Fabrication and Property Development for a Functionally Graded Austenitic to Maraging Stainless Steel Component
No abstract available
Dillon, R. Peter↗
SEARCH · Engineering Papers
Results for “functional properties”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Using the GEOS 5 Nature Run to Simulate 2053 nm Coherent Doppler Wind Lidar Observations
Wind observations are a critical part of the current global observation system used for Numerical Weather Prediction (NWP). Wind lidars have been cited as precise instruments that can provide 3-dimensional wind measurements. Several studies have conducted observing system experiments (OSEs) with existing lidar observations or observing system simulation experiments (OSSEs) with simulated lidar observations highlighting the benefits of wind lidar measurements to NWP. Previous studies using simulated lidar observations have typically tied aerosol optical properties to functions of relative humidity instead of to aerosol properties. A methodology is presented for simulating wind measurements from a novel 2053 nm lidar using aerosol properties derived using the GEOS-5 Nature Run, along with estimating winds derived from cloud information. Some assumptions regarding aerosol scattering and the distribution of clouds are explored, along with the role of observation weighting, and implications for representativeness error. Results from a preliminary OSSE are presented highlighting the importance of assumptions used to derive data from cloud returns and aerosol scattering. While a longer duration study is required, results show a general reduction in analysis error when lidar measurements are ingested.
Bryan M. Karpowicz↗
Using the GEOS 5 Nature Run to Simulate 2053 nm Coherent Doppler Wind Lidar Observations
Wind observations are a critical part of the current global observation system used for Numerical Weather Prediction (NWP). Wind lidars have been cited as precise instruments that can provide 3-dimensional wind measurements. Several studies have conducted observing system experiments (OSEs) with existing lidar observations or observing system simulation experiments (OSSEs) with simulated lidar observations highlighting the benefits of wind lidar measurements to NWP. Previous studies using simulated lidar observations have typically tied aerosol optical properties to functions of relative humidity instead of to aerosol properties. A methodology is presented for simulating wind measurements from a novel 2053 nm lidar using aerosol properties derived using the GEOS-5 Nature Run, along with estimating winds derived from cloud information. Some assumptions regarding aerosol scattering and the distribution of clouds are explored, along with the role of observation weighting, and implications for representativeness error. Results from a preliminary OSSE are presented highlighting the importance of assumptions used to derive data from cloud returns and aerosol scattering. While a longer duration study is required, results show a general reduction in analysis error when lidar measurements are ingested.
Bryan M. Karpowicz↗
Elliptic Functions and Integrals with Real Modulus in Fluid Mechanics
Advantage of the elliptic functions and of the more general functions of Schwarz for fluid mechanics. Flows outside and inside polygons. Application to the calculation of an elbow diffuser for a wind tunnel. Properties of the elliptic integrals of the first kind and of the elliptic functions. Properties of the theta functions and decomposition of the elliptic functions into products of theta functions. Properties of the zeta functions. Decomposition of the elliptic functions into sums of zeta functions and calculations of the elliptic integrals. Applications to the calculation of wing profiles, of compressor profiles, and to the study of the vibrations of airplane wings and of compressor vanes. The manuscript of the present paper was checked by Mr. Eichelbrenner who corrected several imperfections and suggested numerous improvements to make reading of the paper easier. However, the limited subject does not permit filling in more than an incomplete knowledge of the properties of analytic functions.
Legendre, Robert↗
Thermoelectric properties of 80 a/o Si - 20 a/o Ge alloy as a function of time and temperature
Thermoelectric properties as function of time and temperature for phosphorous doped n-type silicon-germanium alloy
Raag, V.↗
Dynamic analysis of the GEOS satellite
The assumed modes method is used to investigate the stability of the GEOS satellite. The system is discretized by representing the continuous displacement by finite series of space-dependent admissible functions multiplied by time-dependent generalized coordinates. The spatial dependence is eliminated by integration over the elastic domains, so that the testing functional reduces to a testing function. The sign properties of the testing function are then tested and the equilibrium defined as nontrivial. In considering the stability of small motions about nontrivial equilibrium, it is shown that if the analysis performed by ignoring the motion of the mass center indicates stability, then the system remains stable if the motion of the mass center is included.
