data collected by a mass spectrometer and the processed reduction data to extract kinetic rate constants. We found that the kinetics of the two one-step reduction reactions follows nicely the Johnson-Mehl-Avrami (JMA) phase transformation model. The one-step reduction mechanisms and activation energy are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

High and Ultra-High Temperature Reaction Kinetics by Single Nanoparticle Mass Spectrometry

Methodology is presented for non-destructive, optically-detected single nanoparticle (NP) mass spectrometry, with the goal of extracting surface reaction kinetics for single NPs at high temperatures. Methods for determining the NP charge, mass, and temperature as a function of time are discussed, and the data are used to extract both the absolute kinetics for mass change, as well as the efficiencies of the surface processes that cause them. Factors that contribute to the uncertainties in absolute and relative mass determination, and in the resulting kinetic parameters, are discussed. The method allows the NP-to-NP variations in initial reactivity to be measured directly, along with the time evolution of reactivity resulting from NP structural/compositional changes that occur under reaction conditions. The strengths and limitations of single nanoparticle mass spectrometry as a high temperature surface kinetics tool are discussed in the context of sublimation and O2 oxidation kinetics experiments for single hafnium (Hf) NPs at temperatures ranging above 2400 K. The Hf oxidation kinetics are compared to analogous oxidation experiments for silicon, graphite, and carbon black NPs. In all four cases, the oxidation chemistry was dominated by processes that result in net mass loss, and the distinct mechanisms responsible are discussed. All four NPs also eventually passivated, i.e., the efficiencies for oxidative etching decreased by at least two orders of magnitude, relative to the initial efficiencies. Furthermore, the passivation mechanisms, which are quite different for carbon, compared to silicon or hafnium, are discussed. Carbon NP passivation is attributed to structural isomerization leading to fully coordinated, fullerene-like NP surfaces, while for silicon and hafnium, passivation results from delayed formation of an oxide layer, triggered by accumulation of oxygen in the NP sub-surface region.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Effect of charge and anisotropic diffusivity on ion exchange kinetics in nuclear waste form materials

Motifs of radionuclide absorption particles (absorbers or fillers) for the nuclear waste treatment usually have crystal structures with nano-sized tunnels for fast ion diffusion. On the other hand, the accumulation of ions generates an electric field which affects the ion diffusion. Therefore, the strong anisotropic kinetic properties and the electric field affect ion exchange kinetics, especially in an assembly of these particles which may block the fast diffusion tunnels for each other. In this work, we developed a mesoscale model to describe the effect of anisotropic kinetic properties and electric field on ion exchange kinetics. With the model we simulated the effect of anisotropic diffusivity, electrochemical potential, particle morphology, size and aggregation on ion exchange kinetics during batch experiments. Here, tt is found that 1) ion exchange results in charge accumulation inside the particle because different ions have different diffusivities and different diffusion driving forces. The electric neutrality is not preserved; 2) the electric field speeds up the slower diffusion ions (either uptake or release) and slows down the faster diffusion ions to reduce charge accumulation and maintains charge neutrality; 3) the ion exchange becomes very slow at the later stages because a) diffusion driving force (electrochemical gradient, Cs + concentration in the solution and Na + inside the particle) continuously decreases, as observed in batch experiments; and b) the diffusivity decreases due to the Cs + concentration dependence of ion diffusivity. This can explain the observed experimental phenomena that the radionuclide capacity usually cannot be reached; 4) for needle-like particle and their clusters, both surface area and diffusion distance along the direction with the fastest diffusivities have significant impact on the ion exchange kinetics.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2025

Isomerization kinetics of azobenzene crosslinked to a liquid crystal polymer network

Azobenzene is an important chromophore having numerous applications that are a direct implication of its ability to change shape upon irradiation with a suitable wavelength. Here, in this study, photoisomerization kinetics of a diacrylate azobenzene molecule (A3MA) cross-linked to a liquid crystal polymer network (LCN) is investigated. Isomerization experiments were conducted on planar LCN thin films with varying cross-linking densities for a fixed azobenzene concentration. The experiments were conducted at approximately 26 °C, which is significantly below each film’s glass transition temperature. The forward trans-cis and reverse cis-trans isomerization slows down in crosslinked azobenzene liquid crystal polymer networks (ALCNs) as compared to a solution and an uncrosslinked polymer mixture. The observed slowdown is due to the reduction in the free volume and increased steric hindrances with an increase in crosslinking. A single-term first-order kinetics rate equation is known to describe the isomerization kinetics in solutions or uncrosslinked mixtures while the same form fails to represent the reaction kinetics in moderate to highly cross-linked ALCNs. Our results for the first time indicate that a two-term first-order reaction rate is an accurate way to describe the forward trans-cis and reverse thermal cis-trans isomerization in crosslinked azobenzene liquid crystal polymer networks. In addition, the effect of film thickness and incident intensities on the reaction kinetics is investigated. Finally, the two-term isomerization kinetics is incorporated into a finite element photo-chemo-mechanical model to reveal the consequent slowdown in the actuation response of ALCN films. The current findings will be of particular interest to theoreticians and experimentalists alike, for it will help predict and understand accurately the responses of azobenzene-based coatings, and actuators and may have potential applications in underwater soft robotics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Experimental and kinetic modeling study of the low- temperature and high-pressure combustion chemistry of straight chain pentanol isomers: 1-, 2- and 3-Pentanol

Pentanols have received significant attention as a potential alternative fuel or fuel additive owing to their high energy densities and low vapor pressure. The development of robust chemical kinetic models for alternative fuels which can provide accurate and efficient predictions of combustion performance across a wide range of engine relevant conditions is important in developing cleaner, more efficient combustors. Although the high temperature oxidation kinetics of pentanol isomers has been researched considerably, their low temperature combustion chemistry needs further investigation. While previously proposed low temperature mechanisms for 1-pentanol based on analogy and rate rules need further refinement, the low temperature oxidation kinetics of 2-pentanol and 3-pentanol has not been studied previously by any means, experimentally or theoretically. A newly developed kinetic mechanism is presented in this work for the three straight chain pentanol isomers: 1-, 2- and 3-pentanol. Low temperature kinetics is based on a recent study by Lockwood et al., 2022 [20] involving theoretical calculations at the CCSD(T)/cc-pV∞Z level of theory for the oxidation pathways involving alcohol peroxy radicals. Rate of production analyses performed in this study highlight the importance of the newly added pressure-dependent reactions of the α-alcohol peroxy radical forming an RO 2 adduct. While the α-alcohol fuel radical reacts with O 2 to directly decompose via a chemically activated pathway at low pressures, the formation of the RO 2 adduct is favored at high pressures. Furthermore, the detailed model is comprehensively validated against new ignition experiments at low temperature and high pressure, together with the wide range of data available in the literature. Both qualitative and quantitative predictions of the experimental data using the proposed kinetic model are satisfactory for all three pentanol isomers studied here.

1-pentanol↗