Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hemicellulose”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Synergistic cellulase–xylanase formulations for enhanced dewatering and fiber bonding toward energy-efficient and sustainable paper and packaging production

A mechanistic understanding of the synergistic effects of enzymes on cellulosic fibers dewatering and fiber bonding is essential for advancing energy-efficiency and lightweight production of paper and packaging materials. This study investigates the impact of varying cellulase and xylanase formulations on equilibrium moisture content (EMC) after pressing and tensile strength of cellulosic fiber webs using a factorial experimental design. Nine custom enzyme formulations were evaluated at controlled dosages ranging from ∼20 to 76 FPU/mL cellulase and ∼500–1130 IU/mL xylanase. Response surface modeling revealed a significant synergy, particularly at 20–40 FPU/mL cellulase combined with ≥ 1000 IU/mL xylanase. Under these conditions, EMC decreased by up to 3.6% compared with the untreated refined control, while tensile index gains of up to 16% were statistically significant for optimized blends (p < 0.05). The interaction between cellulase and xylanase was also significant for the tensile response (p = 0.010). Protein efficiency analysis showed that optimized formulations containing 30–40% less protein outperformed the commercial benchmark. The nonlinear synergy between cellulase and xylanase is attributed to their complementary substrate specificities. Endoglucanase- and β‑glucosidase‑rich cellulases hydrolyze internal β‑1,4‑glycosidic bonds in amorphous cellulose, loosening fiber walls and increasing flexibility, while xylanases target hemicellulose, primarily xylan-rich domains, enhancing porosity and improve cellulase accessibility. Tailoring enzyme formulations at low loadings overcomes traditional trade-offs between strength and dewatering, enabling cost-effective, energy-efficient, low-carbon solutions for sustainable packaging and hygiene products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Scalable aqueous-phase fabrication of reduced graphene oxide nanofiltration membranes by an integrated roll-to-roll (R2R) process

Economic fractionation of multicomponent biomass-derived streams is a key challenge in biobased fuels and chemicals production. Kraft black liquor (BL) is generated at ~1 billion tons/yr globally from biomass pulping and contains ~15wt% total solids including lignin, hemicellulose fragments, and inorganics. Membrane-based BL concentration is attractive but challenged by low solute rejections and poor stability in BL, which combines alkaline pH (~13), high dissolved solids content (15+ wt%) and high temperature (70–85°C). Here we discuss the scaled fabrication and characterization of reduced graphene oxide (rGO) nanofiltration membranes by slot die coating on a roll-to-roll (R2R) with integrated vacuum filtration. Here, we obtain high-quality 90×30 cm rGO membranes (referred to as “R2R-rGO membranes” in this work) with ~100 nm average thickness supported on porous poly(ethersulfone) (PES) sheets, and an effective area of 2700cm 2 . We present characterizations of their microstructure and uniformity as mapped over large areas by scanning electron microscopy (SEM), ellipsometry, adhesion test and X-ray photoelectron spectroscopy (XPS). The constructed ellipsometry model for the rGO membrane/PES substrate composite was successfully applied to 48 different locations of the R2R-rGO membranes. The R2R-rGO membranes showed >98% lignin rejection with a steady state flux of ~12 LMH at 50bar in a 15.7wt% total solids (TS) kraft BL stream at 72°C and 2–3 gal/min crossflow rates. Slot die coating on a R2R platform with integrated vacuum filtration can enable rapid fabrication of high-quality GO membranes at scale without organic solvents or volatile organic compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Detailed modeling of hydrogen release and particle shrinkage during pyrolysis of inhomogeneous wood

