Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high-order method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

11-th order of accuracy for numerical solution of 3-D Poisson equation with irregular interfaces on unfitted Cartesian meshes

For the first time the optimal local truncation error method (OLTEM) with 125-point stencils and unfitted Cartesian meshes has been developed in the general 3-D case for the Poisson equation for heterogeneous materials with smooth irregular interfaces. The 125-point stencils equations that are similar to those for quadratic finite elements are used for OLTEM. The interface conditions for OLTEM are imposed as constraints at a small number of interface points and do not require the introduction of additional unknowns, i.e., the sparse structure of global discrete equations of OLTEM is the same for homogeneous and heterogeneous materials. The stencils coefficients of OLTEM are calculated by the minimization of the local truncation error of the stencil equations. These derivations include the use of the Poisson equation for the relationship between the different spatial derivatives. Such a procedure provides the maximum possible accuracy of the discrete equations of OLTEM. In contrast to known numerical techniques with quadratic elements and third order of accuracy on conforming and unfitted meshes, OLTEM with the 125-point stencils provides 11-th order of accuracy, i.e., an extremely large increase in accuracy by 8 orders for similar stencils. The numerical results show that OLTEM yields much more accurate results than high-order finite elements with much wider stencils. The increased numerical accuracy of OLTEM leads to an extremely large increase in computational efficiency. Additionally, a new post-processing procedure with the 125-point stencil has been developed for the calculation of the spatial derivatives of the primary function. The post-processing procedure includes the minimization of the local truncation error and the use of the Poisson equation. It is demonstrated that the use of the partial differential equation (PDE) for the 125-point stencils improves the accuracy of the spatial derivatives by 6 orders compared to post-processing without the use of PDE as in existing numerical techniques. At an accuracy of 0.1% for the spatial derivatives, OLTEM reduces the number of degrees of freedom by 900 - 4∙10 6 times compared to quadratic finite elements. The developed post-processing procedure can be easily extended to unstructured meshes and can be independently used with existing post-processing techniques (e.g., with finite elements).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Enhanced MPM framework with multipatch isogeometric analysis for geotechnical applications

Achieving stable stress solutions at large strains using the Material Point Method (MPM) is challenging due to the accumulation of errors associated with geometry discretization, cell-crossing noise, and volumetric locking. Several simplified attempts exist in the literature to mitigate these errors, including higher-order frameworks. However, the stability of the MPM solution in such frameworks has been limited to simple geometries and the single-phase formulation (i.e., neglecting pore fluid). Although never explored, multipatch isogeometric analysis offers desirable qualities to simulate complex geometries while mitigating errors in the MPM. The degree of required high-order spatial integration has also never been investigated to infer a minimum limit for the stability of the stress solution in MPM. This paper presents a general-purpose numerical framework for simulating stable stresses in porous media, capturing both near incompressibility and multiphase interactions. First, the numerical framework is presented considering Non-Uniform Rational B-splines (NURBS) to perform isogeometric analysis (IGA) in MPM. Additionally, a volumetric strain smoothing algorithm is used to alleviate errors associated with volumetric locking. Second, the manifestation of cell-crossing errors is assessed via a series of problems with orders ranging from linear to cubic interpolation functions. Third, the use of NURBS is investigated and verified for problems with circular geometries. Finally, multipatch analysis is deployed to simulate plane strain and 3D penetration in soils, considering nearly incompressible elastoplastic (total stress) analysis and fully-coupled hydro-mechanical (effective stress) analysis. The stability of the solution is also analyzed for different constitutive models. From the results, it can be concluded that the framework using cubic interpolation functions with strain smoothing is the most convenient, presenting stable stress solutions for a broad range of multiphase geotechnical applications.

58 GEOSCIENCES↗
DOE OSTI2024

Optimal local truncation error method for 3-D elasticity interface problems

The paper deals with a new effective numerical technique on unfitted Cartesian meshes for simulations of heterogeneous elastic materials. Here, we develop the optimal local truncation error method (OLTEM) with 27- point stencils (similar to those for linear finite elements) for the 3-D time-independent elasticity equations with irregular interfaces. Only displacement unknowns at each internal Cartesian grid point are used. The interface conditions are added to the expression for the local truncation error and do not change the width of the stencils. The unknown stencil coefficients are calculated by the minimization of the local truncation error of the stencil equations and yield the optimal second order of accuracy for OLTEM with the 27-point stencils on unfitted Cartesian meshes. A new post-processing procedure for accurate stress calculations has been developed. Similar to basic computations it uses OLTEM with the 27-point stencils and the elasticity equations. The post-processing procedure can be easily extended to unstructured meshes and can be independently used with existing numerical techniques (e.g., with finite elements). Numerical experiments show that at an accuracy of 0.1% for stresses, OLTEM with the new post-processing procedure significantly (by 10 5 -10 9 times) reduces the number of degrees of freedom compared to linear finite elements. OLTEM with the 27-point stencils yields even more accurate results than high-order finite elements with wider stencils.

