Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “keywords”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Phosphorylated mesoporous carbon as effective catalyst for the selective fructose dehydration to HMF

Phosphorylated mesoporous carbons (PMCs) have been synthesized using an already reported one pot methodology. These materials have been applied as acidic catalysts in the dehydration of fructose to hydroxymethylfurfural (HMF). PMCs showed better selectivity to HMF compared to sulfonated carbon catalyst (SC) despite lower activity. The concentration of P-O groups correlates to the activity/selectivity of the catalysts; the higher the P-O concentration the higher the activity. However, the higher the P-O content the lower the selectivity to HMF. Indeed a lower concentration of the P-O groups (and even the acidic groups) minimized the degradation of HMF to levulinic acid and the formation of by-products, such as humines. Stability tests showed that these systems deactivate due to the formation of humines, water insoluble by-products derived from the dehydration of fructose, blocking the active site of the catalyst. Increasing the amount of P-O groups, higher amount of humines are formed; therefore carbons containing lower amount of phosphorylated groups, such as P/N-0.25, are less prone to deactivation. Keywords: Phosphorylated mesoporous carbons; fructose dehydration; HMF

Villa, Alberto↗

Biomass Fast Pyrolysis Using a Novel Microparticle Microreactor Approach: Effect of Particles Size, Biomass Type, and Temperature

Biomass fast pyrolysis is emerging as a front-running approach for the generation of renewable chemical and fuel resources. The pyrolysis temperature, solid and gas phase residence times, and biomass particle size and type have a substantial impact on char, oil and gas yields. A laboratory-scale fast pyrolysis technique was demonstrated using manufactured biomass microspheres. A unique single-particle (~10µg) micro-reactor technology coupled to a millisecond response flame ionization detector (fast-FID) was used to investigate the effects of relevant particle and process parameters and to capture the dynamic of real-time micro-scale single-particle pyrolysis for the first time. The manufactured biomass microspheres were produced by spray drying finely milled microcrystalline cellulose, switchgrass (Panicum virgatum) and tall fescue straw (Festuca arundinacea) flour. Keywords: biomass; fast pyrolysis; single particle; cellulose; switchgrass; tall fescue; flame ionization

Zolghadr, Ali↗

Nanostructured Metal Oxide Sorbents for the Collection and Recovery of Uranium from Seawater

The ability to collect uranium from seawater offers the potential for a long-term green fuel supply for nuclear energy. However, extraction of uranium, and other trace minerals, is challenging due to the high ionic strength and low mineral concentrations in seawater. Herein we evaluate the use of nanostructured metal oxide sorbents for the collection and recovery of uranium from seawater. Chemical affinity, chemical adsorption capacity and kinetics of preferred sorbent materials were evaluated. High surface area manganese and iron oxide nanomaterials showed excellent performance for uranium collection from seawater. Inexpensive nontoxic carbonate solutions were demonstrated to be an effective and environmental benign method of stripping the uranium from the metal oxide sorbents. Various formats for the utilization of the nanostructured metals oxide sorbent materials are discussed including traditional and nontraditional methods such as magnetic separation. Keywords: Uranium, nano, manganese, iron, sorbent, seawater, magnetic, separations, nuclear energy

Chouyyok, Wilaiwan↗

PDFDataExtractor: A Tool for Reading Scientific Text and Interpreting Metadata from the Typeset Literature in the Portable Document Format

