Modern traveling-wave tubes for space application.
Traveling wave tubes for high efficiency and extreme environments, discussing power output and RF drive
Dornseif, E. R.↗
SEARCH · Engineering Papers
Results for “extreme wave”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Improved liquid phase epitaxial GaAs for low series resistance Schottky barrier mixer diodes
Millimeter wave Schottky barrier mixer diodes are extremely important devices for radio astronomy. The performance of the Schottky diodes depends largely on the characteristics and quality of the GaAs epitaxial materials used. Systematic manipulation of the liquid phase epitaxial growth conditions and substrate surface treatments has yielded significantly improved surface morphology. Initial problems of high resistivity interfacial layers have been reduced without the use of an in situ etchback. Two-micron diameter Schottky diodes fabricated from epitaxial layers grown at 725 C exhibit a 9-ohm series resistance very near the theoretical minimum.
Binari, S. C.↗
Development of a temperature-compensated hot-film anemometer system for boundary-layer transition detection on high-performance aircraft
A hot-film constant-temperature anemometer (CTA) system was flight-tested and evaluated as a candidate sensor for determining boundary-layer transition on high-performance aircraft. The hot-film gage withstood an extreme flow environment characterized by shock waves and high dynamic pressures, although sensitivity to the local total temperature with the CTA indicated the need for some form of temperature compensation. A temperature-compensation scheme was developed and two CTAs were modified and flight-tested on the F-104/Flight Test Fixture (FTF) facility at a variety of Mach numbers and altitudes, ranging from 0.4 to 1.8 and 5,000 to 40,000 ft respectively.
Chiles, H. R.↗
Development of a temperature-compensated hot-film anemometer system for boundary-layer transition detection on high-performance aircraft
A hot-film constant-temperature anemometer (CTA) system was flight-tested and evaluated as a candidate sensor for determining boundary-layer transition on high-performance aircraft. The hot-film gage withstood an extreme flow environment characterized by shock waves and high dynamic pressures, although sensitivity to the local total temperature with the CTA indicated the need for some form of temperature compensation. A temperature-compensation scheme was developed and two CTAs were modified and flight-tested on the F-104/Flight Test Fixture (FTF) facility at a variety of Mach numbers and altitudes, ranging from 0.4 to 1.8 and 5,000 to 40,000 ft respectively.
Chiles, H. R.↗
A general introduction to aeroacoustics and atmospheric sound
A single unifying principle (based upon the nonlinear 'momentum-flux' effects produced when different components of a motion transport different components of its momentum) is used to give a broad scientific background to several aspects of the interaction between airflows and atmospheric sound. First, it treats the generation of sound by airflows of many different types. These include, for example, jet-like flows involving convected turbulent motions (with the resulting aeroacoustic radiation sensitively dependent on the Mach number of convection) and they include, as an extreme case, the supersonic 'boom' (shock waves generated by a supersonically convected flow pattern). Next, an analysis is given of sound propagation through nonuniformly moving airflows, and the exchange is quantified of energy between flow and sound; while, finally, problems are examined of how sound waves 'on their own' may generate the airflows known as acoustic streaming.
Lighthill, James↗
A general introduction to aeroacoustics and atmospheric sound
A single unifying principle (based upon the nonlinear 'momentum-flux' effects produced when different components of a motion transport different components of its momentum) is used to give a broad scientific background to several aspects of the interaction between airflows and atmospheric sound. First, it treats the generation of sound by airflows of many different types. These include, for example, jet-like flows involving convected turbulent motions (with the resulting aeroacoustic radiation sensitively dependent on the Mach number of convection) and they include, as an extreme case, the supersonic 'boom' (shock waves generated by a supersonically convected flow pattern). Next, an analysis is given of sound propagation through nonuniformly moving airflows, and the exchange is quantified of energy between flow and sound; while, finally, problems are examined of how sound waves 'on their own' may generate the airflows known as acoustic streaming.