Hydrogen release during pyrolysis of woody biomass is studied considering anisotropicity and inhomogeneity of wood structure. A new anisotropic shrinkage model is proposed based on the decomposition of main wood constituents, i.e., cellulose, hemicellulose, and lignin. The new shrinkage model can predict the temporal evolution of the wood structure, and the differences between axial and radial shrinkage during pyrolysis. The model agrees very well with several experimental data from the literature. Based on particle temperature during conversion, the pyrolysis is partitioned into four stages, and the hydrogen release and H 2 formation from each stage are investigated. Stage (IV) of pyrolysis, from 1000 to 1273 K, is found to be efficient for H 2 production owing to the production of considerable mass of H with a minimal amount of tar species. Furthermore, the char quality is found to be different at the end of stages (II), (III), and (IV), where around 67.7, 80.5, and 93.4% wt. of solid residue is made of carbon, respectively. The model is also used to explain how the heating rate affects the temperature distribution inside the particle and how it shifts the peak of hydrogen release. Finally, the pyrolysis of two inhomogeneous wood samples — a beech twig with bark and a beech dowel with growth rings — are investigated. The bark can affect the pyrolysis rate, products, and flow pattern inside the particle. The growth rings do not have a considerable effect on the pyrolysis rate and products, but they have a significant impact on the flow pattern. This has an important implication for char conversion studies where the internal surface area and porosity field distribution have a significant effect on the gasification and oxidation rates.

09 BIOMASS FUELS↗
DOE OSTI2025

Structure-guided utilization of lignocellulose for catalysis, energy, and biomaterials

As a complex composite of cellulose, hemicellulose, and lignin, plant lignocellulose has long served as a major resource for biomass conversion, materials engineering, and bio-based product development. High-resolution structural insights enabled by solid-state nuclear magnetic resonance (ssNMR) now allow the mapping of polymer interfaces, identification of functional group accessibility, and tracking of molecular organization during processing, all of which are critical factors for optimizing catalytic strategies. These insights could drive transformative progress in lignocellulose-based applications, including selective depolymerization, improved pretreatment design, and efficient upcycling of lignin into resins, plastics, and biomedical materials. In industry-relevant contexts, such as biofuel generation and renewable material manufacturing, understanding the hydration dynamics, cross-linking patterns, and structural heterogeneity is also essential. The ability to visualize these features in native biomass presents a unique opportunity to develop new strategies for sustainability and performance. As the structural toolbox continues to expand, it is becoming a central enabler for innovations in renewable energy, green chemistry, and advanced bioproducts.

bioproduct↗
DOE OSTI2023

Deuterated water as a substrate-agnostic isotope tracer for investigating reversibility and thermodynamics of reactions in central carbon metabolism

Stable isotope tracers are a powerful tool for the quantitative analysis of microbial metabolism, enabling pathway elucidation, metabolic flux quantification, and assessment of reaction and pathway thermodynamics. 13 C and 2 H metabolic flux analysis commonly relies on isotopically labeled carbon substrates, such as glucose. However, the use of 2 H-labeled nutrient substrates faces limitations due to their high cost and limited availability in comparison to 13 C-tracers. Furthermore, isotope tracer studies in industrially relevant bacteria that metabolize complex substrates such as cellulose, hemicellulose, or lignocellulosic biomass, are challenging given the difficulty in obtaining these as isotopically labeled substrates. In this study, we examine the potential of deuterated water ( 2 H 2 O) as an affordable, substrate-neutral isotope tracer for studying central carbon metabolism. We apply 2 H 2 O labeling to investigate the reversibility of glycolytic reactions across three industrially relevant bacterial species -C. thermocellum, Z. mobilis, and E. coli-harboring distinct glycolytic pathways with unique thermodynamics. We demonstrate that 2 H 2 O labeling recapitulates previous reversibility and thermodynamic findings obtained with established 13 C and 2 H labeled nutrient substrates. Furthermore, we exemplify the utility of this 2 H 2 O labeling approach by applying it to high-substrate C. thermocellum fermentations -a setting in which the use of conventional tracers is impractical-thereby identifying the glycolytic enzyme phosphofructokinase as a major bottleneck during high-substrate fermentations and unveiling critical insights that will steer future engineering efforts to enhance ethanol production in this cellulolytic organism. This study demonstrates the utility of deuterated water as a substrate-agnostic isotope tracer for examining flux and reversibility of central carbon metabolic reactions, which yields biological insights comparable to those obtained using costly 2 H-labeled nutrient substrates.

