SEARCH · Engineering Papers
Results for “high temperature superconducting”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Process Innovations for High Temperature Superconducting (HTS) Wire Manufacturing
Thermal and strain cycling tests for STI’s coated conductor have been performed with our newly updated critical current/tensile tester. The original goal was to carry out 1000 thermal cycles and 1000 strain cycles and measure Ic for pre and post cycling. The tape exceeded the goal. Thermal testing was successful with 2900 cycles and strain testing was carried out for 2000 cycles without any significant Ic degradation. Another important milestone was to produce lengths greater than 100m, a 2X improvement over reported performance reported in Q4/2019 report was completed.
Innovative Joints for High-Temperature Superconducting Tapes
The CRADA was terminated due to changes in the Participant's business priorities. Brookhaven National Laboratory’s involvement was limited to meetings with the Participant and preliminary investigations conducted by the Principal Investigator. No technical milestones or outcomes were achieved prior to termination.
Novel three-in-one high-temperature-superconducting DC cables for grid revolution
Abstract not provided.
Novel three-in-one high-temperature-superconducting DC cables for grid revolution
Explore the source record for details and available documents.
Evidence for a common high-temperature superconducting effect in La(1.85)Sr(0.15)CuO4 and YBa2Cu3O7
The paper reports the positron-annihilation lifetime and Doppler-broadening energy spectra in La(1.85)Sr(0.15)CuO4 superconductors for T = 10-297 K. A strong temperature dependence in positron lifetime and momentum distribution parameters is observed for positron-electron annihilation data while the sample is in the superconducting state, but not while it is in the normal state. Experimental evidence is presented that the superconducting mechanisms in La(1.85)Sr(0.15)CuO4 and YBa2Cu3O7 are similar and it is suggested that this is a consequence of a common physics involving the delicate balance between localized- and itinerant-electron behavior.
Feasibility of using high temperature superconducting magnets and conventional magnetic loop antennas to attract or repel objects at the space station
A study was undertaken to see if magnetic forces can be used at the Space Station to attract or repel spacecrafts such as the Orbital Manuevering Vehicle (OMV) or the Orbiter. A large magnet, in the form of a current loop, is assumed to be placed at the Space Station and another one on the spacecraft. The expression for the force between the two dipoles (loops) is obtained. Using a force of 15 Newtons (3.4 pounds) in order to move the spacecraft, the number of ampere-turn needed in the current loops was calculated at various distances between them. The expression for the force of attraction between a current loop and a soft magnetic material was also examined and the number of amp-turn needed to provide a force of one-tenth of a pound at various distances is also calculated. This one tenth of a pound force would be used in a life line system for the retrieval of an adrift crewman or tool at the Space Station. The feasibility of using conventional antenna on the Station and the incoming vehicle for attraction or repulsion was also examined.
High temperature superconducting thin film microwave circuits: Fabrication, characterization, and applications
Epitaxial YBa2Cu3O7 films were grown on several microwave substrates. Surface resistance and penetration depth measurements were performed to determine the quality of these films. Here the properties of these films on key microwave substrates are described. The fabrication and characterization of a microwave ring resonator circuit to determine transmission line losses are presented. Lower losses than those observed in gold resonator circuits were observed at temperatures lower than critical transition temperature. Based on these results, potential applications of microwave superconducting circuits such as filters, resonators, oscillators, phase shifters, and antenna elements in space communication systems are identified.
A simple method for characterizing the RF properties of high-temperature superconductive materials
A simple method using a resonant strip in a rectangular waveguide has been devised for superconductive material characterization. The method has the advantages of simplicity; and it requires only a small piece of the superconductive material. The resonant frequency of the superconductive strip can be predicted theoretically.
High temperature superconductive microwave technology for space applications
Progress being made on space application technology research on film fabrication, passive microwave circuits, and semiconductor devices for cryogenic circuits is reviewed. Achievements in YBCO and TCBCO films are addressed along with circuit evaluations of microstrip resonators, phase shifters, microstrip filters, dielectric resonator filters, and superconducting antennas.
High temperature superconducting thin film microwave circuits - Fabrication, characterization, and applications
Epitaxial YBa2Cu3O7 films were grown on several microwave substrates. Surface resistance and penetration depth measurements were performed to determine the quality of these films. Here, the properties of these films on key microwave substrates are described. The fabrication and characterization of a microwave ring resonator circuit to determine transmission line losses are presented. Lower losses than those observed in gold resonator circuits were observed at temperatures lower than critical transition temperature. Based on these results, potential applications of microwave superconducting circuits such as filters, resonators, oscillators, phase shifters, and antenna elements in space communication systems are identified.
