Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “feature matching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Artificial Generation of 2-D Fiber Reinforced Composite Microstructures with Statistically Equivalent Features

Fiber reinforced composites are used widely for their high strength and low weight advantages in various aerospace and automotive applications. While their use may be sought after, modeling of these material requires increasing fidelity at the lower scales to capture accurate material behavior under loading. The first steps in creating statistically equivalent models to real life cases is developing a method of rapid evaluation and artificial microstructure generation. The outlined work is capable of tracking microscale fiber positions and determining regions of localized volume fraction extrema (high and low end). Groupings of high and low volume fraction regions are called clusters and their geometry is used to characterize the microstructure. These cluster features can be evaluated for both artificial models and actual scans, allowing correlation to be established which can ultimately be used to regenerate statistically equivalent models. The results of this work show that if one feature is to be correlated, a model can be generated which matches almost exactly. But once more features are equally taken into account, the regeneration loses accuracy.

micromechanics↗
NASA NTRS1995

High Accuracy In-Flight Wavelength Calibration of Imaging Spectrometry Data

Accurate wavelength calibration of imaging spectrometer data is essential if proper atmospheric transmission corrections are to be made to obtain apparent surface reflectance. Accuracies of 0.1 nm are necessary for a 10 nm-sampling instrument in order to match the slopes of the deep atmospheric water vapor features that dominate the 0.7-2.3 micrometer regions. The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) is calibrated in the laboratory to determine the wavelength position and full-width-half-maximum (FWHM) response for each of the 224 channels. The accuracies are limited by the quality of the monochromator used as a source. The accuracies vary from plus or minus to plus or minus 1.5 nm depending on the wavelength region, in general decreasing with increasing wavelength. Green et al. make corrections to the wavelength calibrations by using the known positions of 14 atmospheric absorption features throughout the 0.4-2.5 micrometer wavelength region. These features, having varying width and intensity, were matched to the MODTRAN model with a non-linear least squares fitting algorithm. A complete calibration was developed for all 224 channels by interpolation. Instrument calibration cannot be assumed to be stable to 0.1 nm over a flight season given the rigors of thermal cycling and launch and landing loads. The upcoming sensor HYDICE will require a means for in-flight spectral calibration of each scene because the calibration is both temperature and pressure sensitive. In addition, any sensor using a two-dimensional array has the potential for systematic wavelength shifts as a function of cross-track position, commonly called 'smile'. Therefore, a rapid means for calibrating complete images will be required. The following describes a method for determining instrument wavelength calibration using atmospheric absorption features that is efficient enough to be used for entire images on workstations. This study shows the effect of the surface reflectance on the calibration accuracy and the calibration history for the AVIRIS B spectrometer over the 1992 flight season.

Goetz, Alexander F. H.↗
NASA NTRS1987

The IR emission features - Emission from PAH molecules and amorphous carbon particles

Given the current understanding of polycyclic aromatic hydrocarbons (PAHs), the spectroscopic data suggest that are at least two components which contribute to the interstellar emission spectrum: (1) free molecule-sized PAHs producing the narrow features and (2) amorphous carbon particles (which are primarily composed of an irregular 'lattice' of PAHs) contributing to the broad underlying components. An exact treatment of the IR fluorescence from highly vibrationally excited large molecules demonstrates that species containing between 20 and 30 carbon atoms are responsible for the narrow features, although the spectra match more closely with the spectra of amorphous carbon particles. It is concluded that, since little is known about the spectroscopic properties of free PAHs and PAH clusters, much laboratory work is required along with an observational program focusing on the spatial characteristics of the spectra.

Allamandola, L. J.↗
NASA NTRS1990

A rough-surface thermophysical model for airless planets

A model for determining diurnal temperatures in spherical-section depressions and which encompasses both subsurface heat-flow and direct and scattered sunlight effects is presently applied to the disk-integrated thermal emission of a rough planetary surface with nonzero thermal inertia. Attention is given to the variation with roughness and thermal inertia of the beaming parameter eta, which characterizes zero-phase thermal emission by comparison with a smooth, nonrotating body and is almost independent of albedo for a given surface roughness. The thermal phase curve of Ceres is noted to be well matched by the model features of (1) prograde rotation, (2) 44-deg rms surface slope, and (3) a thermal inertia that is 30 percent of the lunar value.