The layout of portable document format (PDF) files is constant to any screen, and the metadata therein are latent, compared to mark-up languages such as HTML and XML. No semantic tags are usually provided, and a PDF file is not designed to be edited or its data interpreted by software. However, data held in PDF files need to be extracted in order to comply with opensource data requirements that are now government-regulated. In the chemical domain, related chemical and property data also need to be found, and their correlations need to be exploited to enable data science in areas such as data-driven materials discovery. Such relationships may be realized using text-mining software such as the “chemistry-aware” natural-language-processing tool, ChemDataExtractor; however, this tool has limited data-extraction capabilities from PDF files. This study presents the PDFDataExtractor tool, which can act as a plug-in to ChemDataExtractor. It outperforms other PDF-extraction tools for the chemical literature by coupling its functionalities to the chemical-named entityrecognition capabilities of ChemDataExtractor. The intrinsic PDF-reading abilities of ChemDataExtractor are much improved. The system features a template-based architecture. This enables semantic information to be extracted from the PDF files of scientific articles in order to reconstruct the logical structure of articles. While other existing PDF-extracting tools focus on quantity mining, this template-based system is more focused on quality mining on different layouts. PDFDataExtractor outputs information in JSON and plain text, including the metadata of a PDF file, such as paper title, authors, affiliation, email, abstract, keywords, journal, year, document object identifier (DOI), reference, and issue number. With a self-created evaluation article set, PDFDataExtractor achieved promising precision for all key assessed metadata areas of the document text.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiscale Informatics for Low-Temperature Propane Oxidation: Further Complexities in Studies of Complex Reactions

We have developed a multi-scale approach (Burke, M. P.; Klippenstein, S. J.; Harding, L. B. Proc. Combust. Inst. 2013, 34, 547–555.) to kinetic model formulation that directly incorporates elementary kinetic theories as a means to provide reliable, physics-based extrapolation to unexplored conditions. Here, we extend and generalize the multi-scale modeling strategy to treat systems of considerable complexity – involving multi-well reactions, potentially missing reactions, non-statistical product branching ratios, and non-Boltzmann (i.e. non-thermal) reactant distributions. The methodology is demonstrated here for a subsystem of low-temperature propane oxidation, as a representative system for low-temperature fuel oxidation. A multi-scale model is assembled and informed by a wide variety of targets that include ab initio calculations of molecular properties, rate constant measurements of isolated reactions, and complex systems measurements. Active model parameters are chosen to accommodate both “parametric” and “structural” uncertainties. Theoretical parameters (e.g. barrier heights) are included as active model parameters to account for parametric uncertainties in the theoretical treatment; experimental parameters (e.g. initial temperatures) are included to account for parametric uncertainties in the physical models of the experiments. RMG software is used to assess potential structural uncertainties due to missing reactions. Additionally, branching ratios among product channels are included as active model parameters to account for structural uncertainties related to difficulties in modeling sequences of multiple chemically activated steps. The approach is demonstrated here for interpreting time-resolved measurements of OH, HO2, n-propyl, i-propyl, propene, oxetane, and methyloxirane from photolysis-initiated low-temperature oxidation of propane at pressures from 4 to 60 Torr and temperatures from 300 to 700 K. In particular, the multi-scale informed model provides a consistent quantitative explanation of both ab initio calculations and time-resolved species measurements. The present results show that interpretations of OH measurements are significantly more complicated than previously thought – in addition to barrier heights for key transition states considered previously, OH profiles also depend on additional theoretical parameters for R + O2 reactions, secondary reactions, QOOH + O2 reactions, and treatment of non-Boltzmann reaction sequences. Extraction of physically rigorous information from those measurements may require more sophisticated treatment of all of those model aspects, as well as additional experimental data under more conditions, to discriminate among possible interpretations and ensure model reliability. Keywords: Optimization, Uncertainty quantification, Chemical mechanism, Low-Temperature Oxidation, Non-Boltzmann

Chemical mechanism↗

Tip-Enhanced Raman Scattering from Nanopatterned Graphene and Graphene Oxide

Tip-enhanced Raman spectroscopy (TERS) is particularly sensitive to analytes residing at plasmonic tip-sample nanojunctions, where the incident and scattered optical fields may be localized and optimally enhanced. However, the enhanced local electric fields in this so-called gap-mode TERS configuration are nominally orthogonal to the sample plane. As such, any given Raman active vibrational Eigenstate needs to have projections (of its polarizability derivative tensor elements) along the sample normal to be detectable via TERS. The faint TERS signals observed from two prototypical systems, namely, pristine graphene and graphene oxide are a classical example of the aforementioned rather restrictive TERS selection rules in this context. In this study, we demonstrate that nano-indentation, herein achieved using pulsed-force lithography with a sharp single-crystal diamond atomic force microscope probe, may be used to locally enhance TERS signals from graphene and graphene oxide flakes on gold. Nano-indentation locally perturbs the otherwise flat graphene structure and introduces out-of-plane protrusions that generate enhanced TERS. Although our approach is nominally invasive, we illustrate that the introduced nano-defects are highly localized, as evidenced by TERS nanoscale chemical mapping. As such, the described protocol may be used to extend and generalize the applicability of TERS for the rapid identification of two-dimensional material systems on the nanoscale. KEYWORDS

