SEARCH · Engineering Papers

Results for “event identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Studies for the Selection of Fully Contained Muon Neutrino CC Events in the ICARUS T600 Detector at Fermilab

The ICARUS T600 LAr-TPC detector has started its new physics runs in June 2022 at Fermilab within the SBN program. This detector is recording neutrino interactions from the Booster BNB neutrino beam in order to definitively clarify the open questions related to the possible existence of sterile neutrinos, as suggested by numerous observed experimental anomalies. In addition the neutrinos events recorded from the NuMI off-axis beam are under study in order to perform neutrino-Argon cross section measurements. At Fermilab, ICARUS is facing a challenging experimental condition: the detector is presently installed essentially at Earth surface where cosmic ray particles can become a serious source of background for the neutrino event search. This condition makes it necessary to deploy suitable automatic tools for the identification, selection, and measurement of the neutrino events among the millions of events triggered by cosmics. In this contribution, two automatic selection procedures devoted to the identification of fully contained muon neutrino interactions in the BNB neutrino beam will be presented, together with the first results of their application on simulated and on recently recorded events in the T600 detector.

Farnese, Christian [INFN, Padua]↗

DOE OSTI2025

EV-EVSE Fault Study: An Analysis of Thermal Events Caused by Electrical Faults during DC Charging

This report outlines multiple avenues of analysis of electrical faults associated with electric vehicles (EVs) during charging, focusing specifically on the interactions between EVs and EV supply equipment (EVSE). Key concerns include the identification and mitigation of overtemperature events that can result in fires, which are commonly initiated by localized heating of connectors, wiring, or high-impedance fault current paths.

42 - ENGINEERING↗

DOE OSTI2026

Prompt Searches for Very-high-energy γ -Ray Counterparts to IceCube Astrophysical Neutrino Alerts

The search for sources of high-energy astrophysical neutrinos can be significantly advanced through a multimessenger approach, which seeks to detect the γ-rays that accompany neutrinos as they are produced at their sources. Multimessenger observations have so far provided the first evidence for a neutrino source, illustrated by the joint detection of the flaring blazar TXS 0506+056 in high-energy (E > 1 GeV) and very-high-energy (VHE; E > 100 GeV) γ-rays in coincidence with the high-energy neutrino IceCube-170922A, identified by IceCube. Imaging atmospheric Cherenkov telescopes (IACTs), namely FACT, H.E.S.S., MAGIC, and VERITAS, continue to conduct extensive neutrino target-of-opportunity follow-up programs. These programs have two components: follow-up observations of single astrophysical neutrino candidate events (such as IceCube-170922A), and observation of known γ-ray sources after the identification of a cluster of neutrino events by IceCube. Here we present a comprehensive analysis of follow-up observations of high-energy neutrino events observed by the four IACTs between 2017 September (after the IceCube-170922A event) and 2021 January. Our study found no associations between γ-ray sources and the observed neutrino events. We provide a detailed overview of each neutrino event and its potential counterparts. Furthermore, a joint analysis of all IACT data is included, yielding combined upper limits on the VHE γ-ray flux.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Production and validation of scintillating structural components from low-background Poly(ethylene naphthalate)

Poly Ethylene Naphthalate (PEN) is an industrial polymer plastic which is investigated as a low background, transparent, scintillating and wavelength shifting structural material. PEN scintillates in the blue region and has excellent mechanical properties both at room and cryogenic temperatures. Thus, it is an ideal candidate for active structural components in experiments for the search of rare events like neutrinoless double-beta decay or dark matter recoils. Such optically active structures improve the identification and rejection efficiency of backgrounds events, like this improving the sensitivity of experiments. This paper reports on the production of radiopure and transparent PEN plates These structures can be used to mount germanium detectors operating in cryogenic liquids (LAr, LN). Thus, as first application PEN holders will be used to mount the Ge detectors in the LEGEND-200 experiment. The whole process from cleaning the raw material to testing the PEN active components under final operational conditions is reported.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

Bubbles in US gasoline prices: Assessing the role of hurricanes and anti–price gouging laws

