Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “formic acid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Flowthrough Pretreatment of Softwood under Water-only and Alkali Conditions

Flowthrough pretreatment provides valuable insight in the fundamentals of deconstruction of plant biomass. In this study, the potential softwood degradation pathways under water-only and alkali conditions were determined by elucidating the deconstructed biomass-derived products at 0-270 °C for 2-10 min at a flow rate of 25 mL/min with water-only or alkaline at initial pH of 8, 9, 11, and 12, respectively. Results indicated that the initial pH value was a convenient indicator along with the severity parameter to control biomass degradation through the non-oxidative (pH<9) and oxidative (pH=9) pathways. Up to 100 % of hemi-sugars, 90 % of cellulose, and 70 % of lignin were derived from softwood under non-oxidative conditions at severity parameter LogR0 around 5.5, respectively. On the contrary, at pH 12, the oxidative degradation resulted in pretreated hydrolysate rich in monomeric and oligomeric phenolic products as well as glycolic acid, acetic acid, and formic acid from carbohydrates. The two dimensional 1H-13C heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) analysis revealed that non-oxidative degradation at initial pH values lower than 9 mainly cleaved ß-O-4, all of the ß-ß, and ß-5/a-O-4 linkages, whereas substantial aromatic ring structures with limited ß-O-4 structures remaining at pH 12 through oxidative degradation.

Zhang, Libing↗
NASA NTRS2002

A Sensitive VLA Search for Small-Scale Glycine Emission Toward OMC-1

We have conducted a deep Q-band (lambda-7 mm) search with the Very Large Array (VLA) toward OMC-1 for the lowest energy conformation (conformer I) of glycine (NH2CH2COOH) in four rotational transitions: the 6(sub 15)- 5(sub 14), 6(sub 24)-5(sub 23), 7(sub 17- 6(sub 16), and 7(sub 07)-6(sub 06). Our VLA observations sample the smallest-scale structures to date in the search for glycine toward OMC-1. No glycine emission features were detected. Thus if glycine exists in OMC-1, either it is below our detection limit, or it is more spatially extended than other large molecules in this source, or it is primarily in its high energy form (conformer II). Our VLA glycine fractional abundance limits in OMC-1 are comparable to those determined from previous IRAM 30m measurements -- somewhat better or worse depending on the specific source model -- and the entire approximately 1 foot primary beam of the VLA was searched while sensitive to an areal spatial scale approximately 150 times smaller than the 24 inch beam of the IRAM single-element telescope. In the course of this work, we detected and imaged the 4(sub 14)-3(sub 13) A and E transitions of methyl formate (HCOOCH3) and also the 2(sub 02) - 1(sub 01) transition of formic acid (HCOOH). Since formic acid is a possible precursor to glycine, our glycine limits and formic acid results provide a constraint on this potential formation chemistry route for glycine in OMC-1.

Hollis, J. M.↗
DOE OSTI2020

Can Isoprene Oxidation Explain High Concentrations of Atmospheric Formic and Acetic Acid over Forests?

Formic and acetic acid concentrations are particularly high over forested areas of the world. However, the gas-phase mechanisms for producing these acids are poorly understood even for isoprene, the globally dominant biogenic hydrocarbon. We quantified formic and acetic acid production from reactions of hydroxyl radical (OH) (between high and low ranges of nitric oxide (NO) levels) with isoprene, methacrolein (MACR), isoprene epoxydiol (IEPOX), isoprene hydroxy hydroperoxide (ISOPOOH), and α-pinene from the focused isoprene experiments at California Institute of Technology (FIXCIT) laboratory chamber study. We find that (i) OH oxidation of MACR, IEPOX, and ISOPOOH are sources of formic acid, (ii) isoprene peroxy radical isomerization and associated photolysis oxidation products are potentially important sources of organic acids, and (iii) high levels of NO generally suppress organic acid formation from OH oxidation of isoprene. We modified existing chemical mechanisms for isoprene oxidation to account for organic acid production pathways observed in the FIXCIT study. We simulated organic acid production during the Southeastern Oxidant and Aerosol Study using the updated chemical mechanisms and represented acetic acid within a factor of 2 but still underpredicted formic acid by a factor of 6. While we cannot explain ambient formic acid with explicit chemical mechanisms, the FIXCIT results suggest that the oxidation of isoprene could account for as much as 70% of the global annual production of formic acid from gas-phase reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Formation of Organic Acids and Carbonyl Compounds in n ‐Butane Oxidation via γ‐Ketohydroperoxide Decomposition

