Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experimental design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Physiological Anatomical Rodent Experiment (PARE) .04 feasibility test 2

The objective of this feasibility study was to subject pregnant rats of the same age, strain, and size that will be utilized in a shuttle flight experiment to all flight conditions except the unique microgravity of space flight and determine the feasibility of the proposed experimental design to meet the experimental objectives. The study utilized facilities at NASA, Ames Research Center, Moffett Field, CA to subject the rats to the gravitational stresses of a simulated shuttle launch and simulated shuttle landing. One hundred pregnant rats were received on gestation day (G) 2 (day 1 = day of vaginal sperm) and on G7, eighty rats were laparotomized to determine the condition of pregnancy and allow assignment to test groups. The five test groups (N=10 each group) were as follows: Group 1, Nominal Flight; Group 2, Laparotomy Control; Group 3, Hysterectomy Control; Group 4, Vivarium Control; Group 5, Delayed Recovery. On G9, animals in groups 1,2,3, and 5 were subjected to a shuttle launch simulation. On G18, groups 1,2, and 3 were subjected to a shuttle landing simulation and on this same day groups 1 and 2 were subjected to unilateral hysterectomy to obtain fetuses and placentas for evaluation. Fetal crown-rump length and fetal weight of the Nominal Flight group was significantly less than the Laparotomy Control group, but placentas were similar. On G20, group 5 was subjected to a shuttle landing simulation and on this day this group received a unilateral hysterectomy and fetuses and placentas were weighed. Animals in all groups were allowed to go to term and all animals delivered between 06:00 hours G22 and 18:00 hours G23. After delivery, a blood sample was taken from each experimental dam, and they were euthanized and the thymus and adrenal glands weighed. The thymus weight from all experimental group dams was decreased relative to the Vivarium Control group but adrenal glands and hormone values in dam plasma was similar in all groups. Pups from experimental groups were tattooed for identification, the anogenital distance of male pups was measured, and all pups placed with foster dams and litter sizes were standardized to 10. There was no difference in anogenital distances between male pups from different test groups. Pups delivered from Delayed Recovery animals were smaller than pups delivered from Nominal Flight animals. On neonatal day 7, all pups were euthanized and pup adrenal glands and thymus weighed. There was no difference in weights of thymus and adrenal glands in pups euthanized at neonatal day 7. Collectively, these data confirm the feasibility of the experimental design to meet objectives of the studies proposed for shuttle flight.

Burden, Hubert W.↗
NASA NTRS1958

Design and experimental investigation of a single-stage turbine with a rotor entering relative Mach number of 2

The design and experimental investigation of a single-stage supersonic turbine are presented herein. The turbine was designed for a rotor entering relative Mach number of 2. The maximum equivalent specific work output of the turbine at design speed and approximately design over-all pressure ratio was 32.9 BTU per pound at a static efficiency of 0.414. This static efficiency gave good verification to an independent reference that indicated theoretical static efficiencies for similar single-stage turbines within the range 0.40 to 0.45. An experimental ratio of effective rotor blade momentum thickness to mean camber length was determined to be 0.0014, which compares favorably with the results obtained from several transonic and subsonic turbines. The design procedure for this turbine would have been improved by allowing for more rotor losses by assuming a value of this momentum parameter comparable with those obtained from transonic turbines. Removing a large portion of the rotor suction surface enabled a lower static pressure to be felt at the stator exit, at the expense of higher rotor losses. The net result was an improvement in turbine work output of about 3 percent at design setting conditions. No problems associated with supersonic starting were encountered even under the worst conditions of turbine operation with respect to this problem.

Moffitt, Thomas P↗
DOE OSTI2025

MINE: a new way to design genetics experiments for discovery

Abstract The Maximally Informative Next Experiment or MINE is a new experimental design approach for experiments, such as those in omics, in which the number of effects or parameters p greatly exceeds the number of samples n (p > n). Classical experimental design presumes n > p for inference about parameters and its application to p > n can lead to over-fitting. To overcome p > n, MINE is an ensemble method, which makes predictions about future experiments from an existing ensemble of models consistent with available data in order to select the most informative next experiment. Its advantages are in exploration of the data for new relationships with n < p and being able to integrate smaller and more tractable experiments to replace adaptively one large classic experiment as discoveries are made. Thus, using MINE is model-guided and adaptive over time in a large omics study. Here, MINE is illustrated in two distinct multiyear experiments, one involving genetic networks in Neurospora crassa and a second one involving a genome-wide association study in Sorghum bicolor as a comparison to classic experimental design in an agricultural setting.

