Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fluctuations response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Broad-band properties of the CfA Seyfert galaxies. III - Ultraviolet variability

A total of 657 archived IUE spectra are used to study the UV variability properties of six members of the CfA Seyfert I galaxy sample. All show strong evidence for continuum and line variations and a tendency for less luminous objects to be more strongly variable. Most objects show a clear correlation at zero lag between UV spectral index and luminosity, evidence that the variable component is an accretion disk around a black hole which is systematically smaller in less luminous sources. No correlation is seen between the continuum luminosity and equivalent width of the C IV, Mg II, and semiforbidden C III emission lines when the entire sample is examined, but a clear anticorrelation is present when only repeated observations of individual objects are considered. This is due to a combination of light-travel time effects in the broad-line region and the nonlinear responses of lines to continuum fluctuations.

Edelson, R. A.↗

Nonlocal and collective relaxation in stellar systems

The modal response of stellar systems to fluctuations at large scales is presently investigated by means of analytic theory and n-body simulation; the stochastic excitation of these modes is shown to increase the relaxation rate even for a system which is moderately far from instability. The n-body simulations, when designed to suppress relaxation at small scales, clearly show the effects of large-scale fluctuations. It is predicted that large-scale fluctuations will be largest for such marginally bound systems as forming star clusters and associations.

Weinberg, Martin D.↗

Asynchronous Message Service Reference Implementation

This software provides a library of middleware functions with a simple application programming interface, enabling implementation of distributed applications in conformance with the CCSDS AMS (Consultative Committee for Space Data Systems Asynchronous Message Service) specification. The AMS service, and its protocols, implement an architectural concept under which the modules of mission systems may be designed as if they were to operate in isolation, each one producing and consuming mission information without explicit awareness of which other modules are currently operating. Communication relationships among such modules are self-configuring; this tends to minimize complexity in the development and operations of modular data systems. A system built on this model is a society of generally autonomous, inter-operating modules that may fluctuate freely over time in response to changing mission objectives, modules functional upgrades, and recovery from individual module failure. The purpose of AMS, then, is to reduce mission cost and risk by providing standard, reusable infrastructure for the exchange of information among data system modules in a manner that is simple to use, highly automated, flexible, robust, scalable, and efficient. The implementation is designed to spawn multiple threads of AMS functionality under the control of an AMS application program. These threads enable all members of an AMS-based, distributed application to discover one another in real time, subscribe to messages on specific topics, and to publish messages on specific topics. The query/reply (client/server) communication model is also supported. Message exchange is optionally subject to encryption (to support confidentiality) and authorization. Fault tolerance measures in the discovery protocol minimize the likelihood of overall application failure due to any single operational error anywhere in the system. The multi-threaded design simplifies processing while enabling application nodes to operate at high speeds; linked lists protected by mutex semaphores and condition variables are used for efficient, inter-thread communication. Applications may use a variety of transport protocols underlying AMS itself, including TCP (Transmission Control Protocol), UDP (User Datagram Protocol), and message queues.

Burleigh, Scott C.↗

Assessing the Variability of Radiation, Water and Energy in the Deep Tropics Over the Last 3 Decades

Global surface energy closure and its variability depends heavily upon the surface radiative energy budget in the deep tropics. A key process observed is the change in convection regimes from disorganized convection to organized deep convection. During these periods an imbalance is observed between energy and water fluxes in terms of energy closure in some atmospheric reanalysis systems, implying that processes are not simulated well. A recent paper by Hsaio et al (2023, pre-published version) found that the transition process has wind shear and longwave cloud radiative feedback signatures. In this presentation, we assess the surface radiative budget in the deep tropics by comparing multiple data products (GEWEX SRB Rel4IP, CERES Ed4.1, ISSCP FH, etc.) and describing the variability across the deep tropics for the period from 1988 to near present. We assess this variability of the radiative flux anomalies (including the net TOA, surface and the atmospheric divergence fluxes) against water vapor divergence, cloud properties (include ISCCP “Weather States, Tselioudis et al. 2021) and larger scale wind shear. We include further analysis contrasting 6 key tropical oceanic regions (Indian Ocean east and west, tropical western, central and eastern Pacific Ocean, and Tropical Atlantic Ocean) and the sensitivity of the fluxes as a function of fluctuations in cloud types in response to various larger scale atmospheric processes (e.g. El Niño, Indian Ocean Dipole). These are contrasted against the modeled radiative fluxes from ERA-5 and MERRA-2. Ocean buoy measurements of radiative fluxes are utilized to help assess data radiative flux uncertainty over the nearly 40 year period. In general, the variability for overlap periods of these various data products agrees well, but there are significant differences in the net fluxes that vary according to the rendering of surface, atmospheric, aerosol and cloud properties. We conclude with recommendations for continuing work.

