Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “evolutionary optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Optimization of Low Reynolds Number Airfoils for Martian Rotor Applications Using an Evolutionary Algorithm

The Mars Helicopter (MH) will be flying on the NASA Mars 2020 rover mission scheduled to launch in July of 2020. Research is being performed at the Jet Propulsion Laboratory (JPL) and NASA Ames Research Center to extend the current capabilities and develop the Mars Science Helicopter (MSH) as the next possible step for Martian rotorcraft. The low atmospheric density and the relatively small-scale rotors result in very low chord-based Reynolds number flows over the rotor airfoils. The low Reynolds number regime results in rapid performance degradation for conventional airfoils due to laminar separation without reattachment. Unconventional airfoil shapes with sharp leading edges are explored and optimized for aerodynamic performance at representative Reynolds-Mach combinations for a concept rotor. Sharp leading edges initiate immediate flow separation, and the occurrence of large-scale vortex shedding is found to contribute to the relative performance increase of the optimized airfoils, compared to conventional airfoil shapes. The oscillations are shown to occur independent from laminar-turbulent transition and therefore result in sustainable performance at lower Reynolds numbers. Comparisons are presented to conventional airfoil shapes and peak lift-to-drag ratio increases between 17% and 41% are observed for similar section lift.

Koning, Witold J.↗
NASA NTRS2018

A Novel Multi-Spacecraft Interplanetary Global Trajectory Optimization Transcription

As the frontier of space exploration continues to advance, so does the design complexity of future interplanetary missions. One avenue of this increasing complexity includes a class of designs known as "Distributed Spacecraft Missions"; missions where multiple spacecraft coordinate to perform shared objectives. Current approaches for the global trajectory optimization of these Multi-Vehicle Missions (MVMs) are prone to shortcomings including laborious iterative design, considerable human-in-the-loop effort, treatment of the multi-vehicle problem as multiple separate trajectory optimization subproblems (resulting in suboptimal solutions where the whole is less than the sum of its parts), and poor handling of coordination objectives and constraints. There are only a handful of software platforms in existence capable of fully-automated, rapid, interplanetary mission and systems global optimization including the Parallel Global Multiobjective Optimizer (PaGMO), the Gravity Assisted Low-thrust Local Optimization Program (GALLOP), and the Evolutionary Mission Trajectory Generator (EMTG). However, none of these tools is capable of performing such tasks for MVM designs. The work outlined in this paper lays the groundwork for a technique to begin addressing these shortcomings. We present a fully-automated technique which frames interplanetary MVMs as Multi-Objective, Multi-Agent Hybrid Optimal Control Problems (MOMA HOCP). First, the basic functionality of this technique is validated on the single-vehicle problem of reproducing the Cassini interplanetary cruise.

Interplanetary↗
NASA NTRS2018

A Novel Multi-Spacecraft Interplanetary Global Trajectory Optimization Transcription

As the frontier of space exploration continues to advance, so does the design complexity of future interplanetary missions. One avenue of this increasing complexity includes a class of designs known as ``Distributed Spacecraft Missions"; missions where multiple spacecraft coordinate to perform shared objectives. Current approaches for the global trajectory optimization of these Multi-Vehicle Missions (MVMs) are prone to shortcomings including laborious iterative design, considerable human-in-the-loop effort, treatment of the multi-vehicle problem as multiple separate trajectory optimization subproblems (resulting in suboptimal solutions where the whole is less than the sum of its parts), and poor handling of coordination objectives and constraints. There are only a handful of software platforms in existence capable of fully-automated, rapid, interplanetary mission and systems global optimization including the Parallel Global Multiobjective Optimizer (PaGMO), the Gravity Assisted Low-thrust Local Optimization Program (GALLOP), and the Evolutionary Mission Trajectory Generator (EMTG). However, none of these tools is capable of performing such tasks for MVM designs. The work outlined in this paper lays the groundwork for a technique to begin addressing these shortcomings. We present a fully-automated technique which frames interplanetary MVMs as Multi-Objective, Multi-Agent Hybrid Optimal Control Problems (MOMA HOCP). First, the basic functionality of this technique is validated on the single-vehicle problem of reproducing the Cassini interplanetary cruise.

Napier, Sean W.↗
NASA NTRS2002

Comparing a Coevolutionary Genetic Algorithm for Multiobjective Optimization

We present results from a study comparing a recently developed coevolutionary genetic algorithm (CGA) against a set of evolutionary algorithms using a suite of multiobjective optimization benchmarks. The CGA embodies competitive coevolution and employs a simple, straightforward target population representation and fitness calculation based on developmental theory of learning. Because of these properties, setting up the additional population is trivial making implementation no more difficult than using a standard GA. Empirical results using a suite of two-objective test functions indicate that this CGA performs well at finding solutions on convex, nonconvex, discrete, and deceptive Pareto-optimal fronts, while giving respectable results on a nonuniform optimization. On a multimodal Pareto front, the CGA finds a solution that dominates solutions produced by eight other algorithms, yet the CGA has poor coverage across the Pareto front.

