Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “environmental permitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

AquaPV: Regulatory and Environmental Considerations for Floating Photovoltaic Projects Located on Federally Controlled Reservoirs in the United States

To meet the nation's decarbonization goals, the U.S. Department of Energy's Solar Futures study forecasts that installed solar photovoltaic (PV) capacity must increase nearly tenfold, from 80 gigawatts (GW) in 2020 to approximately 760 GW cumulative installed capacity by 2035. Ground-mounted PV is expected to dominate future solar deployment and will require more than 3.5 million acres of land to meet annual demand projections (of nearly 45 GW) by 2030. However, various competing demands for land (e.g., agricultural production, conservation) and high land acquisition costs in specific locations could be challenges to meeting future PV demand solely with ground-mounted PV deployment. Floating photovoltaics (FPV) may be an alternative in locations where ground-mounted PV is not feasible and aid in reaching the nation's PV deployment and decarbonization goals. FPV is a newer siting approach in which a PV array is affixed to a floating apparatus and sited on a water body like a reservoir behind a dam. FPV systems may be stand-alone or co-located at new or existing hydroelectric facilities or pumped storage hydropower (PSH) facility reservoirs. Co-located FPV systems may or may not be operationally paired and work in tandem with the hydroelectric or PSH facility. This report provides novel analysis to understand the opportunities and challenges associated with developing stand-alone and co-located FPV projects on reservoirs in the United States. Specifically, the report explores potential environmental and energy benefits and environmental impacts associated with the siting, construction, and operation of FPV projects. The report also identifies and analyzes U.S. federal- and state-issued permits and authorizations required by federal laws to understand the licensing pathways and regulatory requirements for FPV projects sited on reservoirs licensed by the Federal Energy Regulatory Commission and on powered and non-powered reservoirs owned by the Bureau of Reclamation or U.S. Army Corps of Engineers.

ENERGY PLANNING, POLICY, AND ECONOMY,SOLAR ENERGY↗
NASA NTRS1971

Economical phased-array antenna for environmental applications

Antenna system handles data acquisition and tracking, functions as a sensitive radio telescope, and serves as a radiometer in earth atmosphere investigations. Antenna's sensitivity permits resolution of solar disk quadrants in Doppler radar observations. Antenna also serves as a planetary radar device and link to commercial aircraft.

Higgins, W. T.↗
NASA NTRS1991

Characterization of frequency standard instability by estimation of their covariance matrix

The popular 3-cornered hat method used for evaluating the noise contributions of individual frequency standards is revisited. This method is used in several cases, but sometimes the results are not consistent because one or more estimated clock variances turn out to be negative. Different causes of this unacceptable result have been conjectured: among them one regards the hypothesis of uncorrelated clocks, essential in this method. Since recently realistic cases of correlation between clocks, mainly due to the environmental conditions, have been observed, this paper proposes an entirely revisited version of the 3-cornered hat method which permits to evaluate the individual variances and also the possible covariances between clocks, by relaxing the hypothesis of uncorrelation. The uncertainty and the lack of contemporaneity of the measurement series are assumed to be negligible. The lack of the uncorrelation hypothesis calls for a more general mathematical model leading to an underdetermined linear system. The estimates of the (co)variances of the measurement series us well us those of the individual clocks are introduced by means of the scalar product of the related time series and arranged in the respective covariance matrices S and R. Since covariance matrix is positive definite by definition, the problem consists in estimating the unknown R, subject to the constraint of positive definiteness, from the known S. Unfortunately, this constraint is not sufficient to estimate R. Therefore a suitable optimization criterion is proposed, which assures the positive definiteness of R and, at the same time, minimizes the global correlation among clocks. Examples of frequency instability measurements processed by the "classical" 3-cornered hat method and the here-revisited method are presented showing that the solutions are identical only when the uncorrelation hypothesis doesn't violate the positive definiteness of R.

PatriziaTravella↗
NASA NTRS1989

The evolution of ecological tolerance in prokaryotes

The ecological ranges of Archaeobacteria and Eubacteria are constrained by a requirement for liquid water and the physico-chemical stability limits of biomolecules, but within this broad envelope, prokaryotes have evolved adaptations that permit them to tolerate a remarkable spectrum of habitats. Laboratory experiments indicate that prokaryotes can adapt rapidly to novel environmental conditions, yet geological studies suggest early diversification and long-term stasis within the prokaryotic kingdoms. These apparently contradictory perspectives can be reconciled by understanding that, in general, rates and patterns of prokaryotic evolution reflect the developmental history of the Earth's surface environments. Our understanding of modern microbial ecology provides a lens through which our accumulating knowledge of physiology, molecular phylogeny and the Earth's history can be integrated and focussed on the phenomenon of prokaryotic evolution.