09 BIOMASS FUELS↗
DOE OSTI2025

Rapid High-Resolution Analysis of Polysaccharide-Lignin Interactions in Secondary Plant Cell Walls Using Proton-Detected Solid-State NMR

The plant secondary cell wall, a complex matrix composed of cellulose, hemicellulose, and lignin, is crucial for the mechanical strength and water-proofing properties of plant tissues, and serves as a primary source of biomass for biorenewable energy and biomaterials. Structural analysis of these polymers and their interactions within the secondary cell wall has been heavily relying on 13 C-based solid-state NMR techniques. In this study, we explore the application of 1 H-detected solid-state NMR techniques for rapid, high-resolution structural characterization of polysaccharides and lignin, demonstrated on the stems of hardwood eucalyptus. We explored the use of synthesized 2D spectra to resolve central 1 H resonances and the combined application of 3D hCCH and hCHH experiments for complete resonance assignment and unambiguous identification of lignin-carbohydrate interactions. Our findings emphasize the central role of acetylated three-fold xylan conformers, rather than two-fold, in stabilizing the carbohydrate-lignin interface, with glucuronic acid sidechains in eucalyptus glucuronoxylan colocalizing with lignin, revised cellulose-lignin interactions involving uncoated microfibril surfaces, and pectin-lignin interactions indicative of early-stage lignification. These results present a novel approach for rapid structural analysis of lignocellulosic biomaterials without the need for solubilization or extraction.

09 BIOMASS FUELS↗
DOE OSTI2023

Atomic Level Interactions and Suprastructural Configuration of Plant Cell Wall Polymers in Dialkylimidazolium Ionic Liquids

Ionic liquids (ILs) have been widely investigated for the pretreatment and deconstruction of lignocellulosic feedstocks. However, the modes of interaction between IL-anions and cations, and plant cell wall polymers, namely, cellulose, hemicellulose, and lignin, as well as the resulting ultrastructural changes are still unclear. In this study, we investigated the atomic level and suprastructural interactions of microcrystalline cellulose, birch wood xylan, and organosolv lignin with 1,3-dialkylimidazolium ILs having varying sizes of carboxylate anions. Analysis by 13 C NMR spectroscopy indicated that cellulose and lignin exhibited stronger hydrogen bonding with acetate ions than with formate ions, as evidenced by greater chemical shift changes. Small-angle X-ray scattering analysis showed that while both cellulose and xylan adopted a single-stranded conformation in acetate-ILs, twice as many acetate ions were bound to one anhydroglucose unit than to an anhydroxylose unit. Further, we also determined that a minimum of seven representative carbohydrate units must interact with an anion for that IL to effectively dissolve cellulose or xylan. Lignin is associated as groups of four polymer molecules in formate-ILs and dispersed as single molecules in acetate-ILs, which indicates that it is highly soluble in the latter. In summary, our study demonstrated that 1,3-dialkylimidazolium acetates displayed stronger binding interactions with cellulose and lignin, as compared to formates, and thus have superior potential to fractionate these polymers from lignocellulosic feedstocks.

13C NMR↗
DOE OSTI2020

Novel Strategy To Analyze Fourier Transform Ion Cyclotron Resonance Mass Spectrometry Data of Biomass Pyrolysis Oil for Oligomeric Structure Assignment

Among the most prominent challenges for the analysis of biomass pyrolysis products is the characterization of the abundant oligomer fraction of bio-oil. This fraction is principally made up of pyrolytic lignins and dehydrated, highly modified sugar oligomers, called humins, in liquid phase. An emerging technique for analysis of this oligomer fraction is high-resolution Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR MS), which allows for accurate determination of C x H y O z formulae for detected oligomers. Additionally, using simple dehydration and fragmentation reaction schemes, similar formulae can be developed from cellulose-, hemicellulose- and lignin-derived oligomers, which are primary depolymerization products. In this paper, FT-ICR MS analysis is coupled with combinatoric dehydration and fragmentation modeling in order to match experimentally detected bio-oil oligomers with hypothetical pathways for their formation during pyrolysis. In this way, we present a novel strategy by which oligomeric structures can be proposed for bio-oils. Using this approach, it becomes possible to advance the understanding of both the molecular structures comprising the bio-oil oligomer fraction and the pathways by which these structures form during biomass pyrolysis reactions.