Bhattarai, Ashish↗

Electrocatalytic Hydrogenation of Oxygenated Compounds in Aqueous Phase

Electrocatalytic hydrogenation is a fascinating strategy to hydrogenate biogenic compounds at ambient conditions by replacing the thermal and H2 inputs by cathodic potential. This work compares the performance of this approach (in aqueous phase at room temperature) for a variety of model oxygenated compounds reacted over a series of metals. The target functionalities were carbonyl groups, aromatic rings, and ether bonds. All metals explored (Pt, Rh, Pd, Cu) are active for the reduction of carbonyl compounds to alcohols. For instance, conversion rates of benzaldehyde increased as a function of metal as: Pt < Rh < Pd (Cu was tested at different conditions). In contrast, only Rh and Pt were found active for hydrogenation of aromatic rings (Rh was more active than Pt). Comparing among the target functionalities, carbonyl groups are more reactive than aromatic rings and ether bonds in phenolic compounds and di-aryl ethers on all explore metals. This carbonyl reactivity, however, is enabled by the aromaticity of the molecule. Hence, the reactivity trend of the examined molecules is: butyraldehyde < furfural < acetophenone < benzaldehyde. For phenolic compounds, phenol is more reactive than cresol and methoxy phenol. Thus, the presence of substituting groups at the functionality being converted (either carbonyl or aromatic ring) decreases conversion rates. Ether bonds are cleaved under electrocatalytic conditions, which opens two main pathways for the conversion of aryl ethers: hydrogenation of the aromatic ring and hydrogenolysis of the ether bonds, whereas hydrolysis occurs as a minor pathway. Electrocatalytic hydrogenation competes with the H2 evolution reaction at the conditions of the tests, therefore Faradaic efficiency (fraction of current utilized in hydrogenation) and hydrogenation rates are correlated. That is, within the potential range explored, increasing hydrogenation rates lead to higher Faradaic efficiencies. The slope of this correlation, however, depends on the potential and on the functionality being hydrogenated. Keywords: Hydrogenation, electrocatalysis, metal catalysis, aqueous phase hydrogenation, biomass conversion. Acknowledgements The authors would like to thank Yang Song, Prof. Johannes Lercher, and the group of Prof. Hubert A. Gasteiger at the Technische Universität München for advice and support. The authors are grateful to Donald M. Camaioni, Nirala Singh, and Juan Herranz for fruitful discussions. The research described in this paper is part of the Chemical Transformation Initiative at Pacific Northwest National Laboratory (PNNL), conducted under the Laboratory Directed Research and Development Program at PNNL, a multi-program national laboratory operated by Battelle for the U.S. Department of Energy.

Hydrogenation, electrocatalysis, metal catalysis, ↗

Low-Resistant Ion-Exchange Membranes for Energy Efficient Membrane Capacitive Deionization

Membrane capacitive deionization (MCDI) has emerged as an effective and energy efficient desalination technology for treating brackish water streams used in numerous industrial processes. Most material research studies on MCDI focus on improving the porous electrodes or using flowing electrode architectures, and little emphasis is given to the rationale design of ion-exchange membranes (IEMs) for MCDI. In this work, the ionic conductivity, permselectivity, and thickness for three different IEM chemistries (polyaliphatic, poly(arylene ether), and perfluorinated) were correlated to MCDI performance attributes: energy expended per ion removed, salt removal efficiency, and Coulombic efficiency. A 5- to 10-fold reduction in area specific resistance, which accounts for thickness and ionic conductivity, with unconventional perfluorinated and poly(arylene ether) IEMs reduced the energy expended per ion removed in MCDI by a factor of 2 when compared to conventional electrodialysis IEMs. In situ electrochemical impedance spectroscopy substantiated that thinner membranes with higher ionic conductivity helped in the reduction of energy expended per ion removed (more than 50%). Lastly, the lower than 100% Coulombic efficiency is ascribed to carbon corrosion of the porous electrodes highlighting that further improvements in MCDI do not just necessitate more appropriate membranes but corrosion resilient electrodes. KEYWORDS: Desalination, Ion-exchange membranes, Membrane capacitive deionization

