Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “euler equat”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

A Newton multigrid method for the Euler equations

A multigrid method is used to apply Newton's method to the Euler equations in a two dimensional curvilinear coordinate system. The objective is to obtain rapid convergence for steady state problems. Solutions computed with the method evolve in a non-time-like manner. Stable pressure distributions typically develop in eight to ten Newton-multigrid steps, which is equivalent to the computational work of about 70 iterations with a factored implicit algorithm.

Childs, R. E.↗

Automatic adaptive grid refinement for the Euler equations

A method of adaptive grid refinement for the solution of the steady Euler equations for transonic flow is presented. Algorithm automatically decides where the coarse grid accuracy is insufficient, and creates locally uniform refined grids in these regions. This typically occurs at the leading and trailing edges. The solution is then integrated to steady state using the same integrator (FL052) in the interior of each grid. The boundary conditions needed on the fine grids are examined and the importance of treating the fine/coarse grid interface conservatively is discussed. Numerical results are presented.

Berger, M. J.↗

Calculation Of Aeroelastic Transients Using Euler Equations

Method for calculation of transient aeroelastic effects on airplane wings based on Euler equations of flow. Conforming grids facilitate calculations of flows about changing shapes. Capability to compute aeroelastic effects reduces cost of developing aircraft.

Guruswamy, Guru P.↗

Grid generation and flow solution method for Euler equations on unstructured grids

A grid generation and flow solution algorithm for the Euler equations on unstructured grids is presented. The grid generation scheme, which uses Delaunay triangulation, generates the field points for the mesh based on cell aspect ratios and allows clustering of grid points near solid surfaces. The flow solution method is an implicit algorithm in which the linear set of equations arising at each time step is solved using a Gauss-Seidel procedure that is completely vectorizable. Also, a study is conducted to examine the number of subiterations required for good convergence of the overall algorithm. Grid generation results are shown in two dimensions for an NACA 0012 airfoil as well as a two element configuration. Flow solution results are shown for a two dimensional flow over the NACA 0012 airfoil and for a two element configuration in which the solution was obtained through an adaptation procedure and compared with an exact solution. Preliminary three dimensional results also are shown in which the subsonic flow over a business jet is computed.

Anderson, W. Kyle↗

A 3D finite element multigrid solver for the Euler equations

A low storage, computationally efficient algorithm for the solution of the compressible Euler equations on unstructured tetrahedral meshes is developed. The algorithm takes the form of a centered scheme with the explicit addition of a high accuracy artificial viscosity and the solution is advanced to steady state by means of a multistage timestepping method. The side-based data structure which is employed enables a clear connection to be established between the proposed algorithm and upwind cell vertex schemes for unstructured meshes. The computational efficiency of the procedure is improved by incorporating an unstructured multigrid acceleration procedure. A number of flows of practical interest are analyzed to demonstrate the numerical performance of the proposed approach.

Peraire, J.↗

A grid generation and flow solution method for the Euler equations on unstructured grids

A grid generation and flow solution algorithm for the Euler equations on unstructured grids is presented. The grid generation scheme utilizes Delaunay triangulation and self-generates the field points for the mesh based on cell aspect ratios and allows for clustering near solid surfaces. The flow solution method is an implicit algorithm in which the linear set of equations arising at each time step is solved using a Gauss Seidel procedure which is completely vectorizable. In addition, a study is conducted to examine the number of subiterations required for good convergence of the overall algorithm. Grid generation results are shown in two dimensions for a National Advisory Committee for Aeronautics (NACA) 0012 airfoil as well as a two-element configuration. Flow solution results are shown for two-dimensional flow over the NACA 0012 airfoil and for a two-element configuration in which the solution has been obtained through an adaptation procedure and compared to an exact solution. Preliminary three-dimensional results are also shown in which subsonic flow over a business jet is computed.

Anderson, W. Kyle↗

Adaptive Multiresolution or Adaptive Mesh Refinement? A Case Study for 2D Euler Equations

We present adaptive multiresolution (MR) computations of the two-dimensional compressible Euler equations for a classical Riemann problem. The results are then compared with respect to accuracy and computational efficiency, in terms of CPU time and memory requirements, with the corresponding finite volume scheme on a regular grid. For the same test-case, we also perform computations using adaptive mesh refinement (AMR) imposing similar accuracy requirements. The results thus obtained are compared in terms of computational overhead and compression of the computational grid, using in addition either local or global time stepping strategies. We preliminarily conclude that the multiresolution techniques yield improved memory compression and gain in CPU time with respect to the adaptive mesh refinement method.

97 MATHEMATICS AND COMPUTING↗

A new stream function formulation for the Euler equations

A new stream function formulation is developed for the solution of Euler's equations in the transonic flow region. The stream function and the density are the dependent variables in this method, while the governing equations for adiabatic flow are the momentum equations which are solved in the strong conservation law form. The application of this method does not require a knowledge of the vorticity. The algorithm is combined with the automatic grid solver (GRAPE) of Steger and Sorenson (1979) in order to study arbitrary geometries. Results of the application of this method are presented for the NACA 0012 airfoil at various Mach numbers and angles of attack, and cylinders. In addition, detailed comparisons are made with other solutions of the Euler equations.

