Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Direct determination of the ionic charge distribution of helium and iron in He-3-rich solar energetic particle events

The first direct measurement of the ionic charge distribution of the helium isotopes and of iron in (He-3)-Fe-rich solar energetic particle events is reported. No significant contribution of singly ionized helium to the events is found. The two-sigma upper limits for the He-3(+)/He-3(2+) and He-4(+)/He-4(2+) ratios are 0.02 and 0.03, respectively. The mean charge state of iron found by averaging five (He-3)-Fe-rich solar energetic particle events is 19 + or -2, significantly larger than the iron charge state for energetic solar particles in normal composition events. These results appear to favor the resonant heating model proposed by Fisk (1978). It is concluded that temperatures in the source region exceed 5 million K in the events under study.

Klecker, B.↗

The mean ionic charges of N, Ne, MG, SI and S in solar energetic particle events

The mean ionic charges of nitrogen, neon, magnesium, silicon, and sulfur in solar flare particle events were determined for 12 flares during the time interval from September 1978 to September 1979. The observations were carried out with the MPI/UoMd ULEZEQ Sensor on the ISEE-3 satellite comparing the results with mean charge states established in a hot coronal plasma under equilibrium conditions, different temperatures for different elements are discussed. These range from approx. 2 million K to 7 million K in a single flare. From flare to flare the variation in temperature for each element is less than the variation between different ion species.

Luhn, A.↗

The mean ionic charge of silicon in 3HE-rich solar flares

Mean ionic charge of iron in 3He-rich solar flares and the average mean charge of Silicon for 23 #He-rich periods during the time interval from September 1978 to October 1979 were determined. It is indicated that the value of the mean charge state of Silicon is higher than the normal flare average by approximately 3 units and in perticular it is higher then the value predicted by resonant heating models for 3He-rich solar flares.

Luhn, A.↗

Ionic charge states of N, Ne, Mg, Si and S in solar energetic particle events

The mean ionic charges and source-region temperatures of flare-accelerated N, Ne, Mg, Si and S in three large solar-energetic-particle events during 1978-1979 are determined from ISEE-3 observations, extending the findings of Hovestadt et al. (1981) and Gloeckler et al. (1981) for C, He, O, and Fe. The results are presented in tables and graphs, and the charge states are shown to correspond to different source temperatures even in the same flare, assuming equilibration in the hot plasma. The electron temperatures range from 2 x 10 to the 6th K for C, N, O, Si, and S, 4 x 10 to the 6th K for Ne and Fe, and 7 x 10 to the 6th K for Mg. The possibility that these temperature inconsistencies reflect different stages in the approach to equilibrium is considered.

Luhn, A.↗

Ionic charge states of solar energetic particles - Effects of flare X-rays

Ionic charge states of solar energetic particles (SEP) from three flares have been reported by Luhn et al. (1984). Interpretations of the mean charges in terms of a source temperature Ts (assuming collisional ionization equilibrium) yield inconsistent results. For Mg, the required Ts (up to 8 x 10 to the 6th K) are larger than for N and Si by factors of up to 5. Here it is pointed out that flare X-rays photoionize the ambient corona, causing apparent ionization temperatures there to exceed the local electron temperature, Te. Using realistic flare X-ray fluxes, it is shown that the charge data for six elements (C, N, Ne, Mg, Si, and S) can be fitted if the source is at coronal temperatures (Te = 1-2 x 10 to the 6th K), but the ionization equilibrium is radiation dominated. For oxygen, a slight inconsistency persists in the three flares.

Mullan, D. J.↗

Temporal and vertical distribution of acidity and ionic composition in clouds - Comparison between modeling results and observations

Cyclic temporal variations of pH and ionic concentration in sampled clouds which traversed the Mt. Mitchell State Park (North Carolina) site during the summers of 1986, 1987, and 1988 are reported. These clouds typically had a measured pH minimum during their initial and final stages. The cause of this basic cylic pattern is attributed to sampling at different vertical levels of the cloud. This is substantiated by visual observations made while sampling. The results also suggest that the measured pH patterns do not always exhibit minima during the formative and dissipative stages of the cloud, apparently in response to the underlying dynamical processes. The relationship between temporal pH measurements made at a stationary site to vertical cloud levels provides insights into the physical processes (e.g., nucleation scavenging near cloud base, dry air entrainment near cloud top) influencing the observed cloud-water chemistry on a real-time basis and would improve cloud chemistry models.

Defelice, T. P.↗

Linear mixing rule in screened binary ionic mixtures

The validity of the linear mixing rule is examined for the following two cases (1) when the response of the electron gas is taken into account in the effective ionic interaction and (2) when finite-temperature effects are included in the dielectric response of the electrons, i.e., when the ions interact with both temperature- and density-dependent screened Coulomb potentials. It is found that the linear mixing rule remains valid when the electron response is taken into account in the interionic potential at any density, even though the departure from linearity can reach a few percent for the asymmetric mixtures in the region of weak degeneracy for the electron gas. A physical explanation of this behavior is proposed which is based on a simple additional length scale.