NASA Discipline Number 52-30↗
DOE OSTI2025

Workflow for Process Automation of Soil Gas Results from an Automated Soil Gas-Sampling System for Application in Carbon Storage Projects

Conference presentation at Geoconvention, Calgary, Alberta, Canada, May 12–14, 2025. The Energy & Environmental Research Center (EERC) developed an automated workflow for processing soil gas measurements collected from the automated soil gas-sampling systems deployed across the project site. Raw soil gas measurements are collected from each station every 4 hours and automatically uploaded to a cloud database. The workflow begins by writing code to download the data to a workstation automatically, then the data are published to an online dashboard that visualizes the measurements in time-series plots and a process-based decision-making framework. This automated workflow accelerates the time from data acquisition to decision-making. It supports carbon storage project operators by preparing and delivering a live, standardized dataset for quick analysis and source attribution to provide assurance of containment and overall permit compliance.

02 PETROLEUM↗
DOE OSTI2025

Workflow for Process Automation of Soil Gas Results from an Automated Soil Gas-Sampling System for Application in Carbon Storage Projects

Extended abstract for Geoconvention, Calgary, Alberta, Canada, May 12–14, 2025. The Energy & Environmental Research Center (EERC) developed an automated workflow for processing soil gas measurements collected from the automated soil gas-sampling systems deployed across the project site. Raw soil gas measurements are collected from each station every 4 hours and automatically uploaded to a cloud database. The workflow begins by writing code to download the data to a workstation automatically, then the data are published to an online dashboard that visualizes the measurements in time-series plots and a process-based decision-making framework. This automated workflow accelerates the time from data acquisition to decision-making. It supports carbon storage project operators by preparing and delivering a live, standardized dataset for quick analysis and source attribution to provide assurance of containment and overall permit compliance.

02 PETROLEUM↗
NASA NTRS1974

Spacecraft control section for the improved Small Astronomy Satellite (SAS)

The upgraded spacecraft control section for the Small Astronomy Satellite is able to point its thrust axis to any direction in space; it can also spin or slow its outer body rotation to zero for star-locked pointing of side viewing experiments. A programmable telemetry system and delayed command system enhance the inherent capability of a spacecraft designed to be used for a variety of experiments, each of which can be built independently and attached just prior to final acceptance testing and launch. The design of this new spacecraft, whose first launch is scheduled for 1975, is provided in sufficient detail to permit the reader to ascertain its suitability for specific experiments. A summary of the spacecraft characteristics, project reliability requirements, and environmental test conditions are included in the appendices.

Townsend, M. R.↗
NASA NTRS1973

Extension of ERIM multispectral data processing capabilities through improved data handling techniques

The improvement and extension of the capabilities of the Environmental Research Institute of Michigan processing facility in handling multispectral data are discussed. Improvements consisted of implementing hardware modifications which permitted more rapid access to the recorded data through improved numbering and indexing of such data. In addition, techniques are discussed for handling data from sources other than the ERIM M-5 and M-7 scanner systems.

Kriegler, F. J.↗
NASA NTRS1978

Biological specimen holding facilities for Spacelab experiments

The paper describes the design, development, integration, and testing of two prototype holding facilities: (1) a unit housing 36 laboratory rats in individual cages, and (2) a unit housing one unrestrained 14-kg rhesus monkey. Both units are environmentally controlled enclosures complete with food, water, and waste-collection equipment. Timer-controlled fluorescent lights in both units permit automatic day-night cycling. Both units are designed to be compatible with Spacelab interfaces and to be operated by NASA payload specialists.

Jackson, J. K.↗
NASA NTRS1985

Sources of atmospheric methane from wetlands

Through the use of a computerized Geographic Information Service (GIS), field data on methane emissions and water inundation levels have been combined with remotely sensed vegetation cover data. This permits a more precise extrapolation of point flux measurements to regional scale flux estimates. Since the GIS allows changes in environmental variables to be included in the model, the sensitivity of emissions on large scales to changes in these parameters may be studied. Here, methane flux measurements from the Everglades marsh complex are reported, giving the flux by vegetation class.