42 ENGINEERING↗
DOE OSTI2024

Continuously bounds-preserving discontinuous Galerkin methods for hyperbolic conservation laws

For finite element approximations of transport phenomena, it is often necessary to apply a form of limiting to ensure that the discrete solution remains well-behaved and satisfies physical constraints. However, these limiting procedures are typically performed at discrete nodal locations, which is not sufficient to ensure the robustness of the scheme when the solution must be evaluated at arbitrary locations (e.g., for adaptive mesh refinement, remapping in arbitrary Lagrangian–Eulerian solvers, overset meshes, etc.). In this work, a novel limiting approach for discontinuous Galerkin methods is presented which ensures that the solution is continuously bounds-preserving (i.e., across the entire solution polynomial) for any arbitrary choice of basis, approximation order, and mesh element type. Through a modified formulation for the constraint functionals, the proposed approach requires only the solution of a single spatial scalar minimization problem per element for which a highly efficient numerical optimization procedure is presented. Here, the efficacy of this approach is shown in numerical experiments by enforcing continuous constraints in high-order unstructured discontinuous Galerkin discretizations of hyperbolic conservation laws, ranging from scalar transport with maximum principle preserving constraints to compressible gas dynamics with positivity-preserving constraints.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Accelerating high-order continuum kinetic plasma simulations using multiple GPUs

Kinetic plasma simulations solve the Vlasov-Poisson or Vlasov-Maxwell equations to evolve scalar-variable distribution functions in position-velocity phase space and vector-variable electromagnetic fields in configuration space. The immense computational cost of evolving high-dimensional variables, and their large number of degrees of freedom, often limits the utility of continuum kinetic simulations and presents a challenge when it comes to accurately simulating real-world physical phenomena. To address this challenge, we present techniques that accelerate and minimize the computational work required for a scalable Vlasov-Poisson solver. We show theoretical hardware compute and communication bounds for solving a fourth-order finite-volume Vlasov-Poisson system. These bounds are then used to inform and evaluate the design of performance portable algorithms for a multiple graphics processing unit (GPU) accelerated version of the Vlasov-Poisson solver VCK-CPU [1]. We demonstrate that the multi-GPU Vlasov solver implementation, VCK-GPU, simultaneously minimizes required inter-process data transfer while also being bounded by the machine network performance limits. This results in an overall strong scaling speedup per timestep of up to 40x in three-dimensional phase space (one position, two velocity coordinates) and 54x in four dimensional phase space (two position, two velocity coordinates) and a 341x increase in simulation throughput of the GPU accelerated code over the existing CPU code. The GPU code is also able to weak scale up to 256 compute nodes and 1024 GPUs. In conclusion, we demonstrate that the improved compute performance enables exploring configurations which were previously computationally infeasible, including resolving fine-scale distribution function filamentation and multi-species dynamics with realistic electron-proton mass ratios.

Continuum kinetics↗
DOE OSTI2025

On optimal control of hybrid dynamical systems using complementarity constraints

Optimal control for switch-based dynamical systems is a challenging problem in the process control literature. In this study, we model these systems as hybrid dynamical systems with finite number of unknown switching points and reformulate them using non-smooth and non-convex complementarity constraints as a mathematical program with complementarity constraints (MPCC). We utilize a moving finite element based strategy to discretize the differential equation system to accurately locate the unknown switching points at the finite element boundary and achieve high-order accuracy at intermediate non-collocation points. We propose a globalization approach to solve the discretized MPCC problem using a mixed NLP/MILP-based strategy to converge to a non-spurious first-order optimal solution. The method is tested on three dynamic optimization examples, including a gas–liquid tank model and an optimal control problem with a sliding mode solution.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