Lighthill, James↗
The Effects of Gravity on Combustion and Structure Formation During Synthesis of Advanced Materials
Combustion in a variety of heterogeneous systems, leading to the synthesis of advanced materials, is characterized by high temperatures (2000-3500 K) and heating rates (up to 10(exp 6) K/s) at and ahead of the reaction front. These high temperatures generate liquids and gases which are subject to gravity-driven flow. The removal of such gravitational effects is likely to provide increased control of the reaction front, with a consequent improvement in control of the microstructure of the synthesized products. Thus, microgravity experiments can lead to major advances in the understanding of fundamental aspects of combustion and structure formation under the extreme conditions of the combustion synthesis wave. In addition, the specific features of microgravity environment allow one to produce unique materials, which cannot be obtained under terrestrial conditions. The general goals of the current research are: 1) to improve the understanding of fundamental phenomena taking place during combustion of heterogeneous systems, 2) to use low-gravity experiments for insight into the physics and chemistry of materials synthesis processes, and 3) based on the obtained knowledge, to optimize processing conditions for synthesis of advanced materials with desired microstructures and properties. This research follows logically from the results of investigations we have conducted in the framework of our previous grant on gravity influence on combustion synthesis (CS) of gasless systems. Prior work, by others and by us, has clearly demonstrated that gravity plays an important role during combustion synthesis of materials. The immediate tasks for the future are to quantitatively identify the nature of observed effects, and to create accurate local kinetic models of the processes, which can lead to a control of the microstructure and properties of the synthesized materials. In summary, this is the value of the proposed research. Based on our prior work, we focus on the fundamental aspects of combustion and structure formation under the unique condition of microgravity.
Varma, A.↗
Tether-Induced Airglow: Collisionless Effects
Martinez-Sanchez and Sanmartin [1997] showed that a bare conducting tether can be used as a source of an energetic electron beam. Interacting with the E region atmosphere, the beam should produce airglow thus making possible to deduce the neutral density on a continuous basis. Fujii et al. [2005] suggested that this idea be tested in a specially-designed sounding rocket experiment. We show that collisionless beam-plasma interactions (BPI) complement direct impact, leading to appreciable green-line (557.7 nm) emissions in the F region. In the E region, BPI develops near the entry in the valley, resulting in a narrow layer of strongly-elevated and airglow. Besides, neutralizing electric currents carried by ionospheric electrons in the valley can become unstable or even insufficient to compensate the beam current. Developing plasma waves inhibit neutralizing currents. In the extreme case, the beam might be locked in the valley (the 'virtual cathode'). In addition to optical observations, these effects can also be observed by radiophysical means.
Mishin, E. V.↗
An Update on Experimental Climate Prediction and Analysis Products Being Developed at NASA's Global Modeling and Assimilation Office
The Global Modeling and Assimilation Office at NASA's Goddard Space Flight Center is developing a number of experimental prediction and analysis products suitable for research and applications. The prediction products include a large suite of subseasonal and seasonal hindcasts and forecasts (as a contribution to the US National MME), a suite of decadal (10-year) hindcasts (as a contribution to the IPCC decadal prediction project), and a series of large ensemble and high resolution simulations of selected extreme events, including the 2010 Russian and 2011 US heat waves. The analysis products include an experimental atlas of climate (in particular drought) and weather extremes. This talk will provide an update on those activities, and discuss recent efforts by WCRP to leverage off these and similar efforts at other institutions throughout the world to develop an experimental global drought early warning system.
Schubert, Siegfried↗
Resources at GES DISC for Agriculture Studies
● Introduction to GES DISC (Distributed Active Archive Center- DAAC) ○ Data Holding for Agriculture study ● Resources for Agricultural studies at GES DISC ○ Data Access ○ Data Services and Tools ○ Learning resources : ■ Studying seasonality ■ Studying extreme events: Floods, Flash Floods, Heat Waves, Drought ■ Data Recipe (How-To) ● Demo and hands-on
Zhong Liu↗
A simplified method for thermal analysis of a cowl leading edge subject to intense local shock-wave-interference heating
Type IV shock wave interference heating on a blunt body causes extremely intense heating over a very localized region of the body. An analytical solution is presented to a heat transfer problem that approximates the shock wave interference heating of an engine cowl leading edge of the National Aero-Space Plane. The problem uses a simplified geometry to represent the leading edge. An analytical solution is developed that provides a means for approximating maximum temperature differences between the outer and inner surface temperatures of the leading edge. The solution is computationally efficient and, as a result, is well suited for conceptual and preliminary design or trade studies. Transient and steady state analyses are conducted, and results obtained from the analytical solution are compared with results of 2-D thermal finite element analyses over a wide range of design parameters. Isotropic materials as well as laminated composite materials are studied. Results of parametric studies are presented to indicate the effects of the thickness of the cowl leading edge and the width of the region heated by the shock wave interference on the thermal response of the leading edge.
