Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “isomerization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Persistence of the Z = 28 shell gap in A = 75 isobars: Identification of a possible ( 1 / 2 – ) μ s isomer in Co 75 and β decay to Ni 75

Here, the evolution of shell structure around doubly magic exotic nuclei is of great interest in nuclear physics and astrophysics. In the ‘southwest’ region of 78 Ni, the development of deformation might trigger a major shift in our understanding of explosive nucleosynthesis. To this end, new spectroscopic information on key close-lying nuclei is very valuable. We intend to measure the isomeric and β decay of 75 Co, with one-proton and two-neutron holes relative to 78Ni, to access new nuclear structure information in 75 Co and its β-decay daughters 75 Ni and 74 Ni. The nucleus 75 Co is produced in relativistic in-flight fission reactions of 238 U at the Radioactive Ion Beam Factory in the RIKEN Nishina Center. Its isomeric and β decay are studied exploiting the BigRIPS and EURICA setups. We obtain partial β-decay spectra for 75 Ni and 74 Ni, and report a new isomeric transition in 75 Co. The energy [E γ = 1914(2)keV] and half-life [t 1/2 = 13(6) μs] of the delayed γ ray lend support for the existence of a J π = (1/2 – ) isomeric state at 1914(2) keV. A comparison with PFSDG-U shell-model calculations provides a good account for the observed states in 75 Ni, but the first calculated 1/2 – level in 75 Co, a prolate K = 1/2 state, is predicted about 1 MeV below the observed (1/2 – ) level. The spherical-like structure of the lowest-lying excited states in 75 Ni is proved. In the case of 75 Co, the results suggest that the dominance of the spherical configurations over the deformed ones might be stronger than expected below 78 Ni. Further experimental efforts to discern the nature of the J π = (1/2 – ) isomer are necessary.

59 ≤ A ≤ 89↗

Chimera Spectrum Diagnostics for Peptides Using Two-Dimensional Partial Covariance Mass Spectrometry

The rate of successful identification of peptide sequences by tandem mass spectrometry (MS/MS) is adversely affected by the common occurrence of co-isolation and co-fragmentation of two or more isobaric or isomeric parent ions. This results in so-called `chimera spectra’, which feature peaks of the fragment ions from more than a single precursor ion. The totality of the fragment ion peaks in chimera spectra cannot be assigned to a single peptide sequence, which contradicts a fundamental assumption of the standard automated MS/MS spectra analysis tools, such as protein database search engines. This calls for a diagnostic method able to identify chimera spectra to single out the cases where this assumption is not valid. Here, we demonstrate that, within the recently developed two-dimensional partial covariance mass spectrometry (2D-PC-MS), it is possible to reliably identify chimera spectra directly from the two-dimensional fragment ion spectrum, irrespective of whether the co-isolated peptide ions are isobaric up to a finite mass accuracy or isomeric. We introduce ‘3-57 chimera tag’ technique for chimera spectrum diagnostics based on 2D-PC-MS and perform numerical simulations to examine its efficiency. We experimentally demonstrate the detection of a mixture of two isomeric parent ions, even under conditions when one isomeric peptide is at one five-hundredth of the molar concentration of the second isomer.

47 OTHER INSTRUMENTATION↗

Experimental study of the 34 m Cl beam production at intermediate energies

Here the isomeric content of a 34 Cl beam produced in the intermediate-energy projectile fragmentation of a 150 MeV/u 36 Ar beam on a 3 mm-thick Be target was studied. β-delayed γ-ray spectroscopy was used to measure the population of 34 Cl fragments in the ground vs. isomeric states at zero degrees relative to the incoming primary beam for four different momentum settings of the fragment separator near the predicted central velocity of these fragments, as well as, at two non-zero-degree settings for one momentum setting. Of the settings explored, which excluded rigidities within 0.5% of the value predicted to maximize total 34 Cl yield due to unreacted primary beam, the maximum rate for the production of Cl was found at a rigidity setting 0.75% below the predicted peak 34 Cl yield. The maximum population of the isomeric state relative to the ground state was observed at a rigidity 1.25% below the predicted maximum 34 Cl yield. Studies such as this are important in generating the understanding needed for producing isomer-enriched rare-isotope beams.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Naphthodithiophene‐Fused Porphyrins: Synthesis, Characterization, and Impact of Extended Conjugation on Aromaticity