Meirovitch, L.↗
Reflections, diffractions, and surface waves for an interior impedance wedge of arbitrary angle
The asymptotic-impedance wedge solution for plane-wave illumination at normal incidence is examined for interior wedge diffraction. An efficient method for calculating the diffraction coefficient for arbitrary wedge angle is presented. The asymptotic solution isolates the incident, singly reflected, multiply reflected, diffracted, surface-wave, and associated-surface-wave transition fields. Multiply reflected fields (of any order) from the exact solution arise as ratios of auxiliary Maliuzhinets functions; however, by using properties of these functions, the representation can be reduced to products of reflection coefficients, much more efficient for calculation. A surface-wave transition field is added to the surface wave to retain continuity of the total field at the surface wave boundaries. This formulation is equally valid for both exterior and interior wedges with uniform but different impedances on each face, for both soft and hard polarizations.
Griesser, Timothy↗
Absorption and Attenuation Coefficients Using the WET Labs ac-s in the Mid-Atlantic Bight: Field Measurements and Data Analysis
Ocean color algorithms are based on the parameterization of apparent optical properties as a function of inherent optical properties. WET Labs underwater absorption and attenuation meters (ac-9 and ac-s) measure both the spectral beam attenuation [c (lambda)] and absorption coefficient [a (lambda)]. The ac-s reports in a continuous range of 390-750 nm with a band pass of 4 nm, totaling approximately 83 distinct wavelengths, while the ac-9 reports at 9 wavelengths. We performed the ac-s field measurements at nine stations in the Mid-Atlantic Bight from water calibrations to data analysis. Onboard the ship, the ac-s was calibrated daily using Milli Q-water. Corrections for the in situ temperature and salinity effects on optical properties of water were applied. Corrections for incomplete recovery of the scattered light in the ac-s absorption tube were performed. The fine scale of spectral and vertical distributions of c (lambda) and a (lambda) were described from the ac-s. The significant relationships between a (674) and that of spectrophotometric analysis and chlorophyll a concentration of discrete water samples were observed.
Ohi, Nobuaki↗
Thermal Characterization of Functionally Graded Materials: Design of Optimum Experiments
This paper is a study of optimal experiment design applied to the measure of thermal properties in functionally graded materials. As a first step, a material with linearly-varying thermal properties is analyzed, and several different tran- sient experimental designs are discussed. An optimality criterion, based on sen- sitivity coefficients, is used to identify the best experimental design. Simulated experimental results are analyzed to verify that the identified best experiment design has the smallest errors in the estimated parameters. This procedure is general and can be applied to design of experiments for a variety of materials.
Cole, Kevin D.↗
Handbook on thermophysical properties of oxygen
Handbook has been compiled by Cryogenic Data Center of National Bureau of Standards. It covers thermodynamic functions, physical properties, and heat transfer data for oxygen. Handbook addresses primarily low temperature regime, but also includes some data above room temperature.
Roder, H. M.↗
Preparation and Properties of Nanocomposites Prepared From Shortened, Functionalized Single-Walled Carbon Nanotubes
As part of a continuing materials development activity, low color space environmentally stable polymeric materials that possess sufficient electrical conductivity for electrostatic charge dissipation (ESD) have been investigated. One method of incorporating sufficient electrical conductivity for ESD without detrimental effects on other polymer properties of interest (i.e., optical and thermo-optical) is through the incorporation of single-walled carbon nanotubes (SWNTs). However, SWNTs are difficult to fully disperse in the polymer matrix. One means of improving dispersion is by shortening and functionalizing SWNTs. While this improves dispersion, other properties (i.e., electrical) of the SWNTs can be affected which can in turn alter the final nanocomposite properties. Additionally, functionalization of the polymer matrix can also influence nanocomposite properties obtained from shortened, functionalized SWNTs. The preparation and characterization of nanocomposites fabricated from a polyimide, both functionalized and unfunctionalized, and shortened, functionalized SWNTs will be presented.