Atkins, H. L.↗

Adaptive grid embedding for the two-dimensional flux-split Euler equations

A numerical algorithm is presented for solving the 2-D flux-split Euler equations using a multigrid method with adaptive grid embedding. The method uses an unstructured data set along with a system of pointers for communication on the irregularly shaped grid topologies. An explicit two-stage time advancement scheme is implemented. A multigrid algorithm is used to provide grid level communication and to accelerate the convergence of the solution to steady state. Results are presented for a subcritical airfoil and a transonic airfoil with 3 levels of adaptation. Comparisons are made with a structured upwind Euler code which uses the same flux integration techniques of the present algorithm. Good agreement is obtained with converged surface pressure coefficients. The lift coefficients of the adaptive code are within 2 1/2 percent of the structured code for the sub-critical case and within 4 1/2 percent of the structured code for the transonic case using approximately one-third the number of grid points.

Warren, Gary Patrick↗

Acceleration to a steady state for the Euler equations

A multi-stage Runge-Kutta method is analyzed for solving the Euler equations exterior to an airfoil. Highly subsonic, transonic and supersonic flows are evaluated. Various techniques for accelerating the convergence to a steady state are introduced and analyzed.

Turkel, E.↗

Flux-vector splitting and Runge-Kutta methods for the Euler equations

Runge-Kutta schemes have been used as a method of solving the Euler equations exterior to an airfoil. In the past this has been coupled with central differences and an artificial vesocity in space. In this study the Runge-Kutta time-stepping scheme is coupled with an upwinded space approximation based on flux-vector splitting. Several acceleration techniques are also considered including a local time step, residual smoothing and multigrid.

Turkel, E.↗

Artificial dissipation models for the Euler equations

Various artificial dissipation models which are used with central difference algorithms for the Euler equations are analyzed for their effect on accuracy, stability and convergence rates. In particular, linear and nonlinear models are investigated using an implicit approximate factorization code (ARC2D) for transonic airfoils. Fully implicit application of the dissipation models is shown to improve robustness and convergence rates. The treatment of dissipation models at boundaries will be examined. It will be shown that accurate, error free solutions with sharp shocks can be obtained using a central difference algorithm coupled with an appropriate nonlinear artificial dissipation model.

Pulliam, T. H.↗

Multigrid acceleration of the flux split Euler equations

Multigrid acceleration is applied to a flux-split algorithm for solving the Euler equations in two and three dimensions. The basic algorithm is an implicit spatially-split approximate factorization method. The stability of the scheme in comparison to other factorization is examined. Results are presented for two-dimensional airfoil flows and three-dimensional wing flows which demonstrate substantially improved convergence with the multigrid algorithm. An asymptotic spectral radius of 0.89 and 0.93 is attained for a 97 x 17 x 17 wing solution at subcritical and supercritical conditions, respectively.

Anderson, W. K.↗

Algorithm developments for the Euler equations with calculations of transonic flows

A new algorithm has been developed for the Euler equations that uses flux vector splitting in combination with the concept of rotating the coordinate system to the local streamwise direction. Flux vector biasing is applied along the local streamwise direction and central differencing is used transverse to the flow direction. The flux vector biasing is switched from upwind for supersonic flow to downwind-biased for subsonic flow. This switching is based on the Mach number; hence the proper domain of dependence is used in the supersonic regions and the switching occurs across shock waves. The theoretical basis and the development of the formulas for flux vector splitting are presented. Then several one-dimensional calculations are presented of steady and unsteady transonic flows, which demonstrate the stability and accuracy of the algorithm. Finally results are shown for unsteady transonic flow over an airfoil. The pressure coefficient plots show sharp transonic shock profiles, and the Mach contour plots show smoothly varying contours.

Goorjian, Peter M.↗

Three-dimensional unsteady Euler equation solutions using flux vector splitting

A method for numerically solving the three dimensional unsteady Euler equations using flux vector splitting is developed. The equations are cast in curvilinear coordinates and a finite volume discretization is used. An explicit upwind second-order predictor-corrector scheme is used to solve the discretized equations. The scheme is stable for a CFL number of two and local time stepping is used to accelerate convergence for steady-state problems. Characteristic variable boundary conditions are developed and used in the far field and at surfaces. No additional dissipation terms are included in the scheme. Numerical results are compared with results from an existing three dimensional Euler code and experimental data.

Whitfield, D. L.↗

Entropy–viscosity method for the single material Euler equations in Lagrangian frame

In this work, a new finite element method for solving the Euler equations in Lagrangian coordinates is proposed. The method is stabilized by adding artificial diffusion terms compatible with positivity of mass and internal energy, a minimum principle on the specific entropy, and all generalized entropy inequalities. Two options of first-order artificial diffusion are considered. One is in the spirit of the Eulerian based method (Guermond et al., 2011 [23, 22]; Zingan et al., 2013) and the other is similar to existing viscosity stabilizations in Lagrangian frame, e.g., Dobrev et al. (2012). The method is verified to be high-order for smooth solutions even with active viscosity terms. This is achieved by using high-order finite element spaces and an entropy-based viscosity stabilization that degenerates the first-order viscous terms. This stabilization automatically distinguishes smooth and singular regions. The formal accuracy and convergence properties of the proposed methods are tested on a series of benchmark problems. This is the first result extending the entropy–viscosity methodology to the Lagrangian hydrodynamics.

97 MATHEMATICS AND COMPUTING↗

An enhanced version of an implicit code for the Euler equations

A two-dimensional implicit finite-difference code is applied to the inviscid Euler equations to compute transonic flow past airfoils in order to provide well-documented standard test cases for the general user community. The code is an improved version of Steger's 1976 implicit code. Enhancements include the use of up-wind differencing in supersonic regions before shocks and a variable time step to accelerate convergence. An airfoil grid generation routine based on algebraic techniques is employed. The grids are clustered near shocks to improve resolution. Computed results are compared with other numerical results from the literature.

Pulliam, T. H.↗