Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heterodyne”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Linewidth measurements of tunable diode lasers using heterodyne and etalon techniques

Measurements of the linewidths of Pb-salt diode lasers operating in the 8- and 9-micron region are reported. The linewidths of the 9-micron lasers were determined by conventional heterodyne techniques, while for the 8-micron lasers a new technique based on a Fabry-Perot etalon was used. The new technique avoids the complexity and limited wavelength range of the heterodyne measurements and can be used for any tunable laser. The linewidths observed varied from 0.6 to more than 500-MHz FWHM. The linewidth was found to vary dramatically from device to device, to depend strongly on junction temperature and injection current, and to be correlated with vibrations caused by operation of a closed-cycle refrigerator.

Reid, J.↗

Bulk and integrated acousto-optic spectrometers for molecular astronomy with heterodyne spectrometers

A survey of acousto-optic spectrometers for molecular astronomy is presented, noting a technique of combining the acoustic bending of a collimated coherent light beam with a Bragg cell followed by an array of sensitive photodetectors. This acousto-optic spectrometer has a large bandwidth, a large number of channels, high resolution, and is energy efficient. Receiver development has concentrated on high-frequency heterodyne systems for the study of the chemical composition of the interstellar medium. RF spectrometers employing acousto-optic diffraction cells are described. Acousto-optic techniques have been suggested for applications to electronic warfare, electronic countermeasures and electronic support systems. Plans to use integrated optics for the further miniaturization of acousto-optic spectrometers are described. Bulk acousto-optic spectrometers with 300 MHz and 1 GHz bandwidths are being developed for use in the back-end of high-frequency heterodyne receivers for astronomical research.

Chin, G.↗

Spectral line inversion for sounding of stratospheric minor constituents by infrared heterodyne technique from balloon altitudes

A combination of two different techniques for the inversion of infrared laser heterodyne measurements of tenuous gases in the stratosphere by solar occulation is presented which incorporates the advantages of each technique. An experimental approach and inversion technique are developed which optimize the retrieval of concentration profiles by incorporating the onion peel collection scheme into the spectral inversion technique. A description of an infrared heterodyne spectrometer and the mode of observations for solar occulation measurement is presented, and the results of inversions of some synthetic ClO spectral lines corresponding to solar occulation limb-scans of the stratosphere are examined. A comparison between the new techniques and one of the current techniques indicates that considerable improvement in the accuracy of the retrieved profiles can be achieved. It is found that noise affects the accuracy of both techniques but not in a straightforward manner since there is interaction between the noise level, noise propagation through inversion, and the number of scans leading to an optimum retrieval.

Abbas, M. M.↗

Theory and status of high performance heterodyne detectors

Both near-ideal heterodyne performance and an enhancement of CO2 laser heterodyne system capabilities have been obtained by means of recently developed wide-bandwidth HgCdTe photodiodes and photoconductors. Design considerations, including limitations due to various HgCdTe material parameters, performance predictions, and the current development status of wide bandwidth HgCdTe photodiodes are presented. Attention is also given to the uses and recent results obtained for p-type HgCdTe photoconductors in the role of elevated temperature photomixers.

Spears, D. L.↗

Infrared heterodyne spectroscopy of seven gases in the vicinity of chlorine monoxide lines

Chlorine monoxide (ClO) is thought to play an important role in a photochemical cycle which causes the destruction of ozone in the earth's stratosphere. Since lines of the (1,0) fundamental of ClO lie near C-14O2-16, laser lines, IR heterodyne spectroscopy is potentially an important technique for monitoring the ClO abundance. However, due to the presence of lines from other trace atmospheric gases in this spectral range, the interpretation of such observations is ambiguous unless high resolution laboratory measurements support the identifications. Measured frequencies are reported for spectral lines of seven trace atmospheric gases which absorb near the C-14O2-16 laser transitions relevant to the detection of ClO by IR heterodyne spectroscopy.