Lohn, Jason D.↗
NASA NTRS2006

Generative Representations for Computer-Automated Evolutionary Design

With the increasing computational power of computers, software design systems are progressing from being tools for architects and designers to express their ideas to tools capable of creating designs under human guidance. One of the main limitations for these computer-automated design systems is the representation with which they encode designs. If the representation cannot encode a certain design, then the design system cannot produce it. To be able to produce new types of designs, and not just optimize pre-defined parameterizations, evolutionary design systems must use generative representations. Generative representations are assembly procedures, or algorithms, for constructing a design thereby allowing for truly novel design solutions to be encoded. In addition, by enabling modularity, regularity and hierarchy, the level of sophistication that can be evolved is increased. We demonstrate the advantages of generative representations on two different design domains: the evolution of spacecraft antennas and the evolution of 3D objects.

Hornby, Gregory S.↗
NASA NTRS2002

Turbomachinery Airfoil Design Optimization Using Differential Evolution

An aerodynamic design optimization procedure that is based on a evolutionary algorithm known at Differential Evolution is described. Differential Evolution is a simple, fast, and robust evolutionary strategy that has been proven effective in determining the global optimum for several difficult optimization problems, including highly nonlinear systems with discontinuities and multiple local optima. The method is combined with a Navier-Stokes solver that evaluates the various intermediate designs and provides inputs to the optimization procedure. An efficient constraint handling mechanism is also incorporated. Results are presented for the inverse design of a turbine airfoil from a modern jet engine and compared to earlier methods. The capability of the method to search large design spaces and obtain the optimal airfoils in an automatic fashion is demonstrated. Substantial reductions in the overall computing time requirements are achieved by using the algorithm in conjunction with neural networks.

Madavan, Nateri K.↗
NASA NTRS2002

Turbomachinery Airfoil Design Optimization Using Differential Evolution

An aerodynamic design optimization procedure that is based on a evolutionary algorithm known at Differential Evolution is described. Differential Evolution is a simple, fast, and robust evolutionary strategy that has been proven effective in determining the global optimum for several difficult optimization problems, including highly nonlinear systems with discontinuities and multiple local optima. The method is combined with a Navier-Stokes solver that evaluates the various intermediate designs and provides inputs to the optimization procedure. An efficient constraint handling mechanism is also incorporated. Results are presented for the inverse design of a turbine airfoil from a modern jet engine. The capability of the method to search large design spaces and obtain the optimal airfoils in an automatic fashion is demonstrated. Substantial reductions in the overall computing time requirements are achieved by using the algorithm in conjunction with neural networks.

Madavan, Nateri K.↗
NASA NTRS2004

On Improving Efficiency of Differential Evolution for Aerodynamic Shape Optimization Applications

Differential Evolution (DE) is a simple and robust evolutionary strategy that has been proven effective in determining the global optimum for several difficult optimization problems. Although DE offers several advantages over traditional optimization approaches, its use in applications such as aerodynamic shape optimization where the objective function evaluations are computationally expensive is limited by the large number of function evaluations often required. In this paper various approaches for improving the efficiency of DE are reviewed and discussed. These approaches are implemented in a DE-based aerodynamic shape optimization method that uses a Navier-Stokes solver for the objective function evaluations. Parallelization techniques on distributed computers are used to reduce turnaround times. Results are presented for the inverse design of a turbine airfoil. The efficiency improvements achieved by the different approaches are evaluated and compared.

Madavan, Nateri K.↗
DOE OSTI2025

Multi-objective optimization of sustainable aviation fuel production pathways in the U.S. Corn Belt

As a potential source of low-carbon transportation energy, biofuels offer certain advantages over vehicle electrification (e.g., lower societal vulnerability to grid failures, and improved range of sustainable aviation), but also several challenges, including cost, carbon intensity, and land usage. There are also well-founded concerns that biofuel supply chains could be disrupted if extreme weather events impact feedstock yields. In this paper, we explore the use of multi-objective optimization to identify biofuel production pathways that balance cost, greenhouse gas emissions, and supply vulnerability to extreme weather. We compare the use of three different many-objective evolutionary algorithms and linear programming in optimizing biomass cultivation decisions in the U.S. Corn Belt under weather uncertainty using historical, modeled, and synthetic yield data. We consider four feedstock choices (corn, soy, switchgrass, and algae) with two land types (agricultural and marginal lands) and evaluate decisions using three alternative spatial resolutions (ranging from the USDA agricultural district level to the state level). Results show that feedstock choice is the primary driver of objective performance (i.e., the position and shape of 3D, approximate Pareto frontiers). Spatial diversification is a less effective tool in reducing exposure to weather-caused drops in crop yield.