Abstract A crucial chain‐branching step in autoignition is the decomposition of ketohydroperoxides (KHP) to form an oxy radical and OH. Other pathways compete with chain‐branching, such as “Korcek” dissociation of γ‐KHP to a carbonyl and an acid. Here we characterize the formation of a γ‐KHP and its decomposition to formic acid+acetone products from observations of n ‐butane oxidation in two complementary experiments. In jet‐stirred reactor measurements, KHP is observed above 590 K. The KHP concentration decreases with increasing temperature, whereas formic acid and acetone products increase. Observation of characteristic isotopologs acetone‐ d 3 and formic acid‐ d 0 in the oxidation of CH 3 CD 2 CD 2 CH 3 is consistent with a Korcek mechanism. In laser‐initiated oxidation experiments of n ‐butane, formic acid and acetone are produced on the timescale of KHP removal. Modelling the time‐resolved production of formic acid provides an estimated upper limit of 2 s −1 for the rate coefficient of KHP decomposition to formic acid+acetone.

Popolan‐Vaida, Denisia M.↗
DOE OSTI2021

An Evaluation of the Impact of Glycolate and Glycolate Mitigation on the Defense Waste Processing Facility Recycle Diversion Project Flowsheet

The Savannah River Site (SRS) Defense Waste Processing Facility (DWPF) processes radioactive High Level Waste (HLW) sludge solids from the Concentration, Storage, and Transfer Facilities (CSTF); which includes the SRS Tank Farm and Evaporator facilities, and a concentrated Cs-137 laden stream and a Monosodium Titanate (MST) and sludge solids stream from the SRS Salt Waste Processing Facility (SWPF). The waste is chemically adjusted with acids and reductant (currently with 50 wt.% nitric acid and ~90 wt.% formic acid, but eventually formic acid will be substituted with ~70 wt.% glycolic acid), and frit is added so that a durable, borosilicate glass waste form can be produced when the material is vitrified in the melter. As a result of the evaporation of water during both the melter feed preparation and the melter feed vitrification steps in DWPF, a recycle waste stream is generated, neutralized, and sent back to the CSTF. The recycle waste is a dilute aqueous stream originating from the collection of condensate liquids containing some minor sludge, MST, and frit solids and other waste components resulting from melter feed entrainment during foamover events and transfer of volatile species into the condensate. The recycle stream volume is significant and is expected to approach 3 million gallons per year once SWPF reaches full operation, requiring the use of multiple large CSTF tanks for storage. The recycle waste is currently collected in the SRS Tank Farm and periodically evaporated in the 242-16H (2H) Evaporator to conserve storage space.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Formation of Organic Acids and Carbonyl Compounds in $\textit{n}$-Butane Oxidation via γ-Ketohydroperoxide Decomposition

A crucial chain-branching step in autoignition is the decomposition of ketohydroperoxides (KHP) to form an oxy radical and OH. Other pathways compete with chain-branching, such as “Korcek” dissociation of γ-KHP to a carbonyl and an acid. Here we characterize the formation of a γ-KHP and its decomposition to formic acid+acetone products from observations of $\textit{n}$-butane oxidation in two complementary experiments. In jet-stirred reactor measurements, KHP is observed above 590 K. The KHP concentration decreases with increasing temperature, whereas formic acid and acetone products increase. Observation of characteristic isotopologs acetone-$d_3$ and formic acid-$d_0$ in the oxidation of CH 3 CD 2 CD 2 CH 3 is consistent with a Korcek mechanism. In laser-initiated oxidation experiments of $\textit{n}$-butane, formic acid and acetone are produced on the timescale of KHP removal. Further, modelling the time-resolved production of formic acid provides an estimated upper limit of 2 s –1 for the rate coefficient of KHP decomposition to formic acid+acetone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Antifoam Development for Eliminating Flammability Hazards and Decreasing Cycle Time in the Defense Waste Processing Facility