This paper examines the presence of bubbles — price changes that cannot be attributed to market fundamentals — in weekly US retail gasoline prices for ten US cities, and whether these bubbles are affected by hurricane events and anti–price gouging laws. Rolling-window, right-tailed unit root tests were used to identify and date bubbles. The analysis found 6 to 22 bubbles, lasting 4 weeks or longer, in city-level retail gasoline prices between 2000 and 2017. A linear regression model of the adjustment speed coefficients from the bubble identification step found that hurricane events increase the rate of price explosivity (or slow the rate of return to equilibrium) following a shock. Furthermore, the regression estimates also imply that state anti–price gouging laws can counteract these effects.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2025

BLADE: An Automated Framework for Classifying Light Curves from the Center for Near-Earth Object Studies Fireball Database

Fireballs (bolides) are high-energy luminous phenomena produced when meteoroids and small asteroids enter Earth’s atmosphere at hypersonic speeds, often resulting in fragmentation or complete disintegration accompanied by significant energy release. The resulting bolide light curves capture temporal brightness variations as these objects traverse increasingly dense atmospheric layers, providing essential information on meteoroid entry dynamics, fragmentation behavior, and atmospheric energy deposition processes. The Center for Near-Earth Object Studies’ (CNEOS) continuously expanding fireball database offers a globally comprehensive archive of bolide events, including light curves and associated metadata. Events associated with infrasound detections allow direct correlations between acoustic signatures and light curve features, therefore enabling detailed analyses of fragmentation dynamics and energy deposition. Here, we introduce Bolide Light-curve Analysis and Discrimination Explorer (BLADE), a robust and high-fidelity framework specifically designed to analyze bolide light curves for objects detected from space. BLADE incorporates a processing pipeline integrating Savitzky–Golay filtering, prominence-based peak detection, and gradient analysis, enabling systematic identification and classification of fragmentation events and their associated energy release characteristics. Preliminary results demonstrate that BLADE reliably distinguishes distinct bolide behaviors, providing an objective, scalable methodology for characterization and analysis of large bolide light curve data sets. This foundational work establishes a novel pathway for advanced bolide research, with promising applications in planetary defense and global atmospheric monitoring. Future research should adopt an integrative approach combining CNEOS optical data with complementary infrasound measurements, further clarifying relationships between bolide energy deposition and acoustic signatures, thus refining our understanding of meteoroid and asteroid atmospheric entry processes.

Asteroids↗

DOE OSTI2026

A Cryogenic Muon Tagging System Integrated with a Superconducting Qubit Device for Radiation-Induced Error Mitigation

Superconducting qubits are highly sensitive to ionizing radiation, which can induce correlated errors and limit scalable fault-tolerant quantum computing. In particular, cosmic-ray muons can deposit energy in the substrate, generating phonon bursts that break Cooper pairs and produce quasiparticles, leading to correlated decoherence events across multiple qubits. We present the development of a cryogenic muon tagging system based on Kinetic Inductance Detectors (KIDs) and its integration with superconducting quantum hardware. Originally developed within the ACE-SuperQ project and validated as a standalone detector, the system demonstrated a muon tagging efficiency of approximately 90% and excellent agreement with Monte Carlo simulations. Building on this validation, the tagging system has been integrated with a multi-qubit superconducting chip operated in a dilution refrigerator. The detector configuration consists of a multi-layer KID stack arranged above and below the quantum device, enabling time-coincident identification of muon-induced events within the same cryogenic environment. The integrated setup has been successfully commissioned, enabling simultaneous operation of the qubit chip and the muon tagging system. A first measurement campaign has been carried out, and preliminary data show time-correlated events between the muon tagging detectors and the qubit readout. A quantitative analysis of radiation-induced effects on qubit performance is currently ongoing. This work represents a step toward the implementation of event-level radiation tagging as a tool for characterizing and potentially mitigating correlated errors in superconducting quantum processors, while establishing a modular platform for future studies at the interface between particle physics and quantum information science.