09 BIOMASS FUELS↗
DOE OSTI2021

Initial use of Nek5000/Cardinal to improve closure models in Pronghorn

Heat transfer coefficient closure models for pebble bed reactors are built using a data-driven approach by leveraging the capabilities of an Evolutionary Algorithm entitled Particle Swarm Optimization (PSO). In the present work, the Computational Fluid Dynamics code nekRS was used in order to collect the high-fidelity flow data for a core with 1,568 pebbles. To characterize the heat transfer, multiple concentric regions were considered to extract the physical quantities of interest, e.g./ the Reynolds number. The PSO algorithm is employed as part of an inverse problem targeting determine what are the coefficients for a Nusselt number correlation to match the collected data. Such correlation should follow any given format that is defined a priori. Finally, two correlations are proposed, one with an implicit dependence on the pebbles’ wall temperatures and another expressed as a fully explicit correlation depending on the flow conditions and the position within the core. Anyway, given the generic nature of the proposed approach, correlations following different formats could be tested. Preliminary results for the high-fidelity simulation of a fast MSR core are presented. The target Reynolds number is currently 20K, with the expectation that this will increase, pending the availability of further computational resources. These simulations will be used to inform lower fidelity models, including a coarse CFD turbulence model in Pronghorn. Additionally, they will serve as a reference for the RANS models in Nek5000/NekRS.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Cross-Feeding of a Toxic Metabolite in a Synthetic Lignocellulose-Degrading Microbial Community

The recalcitrance of complex organic polymers such as lignocellulose is one of the major obstacles to sustainable energy production from plant biomass, and the generation of toxic intermediates can negatively impact the efficiency of microbial lignocellulose degradation. Here, we describe the development of a model microbial consortium for studying lignocellulose degradation, with the specific goal of mitigating the production of the toxin formaldehyde during the breakdown of methoxylated aromatic compounds. Included are Pseudomonas putida, a lignin degrader; Cellulomonas fimi, a cellulose degrader; and sometimes Yarrowia lipolytica, an oleaginous yeast. Unique to our system is the inclusion of Methylorubrum extorquens, a methylotroph capable of using formaldehyde for growth. We developed a defined minimal “Model Lignocellulose” growth medium for reproducible coculture experiments. We demonstrated that the formaldehyde produced by P. putida growing on vanillic acid can exceed the minimum inhibitory concentration for C. fimi, and, furthermore, that the presence of M. extorquens lowers those concentrations. We also uncovered unexpected ecological dynamics, including resource competition, and interspecies differences in growth requirements and toxin sensitivities. Finally, we introduced the possibility for a mutualistic interaction between C. fimi and M. extorquens through metabolite exchange. This study lays the foundation to enable future work incorporating metabolomic analysis and modeling, genetic engineering, and laboratory evolution, on a model system that is appropriate both for fundamental eco-evolutionary studies and for the optimization of efficiency and yield in microbially-mediated biomass transformation.

Methylorubrum extorquens↗
NASA NTRS2010

Design of Reflective, Photonic Shields for Atmospheric Reentry

We present the design of one-dimensional photonic crystal structures, which can be used as omnidirectional reflecting shields against radiative heating of space vehicles entering the Earth's atmosphere. This radiation is approximated by two broad bands centered at visible and near-infrared energies. We applied two approaches to find structures with the best omnidirectional reflecting performance. The first approach is based on a band gap analysis and leads to structures composed of stacked Bragg mirrors. In the second approach, we optimize the structure using an evolutionary strategy. The suggested structures are compared with a simple design of two stacked Bragg mirrors. Choice of the constituent materials for the layers as well as the influence of interlayer diffusion at high temperatures are discussed.

Komarevskiy, Nikolay↗
DOE OSTI2021

Unsupervised Resource Allocation with Graph Neural Networks

We present an approach for maximizing a global utility function by learning how to allocate resources in an unsupervised way. We expect interactions between allocation targets to be important and therefore propose to learn the reward structure for near-optimal allocation policies with a GNN. By relaxing the resource constraint, we can employ gradient-based optimization in contrast to more standard evolutionary algorithms. Our algorithm is motivated by a problem in modern astronomy, where one needs to select-based on limited initial information-among $10^9$ galaxies those whose detailed measurement will lead to optimal inference of the composition of the universe. Our technique presents a way of flexibly learning an allocation strategy by only requiring forward simulators for the physics of interest and the measurement process. We anticipate that our technique will also find applications in a range of resource allocation problems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2024

Experimental Results for Mars Rotorcraft Airfoils (roamx-0201 and clf5605) at Low Reynolds Number and Compressible Flow in a Mars Wind Tunnel