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Thick, Large-Area Nanoparticle Superlatices in Lithographically Defined Geometries

Superlattices of colloidal nanocrystals hold the promise of new nanomaterials with tunable properties. The positioning and size of these structures are often poorly controlled after self-assembly from the solution phase, making studies of their properties difficult. We report the fabrication of {approx}100 layer thick, three-dimensional superlattices on a substrate with controlled lateral placement. This novel fabrication technique generates long-range order over the micrometer scale and controlled placement by employing lithographic patterning and microfluidic flow. Keywords: Nanoparticles; superlattice; self assembly; microfluidics; ordered array.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Visualization of magnetic domains in sculpted three-dimensional cobalt nanospirals

In this work, we report on the direct visualization of magnetic structure in sculpted three- dimensional cobalt (Co) nanospirals with a wire diameter of 20 nm and outer spiral diameter of 115 nm and on the magnetic interactions between the nanospirals, using aberration-corrected Lorentz transmission electron microscopy. By analyzing the magnetic domains in three di- mensions at the nanoscale, we show that magnetic domain formation in the Co nanospirals is a result of the shape anisotropy dominating over the magnetocrystalline anisotropy of the system. We also show that the strong dipolar magnetic interactions between adjacent closely- packed nanospirals leads to their magnetization directions adopting alternating directions to minimize the total magnetostatic energy of the system. Deviations from such magnetization structure can only be explained by analyzing the complex three-dimensional structure of the nanospirals. These nanostructures possess an inherent chirality due to their growth conditions and are of significant importance as nanoscale building blocks in magneto-optical devices. Keywords: Nanomagnetic structure, Nanospiral, 3D nanomagnetism, 3D visualization, Lorentz transmission electron microscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spatial Relationships of Sector-Specific Fossil-fuel CO2 Emissions in the United States

Quantification of the spatial distribution of sector-specific fossil fuel CO2 emissions provides strategic information to public and private decision-makers on climate change mitigation options and can provide critical constraints to carbon budget studies being performed at the national to urban scales. This study analyzes the spatial distribution and spatial drivers of total and sectoral fossil fuel CO2 emissions at the state and county levels in the United States. The spatial patterns of absolute versus per capita fossil fuel CO2 emissions differ substantially and these differences are sector-specific. Area-based sources such as those in the residential and commercial sectors are driven by a combination of population and surface temperature with per capita emissions largest in the northern latitudes and continental interior. Emission sources associated with large individual manufacturing or electricity producing facilities are heterogeneously distributed in both absolute and per capita metrics. The relationship between surface temperature and sectoral emissions suggests that the increased electricity consumption due to space cooling requirements under a warmer climate may outweigh the savings generated by lessened space heating. Spatial cluster analysis of fossil fuel CO2 emissions confirms that counties with high (low) CO2 emissions tend to be clustered close to other counties with high (low) CO2 emissions and some of the spatial clustering extends to multi-state spatial domains. This is particularly true for the residential and transportation sectors, suggesting that emissions mitigation policy might best be approached from the regional or multi-state perspective. Our findings underscore the potential for geographically focused, sector-specific emissions mitigation strategies and the importance of accurate spatial distribution of emitting sources when combined with atmospheric monitoring via aircraft, satellite and in situ measurements. Keywords: Fossil-fuel; Carbon dioxide emissions; Sectoral; Spatial cluster; Emissions mitigation policy

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Semi-supervised machine-learning classification of materials synthesis procedures