Roy, Tanay [Fermilab] (ORCID:000000019442862X)↗

DOE OSTI2021

The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing

During laser powder bed fusion additive manufacturing, laser power absorption is governed by a pro -tean pool of molten metal that can present as a highly reflective surface, a deeply absorbing cavity, or some amalgamation thereof. These melt pool dynamics have been linked to defect creation, porosity, and surface finish quality. Although these are therefore critical for determining final part quality, their in-stantaneous influence on laser absorption have only been explored through simulation. To date, direct real-time observations have been elusive due to the locally extreme environment. In this work, we fo-cus a laser on Ti-6Al-4V powder and bare plate while quantifying the time-dependent, absolute energy absorption by monitoring omnidirectional backscattered laser intensity. We also simultaneously record the projective melt pool geometries with high-speed synchrotron x-ray imaging. We find that laser ab-sorption strongly reflects the stability of the vapor depression over a wide range of applied laser powers, oxygen content in the processing atmosphere, and with the presence of powder. During laser scanning of a powder bed surface, we find a significant absorption reduction after 400 mu s due to a dramatic change in the vapor depression aspect ratio-an event known to create porosity. Furthermore, as several industrial scan strate-gies necessitate thousands of these events during a build, their identification and control is of significant practical importance. Lastly, a normalized enthalpy model is demonstrated to be effective in quantifying the relationship between the laser absorption and cavity depth, even under transient conditions. In addi-tion to providing vital quantitative data for simulation calibration, the correlation of melt pool geometry with laser absorption during realistic processing conditions suggests the use of a total backscattered light detection system for real-time process control.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Parallel-plate avalanche counters for heavy-ion beam tracking: History and mysteries

Despite being an old detector concept, position-sensitive parallel-plate avalanche counters (PPACs) remain widely used today for heavy-ion position and timing measurements. In modern rare isotope beam facilities and large-acceptance fragment separators, PPACs are used to characterize beam properties (diagnostics), facilitate beam delivery (tuning), and provide event-by-event beam tracking for particle identification (PID). Most popular particle localization methods in PPAC detectors are based on strip electrodes electrically connected to resistive-chain circuits or delay lines. More exotic systems include optical readouts based on recording electroluminescence light with high-granularity photodetector arrays or high-resolution resistive anode electrodes. PPACs with conventional resistive-chain or delay-line readouts achieve typical position and time resolutions of below 1 mm ( σ ) and around 150 ps ( σ ), respectively. In addition, delay-line systems are capable of counting rates above several hundred kHz for beam areas of a few millimeters square, and around 1 MHz for larger beam sizes. Resistive-chain readouts have limited rates of a few tens of kHz. A review of the operation principles and performance of PPAC detectors is presented in this paper. We will discuss decades-long experience building and operating PPACs developed at the National Superconducting Cyclotron Laboratory, and then refined at the Facility for Rare Isotope Beams (FRIB), mostly focusing on the delay-line readout technique (DLPPAC). We will also discuss problems that arise due to electric discharges at high rates and briefly describe ongoing developments at FRIB. Published by the American Physical Society 2024

Physics↗

DOE OSTI2026

Nuclear recoil detection with color centers in bulk lithium fluoride

We present initial results on the detection of nuclear recoils in lithium fluoride (LiF) through the fluorescence of color centers created by particle interactions in the crystal lattice. Using light-sheet fluorescence microscopy, we image nuclear recoil tracks from both fast and thermal neutron interactions deep within a cubic-centimeter-scale sample. Automated three-dimensional feature extraction based on machine-learning tools enables the identification and classification of individual events. We observe that the fluorescence response of LiF to gamma irradiation is strongly suppressed, by a factor of 30–50 compared to neutron exposure, demonstrating intrinsic insensitivity to electromagnetic backgrounds. The observed and simulated event characteristics are consistent, including their number, size, and topology. These results establish the feasibility of LiF as a scalable detection medium for rare nuclear-recoil events and constitute a first step toward 10–1000 g scale detectors with single-event sensitivity for applications in reactor-neutrino detection, neutron spectroscopy, and dark matter searches.