09 BIOMASS FUELS↗
DOE OSTI2020

Eudicot Nutshells: Cell-Wall Composition and Biofuel Feedstock Potential

Nutshells are the recalcitrant and membranous layers that encompass and provide protection to the seed of a fruit. Rich in lignin, these are often waste products of the food industry and are a potential energy-dense feedstock for biorefineries to convert to biofuels. Here, assessing their potential requires an understanding of the relative amounts of cellulose, hemicelluloses, and lignin, the composition and structure of the lignin, and a saccharifiability assessment, all provided here. In the context of understanding the general character of phylogenetically diverse eudicot species, we provide a chemical analysis of the lignin in the shells of commonly eaten nuts and detail the chemical composition of their lignins. Particularly striking observations include the >40% levels of Klason lignins in the nutshells from macadamia, pecan, and Brazil nut and lignin compositions ranging from <1% syringyl (S) in macadamia to 77% S in pistachio and essentially 0% p-hydroxyphenyl (H) in mango to as high as 7.5% H in walnut. Novel units in the lignin polymer (such as the hydroxystilbenes recently discovered in macaúba and coconut shell lignins) were not evident in any of the samples, but the series provided such a range of compositions that it aided more detailed assignment.

NMR↗
DOE OSTI2023

Comparison of the Chemical Composition of Liquids from the Pyrolysis and Hydrothermal Liquefaction of Lignocellulosic Materials

Major differences in thermal stability and hydrotreatment behavior of HTL and pyrolysis oils have been reported in the literature. However, little is known about the variations in the chemical composition of these oils that could explain such differences. Two commercial wood pyrolysis oils (Pyrovac and BTG), and their water-soluble (WS) and water-insoluble fractions (WIS) were analyzed and compared with the aqueous (WS WD-57 ) and oily (WIS WS-57 ) fractions obtained from hydrothermal liquefaction (HTL) of Douglas-fir. The samples were characterized by GC/MS, Karl Fischer titration, carbonyl content, total acid number, elemental composition, calorific value, proximate analysis, Fourier Transform Infrared Spectroscopy (FTIR), Folin-Ciocalteu (FC), and UV fluorescence. All the fractions were also analyzed by Fourier Transform Ion Cyclotron Resonance Mass Spectroscopy (FT-ICR-MS) and by Electrospray Ionization (EI). The most prevalent class of compounds in the water insoluble phases were phenols derived from lignin. Water-soluble phases contain mostly the oxygenated compounds derived from cellulose and hemicellulose and were richer in carbonyl functional groups. The water content of the resulting aqueous phases were between: 65 (WS BTG ) and 96 (WS Pyrovac ) wt. %. The bio-oil from BTG has higher water content and lower HHV, compared to Pyrovac oil. The GC/MS results of BTG oil show the presence of a more prominent acetic acid peak and higher TAN number than the Pyrovac oil. The GC/MS of Pyrovac oil showed more obvious mono-phenol peaks. The quantification of this family by Folin-Ciocalteu method confirmed higher content of monophenolic compounds compared with the BTG oil. The lower thermal stability of pyrolysis oils compared with HTL biocrudes can be partially explained by the fact that pyrolysis oils (BTG and Pyrovac) contain carbohydrates while HTL biocrude (WIS WD-57 ) doesn’t. Thus, we decided to further investigate the chemical differences between the phenolic rich fractions insoluble in water and the holocellulose derived compounds soluble in water. Even after water extraction, the acid content of the water insoluble fraction from BTG (WISBTG) was higher than the acid content of the water insoluble fraction obtained by HTL (WISWSD-57). Likewise, the acid content of the aqueous phases derived from pyrolysis oils (WS Pyrovac , WS BTG ) was also higher than for the aqueous phase obtained by HTL (WSWSD-57). This result is in part due to the use of bases in the HTL process that neutralizes the acid formed in that process. Moreover, the starting feedstock may also influence the differences between the oils. Although, the UV-Fluorescence spectra, ICR-MS and the EI analyses showed some minor differences in the molecular weight and chemical make-up of the oligomers soluble and insoluble in water from pyrolysis and HTL; the differences observed were not large enough to justify the differences in behavior between these oils reported in the literature. Our results suggest that the differences observed between HTL biocrudes and pyrolysis oils are likely partially due to the presence of holocellulose derived products in the pyrolysis oils and higher acid contents.