The Savannah River National Laboratory (SRNL) was requested to develop a new antifoam control method for the Defense Waste Processing Facility’s (DWPF) Chemical Process Cell (CPC). SRNL completed testing of both chemical and nonchemical foam controls. The nonchemical foam controls were either ineffective (or worse, created more foam) or impractical (a water spray can control foam, but excessive water is needed). As a result, the focus of this study was on finding a superwetter or commercial antifoam for controlling foam. Thirty potential antifoams were tested as part of this study. A series of tests were developed to help screen out ineffective alternatives including: 1. Spreading testing of superspreaders, 2. Foam column testing with physical simulants, 3. Boiling testing with physical and chemical simulants, 4. Days-only Sludge Receipt and Adjustment Tank (SRAT) process simulations with sludge (containing noble metals and mercury), Precipitate Reactor Feed Tank (PRFT), and Slurry Mix Evaporator Feed Tank (SEFT) simulants in the RC1 Reaction Calorimeter (purchased for antifoam testing), and 5. Around-the-clock SRAT and Slurry Mix Evaporator (SME) process simulations with sludge(containing noble metals and mercury), PRFT, and SEFT simulants in the RC1 Reaction Calorimeter. Evonik Surfynol® MD20, a commercially available defoamer, was relatively effective in controlling foam, while remaining chemically stable in SRAT and SME processing across the pH range of 4 to 13. No degradation products were detected in the offgas, in the condensate or in the SRAT and SME products. In nitric-glycolic acid flowsheet testing, 250 mg/kg Evonik Surfynol® MD20 was needed for foam control compared to 1,625 mg/kg for Antifoam 747, DWPF’s current antifoam. In nitric-formic acid flowsheet testing, 1,125 mg/kg of Evonik Surfynol® MD20 was needed to control foam throughout the SRAT and SME cycles. The commercially available superspreader Momentive™ Y-17112 was even more effective than Evonik Surfynol® MD20 as both a defoamer and an antifoam. Not only was the foam destroyed upon addition but also was less persistent between additions. It was the most effective antifoam in testing using both the nitric-glycolic acid flowsheet and the nitric-formic acid flowsheet. In nitric-glycolic acid flowsheet testing, only 100 mg/kg Momentive™ Y-17112 was needed to control foam throughout the SRAT and SME cycles. In nitric-formic acid flowsheet testing, 300 mg/kg Momentive™ Y-17112 was needed to control foam throughout the SRAT and SME cycles. Momentive™ Y-17112 is also resistant to hydrolysis as demonstrated by its chemical stability in SRAT and SME processing across the pH range of 4 to 13 and lack of degradation products in offgas or condensate. Both candidates were effective as potential replacements for Antifoam 747, with Y-17112 demonstrating superior foam control. During nitric-glycolic flowsheet testing 50% less antifoam was needed when using Momentive™ Y-17112 compared to MD20. During nitric-formic flowsheet testing 75% less antifoam was needed when using Momentive™ Y-17112 compared to MD20. Foam remediated with Momentive™ Y-17112 was less persistent throughout testing. In addition, no degradation products were detected in the offgas, in the condensate or in the SRAT and SME products. Based on this testing, Momentive™ Y-17112 is clearly superior to Evonik Surfynol® MD20 and Antifoam 747, especially for the nitric-formic acid flowsheet processing; it is recommended that Momentive™ Y-17112 replace Antifoam 747 in DWPF. An antifoam addition strategy is recommended for both the nitric-glycolic acid flowsheet and the nitric-formic acid flowsheet. Implementation of Momentive™ Y-17112 is expected to decrease SRAT and SME boiling times by up to 50%, eliminate the issues resulting from Antifoam 747 degradation products, and minimize foamovers. To validate the effectiveness of these defoaming agents, SRNL recommends irradiation of a SRAT or SME product simulant containing fresh antifoam. The goal of this testing is to determine whether the irradiation causes decomposition of the antifoam that would make it less effective or produce new species in the offgas or slurry. This testing began in April 2020. An evaluation should be completed to determine the thermolytic hydrogen and methane generation rate in downstream equipment, including the High-Level Waste evaporators.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Intensified Catalytic Conversion of CO2 into High Value Chemicals