Performance of a four-element Ka-band high-temperature superconducting microstrip antenna
Superconducting four-element microstrip array antennas operating at 30 GHz have been designed and fabricated on a lanthanum aluminate (LaAlO3) substrates. The experimental performance of these thin film Y-Ba-Cu-O superconducting antennas is compared with that of identical antenna patterned with evaporated gold. Efficiency measurements of these antennas show an improvement of 2 dB at 70 K and as much as 3.5 dB at 40 K in the superconducting antenna over the gold antenna.
Insertion loss and noise-temperature contribution of high-temperature superconducting bandpass filters centered at 2.3 and 8.45 GHz
Two superconducting Tl-Ca-Cu-Ba-O bandpass filters were fabricated for JPL by Superconductor Technologies Incorporated, Santa Barbara, California. The filters were designed to operate at 2.3 GHz (S-band) with a 0.5-dB bandwidth of 60 MHz and at 8.45 GHz (X-band) with a 0.5-dB bandwidth of 150 MHz. The structure selected for both filters incorporates half-wavelength thin-film resonators in a stripline configuration. The S-band filter uses an edge-coupled interdigital design and the X-band filter uses an end-coupled design. The insertion loss and the noise-temperature contribution were measured at 12 K for both filters.
The oxygen content of the high-temperature superconducting compound Bi(2+x)Sr(3-y)CayCu2O(8+d) with respect to varying Ca and Bi contents
The oxygen content of Bi(2+x)Sr(3-y)Cu2O(8+d) (2212 phase) has been determined as a function of its cation concentration. With increasing Ca and Bi content the oxygen content increases and T(sub c) decreases. The oxygen content of Ca rich 2212 phase increases with decreasing annealing temperatures. The study shows that the T(sub c) of the 2212 phase primarily is controlled by its cation concentration.
Pb solubility of the high-temperature superconducting phase Bi2Sr2Ca2Cu3O(10+d)
For the nominal composition of Bi(2.27-x)Pb(x)Sr2 Ca2 Cu3 O(10+d) lead content was varied from x = 0.05 to 0.45. The compositions were examined between 830 and 890 C which is supposed to be the temperature range over which the so-called 2223 phase (Bi2Sr2Ca2Cu3O(10+d)) is stable. Only compositions between x = 0.18 to 0.36 could be synthesized in a single phase state. For x is greater than 0.36 a lead containing phase with a stoichiometry of Pb4(Sr,Ca)5CuO(d) is formed, for x is less than 0.18 mainly Bi2Sr2CaCu2O(10+d) and cuprates are the equilibrium phases. The temperature range for the 2223 phase was found to be 830 to 890 C but the 2223 phase has extremely varying cation ratios over this temperature range. Former single phase 2223 samples turn to multi phase samples when annealed at slightly higher or lower temperatures. A decrease in the Pb solubility with increasing temperature was found for the 2223 phase.
Mechanical properties of high-temperature superconducting wires
Bending strength, fracture toughness, and elastic modulus data were acquired for YBa2Cu3O(x), Bi2Sr2CaCu2O(x) (Bi,Pb)2Sr2Ca2Cu3O(x), and Tl2Ba2Ca2Cu3O(x) bars. These data and thermal expansion coefficients strongly suggest that the maximum possible tensile strain without fracture of bulk tapes or wires is approximately equals 0.2%. In Ag-clad conductors, residual stresses will be of limited benefit, but fractures produced by larger strains can be accommodated by shunting current through the Ag.
Model for the Vaporization of Mixed Organometallic Compounds in the Metalorganic Chemical Vapor Deposition of High Temperature Superconducting Films
A model of the vaporization and mass transport of mixed organometallics from a single source for thin film metalorganic chemical vapor deposition is presented. A stoichiometric gas phase can be obtained from a mixture of the organometallics in the desired mole ratios, in spite of differences in the volatilities of the individual compounds. Proper film composition and growth rates are obtained by controlling the velocity of a carriage containing the organometallics through the heating zone of a vaporizer.
YBCO/Metal Oxide/YBCO Edge-Geometry Josephson Device with Equitaxial Insulator Overlayers for High-Temperature Superconductive Electronics
Explore the source record for details and available documents.