Spencer, John R.↗
NASA NTRS1992

On ionized napthalene (C10H8(+)) as a carrier of diffuse interstellar bands

A recent laboratory study of ionized napthalene (C10H8(+)) has led to the suggestion that some of the unidentified diffuse interstellar bands may be formed by this molecular ion in the diffuse interstellar medium. In particular, there is a close match between a laboratory feature at 6741 A and a weak diffuse band at 6742 A, and some near-coincidences at other wavelengths. The same laboratory data show that other diffuse bands may be found, including one at 6151 A, if indeed C10H8(+) is responsible. This paper reports a search for the 6151 A feature, with negative results. The derived upper limits appear to be in conflict with the C10H8(+) hypothesis, but may not be, due to uncertainties in the expected width of the predicted interstellar feature, and due to the fact that the observations do not include data on the 6742 A band, so it is not known whether this putative C10H8(+) feature is present in the observed clouds.

Snow, Theodore P.↗
NASA NTRS1994

A HIRES analysis of the FIR emission of supernova remnants

The high resolution (HiRes) algorithm has been used to analyze the far infrared emission of shocked gas and dust in supernova remnants. In the case of supernova remnant IC 443, we find a very good match between the resolved features in the deconvolved images and the emissions of shocked gas mapped in other wavelengths (lines of H2, CO, HCO+, and HI). Dust emission is also found to be surrounding hot bubbles of supernova remnants which are seen in soft X-ray maps. Optical spectroscopy on the emission of the shocked gas suggests a close correlation between the FIR color and local shock speed, which is a strong function of the ambient (preshock) gas density. These provide a potentially effective way to identify regions of strong shock interaction, and thus facilitate studies of kinematics and energetics in the interstellar medium.

Wang, Zhong↗
NASA NTRS1997

8-13 Micron Spectroscopy of Young Stars

We presen 8-13 meu spectra of 23 young stars acquired with the UKIRT CGS3 spectromere, including T Tauri, Herbig Ae/Be, and FU Ori stars. Silicate emission and absorption features can generally be matched with the Trapezium emissivity, by employing simple models to account for optical depth effects.

Infrared Spectra Stars T Tauri↗
NASA NTRSDate not supplied

Snow Depth from AMSR-2 Using Multispectral Satellite Data in an Artificial Neural Network

By using diffusion theory and Monte Carlo lidar radiative transfer simulations, Hu et al. (2022b) has derived snow depth from the first-, second- and third-order moments of the lidar backscattering pathlength distribution. Lu et al. (2022) calculated the snow depth by applying the methods to the satellite ICESat-2 lidar measurements over the Arctic sea ice, as well as land surfaces of Northern Hemisphere. In this paper, an artificial neural network (ANN) algorithm, employing several channels from Advanced Microwave Scanning Radiometer 2 (AMSR-2) and the humidity vertical profiles from Global Modeling and Assimilation Office (GMAO) Goddard Earth Observing System for Instrument Teams (GEOS-IT) product, is trained to determine snow depth identified by time and geolocation matched 2019 ICESat-2 snow-depth data during winter months over the Arctic sea ice. The trained ANN snow-depth was applied to 2018 AMSR-2 clear pixel data, although the algorithms perform reasonably well in thinner clouds. The validation data (different from the training set) of ANN snow depth from AMSR-2 showed a good agreement with time matched and co-located snow-depth values from ICESat-2. The bias was near zero, with mean absolute error (MAE) 0.05 cm and a root-mean-square-error (RMSE) 0.08 cm. Prior applying the trained ANN snow depth to AMSR-2 data, a cloud screening algorithm was developed with a similar approach. A separate ANN cloud mask was trained to determine an AMSR-2 pixel is clear or cloudy with time and geolocation matched 2015 CALIOP Vertical Feature Mask (VFM) over Arctic sea ice. The ANN cloud mask from AMSR-2 under-estimated cloud fraction by 3-6% compared to CALIOP . The additional research is needed to conclusively evaluate the ANN cloud mask accuracy. Finally, this paper will lay the foundation for a sustained long-term snowfall and snow-storm monitoring system. The future Cloud Aerosol LIdar for Global scale Observations of the ocean-Land Atmosphere system (CALIGOLA) mission will provide a means to calculate snow depth from the lidar backscattering pathlength distribution, benefiting from the UV, visible and infrared pulses. With the calculated snow depth as the truth one could develop a machine learning algorithm, as it was done in this paper, using a passive microwave instrument available at that time to generate a wide range of snow depth data, covering extensive spatial areas in the cross-orbit direction.