Biochemistry & Molecular Biology↗
NASA NTRS1973

A direct procedure for partitioning scanning workload in control display system design

Experimental eye scanning measurements were made from simulated instrument approaches in a flight-like cockpit representing a contemporary jet transport. The procedure for predicting the partition of the pilot's scanning workload required for monitoring and controlling a task with status displays and a flight director was simplified. When there is but a single director control display, iteration in the preliminary design computations is eliminated. The preliminary design computations are based on predictions of closed-loop input-correlated errors in displayed variables with respect to the trimmed flight values. Methods for predicting multiloop error coherence, and for correcting the predicted partition of scanning workload when the pilot's scanning remnant contribution is significant are included.

Clement, W. F.↗
NASA NTRS1994

Inlet Flow Test Calibration for a Small Axial Compressor Facility. Part 1: Design and Experimental Results

An axial compressor test rig has been designed for the operation of small turbomachines. The inlet region consisted of a long flowpath region with two series of support struts and a flapped inlet guide vane. A flow test was run to calibrate and determine the source and magnitudes of the loss mechanisms in the inlet for a highly loaded two-stage axial compressor test. Several flow conditions and IGV angle settings were established in which detailed surveys were completed. Boundary layer bleed was also provided along the casing of the inlet behind the support struts and ahead of the IGV. A detailed discussion of the flowpath design along with a summary of the experimental results are provided in Part 1.

Miller, D. P.↗
NASA NTRS1992

Design and experimental validation of a flutter suppression controller for the active flexible wing

The synthesis and experimental validation of an active flutter suppression controller for the Active Flexible Wing wind tunnel model is presented. The design is accomplished with traditional root locus and Nyquist methods using interactive computer graphics tools and extensive simulation based analysis. The design approach uses a fundamental understanding of the flutter mechanism to formulate a simple controller structure to meet stringent design specifications. Experimentally, the flutter suppression controller succeeded in simultaneous suppression of two flutter modes, significantly increasing the flutter dynamic pressure despite modeling errors in predicted flutter dynamic pressure and flutter frequency. The flutter suppression controller was also successfully operated in combination with another controller to perform flutter suppression during rapid rolling maneuvers.

Waszak, Martin R.↗
NASA NTRS1991

Active flutter suppression - Control system design and experimental validation

The synthesis and experimental validation of an active flutter suppression controller for the Active Flexible Wing wind-tunnel model is presented. The design is accomplished with traditional root locus and Nyquist methods using interactive computer graphics tools and with extensive use of simulation-based analysis. The design approach uses a fundamental understanding of the flutter mechanism to formulate a simple controller structure to meet stringent design specifications. Experimentally, the flutter suppression controller succeeded in simultaneous suppression of two flutter modes, significantly increasing the flutter dynamic pressure despite errors in flutter dynamic pressure and flutter frequency in the mathematical model. The flutter suppression controller was also successfully operated in combination with a roll maneuver controller to perform flutter suppression during rapid rolling maneuvers.

Waszak, Martin R.↗
NASA NTRS1993

Integrated design and experimental validation of the CSI evolutionary structure

An experimental validation of the optimization-based integrated design methodology performed under the Controls-Structures Interaction (CSI) program for a class of flexible spacecraft is reviewed. The studies have been performed using an integrated design software tool which is under development at the NASA-Langley Research Center. It is analytically and experimentally demonstrated that integrated controls-structures design can yield designs which are substantially superior to those obtained through the traditional sequential approach.

Maghami, P. G.↗
DOE OSTI2025

Boiling Water Capsule Irradiation Test Device Design Study Report

RELAP5 calculations were conducted to support an experimental design, referred to as water capsule, which can facilitate fuel performance testing within ATR. The main objective is to provide useful insights into the experimental design and operating strategies that can mimic LWR operating conditions within the spatial constraints of the ATR position under consideration. This report summarizes the RELAP5 analysis results based on the most recent water capsule design derived through various tests. To discuss a design under conservative conditions, fuel power is consistently assumed to be 400 W/m in all analyses.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2004

Characterization and Uncertainty Analysis of a Reference Pressure Measurement System for Wind Tunnels

This paper presents the calibration results and uncertainty analysis of a high-precision reference pressure measurement system currently used in wind tunnels at the NASA Langley Research Center (LaRC). Sensors, calibration standards, and measurement instruments are subject to errors due to aging, drift with time, environment effects, transportation, the mathematical model, the calibration experimental design, and other factors. Errors occur at every link in the chain of measurements and data reduction from the sensor to the final computed results. At each link of the chain, bias and precision uncertainties must be separately estimated for facility use, and are combined to produce overall calibration and prediction confidence intervals for the instrument, typically at a 95% confidence level. The uncertainty analysis and calibration experimental designs used herein, based on techniques developed at LaRC, employ replicated experimental designs for efficiency, separate estimation of bias and precision uncertainties, and detection of significant parameter drift with time. Final results, including calibration confidence intervals and prediction intervals given as functions of the applied inputs, not as a fixed percentage of the full-scale value are presented. System uncertainties are propagated beginning with the initial reference pressure standard, to the calibrated instrument as a working standard in the facility. Among the several parameters that can affect the overall results are operating temperature, atmospheric pressure, humidity, and facility vibration. Effects of factors such as initial zeroing and temperature are investigated. The effects of the identified parameters on system performance and accuracy are discussed.