The utilization of CO2 produced from power generation plants as a feedstock for creating new valuable products offers a strategy to reduce GHG emissions, offset carbon capture costs, and facilitate the rebalancing of the carbon cycle. After considering the thermodynamic requirement of potential products from CO2 utilization and their market size, formic acid is a desirable target that offers widespread utility in industrial chemical production and chemical energy storage as a liquid fuel. To effectively utilize CO2 from power generation plants, UK proposes an enhanced bimetallic oxide carbon utilization process (EBOCU) that enables electrochemical CO2 conversion to formic acid. The UK intensified electrocatalytic process combines three main components: 1) a novel bimetallic oxide electrocatalyst; 2) a stable electrochemical reactor using robust electrodes; and 3) a pressurized electrochemical reactor. The output from this project showed the economic viability of producing high-value formic acid from CO2 to both offset the cost associated with post-combustion CCS and reduce GHG emissions. This project developed and screened a series engineered catalysts to selectively reduce CO2 directly to formic acid. The best performing catalyst based on formic acid production, stability, and Faradaic efficiency, was immobilized on carbon electrodes, and tested inside a flow through reactor. After lab-scale testing was completed, the experimental data was used to perform a Life-Cycle Analysis (LCA) and conduct an Initial Technical and Economic Feasibility Study. The LCA showed a pathway to a net negative CO2 utilization process with the incorporation of renewable energy, while the TEA showed the potential to produce formic acid below the current commercial price. The UK EBOCU process was successfully demonstrated at the TRL3 level and has a clear pathway to further development and contribution to the nation’s ambitious decarbonization goals.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Conformer-Dependent Chemistry: Experimental Product Branching of the Vinyl Alcohol + OH + O 2 Reaction

The concentration of formic acid in Earth's tropo-sphere is underestimated by detailed chemical models compared to field observations. Phototautomerization of acetaldehyde to its less stable tautomer vinyl alcohol, followed by the OH-initiated oxidation of vinyl alcohol, has been proposed as a missing source of formic acid that improves the agreement between models and field measurements. Theoretical investigations of the OH + vinyl alcohol reaction in excess O 2 conclude that OH addition to the alpha carbon of vinyl alcohol produces formaldehyde + formic acid + OH, whereas OH addition to the β site leads to glycoaldehyde + HO 2 . Furthermore, these studies predict that the conformeric structure of vinyl alcohol controls the reaction pathway, with the anti-conformer of vinyl alcohol promoting α OH addition, whereas the syn-conformer promotes β addition. However, the two theoretical studies reach different conclusions regarding which set of products dominate. We studied this reaction using time-resolved multiplexed photoionization mass spectrometry to quantify the product branching fractions. Our results, supported by a detailed kinetic model, conclude that the glycoaldehyde product channel (arising mostly from syn-vinyl alcohol) dominates over formic acid production with a 3.6:1.0 branching ratio. Additionally, this result supports the conclusion of Lei et al. that conformer-dependent hydrogen bonding at the transition state for OH-addition controls the reaction outcome. As a result, tropospheric oxidation of vinyl alcohol creates less formic acid than recently thought, increasing again the discrepancy between models and field observations of Earth's formic acid budget.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Photocatalytic Nitrate Destruction Studies in Complex Environments

One method for denitration of nitric acid used in nuclear facilities is to use formic acid as a reductant. The major problem with formic acid denitration is an induction period of varying duration that may result in excessive accumulation of formic acid at the reaction onset. This accumulation poses an off-gas process control issue. In this talk, we will describe the use of titania&#x2;based photocatalysts for the treatment of nitric acid and nitrate wastes. We find that the photocatalytic process is a simple and straightforward method to completely destroy nitrate ions at room temperature without any initiation period.

nanomaterials↗
DOE OSTI2026

Understanding and Mitigating Stickiness in Biochar Produced through Acid Hydrolysis and Dehydration