The fusion of tetrapyrroles with aromatic heterocycles constitutes a useful tool for manipulating their opto-electronic properties. In this work, the synthesis of naphthodithiophene-fused porphyrins was achieved through a Heck reaction-based cascade of steps followed by the Scholl reaction. The naphthodithiophene-fused porphyrins display a unique set of optical and electronic properties. Fusion of the naphtho[2,1-b:3,4-b’]dithiophene to porphyrin (F2VTP) leads to a ~20% increase in the fluorescence lifetime, which is accompanied, unexpectedly, by a more than two-fold drop in the emission quantum yield (ϕ=0.018). In contrast, fusion of the isomeric naphtho[1,2-b:4,3-b’]dithiophene to porphyrin (F3VPT) results in a ~1.5-fold increase in the fluorescence quantum yield (ϕ=0.13) with a concomitant ~30 % increase in the fluorescence lifetime. This behavior suggests that fusion of the porphyrin with the naphthodithiopheno-system mainly affects the radiative rate constant in the Q-state deactivation pathway, where the effects of the isomeric naphtho[2,1-b:3,4-b’]dithiophene- versus naphtho[1,2-b:4,3-b’]dithiophene-fusion are essentially the opposite. Interestingly, nucleus-independent chemical shifts analysis revealed a considerable difference between the aromaticities of these two isomeric systems. Furthermore, our results demonstrate that subtle structural differences in the fused components of the porphyrin can be reflected in rather significant differences between the photophysical properties of the resulting systems.

Chemistry↗

Conversion of acenaphthalene to phenalene via methylation: A theoretical study

Ab initio calculations of the C 13 H 10 and C 13 H 9 potential energy surfaces related to the reaction of 1-acenaphthyl and methyl radicals and secondary isomerization of C 13 H 9 primary radical products have been performed at the chemically accurate G3(MP2,CC)//B3LYP/6-311G** level of theory to unravel the mechanism of conversion of acenaphthalene to phenalene or phenalenyl radical + H. The computed energetics and molecular parameters were utilized in Rice-Ramsperger-Kassel-Marcus Master Equation (RRKM-ME) calculations of reaction rate constants and relative product yields. The 1-acenaphthyl + CH 3 reaction is predicted to proceed by a fast radical-radical recombination mechanism and to predominantly produce collisionally stabilized 1-methylacenaphthalene B1 or a C 13 H 9 benzylic radical A1 + H with exothermicities of 106.8 and 25.2 kcal/mol, respectively. The A1 + H channel is preferable at higher temperatures, whereas the stabilization of 1-methylacenaphthalene is favored at higher pressures. The radical A1 can nearly irreversibly interconvert to phenalenyl radical AP via a 22.7 kcal/mol exothermic isomerization process involving formal insertion of the CH 2 group into a C-C bond of the five-member ring leading to the expansion of this ring to a six-member ring. The rate constants for the H addition reaction to phenalenyl radical to form phenalene and the reverse H loss from phenalene were also computed and the strength of the weakest C-H bond in the CH 2 group of phenalene is evaluated as 62.2 kcal/mol. The analysis of the reaction kinetics allowed us to deduce a mechanism for the conversion of 1-acenaphthyl radical to phenalene or phenalenyl radical + H via methylation involving the formation of A1 via a well-skipping channel or stabilization and dissociation of (or H abstraction from) B1 followed by isomerization of A1 to phenalenyl AP, which can add an H atom producing phenalene. As a result, rate constants for the significant elementary reactions are fitted to modified Arrhenius expressions and are proposed for kinetic modeling of the expansion of a five-member ring on a zigzag edge of PAH to a six-member ring by methylation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective dehydra-decyclization of cyclic ethers to conjugated dienes over zirconia