09 BIOMASS FUELS↗
DOE OSTI2020

Direct Conversion of Biomass Carbohydrates to Platform Chemicals: 5-Hydroxymethylfurfural (HMF) and Furfural

5-hydroxymethylfurfural (HMF) and furfural are promising platform molecules which can be converted to fuel intermediates and hydrocarbon fuels. Herein, one-step, direct conversion of the carbohydrates in never treated biomass to HMF and furfural in a microwave reactor was investigated. The influence of reaction temperature, time, feedstock, addition of Lewis and Bronsted acids, solvent and solvent to aqueous ratio were studied to find the optimum process conditions to maximize the yields of furfurals. The reaction conditions of 200 degrees C for 5 min with 33 mM HCl and 8 mM AlCl 3 using a dioxane/water (4:1) miscible solvent system were found to be the most conducive for direct dehydration of the glucan and hemicelluloses present in untreated poplar wood to furfural and HMF in yields of 91 and 69%, respectively. Furfural could be easily produced in yields greater than 80%, and once formed, it was found to be stable under the various process conditions explored. In contrast, HMF yields varied with both reaction time and temperature, as it readily underwent rehydration to levulinic acid in yields approaching 25-30% at increased reaction severity. The additions of both Bronsted (HCl) and Lewis (AlCl 3 ) acids in catalytic amounts, i.e., 33 and 8 mM, respectively, were required to maximize the yield of furfurals. Reactions were also performed on other feedstocks (corn stover, switchgrass, loblolly pine, and pure cellulose) to investigate the effect of feedstock type on furfurals yields. Results showed that HMF and furfural yields were primarily dependent on hexosan and pentosan loading regardless of the type of feedstock. In addition, biomass physical features, such as crystallinity or the presence of other biomass constituents, such as lignin, had little influence on furfurals yields.

09 BIOMASS FUELS↗
DOE OSTI2021

Pretreatment of Biomass by Selected Type-III Deep Eutectic Solvents and Evaluation of the Pretreatment Effects on Hydrothermal Carbonization

Hydrothermal carbonization (HTC) is a novel thermochemical conversion that converts wet biomass into energy dense solid fuel. Residual moisture under subcritical conditions reacts with a lignin-cellulose-hemicellulose matrix with the major reactions being identified as dehydration and decarboxylation. Among other reaction parameters (e.g., temperature, time, pressure), biomass morphology often plays a key role in HTC. The hypothesis of this study was enhancing the porous structure of biomass without significantly affecting biopolymer composition would augment hydrothermal carbonization (HTC). To prove the hypothesis, two type-III deep eutectic solvents (DESs), namely choline chloride:urea (ChCl:Urea, 1:2 mol/mol) and methyltriphenylphosphonium bromide:ethylene glycol (MTPB:EG, 1:4 mol/mol), were studied to pretreat loblolly pine at room temperature and ambient pressure for 1 h. DES pretreatment shows swelling of the biomass, increasing the surface fiber-to-fiber gap length by 52% and 185% for ChCl:Urea and MPTB:EG pretreatments, respectively. The total pore volume remained intact (2.6 × 10 –3 cm 3 /g), although new small pores evolved, and existing pores were abated with DES pretreatment. Hydrochars prepared from DES pretreated loblolly pine showed a high O/C and H/C ratio resulting in a significant increase of energy content (up to 42%) and a decrease of mass yield (up to 50 wt %), indicating an enhancement of HTC severity due to the alteration of surface morphology by DES. Finally, a preliminary process economics revealed that integrated DES pretreatment-HTC would increase fixed capital investment but decrease the cost of operation and manufacturing than the standalone HTC process.

09 BIOMASS FUELS↗
DOE OSTI2022

Cas9-Based Metabolic Engineering of Issatchenkia orientalis for Enhanced Utilization of Cellulosic Hydrolysates

Issatchenkia orientalis, exhibiting high tolerance against harsh environmental conditions, is a promising metabolic engineering host for producing fuels and chemicals from cellulosic hydrolysates containing fermentation inhibitors under acidic conditions. Although genetic tools for I. orientalis exist, they require auxotrophic mutants so that the selection of a host strain is limited. We developed a drug resistance gene (cloNAT)-based genome-editing method for engineering any I. orientalis strains and engineered I. orientalis strains isolated from various sources for xylose fermentation. Specifically, xylose reductase, xylitol dehydrogenase, and xylulokinase from Scheffersomyces stipitis were integrated into an intended chromosomal locus in four I. orientalis strains (SD108, IO21, IO45, and IO46) through Cas9-based genome editing. Furthermore, the resulting strains (SD108X, IO21X, IO45X, and IO46X) efficiently produced ethanol from cellulosic and hemicellulosic hydrolysates even though the pH adjustment and nitrogen source were not provided. As they presented different fermenting capacities, selection of a host I. orientalis strain was crucial for producing fuels and chemicals using cellulosic hydrolysates.