Aroujo, G R [University of Zurich]↗

DOE OSTI2024

SRF Cavity Instability Detection with Machine Learning at CEBAF

During the operation of the Continuous Electron Beam Accelerator Facility (CEBAF), one or more unstable superconducting radio-frequency (SRF) cavities often cause beam loss trips while the unstable cavities themselves do not necessarily trip off. The present RF controls for the legacy cavities report at only 1 Hz, which is too slow to detect fast transient instabilities during these trip events. These challenges make the identification of an unstable cavity out of the hundreds installed at CEBAF a difficult and time-consuming task. To tackle these issues, a fast data acquisition system (DAQ) for the legacy SRF cavities has been developed, which records the sample at 5 kHz. A Principal Component Analysis (PCA) approach is being developed to identify anomalous SRF cavity behavior. We will discuss the present status of the DAQ system and PCA model, along with initial performance metrics. Overall, our method offers a practical solution for identifying unstable SRF cavities, contributing to increased beam availability and machine reliability.

Carpenter, A.↗

DOE OSTI2020

Exploratory Efforts to Constrain Geologic Material Properties from Remote Sensing Data: Joint Study (FY2020 Final Report)

Identification and characterization of underground events from surface or remote data requires a thorough understanding of the rock material properties. However, material properties usually come from borehole data, which is expensive and not always available. A potential alternative is to use topographic characteristics to approximate the strength, but this has never been done before quantitatively. Here we present the results from the first steps towards this goal. We have found that there are strong correlations between compressive and tensile strengths and slopes, but these correlations vary depending on data analysis details. Rugosity may be better correlated to strength than slope values. More comprehensive analyses are needed to fully understand the best method of predicting strength from topography for this area. We also found that misalignment of multiple GIS datasets can have a large influence on the ability to make interpretations. Lastly, these results will require further study in a variety of climatic conditions before being applicable to other sites.

58 GEOSCIENCES↗

DOE OSTI2021

Exploratory Efforts to Constrain Geologic Material Properties from Remote Sensing Data: A Joint Study

42 ENGINEERING↗

DOE OSTI2024

SRF Cavity Instability Detection with Machine Learning at CEBAF

Carpenter, A.↗

DOE OSTI2025

SRF cavity instability detection with machine learning at CEBAF

During the operation of the Continuous Electron Beam Accelerator Facility (CEBAF), one or more unstable superconducting radio-frequency (SRF) cavities often cause beam loss trips while the unstable cavities themselves do not necessarily trip off. The present RF controls for the legacy cavities report at only 1 Hz, which is too slow to detectfast transient instabilities during these trip events. These challenges make the identification of an unstable cavity out of the hundreds installed at CEBAF a difficult and time-consuming task. To tackle these issues, a fast data acquisition system (DAQ) for the legacy SRF cavities has been developed, which records the sample at 5 kHz. An unsupervised learning framework has been developed to identify anomalous SRF cavity behavior. We will discuss the present status of the DAQ system and our framework, along with recent successes in detecting anomalous cavity behavior. Overall, our method offers a practical solution for identifying unstable SRF cavities, contributing to increased beam availability and machine reliability.