Levulinic acid is a platform chemical with significant potential for conversion into a wide range of biobased chemicals and fuels. A common process for producing levulinic acid from lignocellulosic feedstocks involves acid hydrolysis and dehydration (AHDH), where hexose polymers are hydrolyzed into monomeric sugars and subsequently dehydrated to levulinic acid and formic acid in the presence of dilute sulfuric acid. However, scaling the AHDH process is challenging because of the formation of byproducts such as sticky biochar, which accumulates in continuous-flow reactors, reducing effective reaction volume and increasing process downtime. This study investigates the effect of a chemical preconditioning step on mitigating sticky biochar formation. Woody biomass was preconditioned at 170 °C with 0.26 wt % sulfuric acid for 30 min, resulting in substantial removal of hemicellulose and acid-soluble lignin. AHDH of these preconditioned solids produced biochar that did not adhere to reactor surfaces. TGA analysis confirmed that the chemical preconditioning step minimized interactions between hemicellulose-derived degradation products and lignin side chains, reducing sticky char formation. Additionally, the study observed a 6% higher yield of organic acids from softwood species compared to hardwoods, with bark content shown to negatively impact yield. These findings suggest that targeted preconditioning of lignocellulosic biomass can enhance reactor operability and improve organic acid production efficiency in AHDH processes.

biopolymers↗
DOE OSTI2023

Emerging concepts in intermediate carbon dioxide emplacement to support carbon dioxide removal

Substantial upscaling of carbon dioxide capture is possible in the coming decades but existing solutions for storage are projected to be limited in annual capacity by as much as 2–10 GtCO 2 per year until mid-century. Temporary storage of CO 2 in a solid or liquid state could prove useful for filling this gap in capacity, until more permanent and ideally lucrative CO 2 sequestration options come online. There are several concepts for reversible solid-state and chemical CO 2 storage, but their advantages and limitations have yet to be reviewed in this context. This article focuses on the physical and chemical aspects of CO 2 storage via liquid and solid chemical carriers and sorbents, and gives an overview of the energetics around their use, as well as prospects for their future development. Exciting opportunities for coupling capture and medium to high maturity multi-year storage technologies could support carbon removal in the coming decades. Highlights of the analysis are the remarkable storage capacity of oxalic acid and formic acid (CO 2 -density of 1857 kg m –3 and 1152 kg m –3 , compared with condensed liquid CO 2 at 993–1096 kg m –3 , respectively), the relative scalability and compatibility of carbonate salts for stationary storage with direct air capture, and the potential promise of multiple carriers for CO 2 transportation. Solid sorbents do not achieve such ultra-high storage capacities, but could improve storage over compressed gas tanks on a capacity and energetics basis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Non-thermal atmospheric pressure plasma–liquid synthesis of organic acids in aqueous solution from carbon monoxide

This work aims at understanding the conversion of CO to organic acids, namely oxalic acid and formic acid, using non-thermal atmospheric pressure plasma over aqueous solutions. CO exhibited significantly higher conversion to organic acids (more than 15×) compared to CO 2 under the same reaction conditions. The result bolsters a proposed two-step process for CO 2 fixation, whereby CO 2 is first converted to CO, and then CO is converted to organic acids. The organic acids produced from CO are intermediates in the water–gas shift (WGS) reaction of CO in the presence of an aqueous solution to dissolved CO 2 and hydrogen gas. Based on a simple thermodynamic analysis, the organic acid yield was increased by lowering the plasma–liquid reaction temperature using an ice bath to cool the reaction flask. The composition of the organic acids could be varied by changing the pH of the solution. Oxalate was formed in higher concentrations with increasing solution pH above the pK a of the radical species (CO 2 )˙ − . Below the pK a value, formate was the exclusive organic acid formed. The production of formate has a rather weak pH dependence but is enhanced slightly at a basic pH above 10. Furthermore, at basic pH, the effect of electrolyte concentration comes into play. Higher electrolyte concentrations, leading to shorter electrolyte Debye lengths, resulted in lowered organic acid yields. The highest yields of organic acids obtained in our system were 122 mg L −1 for oxalate and 77 mg L −1 for formate at an optimum 1 mM NaOH concentration in the starting solution. This work is a successful pioneering example of CO to organic acids conversion using non-thermal plasmas, which opens the pathway for a promising two-step conversion process of CO 2 to organic acids.