Mcgowan, David M.↗
Dynamical Mechanisms Underlying the 2022/23 California Flooding: Analysis With A Stationary Wave Model
In late December 2022 and the first half of January 2023, much of California experienced an unprecedented series of atmospheric rivers that produced heavy rains and near-record flooding. Previous work shows that a chain of dynamical events contributed to the extreme precipitation, including the development of a Rossby wave (as a result of forcing linked to the MJO) that emerged from the Indian Ocean in mid-December, and the subsequent development of a persistent positive Pacific North American (PNA) pattern that ultimately directed moisture onto the US West Coast starting in late December. Here, we use a stationary wave model (SWM) to further elucidate the dynamical and thermodynamical processes that drove the aforementioned chain of events. The results reveal the following: 1) The mid-December Rossby wave was likely induced by vorticity stretching and advection in the middle East linked indirectly to the MJO, 2) The initial development of the PNA in late December was triggered by transient and stretching sources of vorticity in the Pacific that were themselves induced by the aforementioned Rossby wave, and 3) The PNA was maintained through mid-January in part by diabatic heating west of Hawaii that was associated with anomalous precipitation influenced by the PNA circulation anomalies, thus representing a feedback on the PNA. One key finding from the SWM analysis is the limited direct role of tropical heating for inducing any of the dynamical mechanisms related to the California extreme event.
Anthony M. DeAngelis↗
Dynamical Mechanisms Underlying the 2022/23 California Flooding: Analysis With A Stationary Wave Model
In late December 2022 and the first half of January 2023, much of California experienced an unprecedented series of atmospheric rivers that produced heavy rains and near-record flooding. Previous work shows that a chain of dynamical events contributed to the extreme precipitation, including the development of a Rossby wave (as a result of forcing linked to the MJO) that emerged from the Indian Ocean in mid-December, and the subsequent development of a persistent positive Pacific North American (PNA) pattern that ultimately directed moisture onto the US West Coast starting in late December. Here, we use a stationary wave model (SWM) to further elucidate the dynamical and thermodynamical processes that drove the aforementioned chain of events. The results reveal the following: 1) The mid-December Rossby wave was likely induced by vorticity stretching and advection in the middle East linked indirectly to the MJO, 2) The initial development of the PNA in late December was triggered by transient and stretching sources of vorticity in the Pacific that were themselves induced by the aforementioned Rossby wave, and 3) The PNA was maintained through mid-January in part by diabatic heating west of Hawaii that was associated with anomalous precipitation influenced by the PNA circulation anomalies, thus representing a feedback on the PNA. One key finding from the SWM analysis is the limited direct role of tropical heating for inducing any of the dynamical mechanisms related to the California extreme event.
Anthony M. DeAngelis↗
Applied Uses of MERRA Reanalyses: Current and Future Prospects
During the initial planning of the Modern Era Retrospective-analysis for Research and Applications (MERRA), the project was envisioned to become a tool for applied sciences and decision makers, as well as weather and climate research. MERRA was the first reanalysis to provide data at 1 hourly frequencies. After discussions with wind energy users, 50m above the surface winds were included in the data collection to begin to represent the environment at the turbine height. MERRA-2 was the first reanalysis to include interactive and assimilated aerosols. From these, PM 1, 2.5 and 10 records have been computed and contribute to the climate and health sector. The US Center for Disease Control is accessing MERRA-2 data for comparison along with their health data. MERRA-2 Extreme Indices have been computed from the high frequency data (e.g. precipitation maxima, heat waves and fire weather). These have been used to characterize the changing extremes in the United States and around the globe as well as the weather associated with the extremes. The next-generation, MERRA-21C, includes increased resolution (25km) and continues to provide innovative Earth system data. For example, a boundary layer collection will provide constant height level data starting at 100m, continuing up to 4000m. This will provide detailed information about the boundary layer processes that greatly affect the biosphere. Chemical tracers for constituents are included in the system. The ensemble data assimilation is run with 32 members, and the variance for critical variables are stored. We will explore the use of this variance as one measure of uncertainty relevant for applied uses, which has not been included in any MERRA reanalysis. We will discuss use case scenarios developed to engage with the energy and financial sectors, to better understand their needs for climate data. Prospects for further downscaling of reanalyses will also be explored.