ZrO 2 provides high selectivity (>90%) to conjugated pentadienes through the dehydra-decyclization of C-5 cyclic ethers, even at high conversions. 1,3-Pentadiene was the major product in both reaction of 2-methyltetrahydrofuran and tetrahydropyran over ZrO 2 . The reaction of 3-methyltetrahydrofuran produced nearly stoichiometric amounts of isoprene. Other catalysts, including TiO 2 , γ-Al 2 O 3 , and H-ZSM-5, were generally much less selective and produced a mixture of diene isomers. A combination of TPD and steady-state measurements revealed that both piperylenes are exclusively produced through primary catalytic pathways from 2-methyltetrahydrofuran, avoiding any isomerization once formed. First-principle calculations on ZrO 2 imply the presence of an energetically favored, surface isomerization of ring-opened intermediates to conjugated alkenolates that selectively dehydrate to conjugated dienes, providing high selectivity to the desired products. Finally, the stabilization of the conjugated alkenolate is key for understanding the ability of ZrO 2 to selectively produce conjugated dienes from cyclic ethers, without the need for the thermo-limited diene isomerization.

1,3 -pentadiene↗

Laser-based conversion electron Mössbauer spectroscopy of 229 ThO 2

The exceptionally low-energy 229 Th nuclear isomeric state is expected to provide several new and powerful applications, including the construction of a robust and portable solid-state nuclear clock, perhaps contributing to a redefinition of the second, exploration of nuclear superradiance and tests of fundamental physics. Further, analogous to the capabilities of traditional Mössbauer spectroscopy, the sensitivity of the nucleus to its environment can be used to realize laser Mössbauer spectroscopy and, with it, new types of strain and temperature sensors and a new probe of the solid-state environment, all with excellent sensitivity. However, current models for examining the nuclear transition in a solid require the use of a high-bandgap, vacuum ultraviolet (VUV) transmissive host, severely limiting the applicability of these techniques. Here we report the first, to the authors’ knowledge, demonstration of laser-induced conversion electron Mössbauer spectroscopy (CEMS) of the 229 Th isomer in a thin ThO 2 sample whose bandgap (approximately 6 eV) is considerably smaller than the nuclear isomeric state energy (8.4 eV). Unlike fluorescence spectroscopy of the 229 Th isomeric transition, this technique is compatible with materials whose bandgap is less than the nuclear transition energy, opening a wider class of systems to study and the potential of a conversion-electron-based nuclear clock.

36 MATERIALS SCIENCE↗

Carotenoid cleavage enzymes evolved convergently to generate the visual chromophore

The retinal light response in animals originates from the photoisomerization of an opsin-coupled 11-cis-retinaldehyde chromophore. This visual chromophore is enzymatically produced through the action of carotenoid cleavage dioxygenases. Vertebrates require two carotenoid cleavage dioxygenases, β-carotene oxygenase 1 and retinal pigment epithelium 65 (RPE65), to form 11-cis-retinaldehyde from carotenoid substrates, whereas invertebrates such as insects use a single enzyme known as Neither Inactivation Nor Afterpotential B (NinaB). RPE65 and NinaB couple trans–cis isomerization with hydrolysis and oxygenation, respectively, but the mechanistic relationship of their isomerase activities remains unknown. Here we report the structure of NinaB, revealing details of its active site architecture and mode of membrane binding. Structure-guided mutagenesis studies identify a residue cluster deep within the NinaB substrate-binding cleft that controls its isomerization activity. Our data demonstrate that isomerization activity is mediated by distinct active site regions in NinaB and RPE65—an evolutionary convergence that deepens our understanding of visual system diversity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prompt-delayed γ-ray spectroscopy of neutron-rich 119.121 In isotopes

