Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gravity anomaly”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Global detailed geoid computation and model analysis

Comparisons and analyses were carried out through the use of detailed gravimetric geoids which we have computed by combining models with a set of 26,000 1 deg x 1 deg mean free air gravity anomalies. The accuracy of the detailed gravimetric geoid computed using the most recent Goddard earth model (GEM-6) in conjunction with the set of 1 deg x 1 deg mean free air gravity anomalies is assessed at + or - 2 meters on the continents of North America, Europe, and Australia, 2 to 5 meters in the Northeast Pacific and North Atlantic areas, and 5 to 10 meters in other areas where surface gravity data are sparse. The R.M.S. differences between this detailed geoid and the detailed geoids computed using the other satellite gravity fields in conjuction with same set of surface data range from 3 to 7 meters.

Marsh, J. G.↗

New Analysis of Lunar Prospector Radio Tracking Data Brings the Nearside Gravity Field of the Moon with an Unprecedented Resolution

A new analysis of the Doppler tracking data from the Lunar Prospector mission in 1999 revealed a number of previously-unseen gravity anomalies at spatial scales as small as 27 km over the nearside. The tracking data at low altitudes (50 km or below) were better analyzed to resolve the nearside features without dampening from a power law constraint, by partitioning the gravity parameters concentrated on either the nearside or farside. The resulting model presents gravity anomalies correlated with topography with a correlation coefficient of 0.7 or higher from degree 50 to 150, the widest bandwidth yet. The gravity-topography admittance of approx. 70 mGal/km is found from numerous craters of which diameters are 60 km or less. In addition, the new model produces orbits that fit to independent radio tracking data from the Lunar Reconnaissance Orbiter and Kaguya (SELENE) better than previous gravity models. This high-resolution model can be of immediate use to geophysical analysis of small craters. Our technique could be applied to an upcoming mission, the Gravity Recovery And Interior Laboratory and useful to extract short wavelength signals from the MESSENGER Doppler data.

Han, Shin-Chan↗

New Mars free-air and Bouguer gravity: Correlation with topography, geology and large impact basins

Free-air and Bouguer gravity anomalies from a 50x50 field (MGM635), derived at the Goddard Space Flight Center, with global topography, geology, and the distribution of large impact basins was compared. The free-air gravity anomalies were derived from re-analysis of Viking Orbiter and Mariner 9 tracking data and have a spatial resolution of 250-300 km. Bouguer anomalies were calculated using a 50x50 expansion of the current Mars topography and the GSFC degree 50 geoid as the equipotential reference surface. Rotational flattening was removed using a moment of inertia of 0.365 and the corrections from Table B2 of Sleep and Phillips. Crustal density and mean density were assumed to be 2.9 and 3.93 gm/cm(sup 3). The spherical harmonic topography used has zero mean elevation, and differs from the USGS maps by about 2 km. Comparisons with global geology use a simplified map with about 1/3 the number of units on the current maps. For correlation with impact basins, the recent compilation by Schultz and Frey was used.

Frey, Herbert↗

Plumes in the mantle

Free air and isostatic gravity anomalies for the purposes of geophysical interpretation are presented. Evidence for the existance of hotspots in the mantle is reviewed. The prosposed locations of these hotspots are not always associated with positive gravity anomalies. Theoretical analysis based on simplified flow models for the plumes indicates that unless the frictional viscosities are several orders of magnitude smaller than the present estimates of mantle viscosity or alternately, the vertical flows are reduced by about two orders of magnitude, the plume flow will generate implausibly high temperatures.

Khan, M. A.↗

High-resolution Local Gravity Model of the South Pole of the Moon from GRAIL Extended Mission Data

We estimated a high-resolution local gravity field model over the south pole of the Moon using data from the Gravity Recovery and Interior Laboratory's extended mission. Our solution consists of adjustments with respect to a global model expressed in spherical harmonics. The adjustments are expressed as gridded gravity anomalies with a resolution of 1/6deg by 1/6deg (equivalent to that of a degree and order 1080 model in spherical harmonics), covering a cap over the south pole with a radius of 40deg. The gravity anomalies have been estimated from a short-arc analysis using only Ka-band range-rate (KBRR) data over the area of interest. We apply a neighbor-smoothing constraint to our solution. Our local model removes striping present in the global model; it reduces the misfit to the KBRR data and improves correlations with topography to higher degrees than current global models.