Bartlett, K. B.↗
NASA NTRS1998

Test of a flexible spacecraft dynamics simulator

There are a number of approaches one can take to modeling the dynamics of a flexible body. While one can attempt to capture the full dynamical behavior subject to disturbances from actuators and environmental torques, such a detailed description often is unnecessary. Simplification is possible either by limiting the amplitude of motion to permit linearization of the dynamics equations or by restricting the types of allowed motion. In this work, we study the nonlinear dynamics of bending deformations of wire booms on spinning spacecraft. The theory allows for large amplitude excursions from equilibrium while enforcing constraints on the dynamics to prohibit those modes that are physically less relevant or are expected to damp out fast. These constraints explicitly remove the acoustic modes (i.e., longitudinal sound waves and shear waves) while allowing for arbitrary bending and twisting, motions which typically are of lower frequency. As a test case, a spin axis reorientation maneuver by the Polar Plasma Laboratory (POLAR) spacecraft has been simulated. POLAR was chosen as a representative spacecraft because it has flexible wire antennas that extend to a length of 65 meters. Bending deformations in these antennas could be quite large and have a significant effect on the attitude dynamics of the spacecraft body. Summary results from the simulation are presented along, with a comparison with POLAR flight data.

Dichmann, Donald↗
NASA NTRS1961

Optimum Design of Insulated Compression Plates Subjected to Aerodynamic Heating

A method to determine the optimum thicknesses of insulation and load-carrying structure has been applied to insulated compression plates subjected to aerodynamic heating. The optimum design results in the lowest combined weight of insulation and load-carrying plate. Load parameters which included the imposed load, insulation conductivity and density, and flight time were found for design strength criteria of compressive yield, compressive buckling, and postbuckling failure. Charts of optimum total weight were prepared for 2024-T3 aluminum alloy, HK3lA magnesium alloy, 17-7 PH stainless steel, and Inconel X for each design criterion. The results show that 17-7 PH stainless steel and Inconel X are most efficient for compressive yield stress and that HK3lA magnesium is most efficient for buckling. HK31A magnesium is also most efficient for the postbuckling failure criterion except under conditions of light loading and long flight periods; under such conditions uninsulated Inconel X may be superior for environmental temperature less than 1,200 F. Insulated magnesium is more efficient than insulated aluminum because the lower density of magnesium permits the use of thick plates with large heat capacity. When more than one failure mode was applied to a design, it was found that the minimum weight structure was one in which all modes of failure occurred at the design load.

Davidson, John R.↗
DOE OSTI2025

Modeling Protocol for Evaluation of Air Emissions for the Idaho National Laboratory Site-wide Permit to Construct and Facility Emission Cap (PTC/FEC)

This document outlines the methods to be used for calculating non-radiological air quality impacts from proposed emissions at the Idaho National Laboratory (INL) Site in support of applying for a renewal to a Permit to Construct with a Facility Emissions Cap (PTC/FEC). The INL Site is seeking to maintain a state enforceable limit on emissions to maintain synthetic minor status in accordance with Idaho Administrative Procedures Act (IDAPA) 58.01.01.175-181 and IDAPA 58.01.01.200-228.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Environmental Thermodynamic Effects on Future Changes of Mesoscale Convective Systems and Isolated Deep Convection Over the US: A Case Study

Mesoscale convective systems (MCSs) and isolated deep convection (IDC) significantly influence local weather conditions and the hydrological cycle across the United States. Their future changes under warming is critical to the society. However, the exact impacts of thermodynamic environmental changes on them are difficult to resolve using climate model simulations which integrate both dynamic and thermodynamic factors. This study explores a theoretical modeling approach to isolate environmental thermodynamic effects on their future changes through a case study. For a 50-day period during the 2020 summer, a pair of convection-permitting model simulations indicate contrasting changes in MCSs and IDC between inland and coastal regions under pseudo global warming. Driven by the thermodynamic environments of these simulations, a single-column parcel model indicates a decrease in the frequency of IDC occurrences, along with increases in duration and precipitation amount under warming, attributable to rising most unstable convective available potential energy (MUCAPE), convective inhibition (MUCIN), and precipitable water (PW). A multi-column parcel model reveals contrasting changes in the frequency and mean area of MCSs between inland and coastal regions, underscoring the increase in mean MUCIN over inland regions and increases in mean MUCAPE and PW over coastal regions. The increase in mean MCS area over inland regions is linked to the interplay between accelerated gust fronts and enhanced subsidence strength, which is further traced to the unchanged mean MUCIN but increased mean MUCAPE in large-scale environments. In conclusion, these case study results suggest a major role of thermodynamic environmental changes in controlling characteristics of MCSs and IDC under warming.

Mesoscale convective system↗
NASA NTRS1976

Specifications for and preliminary design of a plant growth chamber for orbital experimental experiments

It was proposed that plant experiments be performed on board the space shuttle. To permit the proper execution of most tests, the craft must contain a plant growth chamber which is adequately designed to control those environmental factors which can induce changes in a plant's physiology and morphology. The various needs of, and environmental factors affecting, plants are identified. The permissilbe design, construction and performance limits for a plant-growth chamber are set, and tentative designs were prepared for units which are compatible with both the botanical requirements and the constraints imposed by the space shuttle.

Sweet, H. C.↗