Amer, Tahani↗
DOE OSTI2025

Dial

A key step in almost all scientific endeavors is answering the question: Given this data I already collected, what new data do I expect will yield the most useful information toward my scientific objective? The area of (sequential) experimental design has long been investigating answers to this question, but in recent years techniques from the machine learning subfield of active learning are increasingly applied. Researchers need a simple software tool for active learning applied to experimental design that can easily integrate into their existing workflows. This computer code, Dial, provides a microservice in ORNL's INTERSECT ecosystem for active learning applied to experimental design. By being part of the INTERSECT ecosystem, Dial is simple to integrate into any INTERSECT-based workflow. Dial provides multiple backend options, where a backend is an implementation of a specific active learning method. Users can select the backend that performs best for their application. Developers can also add new backends as needed. At its core, Dial receives a set of pre-existing measurements and input parameter bounds and then recommends one or more new sets of parameters to measure. Dial also includes interfaces to other microservices in the INTERSECT ecosystem so that it can be incorporated into INTERSECT campaigns. Dial provides a simple, yet powerful interface to convert automated INTERSECT workflows into autonomous workflows that adapt based on the results that are obtained. A shared microservice for active learning prevents duplicated effort by each application team implementing its own adaptive design of experiments tool.

Drane, Lance [Oak Ridge National Laboratory (ORNL)↗
NASA NTRS1991

The Langley Research Center CSI phase-0 evolutionary model testbed-design and experimental results

A testbed for the development of Controls Structures Interaction (CSI) technology is described. The design philosophy, capabilities, and early experimental results are presented to introduce some of the ongoing CSI research at NASA-Langley. The testbed, referred to as the Phase 0 version of the CSI Evolutionary model (CEM), is the first stage of model complexity designed to show the benefits of CSI technology and to identify weaknesses in current capabilities. Early closed loop test results have shown non-model based controllers can provide an order of magnitude increase in damping in the first few flexible vibration modes. Model based controllers for higher performance will need to be robust to model uncertainty as verified by System ID tests. Data are presented that show finite element model predictions of frequency differ from those obtained from tests. Plans are also presented for evolution of the CEM to study integrated controller and structure design as well as multiple payload dynamics.

Belvin, W. K.↗
NASA NTRS1990

System identification and controller design using experimental frequency response data

Recent findings from modeling and controller design for the NASA-Marshall Single Structure Control Facility have raised questions regarding the ability of modern control design techniques and modern modeling techniques to deal effectively with the stringent modeling and control design requirements of Large Space Structure Control. A brief and general discussion is presented of the results of studies into the modeling and control issues performed under sponsorship of the NASA/ASEE Summer Faculty Fellowship Program. Several issues are addressed. The first is a study of a modeling technique based on least squares identification of individual transfer functions from measured frequency response data. The second is a study of multiobjective optimization techniques applied to the modeling, or system identification, problem. The third issue is a study into the question of whether multiobjective optimization approaches can be effectively used for control system design using only frequency response data, thereby bypassing the difficult modeling problem. The last issue studied involves the resolution of seeming discrepancies between predicted and measured control computer time delays in the Single Structure Control Facility.

Irwin, R. Dennis↗
NASA NTRS1991

Hand controller study of force and control mode

The objectives are to compare and evaluate the utility and effectiveness of various input control devices, e.g., hand controllers, with respect to the relative importance of force and operation control mode (rate or position) for Space Station Freedom (SSF) related tasks. The topics are presented in viewgraph form and include the: Intelligent Research Systems Lab (ISRL) experimental design; Telerobotic Systems Research Laboratory (TSRL) final experimental design; and factor analysis summary of results.

A Terry Morris↗
NASA NTRS1991

Design and experimental evaluation of compact radial-inflow turbines

The application of a multistage 3D Euler solver to the aerodynamic design of two compact radial-inflow turbines is presented, along with experimental results evaluating and validating the designs. The objectives of the program were to design, fabricate, and rig test compact radial-inflow turbines with equal or better efficiency relative to conventional designs, while having 40 percent less rotor length than current traditionally-sized radial turbines. The approach to achieving these objectives was to apply a calibrated 3D multistage Euler code to accurately predict and control the high rotor flow passage velocities and high aerodynamic loadings resulting from the reduction in rotor length. A comparison of the advanced compact designs to current state-of-the-art configurations is presented.

Fredmonski, A. J.↗