Digitizing large collections of scientific literature can enable new informatics approaches for scientific analysis and meta-analysis. However, most content in the scientific literature is locked-up in written natural language, which is difficult to parse into databases using explicitly hard-coded classification rules. In this work, we demonstrate a semi-supervised machine-learning method to classify inorganic materials synthesis procedures from written natural language. Without any human input, latent Dirichlet allocation can cluster keywords into topics corresponding to specific experimental materials synthesis steps, such as “grinding” and “heating”, “dissolving” and “centrifuging”, etc. Guided by a modest amount of annotation, a random forest classifier can then associate these steps with different categories of materials synthesis, such as solid-state or hydrothermal synthesis. Finally, we show that a Markov chain representation of the order of experimental steps accurately reconstructs a flowchart of possible synthesis procedures. Our machine-learning approach enables a scalable approach to unlock the large amount of inorganic materials synthesis information from the literature and to process it into a standardized, machine-readable database.

36 MATERIALS SCIENCE↗

3D RECONNECTION AND FLOW DYNAMICS IN THE SSX EXPERIMENT

Several new experimental results are reported from plasma merging studies at the Swarthmore Spheromak Experiment (SSX) with relevance to collisionless three-dimensional magnetic reconnection in laboratory and space plasmas. First, recent high-resolution velocity measurements of impurity ions using ion Doppler spectroscopy (IDS) show bi-directional outflow jets at 40 km/s (nearly the Alfven speed). The SSX IDS instrument measures with 1 mus or better time resolution the width and Doppler shift of the C{sub III} impurity (H plasma) 229.7 nm line to determine the temperature and line-averaged flow velocity during spheromak merging events. High flow speeds are corroborated using an in situ Mach probe. Second, ion heating to nearly 10{sup 6} K is observed after reconnection events in a low-density kinetic regime. Transient electron heating is inferred from bursts on a 4-channel soft x-ray array as well as vacuum ultraviolet spectroscopy. Third, the out-of-plane magnetic field and the in-plane Lorentz force in a reconnection volume both show a quadrupolar structure at the ion inertial scale (c/omega{sub pi}). Time resolved vector magnetic field measurements on a 3D lattice B(r, t)) enables this measurement. Earlier work at SSX has shown that formation of three-dimensional structure at the ion inertial scale is temporally and spatially correlated with the observation of superthermal, super-Alfvenic ions accelerated along the X-line normal to the local 2D plane of reconnection. Each of these measurements will be related to and compared with similar observations in a solar or space context. Keywords: spheromak, flow, heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Combined use of computational chemistry and chemoinformatics methods for chemical discovery

Data analysis on numerical data by the computational chemistry calculations is carried out to obtain knowledge information of molecules. A molecular database is developed to systematically store chemical, electronic-structure, and knowledge-based information. The database is used to find molecules related to a keyword of “cancer”. Then the electronic-structure calculations are performed to quantitatively evaluate quantum chemical similarity of the molecules. Among the 377 compounds registered in the database, 24 molecules are found to be “cancer”-related. This set of molecules includes both carcinogens and anticancer drugs. The quantum chemical similarity analysis, which is carried out by using numerical results of the density-functional theory calculations, shows that, when some energy spectra are referred to, carcinogens are reasonably distinguished from the anticancer drugs. Therefore these spectral properties are considered of as important measures for classification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systems Engineering and Analysis in Support of a US Federal Staging Facility for UNF