South Pole↗

Status of the geopotential

Satellite laser ranging, satellite altimetry, and improved measurements of surface gravitational anomalies have broadened the data base on intermediate and short wavelength regions of the earth gravity field. The global data set served to develop new geopotential models with a resolution in spherical harmonics out to degree 180. The resolution was made possible using Seasat altimetry data containing 56,761 values of 1 x 1 deg gravity anomalies. Satellite-to-satellite tracking techniques involving the Geos-3 and Apollo spacecraft data for the sea surface temperature have yielded accurate intermediate wavelength gravity variations which correlate well with residual depth anomalies. Oceanic gravity anomalies have been computed directly from satellite altimetry or through statistical estimation using oceanic geoid heights. The data sets for gravimetric geoids have been compared with altimetric surfaces to identify areas which were of interest for geophysical investigation. Future data sets could become available from a proposed satellite-to-satellite Doppler tracking system (Gravsat) launched by NASA.

Lerch, F. J.↗

Gravity field of Venus at constant altitude and comparison with earth

The gravity field of Venus is characterized in gravity-anomaly and geoid-undulation maps produced by applying the harmonic-spline technique (Shure et al., 1982 and 1983; Parker and Shure, 1982) to Pioneer Venus Orbiter line-of-sight data. A positive correlation between Venusian topographic features and gravity anomalies is observed, in contrast to the noncorrelation seen on earth, and attributed to the thicker crust of Venus (70-80 vs 5-40 km for earth), crustal loading by recent volcanism, and possible regional elevation due to deep heating and thermal expansion.

Bowin, C.↗

The gravity field in the central Pacific from satellite-to-satellite tracking

Satellite-to-satellite Doppler tracking between the ATS 6 and the GEOS 3 spacecraft was used to measure the high-degree and high-order gravity field over an 80-deg region in the central Pacific Ocean. Forty passes of GEOS 3/ATS 6 Doppler data have been analyzed. The precision of these range rate data is about 0.3 mm/s, and the line-of-sight gravity anomalies recovered from these data have a precision of about 0.2 mGal at the GEOS 3 altitude of about 840 km. In general, the agreement between the SST-derived map and the conventional GEM method and an altimeter-derived geoid is good. Eight significant positive gravity anomalies were exposed in the central Pacific. Generally speaking, the anomalies form a roughly east-west pattern of alternating sign in the central region, and near the East Pacific they strike about north and south.

Marsh, J. G.↗

Mascon Basins

Large basins across the lunar surface have observable positive gravity anomalies within the interiors, referred to as mass concentrations, or “mascons.” Some near-side mascons can be explained by flexural support of the mare basalts within the basins, like Orientale, that have excessive mascons. There are also some basins that exhibit masons but lack mare basalts. Lunar gravity and topography data are most often used to determine the morphology and gravity anomalies of the mascons.

Caitlin Ahrens↗

Large impacts in the Baltic shield with special attention to the Uppland structure

Within the Baltic Shield several very large structures have been identified and are suspected to be of meteorite impact origin. Some of these deeply eroded circular features are presented with special attention to the Uppland structure, where several indications point toward an impact origin in the mid-Proterozoic. The structures exceed 100 km in diameter and the topographic expression is inferior or absent. An arcuate arrangement of lithologies occurs around the margin of the structures and the central regions show conform magnetic and positive gravity anomalies. The Uppland structure is approximately 320 km in diameter as expressed by morphological, geological, and geophysical concentric patterns. The central part is topographically remarkably flat and is characterized by an unusual irregular fracture pattern. A subcircular central tonalite with density of 2.81 Mg(sup -3) gives a positive gravity anomaly of 35 mgal and the gravimetric profile is very similar to that of Manicouagan and Vredefort. The tonalite constitutes a huge antiform, 80 km in diameter, probably representing a 12-km structural uplift of infracrustal rocks. The flancs of the tonalite are characterized by recrystallized pseudotachylitic breccia dykes and breccia zones. Around the central parts amphibolite-grade metamorphic rocks appear as large fragments within a fine-grained granite interpreted as a thermally annealed melt rock. Several occurrences of breccia dykes and breccia-bearing melts have been identified about 100 km from the gravimetric center of the structure. Impact-related ore deposits are located around the margin of the structure and are interpreted as preexisting downfaulted iron formations, and deposits formed from remobilization of these preimpact occurrences. The so-called ball ores are interpreted to have formed by fluid injection similar to the formation of breccia dykes. The extensive hydrothermal alteration along the outer margin of the structure have created extreme soda and K-enriched rocks ('leptites') from preexisting gneiss granites and supracrustal sedimentary gneisses.