Smith, J. G., Jr.↗
Literature search of physical property data and of composite surface work function models Semiannual report, 1 May - 1 Nov. 1966
Literature search of physical property data and composite surface work function models
MATHEMATICAL MODEL↗
Wave functions of an elliptical cylinder and certain of their properties
Cylindrical elliptical waves, Mathieu functions, and addition theorems
Source record↗
Dielectric properties of soils as a function of moisture content
Soil dielectric constant measurements are reviewed and the dependence of the dielectric constant on various soil parameters is determined. Moisture content is given special attention because of its practical significance in remote sensing and because it represents the single most influential parameter as far as soil dielectric properties are concerned. Relative complex dielectric constant curves are derived as a function of volumetric soil water content at three frequencies (1.3 GHz, 4.0 GHz, and 10.0 GHz) for each of three soil textures (sand, loam, and clay). These curves, presented in both tabular and graphical form, were chosen as representative of the reported experimental data. Calculations based on these curves showed that the power reflection coefficient and emissivity, unlike skin depth, vary only slightly as a function of frequency and soil texture.
Cihlar, J.↗
Plasma Dispersion Function for the Kappa Distribution
The plasma dispersion function is computed for a homogeneous isotropic plasma in which the particle velocities are distributed according to a Kappa distribution. An ordinary differential equation is derived for the plasma dispersion function and it is shown that the solution can be written in terms of Gauss' hypergeometric function. Using the extensive theory of the hypergeometric function, various mathematical properties of the plasma dispersion function are derived including symmetry relations, series expansions, integral representations, and closed form expressions for integer and half-integer values of K.
Podesta, John J.↗
Characterization of Epoxy Functionalized Graphite Nanoparticles and the Physical Properties of Epoxy Matrix Nanocomposites
This work presents a novel approach to the functionalization of graphite nanoparticles. The technique provides a mechanism for covalent bonding between the filler and matrix, with minimal disruption to the sp2 hybridization of the pristine graphene sheet. Functionalization proceeded by covalently bonding an epoxy monomer to the surface of expanded graphite, via a coupling agent, such that the epoxy concentration was measured as approximately 4 wt.%. The impact of dispersing this material into an epoxy resin was evaluated with respect to the mechanical properties and electrical conductivity of the graphite-epoxy nanocomposite. At a loading as low as 0.5 wt.%, the electrical conductivity was increased by five orders of magnitude relative to the base resin. The material yield strength was increased by 30% and Young s modulus by 50%. These results were realized without compromise to the resin toughness.
Miller, Sandi G.↗
The cluster-cluster correlation function
The clustering properties of the Abell and Zwicky cluster catalogs are studied using the two-point angular and spatial correlation functions. The catalogs are divided into eight subsamples to determine the dependence of the correlation function on distance, richness, and the method of cluster identification. It is found that the Corona Borealis supercluster contributes significant power to the spatial correlation function to the Abell cluster sample with distance class of four or less. The distance-limited catalog of 152 Abell clusters, which is not greatly affected by a single system, has a spatial correlation function consistent with the power law Xi(r) = 300r exp -1.8. In both the distance class four or less and distance-limited samples the signal in the spatial correlation function is a power law detectable out to 60/h Mpc. The amplitude of Xi(r) for clusters of richness class two is about three times that for richness class one clusters. The two-point spatial correlation function is sensitive to the use of estimated redshifts.
Postman, M.↗
Monitoring technology
A process for infrared spectroscopic monitoring of insitu compositional changes in a polymeric material comprises the steps of providing an elongated infrared radiation transmitting fiber that has a transmission portion and a sensor portion, embedding the sensor portion in the polymeric material to be monitored, subjecting the polymeric material to a processing sequence, applying a beam of infrared radiation to the fiber for transmission through the transmitting portion to the sensor portion for modification as a function of properties of the polymeric material, monitoring the modified infrared radiation spectra as the polymeric material is being subjected to the processing sequence to obtain kinetic data on changes in the polymeric material during the processing sequence, and adjusting the processing sequence as a function of the kinetic data provided by the modified infrared radiation spectra information.
Stevenson, William A.↗