Chabrier, G.↗

Excited ionic and neutral fragments produced by dissociation of the N2(+)-asterisk H band

Atomic fluorescence produced by dissociative photoionization of N2 was observed and identified in experiments where fluorescent radiation was produced by irradiating N2 gas with undispersed synchrotron radiation. The spectrum was detected with a multichannel plate electron multiplier. Evidence is presented that the H band of N2(+)-asterisk does predissociate into excited neutral and ionic atoms.

Samson, James A. R.↗

Discrimination of ionic species from broad-beam ion sources

The performance of a broad-beam, three-grid, ion extraction system incorporating radio frequency (RF) mass discrimination was investigated experimentally. This testing demonstrated that the system, based on a modified single-stage Bennett mass spectrometer, can discriminate between ionic species having about a 2-to-1 mass ratio while producing a broad-beam of ions with low kinetic energy (less than 15 eV). Testing was conducted using either argon and krypton ions or atomic and diatomic oxygen ions. A simple one-dimensional model, which ignores magnetic field and space-charge effects, was developed to predict the species separation capabilities as well as the kinetic energies of the extracted ions. The experimental results correlated well with the model predictions. This RF mass discrimination system can be used in applications where both atomic and diatomic ions are produced, but a beam of only one of the species is desired. An example of such an application is a 5 eV atomic oxygen source. This source would produce a beam of atomic oxygen with 5 eV kinetic energy, which would be directed onto a material specimen, to simulate the interaction between the surface of a satellite and the rarefied atmosphere encountered in low-Earth orbit.

Anderson, J. R.↗

Pycnonuclear reaction rates for binary ionic mixtures

Through a combination of compositional scaling arguments and examinations of Monte Carlo simulation results for the interparticle separations in binary-ionic mixture (BIM) solids, we have derived parameterized expressions for the BIM pycnonuclear rates as generalizations of those in one-component solids obtained previously by Salpeter and Van Horn and by Ogata et al. We have thereby discovered a catalyzing effect of the heavier elements, which enhances the rates of reactions among the lighter elements when the charge ratio exceeds a critical value of approximately 2.3.

Ichimaru, S.↗

The susceptibility critical exponent for a nonaqueous ionic binary mixture near a consolute point

We report turbidity measurements of a nonaqueous ionic solution of triethyl n-hexylammonium triethyl n-hexylboride in diphenyl ether. A classical susceptibility critical exponent gamma = 1.01 +/- 0.01 is obtained over the reduced temperature range t between values of 0.1 and 0.0001. The best fits of the sample transmission had a standard deviation of 0.39 percent over this range. Ising and spherical model critical exponents are firmly excluded. The correlation length amplitude xi sub 0 from fitting is 1.0 +/- 0.2 nm which is much larger than values found in neutral fluids and some aqueous binary mixtures.

Zhang, Kai C.↗

The mean ionic charge state of solar energetic Fe ions above 200 MeV per nucleon

We have analyzed the geomagnetic transmission of solar energetic Fe ions at approximately 200-600 MeV per nucleon during the great solar energetic particle (SEP) events of 1989 September-October. By comparing fluences from the Chicago charged-particle telescope on IMP-8 in interplanetary space and from NRL's Heavy Ions in Space (HIIS) experiment aboard the Long Duration Exposure Facility (LDEF) in low-Earth orbit, we obtain a mean ionic charge (Q(sub 3)) = 14.2 +/- 1.4. This result is significantly lower than (Q) observed at approximately 1 MeV per nucleon in impulsive, He-3 rich SEP events, indicating that neither acceleration at the flare site nor flare-heated plasma significantly contributes to the high-energy Fe ions we observe. But it agrees well with the (Q) observed in gradual SEP events at approximately 1 MeV per nucleon, in which ions are accelerated by shocks driven by fast coronal mass ejections, and hence shows that particles are accelerated to very high energies in this way. We also note apparent differences between solar wind and SEP charge state distributions, which may favor a coronal (rather than solar wind) seed population or may suggest additional ionization in the ambient shock-region plasma.

Tylka, A. J.↗

Asian Influence Over the Western North Pacific during the Fall Season: Inferences from Lead 210, Soluble Ionic Species and Ozone

Aerosol samples collected over the western Pacific during the NASA/Global Tropospheric Experiment Pacific Exploratory Mission (PEM-West A) expedition (September - October 1991) revealed mean Pb-210 concentrations in the free troposphere in the 5-10 fCi m(exp -3) STP range. Most soluble ionic aerosol-associated species were near detection limits [much less than 40 parts per trillion by volume (pptv)] in these same samples. The altitude distribution of O3 near Asia closely resembled that of Pb-210, while no relationship was found between the concentrations of O3 and Be-7. Free tropospheric air over the western Pacific was depleted in soluble aerosol-associated species but enriched in Pb-210 and O3, indicative of deep wet convection over the Asian continent. The influence of Asian air on the composition of the free troposphere over the western Pacific was evident on most of the PEM-West A flights. However, evidence of continental influence was largely restricted to those species that are relatively insoluble (or have insoluble precursors), hence escape scavenging during vertical transport from the boundary layer into the free troposphere by wet convective activity.