E(n)-Equivariant cartesian tensor message passing interatomic potential

Machine learning potential (MLP) has been a popular topic in recent years for its capability to replace expensive first-principles calculations in some large systems. Meanwhile, message passing networks have gained significant attention due to their remarkable accuracy, and a wave of message passing networks based on Cartesian coordinates has emerged. However, the information of the node in these models is usually limited to scalars, and vectors. In this work, we propose High-order Tensor message Passing interatomic Potential (HotPP), an E(n) equivariant message passing neural network that extends the node embedding and message to an arbitrary order tensor. By performing some basic equivariant operations, high order tensors can be coupled very simply and thus the model can make direct predictions of high-order tensors such as dipole moments and polarizabilities without any modifications. The tests in several datasets show that HotPP not only achieves high accuracy in predicting target properties, but also successfully performs tasks such as calculating phonon spectra, infrared spectra, and Raman spectra, demonstrating its potential as a tool for future research.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Lattice-QCD Computable Quark Correlation Functions at Three-Loop Order and Extraction of Splitting Functions

We present the first complete next-to-next-to-next-to-leading-order calculation of the matching coefficients that link unpolarized flavor nonsinglet parton distribution functions with lattice QCD computable correlation functions. By using this high-order result, we notice a reduction in theoretical uncertainties compared to relying solely on previously known lower-order matching coefficients. Furthermore, based on this result we have extracted the three-loop unpolarized flavor nonsinglet splitting function, which is in agreement with the state-of-the-art result. Because of the simplicity of our method, it has the potential to advance the calculation of splitting functions to the desired four-loop order.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Multiparticle integral and differential correlation functions

This paper formalizes the use of integral and differential cumulants for measurements of multiparticle event-by-event transverse momentum fluctuations, rapidity fluctuations, as well as net-charge fluctuations. This enables the introduction of multiparticle balance functions, defined based on differential correlation functions (factorial cumulants), that suppress two- and three-prong resonance decays effects and enable measurements of underlying long-range correlations obeying quantum number conservation constraints. These multiparticle balance functions satisfy simple sum rules determined by quantum number conservation. It is additionally shown that these multiparticle balance functions arise as an intrinsic component of high-order net-charge cumulants. This implies that the magnitude of these cumulants, measured in a specific experimental acceptance, is strictly constrained by charge conservation and primarily determined by the rapidity and momentum width of these balance functions. The paper also presents techniques to reduce the computation time of differential correlation functions up to order n = 10 based on the methods of moments. Published by the American Physical Society 2024

Physics↗
DOE OSTI2024

A Semi-Analytical Approach for State-Space Electromagnetic Transient Simulation

Here, this paper proposes a semi-analytical approach for efficient and accurate electromagnetic transient (EMT) simulation of a power grid. The approach first derives a high-order semi-analytical solution (SAS) of the grid’s state-space EMT model using the differential transformation (DT), and then evaluates the solution over enlarged, variable time steps to significantly accelerate the simulations while maintaining its high accuracy on detailed fast EMT dynamics. The approach also addresses switches during large time steps by using a limit violation detection algorithm with a binary search-enhanced quadratic interpolation. Case studies are conducted on EMT models of the IEEE 39-bus system and large-scale systems to demonstrate the merits of the new simulation approach against traditional numerical methods.

electromagnetic transient↗
DOE OSTI2024

Singular Perturbation-Based Large-Signal Order Reduction of Microgrids for Stability and Accuracy Synthesis With Control

The increasing penetration of distributed energy resources (DERs) highlights the growing importance of microgrids (MGs) in enhancing power system reliability. Employing electromagnetic transient (EMT) analysis in MGs becomes crucial for controlling the rapid transients. However, this requires an accurate but high-order model of power electronics and their underlying control loops, complexifying the stability analysis from the viewpoint of a higher control level. To overcome these challenges, this paper proposes a large-signal order reduction (LSOR) method for MGs with considerations of external control inputs and the detailed dynamics of underlying control levels based on singular perturbation theory (SPT). Specially, we innovatively proposed and strictly proved a general stability and accuracy assessment theorem that allows us to analyze the dynamic stability of a full-order nonlinear system by only leveraging our derived reduced-order model (ROM) and boundary layer model (BLM). Furthermore, this theorem furnishes a set of conditions that determine the accuracy of the developed ROM. Lastly, by embedding such a theorem into the SPT, we propose a novel LSOR approach with guaranteed accuracy and stability analysis equivalence. Case studies are conducted on MG systems to show the effectiveness of the proposed approach.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Fast Multigrid Reduction-in-Time for Advection via Modified Semi-Lagrangian Coarse-Grid Operators

