Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “energy intermediate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Identification of In Situ Generated High-Spin Fe(II)-N 4 Active Sites for Acidic Oxygen Reduction Reaction via Operando 57 Fe Mössbauer Spectroscopy

Iron-nitrogen-carbon (FeNC) catalysts are considered among the most promising alternative to Pt catalysts in acidic oxygen reduction reaction (ORR), yet the geometric and electronic structures of the true active site under reaction conditions have not been clearly elucidated. Herein, we synthesized a representative FeNC catalyst by pyrolyzing Fe 3+ absorbed on ZIF-8-derived N-doped carbon at a mild temperature under the H 2 /Ar atmosphere, where a formation mechanism of FeN 4 sites through a Zn-mediated Fe nanoparticle atomization process was proposed. The resulting FeNC-750 catalyst shows high acidic ORR activity with a half-wave potential of 0.838 V and a peak power density of 1 W cm -2 in proton-exchange membrane fuel cell (PEMFC). By using operando 57 Fe Mössbauer spectroscopy on FeNC-750, it was revealed that the pyrrolic N-coordinated high-spin Fe 2+ N 4 sites, which are in situ generated from high-spin Fe 3+ N 4 during ORR, are identified as catalytic active states. Density functional theory calculations further verified that, compared to the pyridinic N-coordinated low-spin Fe 2+ N 4 , the pyrrolic N-coordinated high-spin Fe 2+ exhibits optimized adsorption energy for reaction intermediates, thereby lowering the energy barrier of the rate-determining step (RDS) and facilitating OH* desorption. In conclusion, this work provides both experimental and theoretical evidence of the true active site in the FeNC during acidic ORR, offering significant insights for the rational design of high-performance materials for acidic fuel cells.

FeNC catalyst↗
DOE OSTI2022

Experimental screening of salt hydrates for thermochemical energy storage for building heating application

The selection of a suitable salt hydrate for use in a thermochemical energy storage system is challenging. In this work, the most promising salts to store intermediate heat energy were selected and tested. The criteria set are; volumetric energy density of >500 kWh m-3 with a dehydration temperature of <100 degrees C, material cost of <3.5 USD kg-1 (<15 USD kWh-1), melting does not occur during dehydration and safety. Based on that, the salt hydrates SrCl 2 , MgSO 4 , Na 3 PO 4 , MgCl 2 and SrBr 2 were selected and tested experimentally. A constant temperature and humidity chamber was used to measure moisture sorption of different salts. The hydration is investigated under the conditions of 20 degrees C and 20, 30, 40, 60 and 80% RH, while dehydration is investigated under the conditions of 70, 100 and 140 degrees C using an oven. These dehydration temperatures of <100 degrees C are suitable for solar application whereas the dehydration temperature of 140 degrees C is suitable for waste heat. Furthermore, the salts are cycled over 30 times under the hydration conditions of 20 degrees C, 60% RH with a dehydration temperature of 100 degrees C. From these results, it is concluded that SrCl 2 and SrBr 2 are the most promising salts. This study outlines both the advantages and disadvantages of each salt and states the conditions they are most suitable for.

25 ENERGY STORAGE↗
DOE OSTI2026

Absolute efficiency response of the γ-ray spectrometer GRETINA for high-energy γ rays up to 6 MeV

GRETINA (Gamma-Ray Energy Tracking In-beam Nuclear Array), a state-of-the-art γ-ray tracking spectrometer, has been instrumental in advancing nuclear structure studies, particularly in experiments using fast beams of rare isotopes where the γ rays emitted in flight are subject to large Doppler shifts. This work presents an experimental determination of the γ-ray detection efficiency of GRETINA at energies up to 6 MeV. The high-energy γ rays originated from states that were populated in nucleon-removal reactions from a projectile beam at an intermediate beam energy of about 85 MeV/nucleon. Utilizing γ-γ coincidences, efficiency values were extracted in-beam and translated into a source efficiency at rest employing GEANT4 Monte Carlo simulations. A systematic discrepancy in the efficiency of the forward-positioned detectors was identified which is attributed to specific dead-time effects caused by high-energy light-particle events prevalent at forward angles, generating signals in the Ge crystals that saturate the preamplifier’s first stage. Furthermore, this study provides refined efficiency benchmarks for in-beam experiments, improving the accuracy of quantitative γ-ray spectroscopy analyses with GRETINA and GRETA (Gamma Ray Energy Tracking Array) in the future.