Neural Network↗
NASA NTRS1991

On the state of the emitter of the 3.3 micron unidentified infrared band - Absorption spectroscopy of polycyclic aromatic hydrocarbon species

Results of absorption measurements indicate that the PAH species responsible for the UIR (unidentified infrared) emission probably exist in a condensed form rather than as isolated molecules. It is shown that the peak absorption of the C-H stretch feature of vapor-phase PAHs occurs at a higher frequency than that of the condensed-phase PAHs and does not match the 3.289-micron interstellar feature. The vapor-phase experiments duplicate the phenomenon of the 3.3-micron profile simplification of PAH in KBr at elevated temperature. This confirms that the change of the profile with temperature is an intrinsic molecular effect, and is not a consequence of matrix (KBr) or condensed state interactions.

Flickinger, Gregory C.↗
NASA NTRS2000

Distinctiveness Maps for Image Matching

Stereo correspondence is hard because different image features can look alike. We propose a measure for the ambiguity of image points that allows matching distinctive points first and breaks down the matching task into smaller and separate subproblems. Experiments with an algorithm based on this measure demonstrate the ensuing efficiency and low likelihood of incorrect matches.

Manduchi, Roberto↗
NASA NTRS1993

Jupiter's winds and Arnol'd's second stability theorem: Slowly moving waves and neutral stability

Since the Voyager encounters in 1979, it has been known that Jupiter's cloud-top zonal winds violate the barotropic stability criterion. A vortex-tube stretching analysis of the Voyager wind data indicates that the more general Charney-Stern stability criterion is also violated. On the other hand, the zonal winds determined by tracking cloud features in Hubble Space Telescope images taken in 1991 precisely match the zonal winds determined by tracking cloud features in Voyager images, and it is hard to understand how a complicated zonal wind profile like Jupiter's could be unstable and yet not change at all in 12 years. In fact, there are at least two unknown ways to violate the Charney-Stern stability criterion and still have a stable flow. The better known of these is called Fjortoft's theorem, or Arnol'd's 1st theorem for the case of large-amplitude perturbations. Although the Fjortoft-Arnol'd theorem has been extended from the quasi-geostrophic equations to the primitive equations, the basic requirement that the potential vorticity be an increasing function of streamfunction is opposite to the case found in Jupiter, where the Voyager data indicate that the potential vorticity is a decreasing function of streamfunction. But this second case is precisely that which is covered by Arnol'd's 2nd stability theorem. In fact, the Voyager data suggest that Jupiter's zonal winds are neutrally stable with respect to Arnol'd's 2nd stability theorem. Here, we analyze the linear stability problem of a one-parameter family of sinusoidal zonal wind profiles that are close to neutral stability with respect to Arnol'd's 2nd stability theorem. We find numerically that the most unstable mode is always stationary, which may help to explain the slowly moving mode 10 waves observed on Jupiter. We find that violation of Arnol'd's 2nd stability theorem is both necessary and sufficient for instability of sinusoidal profiles. However, there appears to be no simple extension of Arnol'd's 2nd stability theorem to the primitive equations. Nevertheless, the primitive growth rates are small, and the primitive system is still governed by the quasi-geostrophic neutral-stability configuration.