Radiation budget↗

Exploring Radiation, Water and Energy Closure in Key Deep Tropical Regions Over the Last 3 Decades

The closure of global energy and water budgets at various time scales depends heavily upon the on the processes of water and energy exchange in the deep tropics. A key process observed is the change in convection regimes from disorganized convection to organized deep convection. During these periods an imbalance in key tropical regions is observed of water budget terms between observations and atmospheric reanalysis systems, implying that processes are not simulated well. For instance, periods of imbalance in the water budget may be at least partly attributed to precipitation estimates due to the transition between cloud and precipitation systems in which ice cloud affects microwave radar estimates (Lietmann-Niimi et al. 2024, submitted). A recent paper by Hsaio et al (2023, pre-published version) found that the transition process is characterized by wind shear and longwave cloud radiative feedback signatures as well. This is just one example how these processes also affect the radiative fluxes and thus the energy budget at the TOA. In this presentation, we assess the net radiative budget and components in the deep tropics by comparing multiple data products (GEWEX SRB Rel4IP, CERES EBAF/SYN1deg Ed4.2, ISSCP FH, etc.) and describing the temporal variability of energy balance terms across the deep tropics for the period from 1988 to near present in six key oceanic regions. These six key tropical oceanic regions are West Indian Ocean, the south Indian Ocean east, tropical western, central and eastern Pacific Ocean, and Tropical Atlantic Ocean. In these regions we assess the sensitivity of the fluxes as a function of fluctuations in cloud types in response to various larger scale atmospheric processes (e.g. El Niño, Indian Ocean Dipole). We assess this variability of the radiative flux anomalies (including the net TOA, surface and the atmospheric divergence fluxes) against water vapor divergence, cloud properties (include ISCCP “Weather States, Tselioudis et al. 2021) and larger scale wind shear to assess the uncertainties of energy closure in these regions. These are contrasted against the modeled radiative fluxes from ERA-5 and MERRA-2. Ocean buoy measurements of radiative fluxes are utilized to help assess data radiative flux uncertainty over the nearly 40 year period. In general, the variability for overlap periods of these various data products agrees well, but there are significant differences in the net fluxes that vary according to the rendering of surface, atmospheric, aerosol and cloud properties. These differences also affect closure terms and inferences on systematic uncertainties within the observational estimates. We conclude with recommendations for continuing work

Radiation budget↗

Improved Apparatus for the Measurement of Fluctuations of Air Speed in Turbulent Flow

This report describes recent improvements in the design of the equipment associated with the hot-wire anemometer for the measurement of fluctuating air speeds in turbulent air flow, and presents the results of some experimental investigations dealing with the response of the hot wire to speed fluctuations of various frequencies. Attempts at measuring the frequency of the fluctuations encountered in the Bureau of Standards' 54-inch wind tunnel are also reported. In addition, the difficulties encountered in the use of such apparatus and the precautions found helpful in avoiding them are discussed.

Mock, W C , Jr↗

Critical Climate-Sensitive and Important Grain-Producing Regions: Grain Production/Yield Variations Due to Climate Fluctuations

Ideally, the Crop Country Inventory, CCI, is a methodology for the pre-harvest prediction of large variations in a country s crop production. This is accomplished by monitoring the historical climatic fluctuations, especially during the crop calendar period, in a climate sensitive large crop production region or sub-country, rather than the entire country. The argument can be made that the climatic fluctuations in the climatic sensitive region are responsible for the major annual crop country variations and that the remainder of the country, without major climatic fluctuations for a given year, can be assumed to be a steady-state crop producer. The principal data set that has been used is the Global Climate Mode (GCM) data from the National Center for Environmental Prediction (NCEP), taken over the last half century. As a test of its accuracy, GCM data can and has been correlated with the actual meteorological station data at the station site.