Michael Bosilovich↗
Target contrast considerations in millimeter wave radiometry for airborne navigation
Target signal requirements for aircraft navigation systems that use radiometric receivers which map thermally emitted power radiated by terrain or power radiated by ground-based beacons are discussed. For selected millimeter wavelength bands, microwaves suffer relatively little degradation by absorption or scattering on passage through the atmosphere, despite extreme weather variations. Interest centers on 8-millimeter waves because of component availability, portability (small size), high image resolution, and all-weather capability at this wavelength. The idea of radiometric airborne navigation is introduced. Elements of radiometry, terrain radiation, and atmospheric transmission characteristics are reviewed. Data pertaining to these elements at 8 mm wavelength are collected. Calculation of radiometric contrasts is discussed for some simple models of terrain targets.
Mayer, A.↗
Turbulent Heat Flux, Downward Longwave Radiation and Large-Scale Atmospheric Circulation Associated with the Wintertime Barents-Kara Sea Extreme Sea Ice Loss Events
We investigate wintertime extreme sea ice loss events on synoptic to subseasonal time scales over the Barents-Kara Sea, where the largest sea ice variability is located. Consistent with previous studies, extreme sea ice loss events are associated with moisture intrusions over the Barents-Kara Sea, which are driven by the large-scale atmospheric circulation. In addition to the role of downward longwave radiation associated with moisture intrusions, which is emphasized by previous studies, our analysis shows strong turbulent heat fluxes are associated with extreme sea ice melting events, with both turbulent sensible and latent heat fluxes contributing, though turbulent sensible heat fluxes dominate. Our analysis also shows that these events are connected to tropical convective anomalies. A dipole pattern of convective anomalies with enhanced convection over the Maritime Continent and suppressed convection over the central to eastern Pacific is consistently detected about 6 to 10 days prior to extreme sea ice loss events. This pattern is associated with either the Madden-Julian Oscillation (MJO) or El Niño–Southern Oscillation (ENSO). Composites show that extreme sea ice loss events are connected to tropical convection via Rossby wave propagation in the midlatitudes. However, tropical convective anomalies alone are not sufficient to trigger extreme sea ice loss events, suggesting that extratropical variability likely modulates the connection between tropical convection and extreme sea ice loss events.
Turbulent heat flux↗
Turbulent Heat Flux, Downward Longwave Radiation, and Large-Scale Atmospheric Circulation Associated with Wintertime Barents–Kara Sea Extreme Sea Ice Loss Events
We investigate wintertime extreme sea ice loss events on synoptic to subseasonal time scales over the Barents–Kara Sea, where the largest sea ice variability is located. Consistent with previous studies, extreme sea ice loss events are associated with moisture intrusions over the Barents–Kara Sea, which are driven by the large-scale atmospheric circulation. In addition to the role of downward longwave radiation associated with moisture intrusions, which is emphasized by previous studies, our analysis shows that strong turbulent heat fluxes are associated with extreme sea ice melting events, with both turbulent sensible and latent heat fluxes contributing, although turbulent sensible heat fluxes dominate. Our analysis also shows that these events are connected to tropical convective anomalies. A dipole pattern of convective anomalies with enhanced convection over the Maritime Continent and suppressed convection over the central to eastern Pacific is consistently detected about 6–10 days prior to extreme sea ice loss events. This pattern is associated with either the Madden–Julian oscillation (MJO) or El Nino–Southern Oscillation (ENSO). Composites show that extreme sea ice loss events are connected to tropical convection via Rossby wave propagation in the midlatitudes. However, tropical convective anomalies alone are not sufficient to trigger extreme sea ice loss events, suggesting that extratropical variability likely modulates the connection between tropical convection and extreme sea ice loss events.
Arctic↗
Electromagnetic Counterparts to Black Hole Mergers
During the final moments of a binary black hole (BH) merger, the gravitational wave (GW) luminosity of the system is greater than the combined electromagnetic (EM) output of the entire observable universe. However, the extremely weak coupling between GWs and ordinary matter makes these waves very difficult to detect directly. Fortunately, the inspirating BH system will interact strongly-on a purely Newtonian level-with any surrounding material in the host galaxy, and this matter can in turn produce unique EM signals detectable at Earth. By identifying EM counterparts to GW sources, we will be able to study the host environments of the merging BHs, in turn greatly expanding the scientific yield of a mission like LISA. Here we present a comprehensive review of the recent literature on the subject of EM counterparts, as well as a discussion of the theoretical and observational advances required to fully realize the scientific potential of the field.
Schnittman, Jeremy D.↗