Stamp, Andrew P.↗
NASA NTRS1986

Automated matching of pairs of SIR-B images for elevation mapping

During the SIR-B mission in October 1984, a significant number of overlapping synthetic aperture radar (SAR) images of various ground areas was collected. This has offered the first opportunity to perform stereo analyses on images from space that cover large ground areas to determine elevation information. This paper presents the preliminary results of an investigation to obtain elevation data from stereo pairs of SIR-B images. First, the accuracy with which elevation information can be derived from SIR-B image pairs is evaluated theoretically. It is shown that elevation accuracy is a function of the slant range resolution, the incidence angles with which the stereo pair is obtained, the accuracies in spacecraft state estimation, and determination of corresponding pixels in the stereo pair. Next, a hierarchical method is developed to match the corresponding pixels. This method involves iterative removal of local distortions and correlations of pairs of local neighborhoods in the two images. Since it is necessary to perform the matching at every pixel in the image, it is very computationally intensive. Therefore, it has been implemented on the Massively Parallel Processor (MPP) at the Goddard Space Flight Center (GSFC). The MPP's speed permits two iterations of this technique to operate on a pair of 512 x 512 images within 7 s. Results of applying this algorithm of SIR-B images of Mount Shasta, CA, are shown. The matching algorithm performs well in regions of the image with significant features. An approximate elevation image derived from the matching process corresponds to published topographic map data, except for certain obvious discontinuities.

Ramapriyan, H. K.↗
NASA NTRS2008

Mars Ozone Absorption Line Shapes from Infrared Heterodyne Spectra Applied to GCM-Predicted Ozone Profiles and to MEX/SPICAM Column Retrievals

We present the application of infrared heterodyne line shapes of ozone on Mars to those produced by radiative transfer modeling of ozone profiles predicted by general circulation models (GCM), and to contemporaneous column abundances measured by Mars Express SPICAM. Ozone is an important tracer of photochemistry Mars' atmosphere, serving as an observable with which to test predictions of photochemistry-coupled GCMs. Infrared heterodyne spectroscopy at 9.5 microns with spectral resolving power >1,000,000 is the only technique that can directly measure fully-resolved line shapes of Martian ozone features from the surface of the Earth. Measurements were made with Goddard Space Flight Center's Heterodyne instrument for Planetary Wind And Composition (HIPWAC) at the NASA Infrared Telescope Facility (IRTF) on Mauna Kea, Hawaii on February 21-24 2008 UT at Ls=35deg on or near the MEX orbital path. The HIPWAC observations were used to test GCM predictions. For example, a GCM-generated ozone profile for 60degN 112degW was scaled so that a radiative transfer calculation of its absorption line shape matched an observed HIPWAC absorption feature at the same areographic position, local time, and season. The RMS deviation of the model from the data was slightly smaller for the GCM-generated profile than for a line shape produced by a constant-with-height profile, even though the total column abundances were the same, showing potential for testing and constraining GCM ozone-profiles. The resulting ozone column abundance from matching the model to the HIPWAC line shape was 60% higher than that observed by SPICAM at the same areographic position one day earlier and 2.5 hours earlier in local time. This could be due to day-to-day, diurnal, or north polar region variability, or to measurement sensitivity to the ozone column and its distribution, and these possibilities will be explored. This work was supported by NASA's Planetary Astronomy Program.

Fast, Kelly E.↗
NASA NTRS1993

Accessory phases in aubrites: Spectral properties and implications for asteriod 44 NYSA

The reflectance spectra of meteoritic metal, meteoritic troilite and the CR carbonaceous chondrite EET87770 have been measured in order to investigate the causes of the spectral differences between the surface of the E-class asteroid 44 Nysa and the opaque free fraction of the Happy Canyon aubrite meteorite. The data indicate that the spectral differences require the presence of Nysa's surface of a small amount of a spectrally red sloped material, of which metal and troilite are the most reasonable candidates, and a material possessing absorption bands near 0.9 micrometers and 1.8 micrometers. A material similar to the carbonaceous chondrite inclusions found in some aubrites can provide a match to the 0.9 micrometer feature and perhaps the 1.8 micrometer feature. The required abundances of these components depends on whether they are areally distributed or intimately mixed with an enstatite rich material. Based on the petrologic associations seen in aubrites and a series of simulated mineral mixtures, an intimate mixture of 69-92% enstatite and 1-11% metal + troilite and an areal component of 7-20% carbonaceous chondrite type material can provide a reasonable match to the 0.3-2.6 micrometer spectrum of Nysa.