Welker, J. E.↗

Derivation of Aero-Induced Fluctuating Pressure Environments for Ares I-X

A description is given of the external aero-inducted fluctuating pressure model which was fit and anchored to wind tunnel data from the past 40 years. This model is based upon the assumption that the flow around a vehicle can be divided into discrete flow zones with independent fluctuating pressure properties. The model is then used to derive fluctuating pressure environments during ascent for the Ares I-X test vehicle. A sensitivity study of the structural response to the spatial correlation of the fluctuating pressures is also performed.

Yang, Michael Y.↗

Diurnal temperature fluctuation effects on potatoes grown with 12 hr photoperiods

This study was designed to characterize the growth responses of potato (Solanum tuberosum L.) to diurnal temperature fluctuations. Potato plants of two cultivars, Norland and Denali, were grown for 90 days under 12 hr photoperiod in walk-in growth rooms at the University of Wisconsin Biotron. The alternating temperature was 22 C light/14 C dark and compared to a constant 18 C as control. At all temperature regimes vapor pressure deficit was maintained at 0.62 kPa (70% relative humidity [correction of humdidity] at 18 C). Plant height, plant dry weight, tuber dry weight, and harvest index were overall greater under the warm light/cool dark alternating temperatures than under the constant temperature. The differences between temperature treatments were greater for Denali than for Norland. Alternating temperatures increased Denali tuber weights by 25%, but no significant increase was found with Norland. Also the total plant weight was increased over 20% with Denali, but increased with Norland in only one of the two replications of the experiment. This study documents that alternating temperatures are a benefit to some cultivars but may not be of benefit to all cultivars.

NASA Discipline Number 61-10↗

Equatorial wave activity derived from fluctuations in observed convection

The spectrum of equatorial wave activity propagating vertically into the stratosphere is calculated from high-resolution imagery of the global convective pattern. Synoptic Global Cloud Imagery (GCI), constructed from six satellites simultaneously observing the earth, is used to diabatically force the linearized primitive equations. Having resolution of 0.5 deg and 3 h, that imagery captures the dominant scales of organized convection, including several harmonics of the diurnal cycle. Its global coverage with high space-time resolution allows the GCI to represent heating variability and dynamical behavior excited by it over a wide range of scales. The dynamical response above the heating is evaluated globally in terms of a space-time spectrum of Hough modes, one which includes planetary-scale Kelvin waves, Rossby waves, and gravity waves down to the resolution of the GCI. The geopotential response, which is indicative of temperature fluctuations observed by satellite, is very red in frequency. Therefore, planetary-scale waves with periods longer than two days dominate the spectrum of geopotential, while high-frequency gravity waves make a comparatively small contribution. Some 80% of the geopotential variance is accounted for by the Kelvin and gravest-symmetric Rossby modes, while the Rossby-gravity mode is comparatively weak. In horizontal eddy motion, the excited wave spectrum is still dominated by planetary-scale components. However, meridional wind fluctuations associated with the Rossby-gravity mode have variance comparable to that of zonal wind fluctuations associated with the Kelvin mode, even though the Rossby-gravity mode is nearly invisible in the geopotential response. Estimates of tropospheric heating lead to amplitudes and propagation characteristics that are broadly consistent with satellite and radiosonde observations of wave activity in the lower stratosphere. The space-time spectrum of EP flux is significantly whiter than the response in either geopotential or motion. Gravity waves of small scale and high frequency carry a large fraction of the upward flux. Although it dominates eastward variance of geopotential and motion, the Kelvin mode carries only about 50% of the eastward EP flux at phase speeds of 20-40 m/s and only 35% of the total eastward flux transmitted to the stratosphere. The remainder is carried by the gravity wave spectrum, which carries nearly all of the westward flux at phase speeds greater than 20 m/s. The gravity wave spectrum also contributes significantly at phase speeds of 10-20 m/s, where only 25% of the flux is accounted for by zonal wavenumbers less than 20. The broad nature of the gravity wave spectrum suggests its absorption at critical levels will be distributed over a deep layer of the middle atmosphere.