Henkel, H.↗

Long wavelength gravity and topography anomalies

It is shown that gravity and topography anomalies on the earth's surface may provide new information about deep processes occurring in the earth, such as those associated with mantle convection. Two main reasons are cited for this. The first is the steady improvement that has occurred in the resolution of the long wavelength gravity field, particularly in the wavelength range of a few hundred to a few thousand km, mainly due to increased coverage of terrestrial gravity measurements and the development of radar altimeters in orbiting satellites. The second reason is the large number of numerical and laboratory experiments of convection in the earth, including some with deformable upper and lower boundaries and temperature-dependent viscosity. The oceans are thought to hold the most promise for determining long wavelength gravity and topography anomalies, since their evolution has been relatively simple in comparison with that of the continents. It is also shown that good correlation between long wavelength gravity and topography anomalies exists over some portions of the ocean floor

Watts, A. B.↗

Gravity, topography, and crustal evolution of Venus

A method for estimating radial gravity anomalies from line-of-sight acceleration data, their interpolation, and the use of iteration for improved radial anomaly estimates is outlined. Results based on spherical harmonic coefficients for Venus' gravitational field are first discussed, and the procedure is then presented for determining radial acceleration estimates from the line-of-sight vectors and for interpolating the results at preselected locations using the method of objective mapping. A preliminary gravity anomaly map of much of the surface of Venus based on the first estimation step of this technique is presented, and the results are discussed.

Bowin, C.↗

High-degree Gravity Models from GRAIL Primary Mission Data

We have analyzed Ka‒band range rate (KBRR) and Deep Space Network (DSN) data from the Gravity Recovery and Interior Laboratory (GRAIL) primary mission (1 March to 29 May 2012) to derive gravity models of the Moon to degree 420, 540, and 660 in spherical harmonics. For these models, GRGM420A, GRGM540A, and GRGM660PRIM, a Kaula constraint was applied only beyond degree 330. Variance‒component estimation (VCE) was used to adjust the a priori weights and obtain a calibrated error covariance. The global root‒mean‒square error in the gravity anomalies computed from the error covariance to 320×320 is 0.77 mGal, compared to 29.0 mGal with the pre‒GRAIL model derived with the SELENE mission data, SGM150J, only to 140×140. The global correlations with the Lunar Orbiter Laser Altimeter‒derived topography are larger than 0.985 between l = 120 and 330. The free‒air gravity anomalies, especially over the lunar farside, display a dramatic increase in detail compared to the pre‒GRAIL models (SGM150J and LP150Q) and, through degree 320, are free of the orbit‒track‒related artifacts present in the earlier models. For GRAIL, we obtain an a posteriori fit to the S‒band DSN data of 0.13 mm/s. The a posteriori fits to the KBRR data range from 0.08 to 1.5 micrometers/s for GRGM420A and from 0.03 to 0.06 micrometers/s for GRGM660PRIM. Using the GRAIL data, we obtain solutions for the degree 2 Love numbers, k20=0.024615+/-0.0000914, k21=0.023915+/-0.0000132, and k22=0.024852+/-0.0000167, and a preliminary solution for the k30 Love number of k30=0.00734+/-0.0015, where the Love number error sigmas are those obtained with VCE.

Primary 1↗

Analysis of altimetry over the Aral Sea

Satellite based altimetric data taken by GEOS-3, SEASAT, and GEOSAT over the Aral Sea are analyzed and a least squares collocation technique is used to predict the geoid undulations on a 0.25 by 0.25 degree grid and to transform these geoid undulations to free air gravity anomalies. Rapp's 180 by 180 geopotential model is taken as the empirical model. The collocation procedure is performed with a set of local residual empirical covariance functions. For comparison, Rapp's global covariance functions and Jordan's self-consistent theoretical covariance functions based on Jordan's formulation and on locally derived parameters are also used to grid geoid undulations and to predict gravity anomalies. The sensitivity of the collocation results to the choice of covariance functions is discussed.