09 BIOMASS FUELS↗
DOE OSTI2020

Anisotropic Motions of Fibrils Dictated by Their Orientations in the Lamella: A Coarse-Grained Model of a Plant Cell Wall

Plant cell walls are complex systems that exhibit the characteristics of both rigid and soft material depending on their external perturbations. The three main polymeric components in a plant primary cell wall are cellulose fibrils, hemicellulose, and pectins. These components interact in a hierarchical fashion giving rise to mesoscale structural features such as cellulose bundles, lamella stacking, and so on. Although several studies have focused on understanding these unique structural features, a clear picture linking them to cell wall mechanics is still lacking. As a first step toward this goal, a phenomenological model of plant cell wall has been developed in this work by using available experimental data to investigate the underlying connections between mesoscale structural features and the motions of fibrils during deformation. In this model cellulose fibrils exhibit motions such as angular reorientations and kinking upon forced stretching. Furthermore, these motions are dependent on the orientation of fibrils with respect to the stretch direction, i.e., fibrils that are at an angle to the stretch direction exhibit predominant angular reorientations, while fibrils transverse to the stretch direction undergo kinking as a result of transverse compression. Varying the chain length of pectin had negligible effects on these motions. One of the main contributions from this work is the development of a simple model that can be easily fine-tuned to test other hypotheses and extended to include additional experimental knowledge about the structural aspects of cell walls in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Selective Detection of Intermediate-Amplitude Motion by Solid-State NMR

The coexistence of rigid and mobile molecules or molecular segments abounds in biomolecular assemblies. Examples include the carbohydrate-rich cell walls of plants and intrinsically disordered proteins that contain rigid β-sheet cores. In solid-state nuclear magnetic resonance (NMR) spectroscopy, dipolar polarization transfer experiments are well suited for detecting rigid components, whereas scalar-coupling experiments are well suited for detecting highly mobile components. However, few NMR methods are available to detect the segments that undergo intermediate-amplitude fast motion. Here, we introduce two NMR experiments, a two-dimensional T 2H -filtered CP-hCH correlation and a three-dimensional J-INADEQUATE CCH correlation, to observe this intermediate-amplitude motion. Both experiments involve 1 H detection under fast magic-angle spinning (MAS). By combining 1 H transverse relaxation (T 2H ) filters with dipolar polarization transfer, we suppress the signals of both highly rigid and highly mobile species, thus revealing the signals of intermediate mobile species. 1 H detection under fast MAS is crucial for distinguishing the different motional amplitudes. Here, we demonstrate these techniques on several plant cell wall samples and show that they allow the selective detection and resolution of certain hemicellulose and pectin signals, which are usually masked by the signals of the rigid cellulose and the highly dynamic pectins in purely dipolar and scalar NMR spectra.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Surface Chemistry and Particle Morphology Changes in Pine Biomass under Indirect Thermal Gradients: Implications for Feed Screw Design

The conversion of biomass feedstocks into fuels and chemicals using fast pyrolysis is a promising approach to renewable energy. Feed screws that convey biomass to pyrolysis reactors, however, often encounter plugging. Indirect heating of the feed screw occurs due to contact with the pyrolysis chamber, resulting in a heating gradient ranging from ambient temperature (22 °C) to reactor temperature (500 °C). Given that major cell wall macromolecules, such as lignin, cellulose, and hemicellulose, begin to produce bio-oils and volatile resin acid compounds within this temperature gradient, we hypothesized that indirect heating during feed screw conveyance is sufficient to cause premature degradation of biomass. We characterized this degradation by observing increases in surface roughness, changes in overall particle morphology, and the production and deposition of bio-oils on biomass particle surfaces. Correlative analysis between optical in situ hot-stage microscopy, confocal Raman spectroscopy, and SEM analysis revealed that heating at temperatures as low as 375 °C caused significant increases in surface roughness, with large fissures forming between and within cell walls. Additionally, droplets of bio-oil were observed on particles, especially in the bark and cambium samples. This work suggests that these phenomena contribute to particle agglomeration, leading to feed screw plugging, and that engineering a solution to cool the feed screw could prevent particle agglomeration and reduce plugging incidents, thereby increasing biomass processing efficiency.