The Z = 50 shell closure, near N = 82, is unique in the sense that it is the only shell closure with the spin-orbit partner orbitals, π g 9 / 2 and π g 7 / 2 , enclosing the magic gap. The interaction of the proton hole/particle in the above-mentioned orbitals with neutrons in the νh 11/2 orbital is an important prerequisite to the understanding of the nuclear structure near N = 82 and the νπ interaction. To explore the structural similarity between the high-spin isomeric states in In ( Z = 49), Sn ( Z = 50), and Sb ( Z = 51) isotopes from a microscopic point of view. In addition, to understand the role of a proton hole or particle in the spin-orbit partner orbitals, π g 9 / 2 and π g 7 / 2 , respectively, with neutron holes in the ν h 11 / 2 orbital on these aforementioned isomers. The fusion and transfer induced fission reaction Be 9 ( U 238 , f ) with 6.2 MeV/u beam energy, using a unique setup consisting of AGATA, VAMOS++, and EXOGAM detectors, was used to populate through the fission process and study the neutron-rich In 119 , 121 isotopes. This setup enabled the prompt-delayed γ -ray spectroscopy of isotopes in the time range of 100 ns – 200 μ s . In the odd- A In 119 , 121 isotopes, indications of a short half-life 19/2 - isomeric state, in addition to the previously known 25/2 + isomeric state, were observed from the present data. Further, new prompt transitions above the 25/2 + isomer in In 121 were identified along with reevaluation of its half-life. The experimental data were compared with the theoretical results obtained in the framework of large-scale shell-model calculations in a restricted model space. Furthermore, the ( π g 9 / 2 ν h 11 / 2 ; I | H ^ | π g 9 / 2 ν h 11 / 2 ; I ) two-body matrix elements of residual interaction were modified to explain the excitation energies and the B ( E 2) transition probabilities in the neutron-rich In isotopes. The (i) decreasing trend of E (29/2 + ) - E (25/2 + ) in odd-In (with dominant configuration π g 9 / 2 - 1 ν h 11 / 2 - 2 and maximum aligned spin of 29/2 + ) and (ii) increasing trend of E (27/2 + ) - E (23/2 + ) in odd-Sb (with dominant configuration π g 7 / 2 + 1 ν h 11 / 2 - 2 and maximum aligned spin of 27/2 + ) with increasing neutron number could be understood as a consequence of hole-hole and particle-hole interactions, respectively.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental study of the 24 Na m ( d,p ) 25 Na reaction and implications for the influence of the 24 Al m isomer on rp -process nucleosynthesis

A radioactive beam of 24 Na with 90% of its content in its 1 + isomeric state (E ex = 0.472 MeV, t 1/2 = 20.18 ms) has been developed and used to perform a measurement of the 24 Na m ( d,p ) 25 Na reaction at the John D. Fox Accelerator Laboratory at Florida State University. This reaction selectively populated ℓ = 0 transfers, allowing the study of low-spin states in 25 Na. Mirror symmetry arguments were then used to investigate the effects of the isomeric state of 24 Al (E ex = 0.426 MeV, t 1/2 = 130 ms) on the astrophysical rate of the 24 Al m (p,γ) 25 Si reaction. Experimental parameters were extracted to provide, for the first time, an experimental reaction rate for the destruction of 24 Al via proton captures in its isomeric state relevant to rp-process nucleosynthesis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Precise mass measurement of the longest odd-odd chain of nuclei with 1+ ground states

Precise mass measurements of the ground and isomeric states of the odd-odd Rh108,110,112,114,116 were performed using the Canadian Penning Trap at Argonne National Laboratory, showing good agreement with recent JYFLTRAP measurements. A new possible isomeric state of Rh114 was also observed. These isotopes are part of the longest odd-odd chain of identical ground-state spin-parity assignment of 1+, spanning Rh104–118, despite being in a region of deformation. Realistic phenomenological mean-field calculations using the “universal” Wood-Saxon Hamiltonian were performed, which explained this phenomenon for the first time. In addition, multiquasiparticle blocking calculations were performed to study the configuration of low-lying states in the odd-odd Rh nuclei, elucidating anomalous isomeric yield ratio observed for Rh114.