Au, Andrew Y.↗

Geophysical Characterization of Some Terranes and the Geophysical Modeling of Candidate Suture Zones

Indian participation in this project was terminated during the last year by a sudden withdrawal of support by the Department of Science and Technology, India, to the Indian Institute of Geomagnetism, Bombay. As a result, significant changes in the project focus had to be undertaken. Much of the work carried out at Southern Illinois University at Carbondale during the first year of the project anticipated the Indian participation and included development of computer programs to be used on gravity and magnetic data from the Indian subcontinent and preparations for fieldwork, tutorials, and workshops in India. Despite these setbacks, which were beyond our control, a number of significant tasks have been accomplished during the project period. These include: (1) Completion of digitization of the regional Bouguer gravity anomaly map of India and the regional ground total intensity magnetic anomaly map of India at an overdetermined spacing of 0.05 degrees. (2) We investigated and assessed the limitations of the Euler method using environmental examples because detailed aeromagnetic maps of parts of India were not available for interpretation by this method. (3) We also undertook an assessment of a suture zone between the Nyaza Craton (Archean) and the Mozambique Belt (Pan African) in the Kenya Rift, Africa, using gravity anomalies and the lithospheric seismological models. (4) We studied Magsat and high-altitude (approx. 4 km) aeromagnetic data over Canada.

Ravat, D.↗

The effect of remote zones on the accuracy of evaluating the Molodensky

An analytical method is presented for determining the error in computing the gravity anomaly from the Molodensky integral if geoidal undulation data in remote zones are neglected. The error is given in terms of the usual degree variance and a set of parameters which are functions only of the size of the area in which undulation data are taken. A numerical calculation using Kaula's degree variances indicates that it is necessary to integrate the Molodensky integral over approximately a hemisphere in order to reduce the effect of neglected data to the order of 1 milligal in the computation of gravity anomaly.

Buglia, J. J.↗

The Cretaceous-Tertiary Impact Crater and the Cosmic Projectile that Produced it

Evidence gathered to date from topographic data, geophysical data, well logs, and drill-core samples indicates that the buried Chicxulub basin, the source crater for the approximately 65 Ma Cretaceous-Tertiary (K/T) boundary deposits, is approximately 300 km in diameter. A prominent topographic ridge and a ring of gravity anomalies mark the position of the basin rim at approximately 150 km from the center. Wells in this region recovered thick sequences of impact-generated breccias at 200-300 m below present sea level. Inside the rim, which has been severely modified by erosion following impact, the subsurface basin continues to deepen until near the center it is approximately 1 km deep. The best planetary analog for this crater appears to be the 270 km-diameter Mead basin on Venus. Seismic reflection data indicate that the central zone of downward displacement and excavation (the transient crater is approximately 130 km in diameter, consistent with previous studies of gravity anomaly data). Our analysis of projectile characteristics utilizes this information, coupled with conventional scaling relationships, and geochemical constraints on the mass of extraterrestrial material deposited within the K/T boundary layer. Results indicate that the Chicxulub crater would most likely be formed by a long-period comet composed primarily of nonsilicate materials (ice, hydrocarbons, etc.) and subordinate amounts (less than or equal to 50 percent) primitive chondritic material. This collision would have released the energy equivalent to between 4 x 10(exp 8) and 4 x 10(exp 9) megatons of TNT. Studies of terrestrial impact rates suggest that such an event would have a mean production rate of approximately 1.25 x 10(exp -9) y(exp -1). This rate is considerably lower than that of the major mass extinctions over the last 250 million years (approximately 5 x 10(exp -7) y(exp -1). Consequently, while there is substantial circumstantial evidence establishing the cause-effect link between the Chicxulub basin forming event and the K/T biological extinctions, the results of our analysis do not support models of impact as a common or singular causative agent of mass extinctions on Earth.

Sharpton, Virgil L.↗

When does small-scale convection begin beneath oceanic lithosphere?

A numerical model of small-scale convection in a fluid of variable viscosity is described. The results indicate that recently observed gravity anomalies showing a pattern of highs and lows aligned in the direction of oceanic plate motion may be the result of small-scale mantle flow. The convective flow must begin in the first six Myr of lithospheric cooling to produce the observed signals, which is not inconsistent with constraints on the viscosity of the mantle. The calculated trend for the subsidence of the ocean floor is found to be almost linear with the square root of time even when small-scale convection has significantly changed the rate of subsidence. For average shallow asthenospheric viscosities of about 10 to the 18th Pa/s, the model subsidence can match data for the oceans and reproduce the magnitude and wavelength of the observed gravity anomalies.

Buck, W. R.↗