Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high explosive experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Study of the ${{^{25}}}$Mg(d,p)${{^{26}}}$Mg reaction to constrain the ${{^{25}}}$Al(p,${\gamma }$)${{^{26}}}$Si resonant reaction rates in nova burning conditions

The rate of the 25 Al( p,γ) 26 Si reaction is one of the few key remaining nuclear uncertainties required for predicting the production of the cosmic γ-ray emitter 26 Al in explosive burning in novae. This reaction rate is dominated by three key resonances (J π = 0 + , 1 + and 3 + ) in 26 Si. Only the 3 + resonance strength has been directly constrained by experiment. A high resolution measurement of the 25 Mg(d, p) reaction was used to determine spectroscopic factors for analog states in the mirror nucleus, 26 Mg. A first spectroscopic factor value is reported for the 0 + state at 6.256 MeV, and a strict upper limit is set on the value for the 1 + state at 5.691 MeV, that is incompatible with an earlier ( 4 He, 3 He) study. These results are used to estimate proton partial widths, and resonance strengths of analog states in 26 Si contributing to the 25 Al( p,γ) 26 Si reaction rate in nova burning conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Exploring the Effects of Emplacement Conditions on Explosion P/S Ratios across Local to Regional Distances

High-frequency (~> 2 Hz) seismic P/S amplitude ratios are well-established as a discriminant to distinguish between natural earthquakes and underground explosions at regional distances (~200–1500 km). As research shifts toward identifying lower-yield events, work has begun to investigate the potential of this discriminant for use at local distances (<200 km), in which initial results raise questions about its effectiveness. Here, we utilize data from several chemical explosion experiment series at the Nevada National Security Site in southern Nevada in the United States to study explosion Pg/Lg ratios across the range of local to regional distances. Additionall, the experiments are conducted over differing emplacement conditions, with contrasting geologies and a variety of yields and depths of burial, including surface explosions. We first establish the similarities of Pg/Lg ratios from chemical explosions to those from historic nuclear tests and conclude that, as previous data have suggested, chemical explosion ratios are good proxies for nuclear tests. We then examine Pg/Lg ratios from the new experiment series as functions of distance, yield, depth of burial, and scaled depth of burial (SDOB). At far-local and regional distances, we observe consistently higher ratios from hard-rock explosions compared to ones in a weaker dry alluvium medium, consistent with prior regional distance results. No other trends with yield, depth of burial, or SDOB are strongly evident. Scatter in the observed ratios is very high, particularly at the shortest event-to-station distances, suggesting that small-scale path effects play a significant role. On average, the local distance explosion Pg/Lg ratios show remarkable consistency across all the variations in emplacement. Explosion source models will need to reproduce these results.

58 GEOSCIENCES↗

Primary $\gamma$-ray intensities and $\gamma$-strength functions from discrete two-step $\gamma$-ray cascades in radiative proton-capture experiments

Background: Reaction rates of radiative capture reactions can play a crucial role in the nucleosynthesis of heavy nuclei in explosive stellar environments. These reaction rates depend strongly on $\gamma$-ray decay widths in the reaction products, which are, for nonresonant capture reactions at high excitation energies, derived from the $\gamma$-ray strength function and the nuclear level density. Recently, the ratio method was applied to primary $\gamma$ rays observed from ($\textit{d, p}$) reactions and nuclear resonance fluorescence measurements to extract the dipole strength in atomic nuclei and to test the generalized Brink-Axel hypothesis. Purpose: The purpose of this work is to apply the ratio method to primary $\gamma$-ray intensities of the 63,65 Cu($\textit{p},\gamma$) reactions to extract $\gamma$-ray strength information on the nuclei 64,66 Zn. Here, the impact of spin distribution, total $\gamma$-ray decay widths, level densities, and width fluctuations on the application of the ratio method will be discussed. Additionally, by comparing the relative $\gamma$-ray strength at different excitation energies, conclusions on the validity of the generalized Brink-Axel hypothesis can be made. Method: The radiative proton capture reaction measurements have been performed at the HORUS $\gamma$-ray spectrometer of the University of Cologne at one excitation energy for each reaction. Primary $\gamma$-ray intensities have been determined by normalizing secondary $\gamma$-ray transitions in two-step cascades using their absolute branching ratio. The ratio method was applied to the measured primary $\gamma$-ray intensities as well as to previous measurements by Erlandsson et al. at different excitation energies. Results: The relative strength function curve for 64 Zn from our measurement shows no significant deviation from the previous measurement at a different excitation energy. The same is true for 66 Zn where both measurements were at almost the same excitation energy. Absolute $\gamma$-strength function values have been obtained by normalizing the relative curves to quasiparticle random phase approximation calculations because of the absence of experimental data in the respective energy region. Conclusion: The generalized Brink-Axel hypothesis, i.e., the independence of the strength function on the excitation energy, seems to hold in the studied energy region and nuclei. The method to obtain primary $\gamma$-ray intensities from two-step cascade spectra was shown to be a valuable and sensitive tool although its uncertainties are connected to the knowledge of the low-energy level scheme of the investigated nucleus. The scaling in the ratio method should be taken with care, because the relative strength is not a simple sum of $f_{E1}$ and $f_{M1}$ but a somewhat complex linear combination dependent on the excitation energy of the nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Contrasting Chemical Kinetic Parameters for Near In‐Service‐Temperature Aging and High‐Temperature Thermal Decomposition of Triaminotrinitrobenzene Formulations