The US Department of Energy Office of Nuclear Energy (DOE-NE) Office of Spent Fuel and High-Level Waste Disposition is examining a set of system options and conducting supporting analyses to inform the development of an integrated waste management system, which may include one or more federal staging facilities (FSFs) for used nuclear fuel (UNF ) sited using a collaborative siting process. This paper focuses on the ongoing activities in two systems engineering and analysis work areas: (1) data and tools development, validation, and maintenance and (2) systems engineering execution. Within the first work area, the STANDARDS 5.0 UNF data and analysis tool, formerly known as UNF-ST&DARDS, is being developed as a foundational resource to assist in the management of UNF data. It has the key capability to model UNF throughout the entire back end of the fuel cycle. STANDARDS also includes several compatible analysis tools for the time-dependent characterization of UNF and related systems by interfacing with the SCALE code system for nuclear analysis and COBRA-SFS for thermal analysis. Also, within the data and tools area is the Next Generation System Analysis Model (NGSAM), which is an agent-based simulation software tool expressly designed to be capable of modeling the waste management system, including the transportation of UNF to and from a FSF. NGSAM has been developed to enable informed decision-making by providing the capability to analyze various potential system options for the management of UNF and high-level radioactive waste. Finally, in the systems engineering execution area, the team has begun to apply a disciplined systems engineering approach at the system level along with supporting analysis to guide the development of the FSF project requirements (including associated transportation infrastructure). Systems engineering principles and practices and their adaptation/application to design and development activities will ensure that the waste management system is effectively implemented as work proceeds. Other activities include investigating the implications of changes in various assumptions and parameters related to waste management systems, such as UNF acceptance rates, receipt logic, facility capacities and capabilities, use of standardized canisters, and different assumed facility operation start dates. Keywords: federal staging facility (FSF), used nuclear fuel (UNF), integrated waste management (IWM) system, Next Generation System Analysis Model (NGSAM), STANDARDS, systems engineering

Joseph, Robert↗

Oxoanion Recognition by Benzene-based Tripodal Pyrrolic Receptors

Two new tripodal receptors based on pyrrole- and dipyrromethane-functionalised derivatives of a sterically geared precursor, 1,3,5-tris(aminomethyl)-2,4,6-triethylbenzene, are reported; these systems, compounds 1 and 2, display high affinity and selectivity for tetrahedral anionic guests, in particular dihydrogen phosphate, pyrophosphate and hydrogen sulphate, in acetonitrile as inferred from isothermal titration calorimetry measurements. Support for the anion-binding ability of these systems comes from theoretical calculations and a single-crystal X-ray diffraction structure of the 2:2 (host:guest) dihydrogen phosphate complex is obtained in the case of the pyrrole-based receptor system, 1. Keywords anion receptors, dihydrogen phosphate, hydrogen sulphate, X-ray structure, theoretical calculations.

08 HYDROGEN↗

Friction stir scribe welding technique for dissimilar joining of aluminium and galvanised steel

Friction stir scribe technology, a derivative of friction stir welding, was applied for the dissimilar lap welding of an aluminum alloy and galvanized mild steel sheets. During the process, the rotating tool with a cobalt steel scribe first penetrated the top material — aluminum — and then the scribe cut the bottom material — steel. The steel was displaced into the upper material to produce a characteristic hook feature. Lap welds were shear tested, and their fracture paths were studied. Welding parameters affected the welding features including hook height, which turned out to be highly related to fracture position. Therefore, in this paper, the relationships among welding parameters, hook height, joint strength and fracture position are presented. In addition, influence of zinc coating on joint strength was also studied. Keywords: friction stir scribe technology; dissimilar material welding; zinc coating; hook height; joint strength; fracture position

Aluminum↗

Bibliometric review and recent advances in total scattering pair distribution function analysis: 21 years in retrospect

Global research activities have been driven by the quest to develop and characterize novel materials for technological advancements. The total scattering pair distribution function (TSPDF) is a powerful and versatile characterization technique for examining the structural details of diverse complex materials including liquid, amorphous, disordered crystalline, and nanostructured materials. Thus, it is critical to keep track of research progress, identify research gaps, and future research directions of the application of the TSPDF technique in materials development and discovery. In this work, a bibliometric analysis of literature regarding the TSPDF technique between 2000 and 2021 was conducted using datasets retrieved from the Web of Science database. The research trends based on publication outputs, research subject distribution, co-authorships among institutions, countries/regions, co-citation of referenced sources, and keyword co-occurrence are evaluated and discussed herein. The impact of the TSPDF technique is projected to increase due to its importance in probing emerging functional materials, and the advances in specialized facilities and instrumentation among the scientific communities engaged with it. Finally, current and emerging research hotspots related to TSPDF technique such as catalysis, computer modeling and simulation, pharmaceutics, machine learning, hydrogen storage, battery materials, and layered structured materials are also identified and discussed.

36 MATERIALS SCIENCE↗