Liu, B↗

Internally Catalyzed Hydrogen Atom Transfer (I-CHAT)—A New Class of Reactions in Combustion Chemistry

The current paradigm of low-T combustion and autoignition of hydrocarbons is based on the sequential two-step oxygenation of fuel radicals. The key chain-branching occurs when the second oxygenation adduct (OOQOOH) is isomerized releasing an OH radical and a key ketohydroperoxide (KHP) intermediate. The subsequent homolytic dissociation of relatively weak O–O bonds in KHP generates two more radicals in the oxidation chain leading to ignition. Based on the recently introduced intramolecular “catalytic hydrogen atom transfer” mechanism (J. Phys. Chem. 2024, 128, 2169), abbreviated here as I-CHAT, we have identified a novel unimolecular decomposition channel for KHPs to form their classical isomers—enol hydroperoxides (EHP). The uncertainty in the contribution of enols is typically due to the high computed barriers for conventional (“direct”) keto–enol tautomerization. Remarkably, the I-CHAT dramatically reduces such barriers. The novel mechanism can be regarded as an intramolecular version of the intermolecular relay transfer of H-atoms mediated by an external molecule following the general classification of such processes (Catal. Rev.-Sci. Eng. 2014, 56, 403). Here, we present a detailed mechanistic and kinetic analysis of the I-CHAT-facilitated pathways applied to n-hexane, n-heptane, and n-pentane models as prototype molecules for gasoline, diesel, and hybrid rocket fuels. We particularly examined the formation kinetics and subsequent dissociation of the γ-enol-hydroperoxide isomer of the most abundant pentane-derived isomer γ-C5-KHP observed experimentally. To gain molecular-level insight into the I-CHAT catalysis, we have also explored the role of the internal catalyst moieties using truncated models. All applied models demonstrated a significant reduction in the isomerization barriers, primarily due to the decreased ring strain in transition states. In addition, the longer-range and sequential H-migration processes were also identified and illustrated via a combined double keto–enol conversion of heptane-2,6-diketo-4-hydroperoxide as a potential chain-branching model. To assess the possible impact of the I-CHAT channels on global fuel combustion characteristics, we performed a detailed kinetic analysis of the isomerization and decomposition of γ-C5-KHP comparing I-CHAT with key alternative reactions—direct dissociation and Korcek channels. Calculated rate parameters were implemented into a modified version of the n-pentane kinetic model developed earlier using RMG automated model generation tools (ACS Omega, 2023, 8, 4908). Simulations of ignition delay times revealed the significant effect of the new pathways, suggesting an important role of the I-CHAT pathways in the low-T combustion of large alkanes.

Biochemistry & Molecular Biology↗

Product distribution, kinetics, and aerosol formation from the OH oxidation of dimethyl sulfide under different RO 2 regimes