Sudagar, Alcina Johnson [Washington University in ↗
NASA NTRS1999

Measurements of Acidic Gases and Aerosol Species Aboard the NASA DC-8 Aircraft During the Pacific Exploratory Mission in the Tropics (PEM-Tropics A)

We received funding to provide measurements of nitric acid (HNO3), formic acid (HCOOH), acetic acid (CH3COOH), and the chemical composition of aerosols aboard the NASA Ames DC-8 research aircraft during the PEM-Tropics A mission. These measurements were successfully completed and the final data resides in the electronic archive (ftp-gte.larc.nasa.gov) at NASA Langley Research Center. For the PEM-Tropics A mission the University of New Hampshire group was first author of four different manuscripts. Three of these have now appeared in the Journal of Geophysical Research-Atmospheres, included in the two section sections on PEM-Tropics A. The fourth manuscript has just recently been submitted to this same journal as a stand alone paper. All four of these papers are included in this report. The first paper (Influence of biomass combustion emissions on the distribution of acidic trace gases over the Southern Pacific basin during austral springtime) describes the large-scale distributions of HNO3, HCOOH, and CH3COOH. Arguments were presented to show, particularly in the middle tropospheric region, that biomass burning emissions from South America and Africa were a major source of acidic gases over the South Pacific basin. The second paper (Aerosol chemical composition and distribution during the Pacific Exploratory Mission (PEM) Tropics) covers the aerosol aspects of our measurement package. Compared to acidic gases, O3, and selected hydrocarbons, the aerosol chemistry showed little influence from biomass burning emissions. The data collected in the marine boundary layer showed a possible marine source of NH3 to the troposphere in equatorial areas. This source had been speculated on previously, but our data was the first collected from an airborne platform to show its large-scale features. The third paper (Constraints on the age and dilution of Pacific Exploratory Mission-Tropics biomass burning plumes from the natural radionuclide tracer Pb-210) utilized the unexpectedly high concentrations of Pb-210 in the combustion plumes to estimate their ages and mixing along the transport route to the South Pacific basin. The final paper in the group (Tropospheric reactive-odd nitrogen over the South Pacific in austral springtime). This paper provides a summary of reactive nitrogen during PEM-Tropics A, with HNO3 and PAM showing the most impact from combustion emission.

Talbot, Robert W.↗
NASA NTRS2017

Chemical Complexity Induced by Efficient Ice Evaporation in the Barnard 5 Molecular Cloud

Cold gas-phase water has recently been detected in a cold dark cloud, Barnard 5 located in the Perseus complex, by targeting methanol peaks as signposts for ice mantle evaporation. Observed morphology and abundances of methanol and water are consistent with a transient non-thermal evaporation process only affecting the outermost ice mantle layers, possibly triggering a more complex chemistry. Here we present the detection of the complex organic molecules (COMs) acetaldehyde (CH3CHO) and methyl formate (CH3OCHO), as well as formic acid (HCOOH) and ketene (CH2CO), and the tentative detection of di-methyl ether (CH3OCH3) towards the ‘methanol hotspot’ of Barnard 5 located between two dense cores using the single dish OSO 20m, IRAM 30m, and NRO 45m telescopes. The high energy cis- conformer of formic acid is detected, suggesting that formic acid is mostly formed at the surface of interstellar grains and then evaporated. The detection of multiple transitions for each species allows us to constrain their abundances through LTE and non-LTE methods. All the considered COMs show similar abundances between ∼ 1 and ∼ 10 % relative to methanol depending on the assumed excitation temperature. The non-detection of glycolaldehyde, an isomer of methyl formate, with a [glycolaldehyde]/[methyl formate] abundance ratio lower than 6 %, favours gas phase formation pathways triggered by methanol evaporation. According to their excitation temperatures derived in massive hot cores, formic acid, ketene, and acetaldehyde have been designated as ‘lukewarm’ COMs whereas methyl formate and di-methyl ether were defined as ‘warm’ species. Comparison with previous observations of other types of sources confirms that lukewarm and warm COMs show similar abundances in low-density cold gas whereas the warm COMs tend to be more abundant than the lukewarm species in warm protostellar cores. This abundance evolution suggests either that warm COMs are indeed mostly formed in protostellar environments and/or that lukewarm COMs are efficiently depleted by increased hydrogenation efficiency around protostars.

astrochemistry – ISM: abundances – ISM: clouds – I↗
NASA NTRS2017

Chemical Complexity Induced by Efficient Ice Evaporation in the Barnard 5 Molecular Cloud