Accelerator Physics↗

DOE OSTI2021

Identification and analysis of quasielastic neutrino interactions at MicroBooNE

The study of neutrino oscillations and the extraction of high-accuracy neutrino mixing angles, CP phases, and mass differences, are at the forefront of the worldwide current experimental physics research. Neutrino experiments aim towards a high-precision extraction of these parameters, which requires a good knowledge of the interaction with the detector and target materials. In the energy range most relevant for oscillation studies ($E_\nu \sim$ 0.3 to 3 GeV), the dominant neutrino nucleus interaction is quasi-elastic (QE) scattering. Charged-current quasielastic (CCQE) scattering is the process by which the neutrino produces a charged lepton and removes a single intact nucleon from the nucleus, without producing any additional particles. It is one of the simplest lepton--nucleus interactions in the energy regime relevant for neutrino oscillation experiments. This thesis describes the identification and analysis of CCQE events in a data sample collected in the MicroBooNE detector at Fermilab during 2016; It discusses the isolation of the signal and the background rejection, as well as the extraction of the exclusive flux--integrated cross--sections for neutrino CCQE scattering off argon, $\nu_{\mu} + ^{40}$Ar$\to \mu^{-} + p$, as a function of the kinematics of the outgoing particles emerging from the interaction. We extracted $ \frac{d\sigma}{dp_{\mu}}, \frac{d\sigma}{d\cos\theta_{\mu}}, \frac{d\sigma}{d\phi_{\mu}}$, and $ \frac{d\sigma}{dp_{p}}, \frac{d\sigma}{d\cos\theta_{p}}, \frac{d\sigma}{d\phi_{p}}$. Here $p_p$,$\theta_{p}$,$\phi_p$ ($p_\mu$,$\theta_{\mu}$,$\phi_\mu$) are the momentum and scattering angles of the outgoing proton (muon). The data are in good agreement with predictions of GENIE, the standard event generator used for neutrino oscillation studies. The data confirms and constrains calcu lations essential for the extraction of oscillation parameters.

Cohen, Erez O.↗

DOE OSTI2022

Utilization of the LMP Methodology in Support of the VTR Conceptual Safety Design Report

The Versatile Test Reactor (VTR) is a fast spectrum test reactor currently being developed in the United States under the direction of the US Department of Energy (DOE), Office of Nuclear Energy. The VTR is utilizing a risk-informed performance-based (RIPB) approach for design support and authorization by the DOE, derived from recent efforts by the US industry led Licensing Modernization Project (LMP). This document contains an overview of the implementation of the LMP approach in support of the VTR Conceptual Safety Design Report (CSDR). The work reported here is the result of studies supporting a VTR conceptual design, cost, and schedule estimate for DOE-NE to make a decision on procurement. As such, it is preliminary. The VTR RIPB authorization approach utilizes information from the probabilistic risk assessment (PRA), coupled with deterministic analyses, to aid in decision-making regarding the identification and categorization of safety basis events (SBEs), the classification of structures, systems, and components (SSCs), and the evaluation of defense-in-depth (DID) adequacy. As part of initial reactor design efforts, a VTR conceptual design PRA was developed to support the RIPB process, which focused on at-power internal events, with scoping analyses for seismic and sodium fire hazards. In addition to supporting numerous design studies, preliminary results from the RIPB approach and the VTR conceptual design PRA were utilized as the basis of the VTR CSDR. The initial identification and categorization of SBEs, SSC classification, and DID evaluation were contained within the CSDR, which was submitted to DOE in 2019 as part of the CD-1 submittal package. Following review, DOE approved the CSDR in April 2020 and the CD-1 package in late 2020. Valuable experience was gained through the implementation of the RIPB approach for design and authorization during the VTR conceptual design phase, which is summarized in this document. To the extent possible, this experience has been shared with the advanced reactor industry, through publications and participation in licensing tabletops, in addition to informing DOE:NE advanced reactor regulatory development efforts. Furthermore, the approval of the CSDR by the DOE as part of CD-1 represents a significant milestone in the use of RIPB approaches for advanced reactor licensing.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2020

The CLAS12 Forward Time-of-Flight system

The Forward Time-of-Flight system for the large-acceptance CLAS12 spectrometer in Hall B at the Thomas Jefferson National Accelerator Facility is described. The system is positioned at distances in the range from 6.2 m to 7.2 m from the beam–target interaction point and spans laboratory polar angles from 5 deg → 45 deg and nearly the full azimuth. The system consists of 540 individual scintillation counters with double-ended readout that range in length from 17 cm to 426 cm of discrete widths of 6 cm, 15 cm, and 22 cm, and of discrete thicknesses of 5 cm and 6 cm. We see the effective counter time resolution for passing charged particles varies from 50 ps for the shortest counters at small angles to 200 ps for the longest counters at large angles. The detectors are part of the forward-angle particle identification system for CLAS12 during offline event reconstruction and are a component of the online data acquisition trigger to select final state event topologies with forward-going charged particles.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