Triaminotrinitrobenzene-based high explosives such as LX-17 offer high energy density and exceptional safety, yet their long-term aging behavior at low temperatures remains poorly understood. In this study, several legacy and new production lots of LX-17 were subjected to accelerated aging experiments below 100°C, during which the formation rate of the initial degradation product, monofurazan (F1), was monitored. Kinetic analysis was performed using a sample-age-aware computational approach, yielding activation energy estimates of 82–91 kJ mol −1 for the low-temperature initiation step—markedly lower than the ∼200 kJ mol −1 associated with high-temperature thermal decomposition. Extrapolation from established cookoff models supports the conclusion that the dominant degradation mechanism at low temperatures differs from that at high temperatures. In conclusion, our results provide a unified kinetic framework that bridges the gap between in-service conditions and high-temperature damage.

Chemistry - Chemical explosives↗

Shock Response of Polymethyl Methacrylate (PMMA) Under Explosive Loading

Abstract The dynamic response of polymethyl methacrylate (PMMA) is well understood for one-dimensional planar impact shocks, but limited research has been performed on the response of PMMA under spherical shock loading. In this work, the shock decay of an explosively-driven shock wave into PMMA was experimentally measured. PMMA cubes of various geometries were explosively loaded with an RP-80 detonator to produce the explosive shock wave. High-speed schlieren imaging was implemented to measure the explosively-driven shock wave velocity throughout the PMMA cubes. Photon Doppler velocimetry (PDV) was used to measure the particle velocity imparted by the shock wave at the surface of the cubes. The material shock response was studied at distances from 21.91 to 133.3 mm from the explosive source. The particle velocity history measured by PDV was compared to the wave profile visualized in the high-speed images. The shock wave pulse amplitude decreased with increased distance from the source. The conducted experiments extend the PMMA shock Hugoniot relating to the lower shock and particle velocity regime.

Torres, S. M. (ORCID:0009000287177206)↗

Calibration and uncertainty quantification for Davis Equation of State models for the High Explosive PBX 9501 products

Abstract This paper investigates the uncertainty in the parameters used in the calibration of an Davis Equation Of State (EOS) for the detonation products of the High Explosive PBX 9501. The procedure sought to make use of all available information about this HE to inform the best set of calibration parameters as well as the uncertainty in these parameters. The procedure made use of historical experimental data, the results from thermo‐chemical modeling as well as data on the best isentrope function fit to cylinder test experimental data. Combining all these heterogeneous data sources together in a Bayesian calibration, yielded a posterior mean and covariance. Sampling from the posterior distribution and evaluating an important Quantity Of Interest (QOI) in the EOS model, the detonation speed of a one‐inch rate stick, produced a distribution which showed variations which were in agreement with experiments. The uncertainty in the EOS was reported as eleven sets of model calibrations which spanned the range of this QOI.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Phase Contrast X‐Ray Imaging of the Collapse of an Engineered Void in Single‐Crystal HMX