09 BIOMASS FUELS↗
DOE OSTI2020

Investigation of a Lignin-Based Deep Eutectic Solvent Using p -Hydroxybenzoic Acid for Efficient Woody Biomass Conversion

Deep eutectic solvents (DESs) are effective solvents for biomass conversion and have been proposed as alternatives to ionic liquids (ILs). In this paper, we first report an effective pretreatment of woody biomass using a novel hardwood lignin-based DES prepared from p -hydroxybenzoic acid (PB) and choline chloride (ChCl), which are used as the hydrogen bond donor and acceptor, respectively. The impacts of the ChCl-PB DES on structural properties and enzymatic hydrolysis of poplar wood were comprehensively evaluated. The performance of ChCl-PB DES was also compared with two other DESs with p -coumaric acid (PCA) and 4-hydroxybenzaldehyde (PHA) as the hydrogen bond donors, which have been successfully applied to herbaceous biomass conversion in previous studies. The results showed that hemicellulose and lignin were effectively fractionated during the proposed ChCl-PB DES pretreatment under a relatively mild temperature. The ChCl-PB DES pretreatment resulted in up to 69% of delignification, and the pretreated poplar residues had over 90% of glucose yield by a 72 h-enzymatic hydrolysis. Transformation of poplar biomass during the DES pretreatment was evaluated by gel permeation chromatography (GPC), two-dimensional heteronuclear single quantum coherence (2D-HSQC), and 31 P nuclear magnetic resonance (NMR) spectroscopies. The recovered lignin showed relatively high purity, narrow molecular weight distribution (PDI < 1.6), and relatively low molecular weight (~1400 g/mol for M w ). A sustainable process was achieved by recycling DES as well as the utilization of PB, which is a producible aromatic compound from hardwood lignin, for the proposed DES formation in the system. This study indicates that the proposed novel DES with a hardwood lignin-based PB compound is a promising pretreatment solvent to achieve an economically feasible biomass conversion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Pretreatment with Sodium Methyl Mercaptide Increases Carbohydrate Yield during Kraft Pulping

Kraft pulping is the predominant technology in the pulp and paper industry for removing lignin from wood carbohydrates to produce paper, board, packaging, tissue, and specialty cellulose. However, the kraft process is energy intensive and expensive, and its yield is limited by the degradation of carbohydrates. Pretreatment can increase carbohydrate yield by limiting degradation via primary peeling of reducing end groups. However, protection of galactoglucomannan (GGM), the primary hemicellulose component of softwood, is minimal when conventional pretreatments are used. Here, we investigated the effectiveness of sodium methyl mercaptide pretreatment on southern pine wood chips under a range of experimental conditions. We found that pretreatment of biomass with 4.38% sodium methyl mercaptide at pH 12 and 105 °C for 60 min provided small but significant increases in xylan and cellulose yields relative to control conditions, but preservation of GGM was minimal. Furthermore, to provide insight into molecular-scale details of primary peeling, pretreatment, and alkaline hydrolysis, we performed classical molecular dynamics (MD) simulations under selected process conditions and quantum mechanical (QM) calculations of selected reactions. MD simulations showed that C1 of the GGM reducing end is more readily accessible by HO – and CH 3 S – ions than in cellulose. The free energy barrier for peeling calculated with QM is lower for GGM than for cellulose, indicating increased susceptibility to peeling. In addition, we found that GGM may be more susceptible to internal chain cleavage than cellulose. Thus, even though reducing end groups may be protected initially through pretreatment, new unprotected reducing end groups may be generated through alkaline hydrolysis. Taken together, these findings show the promise of methyl mercaptide as a pretreatment technology for cellulose retention and also provide molecular insight for improving its effectiveness toward GGM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