Abstract. The atmospheric oxidation of dimethyl sulfide (DMS) represents a major natural source of atmospheric sulfate aerosols. However, there remain large uncertainties in our understanding of the underlying chemistry that governs the product distribution and sulfate yield from DMS oxidation. Here, chamber experiments were conducted to simulate gas-phase OH-initiated oxidation of DMS under a range of reaction conditions. Most importantly, the bimolecular lifetime (τbi) of the peroxy radical CH3SCH2OO was varied over several orders of magnitude, enabling the examination of the role of peroxy radical isomerization reactions on product formation. An array of analytical instruments was used to measure nearly all sulfur-containing species in the reaction mixture, and results were compared with a near-explicit chemical mechanism. When relative humidity was low, “sulfur closure” was achieved under both high-NO (τbi<0.1 s) and low-NO (τbi>10 s) conditions, though product distributions were substantially different in the two cases. Under high-NO conditions, approximately half the product sulfur was in the particle phase, as methane sulfonic acid (MSA) and sulfate, with most of the remainder as SO2 (which in the atmosphere would eventually oxidize to sulfate or be lost to deposition). Under low-NO conditions, hydroperoxymethyl thioformate (HPMTF, HOOCH2SCHO), formed from CH3SCH2OO isomerization, dominates the sulfur budget over the course of the experiment, suppressing or delaying the formation of SO2 and particulate matter. The isomerization rate constant of CH3SCH2OO at 295 K is found to be 0.13±0.03 s−1, in broad agreement with other recent laboratory measurements. The rate constants for the OH oxidation of key first-generation oxidation products (HPMTF and methyl thioformate, MTF) were also determined (kOH+HPMTF=2.1×10-11 cm3 molec.−1 s−1, kOH+MTF=1.35×10-11 cm3 molec.−1 s−1). Product measurements agree reasonably well with mechanistic predictions in terms of total sulfur distribution and concentrations of most individual species, though the mechanism overpredicts sulfate and underpredicts MSA under high-NO conditions. Lastly, results from high-relative-humidity conditions suggest efficient heterogenous loss of at least some gas-phase products.

Ye, Qing (ORCID:0000000337978988)↗

Structures of HIV-1 Neutralizing Antibody 10E8 Delineate the Mechanistic Basis of Its Multi-Peak Behavior on Size-Exclusion Chromatography

Antibody 10E8 is capable of effectively neutralizing HIV through its recognition of the membrane-proximal external region (MPER), and a suitably optimized version of 10E8 might have utility in HIV therapy and prophylaxis. However, 10E8 displays a three-peak profile on size-exclusion chromatography (SEC), complicating its manufacture. Here we show cis-trans conformational isomerization of the Tyr-Pro-Pro (YPP) motif in the heavy chain 3rd complementarity-determining region (CDR H3) of antibody 10E8 to be the mechanistic basis of its multipeak behavior. We observed 10E8 to undergo slow conformational isomerization and delineate a mechanistic explanation for effective comodifiers that were able to resolve its SEC heterogeneity and to allow an evaluation of the critical quality attribute of aggregation. We determined crystal structures of single and double alanine mutants of a key di-proline motif and of a light chain variant, revealing alternative conformations of the CDR H3. We also replicated both multi-peak and delayed SEC behavior with MPER-antibodies 4E10 and VRC42, by introducing a Tyr-Pro (YP) motif into their CDR H3s. Our results show how a conformationally dynamic CDR H3 can provide the requisite structural plasticity needed for a highly hydrophobic paratope to recognize its membrane-proximal epitope.

60 APPLIED LIFE SCIENCES↗

Advantages of tandem versus simultaneous operation: The case of isomerization/hydrogenation of terpinolene epoxide to Terpinen-4-ol using a Ni/TiO 2 -SiO 2 bifunctional catalyst

The conversion of terpinolene epoxide to terpinen-4-ol is a desirable chemical transformation for the production of a valuable intermediate. Here this report describes a one-pot, two-step system for the reaction that uses a bifunctional Ni/TiO 2 -SiO 2 catalyst with isomerization and hydrogenation capabilities. The TiO 2 -SiO 2 serves to isomerize the starting epoxide. The Ni component works to hydrogenate the allylic double bond. The tandem system achieves a high 64% yield of terpinen-4-ol. X-ray diffraction analysis showed that TiO 2 -SiO 2 was a mixed binary oxide, and Fourier transform infrared spectroscopy of adsorbed pyridine suggested that acid sites were mainly Lewis acid sites. Electron microscopy showed that the Ni/TiO 2 -SiO 2 catalyst consisted of spherical particles comprising a titanosilicate phase with highly dispersed zero-valent Ni or anatase on the surface. Additionally, there was strong interaction between Ni and the TiO 2 -SiO 2 mixed oxides. Control kinetic experiments demonstrated that the tandem use of the catalysts was more effective than simultaneous operation.