Cloutis, Edward A.↗
NASA NTRS2007

Differential Radiometers Using Fabry-Perot Interferometric Technique for Remote Sensing Determination of Various Atmospheric Trace Gases

New type of remote sensing instrument based upon the Fabry-Perot inte rferometric technique has been developed at NASA's Goddard Space Flight Center. Fabry-Perot interferometry (FPI) is a well known, powerful spectroscopic technique and one of its many applications is to be use d to measure greenhouse gases and also some harmful species in the at mosphere. With this technique, absorption of particular species is me asured and related to its concentration. A solid Fabry-Perot etalon is used as a frequency filter to restrict the measurement to particular absorption bands of the gas of interest. With adjusting the thicknes s of the etalon that separation (in frequency) of the transmitted fri nges can be made equal to the almost constant separation of the gas a bsorption lines. By adjusting the temperature of the etalon, which changes the index of refi-action of its material, the transmission fring es can be brought into nearly exact correspondence with absorption li nes of the particular species. With this alignment between absorption lines and fringes, changes in the amount of a species in the atmosph ere strongly affect the amount of light transmitted by the etalon and can be related to gas concentration. The instrument that we have dev eloped detects the absorption of various atmospheric trace gases in d irect or reflected sunlight. Our instrument employing Fabry-Perot interferometer makes use of two features to achieve high sensitivity. The first is high spectral resolution enabling one to match the width of an atmospheric absorption feature by the instrumental band pass. The second is high optical throughput enabled by using multiple spectral lines simultaneously. For any species that one wishes to measure, thi s first feature is available while the use of multiple spectral features can be employed only for species with suitable spectra and freedom from interfering species in the same wavelength region. We have deve loped an instrument for use as ground based, airborne and satellite s ensor for gases such as carbon dioxide (1570 nm), oxygen (762 nm and 768 nm lines sensitive to changes in oxygen pressure and oxygen temper ature) and water vapor (940 nm). Our current goal is to develop an ul tra precise, inexpensive, ground based device suitable for wide deplo yment as a validation instrument for the Orbiting Carbon Observatory (OCO) satellite. We show sensitivity measurements for CO2, 02, and H2 O, compare our measurements to those obtained using other types of sensors and discuss some of the peculiarities that must be addressed in order to provide the very high quality column detection required for solving problems about global distribution of greenhouse gases and cl imatological models. In another area of research we are interested in developing a small-size channel for CO2 capable of doing simultaneous measurements with the AERONET (Aerosol Robotic Network) at NASA, God dard to study the hypothesis that atmospheric aerosols affect the reg ional terrestrial carbon cycle. We present recent data from our groun d based measurements of O2, CO2, H2O and (13)CO2 and discuss extensio n of the technique to new species and applications.

Georgieva, E. M.↗
NASA NTRS1987

Matching of dissimilar radar images using Marr-Hildreth zero crossings

Two alternatives to the classical method for finding corresponding points in opposite-side synthetic aperture radar imagery are presented. These new methods focus on matching the shapes of large-scale features in the images rather than on correlating high-frequency pixel gray values. One of the methods may be of use in matching radar images to optical images. The large-scale features are extracted using the Marr-Hildreth operator.

Mcconnell, Ross M.↗
NASA NTRS1989

Infrared Emission from Comets

A brief discussion of the infrared observations from 4 to 20 micrometers of seven comets is presented. The observed infrared emission from comets depends primarily on their heliocentric distance. A model based on grain populations composed of a mixture of silicate and amorphous carbon particles in the mass ratio of about 40 to 1, with a power-law size distribution similar to that inferred for comet Halley, is applied to the observations. The model provides a good match to the observed heliocentric variation of both the 10 micrometers feature and the overall thermal emission from comets West and Halley. Matches to the observations of comet IRAS-Araki-Alcock and the antitail of comet Kohoutek require slightly larger grains. While the model does not match the exact profile and position of the 3.4 micrometers feature discovered in comet Halley, it does produce a qualitative fit to the observed variation of the feature's strength as a function of heliocentric distance. The calculations predict that the continuum under the 3.4 micrometers feature is due primarily to thermal emission from the comet dust when the comet is close to the Sun and to scattered solar radiation at large heliocentric distances, as is observed. A brief discussion of the determination of cometary grain temperatures from the observed infrared emission is presented. It is found that the observed shape of the emission curve from about 4 to 8 micrometers provides the best spectral region for estimating the cometary grain temperature distribution.

Swamy, K. S. Krishna↗