Bergman, John W.↗

Hot-wire accuracy in supersonic turbulence from comparisons with laser-induced fluorescence

A hot-wire anemometer and a new, nonintrusive, laser-induced fluorescence (LIF) technique are used to survey a turbulent boundary layer in a supersonic channel flow at Mach no. 2.06. The purpose is to test the accuracy of using the hot wire to measure the fluctuation amplitudes of static temperature and density in a compressible turbulent flow by comparing the results with independent and direct LIF measurements. Several methods of hot-wire calibration and analysis are applied. With each method, the hot-wire response can be related primarily to fluctuations of mass flux and total temperature, from which fluctuations of static temperature and density are calculated. However, these calculations are shown to be valid only if the fluctuations in static pressure are negligible. The acquisition and the analysis of the hot-wire data are often simplified further by neglecting the effects of fluctuations in total temperature. Comparisons of the fluctuation amplitudes of temperature and density obtained by hot-wire and LIF measurements demonstrate that such assumptions might not always be warranted, even in apparently simple flows.

Logan, Pamela↗

Investigating Response from Attached and Separated Flow Excitations on a Real Launch Vehicle using SEA

Statistical Energy Analysis (SEA) response has been fairly well anchored to test observations for Diffuse Acoustic Field (DAF) loading by others. Meanwhile, not many examples can be found in the literature anchoring the SEA vehicle panel response results to Turbulent Boundary Layer (TBL) fluctuating pressure excitations. This deficiency is especially true for supersonic trajectories such as those required by this nation s launch vehicles. Response and excitation data from vehicle flight measurements gathered during the development flight era of the Space Shuttle have been used in a trial to assess the sensitivity of response analysis to certain known and unknown parameters of the flight. This assessment compares vibration response predictions for TBL excitations produced by the SEA tool to flight measurements. A secondary, but perhaps more important objective, is to provide more clarity concerning the accuracy and conservatism that can be expected from response estimates to TBL-excited vehicle models in SEA. What range of parameters must be included in such an analysis in order to land on the conservative side in response predictions? What is the variability produced in the results with changes in these parameters? The TBL fluid structure loading model used for this study is provided from the SEA module of the commercial code VA One.

Harrison, Phil↗

Climate sensitivity from fluctuation dissipation - Some simple model tests

Leith has suggested that climatic response to change in external forcing parameters of the climate system may be estimated via the fluctuation-dissipation theorem (FDT). The method, which uses the natural fluctuations of the atmosphere to probe its dynamics, is tested here using a twenty-variable truncation model of the barotropic vorticity equation. Dissipative terms are added to the equations, so that the model is pushed away from the region where it is expected to satisfy the FDT. It is found that, even though the FDT is no longer satisfied in every detail, the FDT continues to provide an excellent estimate of the climatic sensitivity of the model.

Bell, T. L.↗

Chain Dynamics in Magnetorheological Suspensions

Magnetorheological (MR) suspensions are composed of colloidal particles which acquire dipole moments when subjected to an external magnetic field. At sufficient field strengths and concentrations, the dipolar particles rapidly aggregate to form long chains. Subsequent lateral cross-linking of the dipolar chains is responsible for a rapid liquid-to-solid-like rheological transition. The unique, magnetically-activated rheological properties of MR suspensions make them ideal for interfacing mechanical systems to electronic controls. Additionally, the ability to experimentally probe colloidal suspensions interacting through tunable anisotropic potentials is of fundamental interest. Our current experimental work has focused on understanding the fluctuations of dipolar chains. It has been proposed by Halsey and Toor (HT) that the strong Landau-Peierls thermal fluctuations of dipolar chains could be responsible for long-range attractions between chains. Such interactions will govern the long-time relaxation of MR suspensions. We have synthesized monodisperse neutrally buoyant MR suspensions by density matching stabilized ferrofluid emulsion droplets with D2O. This allows us to probe the dynamics of the dipolar chains using light scattering without gravitational, interfacial, and polydispersity effects to resolve the short-wavelength dynamics of the dipolar chains. We used diffusing wave spectroscopy to measure these dynamics. The particle displacements at short times that show an independence to the field strength, but at long times exhibit a constrained, sub-diffusive motion that slows as the dipole strength is increased. The experiments are in good qualitative agreement with Brownian dynamics simulations of dipolar chains. Although there have been several important and detailed studies of the structure and interactions in MR suspensions, there has not been conclusive evidence that supports or contradicts the HT model prediction that long-range interactions exist between fluctuating chains of dipolar particles. Resolving this issue would contribute greatly to the understanding of these interesting and important materials. We have begun to test the predictions of the HT model by both examining the dynamics of individual chains and by measuring the forces between dipolar chains directly to accurately and quantitatively assess the interactions that they experience. To do so, we employ optical trapping techniques and video-microscopy to manipulate and observe our samples on the microscopic level. With these techniques, it is possible to observe chains that are fluctuating freely in three-dimensions, independent of interfacial effects. More importantly, we are able to controllably observe the interactions of two chains at various separations to measure the force-distance profile. The techniques also allow us to study the mechanical properties of individual chains and chain clusters. Our work to this point has focused on reversibly-formed dipolar chains due to field induced dipoles where the combination of this chaining, the dipolar forces, and the hydrodynamic interactions that dictate the rheology of the suspensions. One can envision, however, many situations where optical, electronic, or rheological behavior may be optimized with magneto-responsive anisotropic particles. Chains of polarizable particles may have the best properties as they can coil and flex in the absence of a field and stiffen and orient when a field is applied. We have recently demonstrated a synthesis of stable, permanent paramagnetic chains by both covalently and physically linking paramagnetic colloidal particles. The method employed allows us to create monodisperse chains of controlled length. We observed the stability, field-alignment, and rigidity of this new class of materials. The chains may exhibit unique rheological properties in an applied magnetic field over isotropic suspensions of paramagnetic particles. They are also useful rheological models as bead-spring systems. These chains form the basis for our current experiments with optical traps.