Abstract Imaging the collapse of a single void that creates a hot spot initiation site in an otherwise defect‐free explosive is challenging given the spatial and temporal scales involved in explosive systems. This work presents our attempt to examine a single hot spot mode (void collapse) in single‐crystal octahydro‐l,3,5,7‐tetranitro‐l,3,5,7‐tetrazocine (HMX) embedded in Sylgard. The hot spot heating mechanisms involved with pore collapse include adiabatic heating, jetting, and viscoplastic dissipation. Quantifying the dynamics of a pore collapse is a crucial step to understanding which mechanisms dominate during ignition events. Our experiments were conducted with a single‐stage, light‐gas gun at Argonne National Laboratory's Advanced Photon Source, applying the phase contrast imaging technique while collecting high‐speed video. The details of HMX single crystal production, defect (pore) engineering, and sample construction, along with experimental results are presented here. These results demonstrate that detailed collapse dynamics can be obtained from homogeneous, single‐crystal explosives with this approach. Qualitative comparisons are made with simulation data which show good agreement in the transition between a quasi‐symmetric pore collapse and an asymmetric collapse with jetting across the pore as measured with normalized pore area and pore circularity.

42 ENGINEERING↗

Physics Flash Fall 2020

The Fall 2020 edition of Physics Flash includes article briefs on: Patrick Younk, Fusing concepts, technology to past performance of nuclear explosives; LANL inertial confinement fusion programs aims to develop burning plasma for weapons science; Lab's high energy nuclear physics explored at international conference; and, Novel study reveals new details on the impact of thermal interfaces in dynamic compression experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of Void Morphology on Detonation Initiation of PBX 9502

Accurate predictive modeling of high explosives in abnormal conditions, such as a fire, is critical to personnel safety. Modeling depends heavily on precise physical characterization of the high explosive in question. The aim of this thesis was to characterize the detonation response to shock and the microstructure at high-temperature (250°C) of PBX 9502 and use these data to attempt to model these results using a new reactive burn model called SURF (Scaled Uniform Reactive Front). In order to characterize the shock response of PBX 9502 at high-temperature a 1D gas gun experiment was designed and executed that provided shock to detonation transition data. These data were then used to do a preliminary calibration of SURF for PBX 9502 at 250°C. Small-angle neutron scattering (SANS) was employed to characterize the void morphology of PBX 9502 as a function of temperature. This was done in order to feed a modified version of SURF called physically informed - SURF (π-SURF) which uses the void size and quantity distribution data as measured by SANS along with the deflagration and detonation characteristics of a high explosive to inform the SURF model. The π-SURF model was then used to model both ambient and high-temperature PBX 9502 SDT response and the results were compared to the physically measured results. It was found that π-SURF works in ambient cases. At high-temperature, however, it was determined that not enough information is known about hot spot formation to use the π-SURF model for high-temperature scenarios.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Explosively driven Richtmyer–Meshkov instability jet suppression and enhancement via coupling machine learning and additive manufacturing

The ability to control the behavior of fluid instabilities at material interfaces, such as the shock-driven Richtmyer–Meshkov instability, is a grand technological challenge with a broad number of applications ranging from inertial confinement fusion experiments to explosively driven shaped charges. In this work, we use a linear-geometry shaped charge as a means of studying methods for controlling material jetting that results from the Richtmyer–Meshkov instability. A shaped charge produces a high-velocity jet by focusing the energy from the detonation of high explosives. The interaction of the resulting detonation wave with a hollowed cavity lined with a thin metal layer produces the unstable jetting effect. By modifying the characteristics of the detonation wave prior to striking the lined cavity, the kinetic energy of the jet can be enhanced or reduced. Modifying the geometry of the liner material can also be used to alter jetting properties. We apply optimization methods to investigate several design parameterizations for both enhancing or suppressing the shaped-charge jet. This is accomplished using 2D and 3D hydrodynamic simulations to investigate the design space that we consider. We also apply new additive manufacturing methods for producing the shaped-charge assemblies, which allow for the experimental testing of complicated design geometries obtained through computational optimization. We present a direct comparison of our optimized designs with experimental results carried out at the High Explosives Application Facility at Lawrence Livermore National Laboratory.