Weaver, H. A.↗

Tunable laser heterodyne spectrometer measurements of atmospheric species

It is pointed out that spectroscopic measurements conducted with the aid of tunable laser heterodyne spectrometers in the 3-30 micron range of the electromagnetic spectrum have the potential to measure the vertical profiles of tenuous gas molecules in the atmosphere with ultra high spectral resolution and great sensitivity. Programs related to the realization of this potential have been conducted for some time, and a Laser Heterodyne Spectrometer (LHS) experiment was developed. The present investigation has the objective to provide an overview of the LHS concept for measuring the vertical profiles of tenuous gas molecules in the upper atmosphere from space and airborne platforms, and to discuss the sensitivity ranges for this technique.

Allario, F.↗

Moire deflectometry with deferred electronic heterodyne readout

The electronic heterodyne technique is applied to the task of deferred readout of phase objects' moire fringes. In combination with the heterodyne readout technique, moire deflectometry constitutes a powerful tool for the study of phase objects, exhibiting high sensitivity, ease of automation and recording, low cost, use of incoherent illumination, and independence from fringe contrast variations.

Stricker, J.↗

Optical astronomical interferometry - Requirements on stellar Michelson interferometry and heterodyne interferometry for high-resolution imaging

The requirements for optical path compensation on space-based (no atmospheric-induced disturbance) heterodyne interferometers and generalized Michelson stellar interferometers are developed. It is demonstrated that heterodyne interferometers require optical path compensation to well within the coherence length dictated by its bandwidth, while Michelson stellar interferometers require compensation to a fraction of their utilized wavelength.

Silverglate, P. R.↗

Development of a P-I-N HgCdTe photomixer for laser heterodyne spectrometry

An improved HgCdTe photomixer technology was demonstrated employing a p-i-n photodiode structure. The i-region was near intrinsic n-type HgCdTe; the n-region was formed by B+ ion implantation; and the p-region was formed either by a shallow Au diffusion or by a Pt Schottky barrier. Experimental devices in a back-side illuminated mesa diode configuration were fabricated, tested, and delivered. The best photomixer was packaged in a 24-hour LN2 dewar along with a cooled GaAs FET preamplifier. Testing was performed by mixing black-body radiation with a CO2 laser beam and measuring the IF signal, noise, and signal-to-noise ratio in the GHz frequency range. Signal bandwidth for this photomixer was 1.3 GHz. The heterodyne NEP was 4.4 x 10 to the -20 W/Hz out to 1 GHz increasing to 8.6 x 10 to the -10 W/Hz at 2 GHz. Other photomixers delivered on this program had heterodyne NEPs at 1 GHz ranging from 8 x 10 to the -20 to 4.4 x 10 to the -19 W/Hz and NEP bandwidths from 2 to 4 GHz.

Bratt, Peter R.↗

An optical heterodyne densitometer

Researchers are developing an optical heterodyne densitometer with the potential to measure optical density over an unprecedented dynamic range with high accuracy and sensitivity. This device uses a Mach-Zender interferometer configuration with heterodyne detection to make direct comparisons between optical and RF attenuators. Researchers expect to attain measurements of filter transmittance down to 10 to the minus 12th power with better than 1 percent uncertainty. In addition, they intend to extend the technique to the problem of measuring low levels of light scattering from reflective and transmissive optics.

Migdall, A. L.↗

Error sources in deferred heterodyne moire deflectometry - An analytical study

The effects of the aperture size and shape of the photodetector and of the structure of the grating lines on the performance of deferred electronic heterodyne moire deflectometry are studied. It is shown that scanning of a moire fringe pattern parallel to an unshifted fringe yields periodical variations in the heterodyne phase and amplitude, which cause severe errors in the measurements.

Stricker, Josef↗

Performance analysis of a noncoherently combined large aperture optical heterodyne receiver

The performance of a noncoherently combined (NC) multiple-mirror heterodyne receiver is analyzed. With no atmospheric turbulence (AT), the performance of the NC receiver is shown to the inferior to that of a monolithic diffraction-limited receiver with equivalent aperture area. When AT is taken into consideration, however, the efficiency of a monolithic receiver is limited by the phase coherence length of the atmosphere, and generally does not improve with increasing aperture size. In contrast, the performance of an NC system improves with an increasing number of receivers. Consequently, given a fixed collecting area, the NC system can offer superior performance. The performance of the NC heterodyne receiver is studied by analyzing the combining loss of the receiver SNR. It is shown that, given a constant collecting area, the performance of the NC receiver is optimized when the diameter of each of the individual receivers is on the order of the phase coherence length of the AT.