Experimental results are obtained for a roamx-0201 type airfoil and the clf5605 airfoil at highsubsonic, low Reynolds number conditions using the Tohoku University Mars Wind Tunnel, Japan. The tests are conducted at a Mach number of M = 0.60, and a Reynolds number of Re = 20,000 to reflect representative aerodynamics of a rotor blade for Mars exploration. The angle of attack is varied between α = −2.0 deg and α = 6.0 deg. The roamx-0201 type airfoil is an unconventional airfoil optimized for the chosen tunnel operating conditions using the Evolutionary aLgorithm for Iterative Studies of Aeromechanics (ELISA), developed under the Rotor Optimization for the Advancement of Mars eXploration (ROAMX) project. ELISA is utilized here to optimize aerodynamic airfoil performance using a Genetic Algorithm and two-dimensional high-fidelity CFD simulations, ultimately resulting in a Pareto-optimal airfoil set. The clf5605 airfoil is the outboard airfoil used on the Ingenuity Mars Helicopter and provides a baseline against which the roamx-0201, as well as possible future airfoil profiles for the compressible low Reynolds number regime, can be compared against. Lift and drag data are recorded using a balance, pressure distributions are obtained using Pressure Sensitive Paint (PSP) application, and Schlieren images are obtained to visualize the flowfield. The data is tabulated to aid future research.

Roamx↗
NASA NTRS1993

Integrated design and experimental validation of the CSI evolutionary structure

An experimental validation of the optimization-based integrated design methodology performed under the Controls-Structures Interaction (CSI) program for a class of flexible spacecraft is reviewed. The studies have been performed using an integrated design software tool which is under development at the NASA-Langley Research Center. It is analytically and experimentally demonstrated that integrated controls-structures design can yield designs which are substantially superior to those obtained through the traditional sequential approach.

Maghami, P. G.↗
DOE OSTI2024

A science-driven approach to optimize the design for a biological small-angle neutron scattering instrument

Biological small-angle neutron scattering (SANS) instruments facilitate critical analysis of the structure and dynamics of complex biological systems. However, with the growth of experimental demands and the advances in optical systems design, a new neutron optical concept is necessary to overcome the limitations of current instruments. This work presents an approach to include experimental objectives ( i.e. the science to be supported by a specific neutron scattering instrument) in the optimization of the neutron optical concept. The approach for a proposed SANS instrument at the Second Target Station of the Spallation Neutron Source at Oak Ridge National Laboratory, USA, is presented here. Further, the instrument is simulated with the McStas software package. The optimization process is driven by an evolutionary algorithm using McStas output data, which are processed to calculate an objective function designed to quantify the expected performance of the simulated neutron optical configuration for the intended purpose. Each McStas simulation covers the complete instrument, from source to detector, including realistic sample scattering functions. This approach effectively navigates a high-dimensional parameter space that is otherwise intractable; it allows the design of next-generation SANS instruments to address specific scientific cases and has the potential to increase instrument performance compared with traditional design approaches.

47 OTHER INSTRUMENTATION↗
NASA NTRSDate not supplied

ELISA: A Tool for Optimization of Rotor Hover Performance at Low Reynolds Number in the Mars Atmosphere

The Evolutionary aLgorithm for Iterative Studies of Aeromechanics (ELISA) was developed in support of the Rotorcraft Optimization for the Advancement of Mars eXploration (ROAMX) project. ELISA was developed to enable aerodynamic rotor hover optimization for low Reynolds number flows in the Mars atmosphere. The first objective of the algorithm allows for unconventional airfoil parameterization and multi-objective airfoil geometry optimization using OVERFLOW. The Pareto-optimal airfoil sets are converted to a set of Pareto-optimal airfoil decks, providing the lowest drag air foil geometry for each angle of attack, removing the need to arbitrarily select the airfoils to be used in the rotor optimization. The second objective allows for rotor geometry optimization with simultaneous maximization of blade loading and minimization of rotor power using the comprehensive analysis CAMRADII. The result is a Pareto-optimal rotor set, providing the lowest power rotor for each attainable blade loading, and one of the first tools for hover-optimized rotors for high-subsonic low Reynolds number conditions. The airfoil thickness can be modified after the airfoil optimization is complete, allowing for a post-airfoil-optimization adjustment of blade thickness to facilitate conforming to external structural analyses requirements. The relevance of the code is demonstrated with case studies for the ROAMX rotor optimization for Ingenuity-sized single rotors in the Mars atmosphere, a performance study optimizing the chord and twist of Ingenuity’s coaxial rotor resulting in the Sample Recovery Helicopters candidate rotor, and high-subsonic low Reynolds number airfoil optimization providing novel insights for higher-efficiency low Reynolds number airfoil geometries and flow physics.

ELISA↗