36 MATERIALS SCIENCE↗

Parallel IO Libraries for Managing HEP Experimental Data

The computing and storage requirements of the energy and intensity frontiers will grow significantly during the Run 4 & 5 and the HL-LHC era. Similarly, in the intensity frontier, with larger trig ger readouts during supernovae explosions, the Deep Underground Neutrino Experiment (DUNE) will have unique computing challenges that could be addressed by the use of parallel and accelerated dataprocessing capabilities. Most of the requirements of the energy and intensity frontier experiments rely on increasing the role of high performance computing (HPC) in the HEP community. In this presentation, we will describe our ongoing efforts that are focused on using HPC resources for the next generation HEP experiments. The HEPCCE (High Energy Physics-Center for Computational Excellence) IOS (Input/Output and Storage) group has been developing approaches to map HEP data to the HDF5 , an IO library optimized for the HPC platforms to store the intermediate HEP data. The complex HEP data products are serialized using ROOT to allow for experiment independent general mapping approaches of the HEP data to the HDF5 format. The mapping approaches can be optimized for high performance parallel IO. Similarly, simpler data can be directly mapped into the HDF5, which can also be suitable for offloading into the GPUs directly. We will present our works on both complex and simple data model models.

Bashyal, Amit↗

A Continuous Galactic Line Source of Axions: The Remarkable Case of 23 Na

Here, we argue that $^{23}$Na is a potentially significant source of galactic axions. For temperatures $\gtrsim 7 \times 10^8$K -- characteristic of carbon burning in the massive progenitors of supernovae and ONeMg white dwarfs -- the 440 keV first excited state of $^{23}$Na is thermally populated, with its repeated decays pumping stellar energy into escaping axions. Odd-A nuclear abundances are typically very low in high-temperature stellar environments (or absent entirely due to burn-up). $^{23}$Na is an exception: $\approx 0.1 M_\odot$ of the isotope is synthesized during carbon burning then maintained at $\approx 10^9$K for times ranging up to $6 \times 10^4$y. Using MESA simulations, a galactic model, and sampling over progenitor masses, locations, and evolutionary stages, we find a continuous flux at earth of $\langle ϕ_a \rangle \approx 22$/cm$^2$s for $g^\mathrm{eff}_{aNN} = 10^{-9}$. Some fraction of these axions convert to photons as they propagate through the galactic magnetic field, producing a distinctive 440 keV line $γ$ ray detectable by all-sky detectors like the Compton Spectrometer and Imager (COSI). Assuming a 1$μ$G galactic magnetic field and a sufficiently light axion mass, we find that COSI will be able to probe $| g_{aNN}^\mathrm{eff} g_{a γγ} | \gtrsim1.8 \times 10^{-22}$ GeV$^{-1}$ at $3σ$ after two years of surveying.

Dark matter↗

Composite binder, processing, and particle size effects on mechanical properties of non-hazardous high explosive surrogates

Plastic-bonded explosives (PBX) are polymer matrix composites that are highly loaded with micron-scale explosive crystals. The thermal and mechanical properties of these materials must be well-understood so that appropriate engineering models can be developed, but testing such properties under many scenarios can be hazardous and expensive. A non-hazardous PBX surrogate (“mock”) may be used in place of a PBX in many experiments if the thermomechanical properties are well-matched. Our previous research has shown that 5-iodo-2'-deoxyuridine (IDOX) is a promising crystalline filler material for the explosive cyclotetramethylene-tetranitramine (HMX). In this study, we investigate how the binder composition, variations in the IDOX particle size distribution, and pressing temperature affect the compressive strength and elastic modulus. We observe that while the binder system used in the composite dominates the mechanical response, the particle size distribution and pressing conditions do have a measurable effect on the material compliance and strength.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Biologically inspired reinforcement using polydopamine of polymer bound composites

Interfacial strength plays a critical role in the mechanical properties of a composite system. In this work, a proven mock high explosive (HE), 5-iodo-2’-deoxyuridine (IDOX) was coated by the adhesive promoting polymer polydopamine (PDA), then formulated with an Estane binder system to form an improved HE mock composite. An extensive comparison study of mechanical properties was performed to determine the effects, if any, of PDA on the composite system. To aid in interpretation of the mechanical test data, neutron reflectometry experiments were performed to determine the thickness and structure of the as deposited PDA films. The mechanical performance of PDA-treated IDOX was then compared to untreated specimens by compression testing in the Brazilian disk geometry. The results strongly suggested that the structure of PDA consists of two layers: one low in density caused by polymer agglomerates attaching to the substrate during polymerization, and the second high in density caused by controlled linear deposition of polydopamine. Finally, the mechanical testing showed that PDA greatly increased the stiffness and yield strength of IDOX based mocks without causing any disruption to the underlying crystal system.

