Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heat flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Analysis of forced convection heat flow effects in horizontal ribbon growth from the melt

A heat transport analysis which considers forced convective fluid flow induced by the motion of a continuous solid ribbon over a melt has been done for horizontal ribbon growth. A model has been developed which treats both 'active' and 'passive' cooling at the ribbon surface. The results show that heat flow from the melt requires active cooling in the region of the leading growth edge or growth tip. Steady-state liquid-solid interface shape is analyzed and numerical results are given for steady-state pulling of silicon ribbon.

Zoutendyk, J. A.↗
NASA NTRS1975

Microwave emission spectrum of the moon - Mean global heat flow and average depth of the regolith

Earth-based observations of the lunar microwave brightness temperature spectrum at wavelengths between 5 and 500 centimeters, when reexamined in the light of physical property data derived from the Apollo program, tentatively support the high heat flows measured in situ and indicate that a regolith thickness between 10 and 30 meters may characterize a large portion of the lunar near side.

Keihm, S. J.↗
NASA NTRS2002

Heat Flow, Thermal Conductivity, and the Plausibility of the White Mars Hypothesis

Due to the low thermal conductivity of CO2 ice and clathrate vs. water ice, we find that liquid water reservoirs would not be confined to the deep subsurface as predicted by the controversial White Mars model, even assuming low global heat flow. Additional information is contained in the original extended abstract.

Urquhart, M. L.↗
NASA NTRS1979

Sunspots and the physics of magnetic flux tubes. VI - Convective propulsion. VII - Heat flow in a convective downdraft

The effect of negative aerodynamic drag in an ideal fluid subject to convective instability is considered. It is shown that a cylinder moving in such a fluid is propelled forward in its motion by the convective forces and that the characteristic acceleration time is comparable to the onset time of convective motions in the fluid. It is suggested that convective propulsion plays an important role in the dynamics of flux tubes extending through the surface of the sun. The suppression of the upward heat flow in a Boussinesq convective cell with free upper and lower boundaries by a downdraft is then analyzed. Application to the solar convection zone indicates that downdrafts of 1 to 2 km/s at depths of 1000 to 4000 km beneath the visible surface of the sun are sufficient to reduce the upward heat flux to a small fraction of the ambient value.

Parker, E. N.↗
NASA NTRS1980

A high performance cocurrent-flow heat pipe for heat recovery applications

By the introduction of a plate-and-tube separator assembly into a heat pipe vapor core, it has been demonstrated that axial transport capacity in reflux mode can be improved by up to a factor of 10. This improvement is largely the result of eliminating the countercurrent shear that commonly limits reflux heat pipe axial capacity. With benzene, axial heat fluxes up to 1800 W/sq cm were obtained in the temperature range 40 to 80 C, while heat flux densities up to 3000 W/sq cm were obtained with R-11 over the temperature range 40 to 80 C. These very high axial capacities compare favorably with liquid metal limits; the sonic limit for liquid sodium, for example, is 3000 W/sq cm at 657 C. Computational models developed for these cocurrent flow heat pipes agreed with experimental data within + or - 25%.

Saaski, E. W.↗
NASA NTRS1976

Heat flow anomaly associated with dike intrusion. II

An investigation reported by Horai (1974) is continued. A special case of the steady state temperature field associated with dike intrusion is studied, taking into account an infinite vertical downward extension of the isotherm of rectangular shape approximating the dike. The considered case represents a problem of two-dimensional steady state thermal conduction. The technique of conformal mapping used is identical to the method employed by Horai (1974). The characteristics of surface heat flow associated with an infinitesimal thin dike of certain temperature with the considered extension are shown in a graph.

Horai, K.-I.↗
NASA NTRS1995

Volcanic eruptions on Io: Heat flow, resurfacing, and lava composition

We model an infrared outburst on Io as being due to a large, erupting lava flow which increased its area at a rate of 1.5 x 10(exp 5)/sq m and cooled from 1225 to 555 K over the 2.583-hr period of observation. The inferred effusion rate of 3 x 10(exp 5) cu m/sec for this eruption is very high, but is not unprece- dented on the Earth and is similar to the high eruption rates suggested for early lunar volcanism. Eruptions occur approxi- mately 6% of the time on Io. These eruptions provide ample resurfacing to explain Io's lack of impact craters. We suggest that the large total radiometric heat flow, 10(exp 14) W, and the size and temperature distribution of the thermal anomalies (McEwen et al. 1992; Veeder et al. 1994) can be accounted for by a series of silicate lava flows in various stages of cooling. We propose that the whole suite of Io's currently observed thermal anomalies was produced by multiple, high-eruptive-rate silicate flows within the past century.

Blaney, Diana L.↗
NASA NTRS1973

A heat flow calorimeter

Reaction mechanism for nickel-cadmium cell is not known well enough to allow calculation of heat effects. Calorimeter can measure heat absorbed or evolved in cell, by determining amount of external heat that must be supplied to calorimeter to maintain constant flow isothermal heat sink.

Johnston, W. V.↗
NASA NTRS1985

Use of two-phase flow heat transfer method in spacecraft thermal system

In space applications, weight, volume and power are critical parameters. Presently liquid freon is used in the radiator planels of the Space Shuttle to dissipate heat. This requires a large amount of freon, large power for pumps, large volume and weight. Use of two-phase flow method to transfer heat can reduce them significantly. A modified commercial vapor compression refrigerator/freezer was sucessfully flown in STS-4 to study the effect of zero-gravity on the system. The duty cycle was about 5 percent higher in flight as compared to that on earth due to low flow velocity in condenser. The vapor Reynolds number at exit was about 4000 as compared to about 12,000. Efforts are underway to design a refrigerator/freezer using an oil-free compressor for Spacelab Mission 4 scheduled to fly in January 1986. A thermal system can be designed for spacecraft using the two-phase flow to transfer heat economically.

Hye, A.↗