Dibb, J. E.↗

Ionic Polymer-Metal Composites (IPMCs) as Biomimetic Sensors, Actuators and Artificial Muscles: A Review

This paper presents an introduction to ionic polymer-metal composites and some mathematical modeling pertaining to them. It further discusses a number of recent findings in connection with ion-exchange polymer-metal composites (IPMCS) as biomimetic sensors and actuators. Strips of these composites can undergo large bending and flapping displacement if an electric field is imposed across their thickness. Thus, in this sense they are large motion actuators. Conversely by bending the composite strip, either quasi-statically or dynamically, a voltage is produced across the thickness of the strip. Thus, they are also large motion sensors. The output voltage can be calibrated for a standard size sensor and correlated to the applied loads or stresses. They can be manufactured and cut in any size and shape. In this paper first the sensing capability of these materials is reported. The preliminary results show the existence of a linear relationship between the output voltage and the imposed displacement for almost all cases. Furthermore, the ability of these IPMCs as large motion actuators and robotic manipulators is presented. Several muscle configurations are constructed to demonstrate the capabilities of these IPMC actuators. This paper further identifies key parameters involving the vibrational and resonance characteristics of sensors and actuators made with IPMCS. When the applied signal frequency varies, so does the displacement up to a critical frequency called the resonant frequency where maximum deformation is observed, beyond which the actuator response is diminished. A data acquisition system was used to measure the parameters involved and record the results in real time basis. Also the load characterizations of the IPMCs were measured and it was shown that these actuators exhibit good force to weight characteristics in the presence of low applied voltages. Finally reported are the cryogenic properties of these muscles for potential utilization in an outer space environment of a few Torrs and temperatures of the order of - 140 degrees Celsius. These muscles are shown to work quite well in such harsh cryogenic environments and thus present a great potential as sensors and actuators that can operate at cryogenic temperatures.

Shahinpoor, M.↗

Convection Induced by High Frequency Rotating Magnetic Field in Ionic Aqueous Solutions

Rotating magnetic fields (RMF) have found applications in modern metallurgy. Examples are casting and semiconductor crystal growth technology. Rotating convective flows can also be induced in ionic fluids. Due to optical transparency, these fluids offer a great opportunity to visualize convection. In this work, we investigate the dynamics of convection induced by a high frequency (100 kHz range) RMF. A dye injected into a cylindrical column of salty water serves as an indicator of the flow. The developed technique has been used to study mixing phenomena induced by a RMF both when the direc'tion of the field rotation is constant and when it is alternated. Optical recording has been used to analyze this process. A numerical model describing RMF mixing in the laminar regime will also be presented.

Volz, Martin P.↗

Electrical Impedance of Ionic Polymeric Metal Composites

In recent years the use of ionic polymer metal composites such as Nafion-based platinum ionomers have emerged as electroactive polymer materials with great potential for robotics and other applications. An effective activation of these materials requires understanding of their mechanism of operation. Generally, the material needs to be maintained hydrated to assure its electromechanical activity. To allow the control of the response of the material, a study is underway to investigate the electrical response. Particular emphasis is placed on possible electrochemical reactions and deviations from linear dielectric behavior. Currently, efforts are made to determine the necessary drive characteristics of the source to allow low power operation (< or = 1.0 W) of the material as an actuator.

Leary, S.↗

Rapid Measurements of Aerosol Ionic Composition and 3-10 nm Particle Size Distributions On The NASA P3 To Better Quantify Processes Affecting Aerosols Advected From East Asia

The Particle Into Liquid Sample (PILS) was deployed on the NASA P3 for airborne measurements of fine particle ionic chemical composition. The data have been quality assured and reside in the NASA data archive. We have analyzed our data to characterize the sources and atmospheric processing of fine aerosol particles advected from the region during the experiments. Fine particle water-soluble potassium was found to serve as a useful aerosol tracer for biomass smoke. Ratios of PILS potassium to sulfate are used as a means of estimating the percent contribution of biomass burning to fine particle mass in mixed plumes advecting from Asia. The high correlations between K+ and NO3(sup -) and NH4(sup +)' indicated that biomass burning was a significant source of these aerosol compounds in the region. It is noteworthy that the air mass containing the highest concentrations of fine particles recorded in all of ACE-Asia and TRACE-P appeared to be advecting from the Bejing/Tientsin urban region and also had the highest K(+), NO3(sup -) and NH4(sup +) concentrations of both studies. Based on K+/SO4(sup 2-) ratio's, we estimated that the plume was composed of approx. 60% biomass burning emissions, possibly from the use of bio-fuels in the urban regions.

Weber, Rodney J.↗