42 ENGINEERING↗

Fluid dynamic mathematical aspects of supernova remnants

Supernovae—explosions of stars—are a central problem in astrophysics since they contain information on the entire process of stellar evolution and nucleosynthesis. Rayleigh–Taylor (RT) and Richtmyer–Meshkov (RM) instabilities, developing during the supernova blast, lead to intense interfacial RT/RM mixing of the star's materials and couple astrophysical to atomic scales. This work analyzes some fluid dynamic mathematical aspects of the titanic task of supernova's blast. We handle mathematical challenges of RT/RM dynamics in supernova relevant conditions by directly linking the conservation laws governing RT/RM dynamics to symmetry-based momentum model, by exactly deriving the model parameters in the scale-dependent and scale-invariant regimes, and by exploring the special self-similar class for RT/RM interfacial mixing with variable accelerations. Here we reveal that RT/RM dynamics is strongly influenced by deterministic (the initial and the flow) conditions in the scale-dependent linear and nonlinear regimes and in the self-similar mixing regime. The theory outcomes are consistent with the observations of supernova remnants, explain the results of the scaled laboratory experiments in high energy density plasmas, and yield the design of future experiments for the accurate quantification of RT/RM dynamics in supernova relevant conditions. We find that from fluid dynamic mathematical perspectives, supernovae can be regarded as an astrophysical initial value problem. Along with the guidance of what explodes at microscopic scales, supernova remnants encapsulate information on the explosion hydrodynamics and the associated deterministic conditions at macroscopic scales. We urge such effects be considered in interpretations of the observational data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Seeding the explosion of a high-current-density conductor in a controlled manner through the addition of micron-scale surface defects

Inhomogeneities in a current-carrying conductor promote non-uniform heating and expansion through the complex feedback between current density, electrical resistivity, Ohmic heating, temperature, and hydrodynamics. Three-dimensional-magnetohydrodynamic (3D-MHD) simulations suggest that μm-scale resistive inclusions or voids seed local overheating and through hydrodynamic explosion generate continuously growing craters which become several times larger than the initial perturbation. The ejected mass is the genesis of an electrothermally driven plasma filament which develops at lower current than plasmas on uniform surfaces adjacent to the defect. This result suggests that 1D or even 2D treatments are largely inadequate for detailed prediction of plasma formation. To test computational predictions, z-pinch experiments driven to 1 MA studied ultra-high-purity aluminum rods which were then machined to include pairs of quasi-hemispherical voids or “engineered defects (ED)” on the current-carrying surface. ED are the dominant current-density perturbation and reproducibly drive local overheating which can be compared with 3D-MHD simulation. Data from high-resolution-gated imagers of visible surface emissions confirm many simulation predictions, including the surface topography of local overheating, and the propensity for neighboring ED to prematurely source plasmas which then connect to form a plasma filament. Results also provide conditional support of theory which suggests heating similarity; that is, heating is independent of ED size for geometrically scaled ED.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Validation of Reactive Flow Capabilities in PAGOSA

Several reactive flow modeling capabilities are studied and applied to physics problems of interest in the PAGOSA hydrocode with an emphasis on validation. The Davis equation of state and the Arrhenius shock temperature dependent WSD (AWSD) reactive flow model have been implemented by the author in PAGOSA over the last year. These high-explosive modeling options along with the previously existing HE-JWL equation of state and the SURF/SURFplus reactive flow models are discussed, exercised and compared. Validation of the models analyze numerical results against experimental data from cylinder tests, two-stage gas gun experiments and proton radiography (pRad) experiments. Applications of the modeling options are explored involving both HMX based PBX 9501 and TATB based PBX 9502. The effect of mesh size is considered for prediction of phenomena such as corner turning and dead zones, and the relative code performance of the modeling options is discussed.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