42 ENGINEERING↗

Kinetic study of the azo – Hydrazone photoinduced mechanism in complexes with a -Re(CO) 3 L 0/+ core by flash photolysis

The photoprocesses of three rhenium(I) tricarbonyl complexes, fac-Re(NN)(CO) 3 L 0/+ , bearing an azo/hydrazone ligand, NN, and L = Cl, Br or CH 3 CN as axial ligand, were studied by time-resolved spectroscopic techniques. Flash irradiation of deaerated solutions of the complexes in acetonitrile photogenerated intermediates with intense optical absorptions in the UV–vis spectral region of the hydrazone ligand. The decay of the intermediates photogenerated with the Cl, Br and CH 3 CN ligands in the axial position proceeds by three different mechanisms. For the fac-Re(NN)(CO) 3 Cl, a three-step mechanism involving isomerization, tautomerization and rotation accounts for the spectroscopic transformations. In contrast to the flash photolysis result, the continuous photolysis of the complex in acetonitrile does not show spectroscopic changes associated with the generation of a stable product, i.e., the complex exhibits a photoreversible behavior. The first step observed in the flash irradiation of fac-Re(NN)(CO) 3 Cl, is missing in the decay of the photogenerated intermediates with fac-Re(NN)(CO) 3 Br and fac-[Re(NN)(CO) 3 CH 3 CN] + . A possible reason for this absence is that the process is too fast for the time-response of the flash photolysis set-up. Time-resolved spectra and associated reaction rate data for the Re(I) complexes are communicated and discussed. Finally, DFT calculations support a plausible E → Z mechanism with thermal back-isomerization mediated by tautomerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First observation of a shape isomer and a low-lying strongly-coupled prolate band in neutron-deficient semi-magic 187 Pb

Prompt and delayed gamma-ray spectroscopy of the neutron-deficient, semi-magic isotope 187Pb has been performed using the recoil-decay and isomer-decay tagging techniques at the Argonne Gas-Filled Analyzer. A new 5.15(15)-mu s isomeric state at only 308 keV above the spherical 3/2 - ground state is identified and classified as a shape isomer. A strongly-coupled band is observed on top of the isomer, which is nearly identical to the one built on the prolate 7/2 - [514] Nilsson state in the isotone 185 Hg. Based on this similarity and on the result of the potential-energy surface calculations, the new isomer in 187 Pb is proposed to originate from the same configuration. The retarded character of the 308-keV (7/2( - )→ 3/2$_{gs}^{-}$ transition with a deduced B(E2) = 5.6(2) x 10 -4 W.u. can be well explained by the significant difference between the prolate parent and spherical daughter configurations, leading to the shape isomerism. The excitation energy of the isomer is surprisingly low, being roughly half of the excitation energies of the known 0 + intruder bandheads in the neighboring 186,188 Pb isotopes. The combined results of the present work and the previous alpha-decay and laser spectroscopy studies present evidence for triple shape coexistence at low energy in the negative-parity configurations of 187 Pb, which is well reproduced by the potential-energy surface calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dinickel-Catalyzed N═N Bond Rotation

Azoarenes function as molecular switches that can be triggered by external stimuli, such as heat, light, and electrochemical potential. Here, in this work, we show that a dinickel catalyst can induce cis/trans isomerization in azoarenes through a N═N bond rotation mechanism. Catalytic intermediates containing azoarenes bound in both the cis and trans forms are characterized. Solid-state structures reveal the importance of π-back-bonding interactions from the dinickel active site in lowering the N═N bond order and accelerating bond rotation. The scope of the catalytic isomerization includes high-performance acyclic, cyclic, and polymeric azoarene switches.

adducts↗