Cold gas-phase water has recently been detected in a cold dark cloud, Barnard 5 located in the Perseus complex, by targeting methanol peaks as signposts for ice mantle evaporation. Observed morphology and abundances of methanol and water are consistent with a transient non-thermal evaporation process only affecting the outermost ice mantle layers, possibly triggering a more complex chemistry. Here we present the detection of the complex organic molecules (COMs) acetaldehyde (CH3CHO) and methyl formate (CH3OCHO), as well as formic acid (HCOOH) and ketene (CH2CO), and the tentative detection of di-methyl ether (CH3OCH3) towards the ''methanol hotspot'' of Barnard 5 located between two dense cores using the single dish OSO 20 m, IRAM 30 m, and NRO 45 m telescopes. The high energy cis-conformer of formic acid is detected, suggesting that formic acid is mostly formed at the surface of interstellar grains and then evaporated. The detection of multiple transitions for each species allows us to constrain their abundances through LTE and non-LTE methods. All the considered COMs show similar abundances between approx. 1 and approx. 10% relative to methanol depending on the assumed excitation temperature. The non-detection of glycolaldehyde, an isomer of methyl formate, with a [glycolaldehyde]/[methyl formate] abundance ratio lower than 6%, favours gas phase formation pathways triggered by methanol evaporation. According to their excitation temperatures derived in massive hot cores, formic acid, ketene, and acetaldehyde have been designated as ''lukewarm'' COMs whereas methyl formate and di-methyl ether were defined as ''warm'' species. Comparison with previous observations of other types of sources confirms that lukewarm and warm COMs show similar abundances in low-density cold gas whereas the warm COMs tend to be more abundant than the lukewarm species in warm protostellar cores. This abundance evolution suggests either that warm COMs are indeed mostly formed in protostellar environments and/or that lukewarm COMs are efficiently depleted by increased hydrogenation efficiency around protostars.

ISM: molecules↗
DOE OSTI2021

Mechanism of methanol synthesis on Ni(110)

Planewave density functional theory (DFT-PW91) calculations are employed to study the methanol synthesis through CO 2 and CO hydrogenation, as well as the two side reactions: the water gas shift (WGS) reaction and formic acid formation, on Ni(110). For the WGS reaction on Ni(110), we find that the redox mechanism is favored over the carboxyl-mediated mechanism. We show that the formate pathway is the dominant one for formic acid formation. For methanol synthesis through CO 2 and CO hydrogenation on Ni(110), our results reveal that the formic-acid- and dioxymethylene-mediated pathways coexist, in contrast to methanol synthesis on Cu(111) where the formic-acid-mediated pathway dominates. We also find that on Ni(110), hydrogenation of CH 2 O* to CH 3 O* and that to CH 2 OH* both contribute to MeOH synthesis. Based on the derived energetics, we ascertain that CH 3 O* hydrogenation to CH 3 OH* is likely the rate-determining step along the CH 3 O* pathway on Ni(110). Remarkably, CH 3 O* hydrogenation can be facilitated by the presence of HCO*, demonstrating the promotional effect of CO. Furthermore, we show that CO also participates in methanol synthesis directly via its hydrogenation to HCO* and further to CH 2 O*. Additional microkinetic modeling by considering feed composition and reaction conditions would provide further mechanistic insights into methanol synthesis on Ni(110).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Abstract for CRADA between National Energy Technology Laboratory and OCO Chem

The National Energy Technology Laboratory (NETL) and OCO Chem (Participant) will collaborate in the development and scaling of electrochemical technologies that convert carbon dioxide (CO 2 ) into formic acid. This CO 2 -derived product is an industrially relevant chemical with various agricultural and industrial applications, as well as an emerging liquid hydrogen carrier 53 g of H 2 per liter. The use of formic acid as a liquid hydrogen carrier eliminates the challenges of long-distance H 2 transport and storage, which could lead to additional use as a precursor in the “green” energy and chemical sectors. Conventional formic acid production relies on carbon-intensive processes that use fossil fuel-derived starting materials. The collaboration will facilitate the deployment of technologies that convert captured CO 2 , water, and excess renewable electricity into carbon-neutral formic acid. The anticipated results will reduce the carbon footprint of conventional industrial processes, allow more sustainable use of our Nation’s fossil energy resources, and advance NETL’s ongoing CO 2 utilization efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