Many iterative parallel-in-time algorithms have been shown to be highly efficient for diffusion-dominated partial differential equations (PDEs) but are inefficient or even divergent when applied to advection-dominated PDEs. We consider the application of the multigrid reduction-in-time (MGRIT) algorithm to linear advection PDEs. Here, the key to efficient time integration with this method is using a coarse-grid operator that provides a sufficiently accurate approximation to the so-called ideal coarse-grid operator. For certain classes of semi-Lagrangian discretizations, we present a novel semi-Lagrangian-based coarse-grid operator that leads to fast and scalable multilevel time integration of linear advection PDEs. The coarse-grid operator is composed of a semi-Lagrangian discretization followed by a correction term, with the correction designed so that the leading-order truncation error of the composite operator is approximately equal to that of the ideal coarse-grid operator. Parallel results show substantial speed-ups over sequential time integration for variable-wave-speed advection problems in one and two spatial dimensions, and using high-order discretizations up to order five. The proposed approach establishes the first practical method that provides small and scalable MGRIT iteration counts for advection problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

A Fourth-Order Embedded Boundary Finite Volume Method for the Unsteady Stokes Equations with Complex Geometries

A fourth-order finite volume embedded boundary (EB) method is presented for the unsteady Stokes equations. The algorithm represents complex geometries on a Cartesian grid using EB, employing a technique to mitigate the ``small cut-cell"" problem without mesh modifications, cell merging, or state redistribution. Spatial discretizations are based on a weighted least-squares technique that has been extended to fourth-order operators and boundary conditions, including an approximate projection to enforce the divergence-free constraint. Solutions are advanced in time using a fourth-order additive implicit-explicit Runge-Kutta method, with the viscous and source terms treated implicitly and explicitly, respectively. Formal accuracy of the method is demonstrated with several grid convergence studies, and results are shown for an application with a complex bio-inspired material. In conclusion, the developed method achieves fourth-order accuracy and is stable despite the pervasive small cells arising from complex geometries.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Bias-Variance Trade-Off in Physics-Informed Neural Networks with Randomized Smoothing for High-Dimensional PDEs

Physics-Informed Neural Networks (PINNs) have triggered a paradigm shift in scientific computing, leveraging mesh-free properties and robust approximation capabilities. While proving effective for low-dimensional partial differential equations (PDEs), the computational cost of PINNs remains a hurdle in high-dimensional scenarios. This is particularly pronounced when computing high-order and high-dimensional derivatives in the physics-informed loss. Randomized Smoothing PINN (RS-PINN) introduces Gaussian noise for stochastic smoothing of the original neural net model, enabling the use of Monte Carlo methods for derivative approximation, which eliminates the need for costly automatic differentiation. Despite its computational efficiency, especially in the approximation of high-dimensional derivatives, RS-PINN introduces biases in both loss and gradients, negatively impacting convergence, especially when coupled with stochastic gradient descent (SGD) algorithms. We present a comprehensive analysis of biases in RS-PINN, attributing them to the nonlinearity of the Mean Squared Error (MSE) loss as well as the intrinsic nonlinearity of the PDE itself. We propose tailored bias correction techniques, delineating their application based on the order of PDE nonlinearity. The derivation of an unbiased RS-PINN allows for a detailed examination of its advantages and disadvantages compared to the biased version. Specifically, the biased version has a lower variance and runs faster than the unbiased version, but it is less accurate due to the bias. To optimize the bias-variance trade-off, we combine the two approaches in a hybrid method that balances the rapid convergence of the biased version with the high accuracy of the unbiased version. In addition to methodological contributions, we present an enhanced implementation of RS-PINN. Extensive experiments on diverse high-dimensional PDEs, including Fokker-Planck, Hamilton-Jacobi-Bellman (HJB), viscous Burgers’, Allen-Cahn, and Sine-Gordon equations, illustrate the bias-variance trade-off and highlight the effectiveness of the hybrid RS-PINN. Empirical guidelines are provided for selecting biased, unbiased, or hybrid versions, depending on the dimensionality and nonlinearity of the specific PDE problem.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

High-Order Hybrid RANS-LES Study of NACA0012 Wing Sections

We develop hybrid RANS-LES strategies within Nek5000 for application to airfoil sections at small flight configurations. We present a validation and verification study of $k \space – \space \tau$ SST applied to a NACA 0012 wing section in a pure RANS and in a hybrid RANS-LES setup. The study shows good corroboration with existing experimental and numerical datasets. We also analyze some of the observed discrepancies with the experiments by evaluating the side wall “blocking” effect. We demonstrate that for the hybrid turbulence modeling approach a high-order spectral- element discretization converges faster (i.e., with less resolution) than a representative low-order finite-volume-based approach.