Gast, A. P.↗

Brain serotonin and pituitary-adrenal functions

It had been concluded by Scapagnini et al. (1971) that brain serotonin (5-HT) was involved in the regulation of the diurnal rhythm of the pituitary-adrenal system but not in the stress response. A study was conducted to investigate these findings further by evaluating the effects of altering brain 5-HT levels on the daily fluctuation of plasma corticosterone and on the response of the pituitary-adrenal system to a stressful or noxious stimulus in the rat. In a number of experiments brain 5-HT synthesis was inhibited with parachlorophenylalanine. In other tests it was tried to raise the level of brain 5-HT with precursors.

Vernikos-Danellis, J.↗

Investigating Response from Turbulent Boundary Layer Excitations on a Real Launch Vehicle using SEA

Statistical Energy Analysis (SEA) response has been fairly well anchored to test observations for Diffuse Acoustic Field (DAF) loading by others. Meanwhile, not many examples can be found in the literature anchoring the SEA vehicle panel response results to Turbulent Boundary Layer (TBL) fluctuating pressure excitations. This deficiency is especially true for supersonic trajectories such as those required by this nation s launch vehicles. Space Shuttle response and excitation data recorded from vehicle flight measurements during the development flights were used in a trial to assess the capability of the SEA tool to predict similar responses. Various known/measured inputs were used. These were supplemented with a range of assumed values in order to cover unknown parameters of the flight. This comparison is presented as "Part A" of the study. A secondary, but perhaps more important, objective is to provide more clarity concerning the accuracy and conservatism that can be expected from response estimates of TBL-excited vehicle models in SEA (Part B). What range of parameters must be included in such an analysis in order to land on the conservative side in response predictions? What is the sensitivity of changes in these input parameters on the results? The TBL fluid structure loading model used for this study is provided by the SEA module of the commercial code VA One.

Harrison, Phillip↗

Night side electromagnetic response of the moon.

The inductive response of the moon to interplanetary magnetic field fluctuations has been measured by the Apollo 12 lunar surface magnetometer. The dependence of the night side lunar response on frequency in the band from about 0.001 to 0.01 Hz is reported. It is shown that the night side response of the moon is not that of a sphere in vacuum. Instead, hydromagnetic radiation scattered from the moon is strongly confined to the interior of the cavity formed downstream from the moon in the solar wind.

Schubert, G.↗

Some heuristic procedures for analyzing random vibration of nonlinear oscillators.

The stationary response of a lightly damped nonlinear oscillator subjected to wideband random excitation can be examined as an example of thermal equilibrium. It may be assumed that the response consists of a series of free-vibration cycles with small random fluctuations in phase and amplitude. Certain statistical properties of the response can be estimated by averaging corresponding properties of the free vibration with respect to cycle amplitude distributions. Such heuristic procedures for determining the expected frequency and the autocorrelation function of the stationary response are outlined. Some additional results concerning first-passage problems for nonlinear oscillators are included.

Crandall, S. H.↗