Chen, Chien-Chung↗

A comparison of Ultra-Sensitive Coherent Detection (USCD) and heterodyne detection for a wind sensing application

Ultra-Sensitive Coherent Detection (USCT) and conventional heterodyne detection methods were evaluated for use as a space-borne wind sensing system. For this study, we assume that the wind sensing system would be available by the year 2015. Consequently, laser systems and detectors more advanced than those under consideration for near term programs could be included. Three laser candidates under evaluation are Nd-YAG at 1.06 microns, Ho-YAG at 2.1 microns, and CO2 at 9.11 microns. Both heterodyne and USCD detection methods were included. The primary stress is on the optimization of weight and power consumption of the wind sensor portion of the satellite system.

Amimoto, Sherwin↗

Coherent summation of spatially distorted laser Doppler signals by using a two-dimensional heterodyne detector array

Phase-sensitive coherent summation of individual heterodyne detector array signals was demonstrated for the enhanced detection of spatially distorted laser Doppler returns. With the use of a 2 x 2 heterodyne detector array, the phase and amplitude of a time-varying speckle pattern was detected, and the signal-to-noise ratio of the Doppler shift estimate was shown to be improved by a factor of 2, depending on the extent of spatial coherence loss. These results are shown to agree with a first-order analysis and indicate the advantage of coherent summation for both short-range laser Doppler velocimetry and long-range atmospheric coherent lidar.

Chan, Kin P.↗

Measurements of the single sideband suppression for a 650 GHz heterodyne receiver

A large number of atmospheric trace gases, involved in the process of stratospheric ozone depletion, show emission features in the submillimeter wavelength range (lambda = 0.1-1mm). High-resolution heterodyne techniques are a particularly useful tool in this spectral region as vertical distribution of these species can be deduced. Here the receiver has to be operated in the single sideband (ssb) mode preferably to avoid any interferences between the contributions in both receiver sidebands. In the 625-655 GHz heterodyne receiver developed at the University of Bremen a Martin-Puplett interferometer is used as a ssb-filter. A laboratory set-up has been built up to measure the performance of this interferometer.

Crewell, S.↗

Optically pumped submillimeter laser heterodyne receivers - Astrophysical observations and recent technical developments

NASA's prospective sub-mm-wave astrophysical missions encompass the Small Explorer Submillimeter Wave Astronomy Satellite, scheduled for launch in 1995, the Submillimeter Intermediate Mission, and the Large Deployable Reflector; until these are operational, sub-mm observations will be conducted at mountain sites and aboard aircraft platforms. Attention is presently given to the technical challenges faced by terahertz-range receiver developers, and it is noted that optically pumped sub-mm lasers furnish the only practical local oscillation source for heterodyne receivers in the 600-3000 GHz range. An account is given of ground-based and airborne astrophysical applications of heterodyne receivers.

Chin, Gordon↗

V-groove diffraction grating for use in an FUV spatial heterodyne interferometer

A need has arisen for efficient, blazed, symmetric gratings for use as beam splitters in far and extreme ultraviolet interferometers. In particular, the development of an all-reflection, far ultraviolet spatial heterodyne interferometer can benefit tremendously from such a grating. To fulfill this need, we have manufactured a mechanically ruled grating with a V-groove profile blazed for H Lyman-alpha at 1216 A. We present the grating performance at Lyman-alpha in the context of its application to the spatial heterodyne interferometer.

Cotton, Daniel M.↗

A fiber-coupled heterodyne interferometric displacement sensor

Space-based interferometers and large segmented reflectors will require precision metrology with nanometer accuracy for active control systems. This paper summarizes an experimental study of an optical heterodyne interferometer with resolution of about 3 nm. Optical signals are carried to and from the interferometer by optical fibers to avoid thermally loading the reflector panels. Heterodyne detection provides far greater precision than does traditional interferometry.

Nerheim, Noble↗