42 ENGINEERING↗
DOE OSTI2025

Numerical Analysis of High-Order Modes in SRF Resonators for Particle Accelerators

Over the past decades, superconducting technology has rapidly evolved towards high accelerating gradients and low surface resistance, making it possible to operate particle accelerators with high average beam currents and large duty factors. However, RF losses due to coherent excitation of the HOM become the limiting factor for these regimes. Unlike the cavity operating mode, which is tuned separately, the HOM parameters can significantly vary from one cavity to another due to finite mechanical tolerances during the manufacturing process. Thus, it is of utmost importance to know the HOM parameter spread in advance in order to predict unexpected cryogenic losses, overheating of beam line components and maintain stable beam dynamics. In this paper, we present a method for generating cavity geometry with an arbitrary spread of mechanical imperfections and numerically evaluating HOM statistics. Knowing the spread of HOM parameters, we calculated the probability of resonant HOM losses in SRF accelerating cavities used in CW beam current machines such as the PIP-II and LCLS-II linacs, as well as for the SRF crab-cavity for the ILC project. Finally, we present experimental results of HOM spectra measurements in hundreds of 1.3 GHz cavities installed in LCLS-II cryomodules. Studying the effects of HOM excitation results in specifications of the SRF cavity and cryomodule and can significantly impact the efficiency and reliability of the machine operation.

Lunin, Andrei [Fermilab] (ORCID:0000000290096792)↗
DOE OSTI2024

High-Order Wall-Modeled Large-Eddy Simulation of High-Lift Configuration

This paper presents the assessment of several recent enhancements for a high-order wall-modeled large-eddy simulation (WMLES) approach and demonstrates order independence with a fixed data exchange location in the wall model. The two enhancements include the use of isotropic tetrahedral elements to improve accuracy and an explicit subgrid-scale model, the Vreman model, to improve accuracy and robustness. The [Formula: see text] study focused on the high-lift Common Research Model (HL-CRM) at the angle of attack of 19.57 deg, a benchmark problem from the 4th AIAA High-Lift Prediction Workshop. Solution polynomial orders of [Formula: see text], and 5 were used in the study. The study demonstrated [Formula: see text] independence in integrated forces, pitch moment, velocity profile in the wall-normal direction, and surface flow topology. It also showed that a [Formula: see text] order of at least 3 ([Formula: see text]) was needed to correctly predict the external inviscid flow and the surface flow topology. Thereafter, [Formula: see text] simulations over several other angles of attack demonstrated that the high-order WMLES approach can correctly predict the maximum lift and flow separation regions for HL-CRM with about 40 million degrees of freedom (DOF) compared to at least 250 million DOF required by second-order methods.

Engineering↗
DOE OSTI2024

The inviscid incompressible limit of Kelvin–Helmholtz instability for plasmas

The Kelvin–Helmholtz Instability (KHI) is an interface instability that develops between two fluids or plasmas flowing with a common shear layer. KHI occurs in astrophysical jets, solar atmosphere, solar flows, cometary tails, planetary magnetospheres. Two applications of interest, encompassing both space and fusion applications, drive this study: KHI formation at the outer flanks of the Earth’s magnetosphere and KHI growth from non-uniform laser heating in magnetized direct-drive implosion experiments. Here, we study 2D KHI with or without a magnetic field parallel to the flow. We use both the GAMERA code, which solves the compressible Euler equations, and the STRATOSPEC code, which solves the Navier-Stokes equations under the Boussinesq approximation, coupled with the magnetic field dynamics. GAMERA is a global three-dimensional MHD code with high-order reconstruction in arbitrary nonorthogonal curvilinear coordinates, which is developed for a large range of astrophysical applications. STRATOSPEC is a three-dimensional pseudo-spectral code with an accuracy of infinite order (no numerical diffusion). Magnetized KHI is a canonical case for benchmarking hydrocode simulations with extended MHD options. An objective is to assess whether or not, and under which conditions, the incompressibility hypothesis allows to describe a dynamic compressible system. For comparing both codes, we reach the inviscid incompressible regime, by decreasing the Mach number in GAMERA, and viscosity and diffusion in STRATOSPEC. Here, we specifically investigate both single-mode and multi-mode initial perturbations, either with or without magnetic field parallel to the flow. The method relies on comparisons of the density fields, 1D profiles of physical quantities averaged along the flow direction, and scale-by-scale spectral densities. We also address the triggering, formation and damping of filamentary structures under varying Mach number or Atwood number, with or without a parallel magnetic field. Comparisons show very satisfactory results between the two codes. The vortices dynamics is well reproduced, along with the breaking or damping of small-scale structures. We end with the extraction of growth rates of magnetized KHI from the compressible regime to the incompressible limit in the linear regime assessing the effects of compressibility under increasing magnetic field. The observed differences between the two codes are explained either from diffusion or non-Boussinesq effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