GRETINA↗
DOE OSTI2021

Resonant control of photoelectron directionality by interfering one- and two-photon pathways

Coherent control of interfering one- and two-photon processes has for decades been the subject of research to achieve the redirection of photocurrent. The present study develops two-pathway coherent control of ground-state helium atom above-threshold photoionization for energies up to the N = 2 threshold, based on a multichannel quantum defect and R-matrix calculation. Three parameters are controlled in our treatment: the optical interference phase ΔΦ, the reduced electric field strength χ = $\mathscr{E}^2_ω$$\mathscr{E}_{2ω}$, and the final state energy ε. A small energy change near a resonance is shown to flip the emission direction of photoelectrons with high efficiency, through an example where 90% of photoelectrons whose energy is near the 2p 2 1 S e resonance flip their emission direction. However, the large fraction of photoelectrons ionized at the intermediate state energy, which are not influenced by the optical control, make this control scheme challenging to realize experimentally.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Negative components in the representation $\frac{𝑑^{2}⁡(𝜎⁢𝐸)}{𝑑⁡𝐸^2}$ of heavy-ion fusion cross sections

Negative components are observed in the representation $\frac{𝑑^{2}⁡(𝜎⁢𝐸)}{𝑑⁡𝐸^2}$ in heavy-ion fusions related to recent studies of noticeable oscillations in the high-energy region of the fusion excitation functions. A modified multiGaussian model has been developed, which includes contributions for both positive and negative components in the $\frac{𝑑^{2}⁡(𝜎⁢𝐸)}{𝑑⁡𝐸^2}$ representation. The model reproduces the heavy-ion fusion excitation functions very well, including oscillations. The property of these negative components in the $\frac{𝑑^{2}⁡(𝜎⁢𝐸)}{𝑑⁡𝐸^2}$ spectrum and the reaction mechanism of fusion at energies above the Coulomb barrier are investigated. Finally, the model also reproduces well light heavy-ion fusion reactions between 12 C and 16 O at high energy; results imply that the compound nucleus channel effect may have an important contribution at the high energy region for all fusion systems.

low & intermediate energy heavy-ion reactions↗
DOE OSTI2020

Kinetic-energy dissipation and fluctuations in strongly damped heavy-ion collisions within the stochastic mean-field approach

Microscopic mean-field approaches have been successful in describing the most probable reaction outcomes in low-energy heavy-ion reactions. However, those approaches are known to severely underestimate dispersions of observables around the average values that has limited their applicability. Recently it has been shown that a quantal transport approach based on the stochastic mean-field (SMF) theory significantly improves the description, while its application has been limited so far to fragment mass and charge dispersions. In this work, we extend the quantal transport approach based on the SMF theory for relative kinetic energy dissipation and angular momentum transfer in low-energy heavy-ion reactions. Based on the SMF concept, analytical expressions are derived for the radial and tangential friction and associated diffusion coefficients. Those quantal transport coefficients are calculated microscopically in terms of single-particle orbitals within the time-dependent Hartree-Fock (TDHF) approach. As the first application of the proposed formalism, we consider the radial linear momentum dispersion, neglecting the coupling between radial and angular momenta. We analyze the total kinetic energy (TKE) distribution of binary reaction products in the 136 Xe + 208 Pb reaction at E c.m. =526 MeV and compare with experimental data. From time evolution of single-particle orbitals in TDHF, the radial diffusion coefficient is computed on a microscopic basis, while a phenomenological treatment is introduced for the radial friction coefficient. By solving the quantal diffusion equation for the radial linear momentum, the dispersion of the radial linear momentum is obtained, from which one can construct the TKE distribution. We find that the calculations provide a good description of the TKE distribution for strongly damped events with large energy losses, TKEL ≳ 150 MeV. However, the calculations underestimate the TKE distribution for smaller energy losses. Further studies are needed to improve the technical details of calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

CGOLS V: Disk-wide Stellar Feedback and Observational Implications of the Cholla Galactic Wind Model

Abstract We present the fifth simulation in the Cholla Galactic OutfLow Simulation (CGOLS) project—a set of isolated starburst galaxy simulations modeled over large scales (10 kpc) at uniformly high resolution (Δx≈ 5 pc). Supernova feedback in this simulation is implemented as a disk-wide distribution of clusters, and we assess the impact of this geometry on several features of the resulting outflow, including the radial profiles of various phases; mass, momentum, and energy outflow rates; covering fraction of cool gas; mock absorption-line spectra; and X-ray surface brightness. In general, we find that the outflow generated by this model is cooler, slower, and contains more mass in the cool phase than a more centrally concentrated outflow driven by a similar number of supernovae. In addition, the energy loading factors in the hot phase are an order of magnitude lower, indicating much larger losses due to radiative cooling in the outflow. However, coupling between the hot and cool phases is more efficient than in the nuclear burst case, with almost 50% of the total outflowing energy flux carried by the cool phase at a radial distance of 5 kpc. These physical differences have corresponding signatures in observable quantities: the covering fraction of cool gas is much larger, and there is greater evidence of absorption in low and intermediate ionization energy lines. Taken together, our simulations indicate that centrally concentrated starbursts are more effective at driving hot, low-density outflows that will expand far into the halo, while galaxy-wide bursts may be more effective at removing cool gas from the disk.

Astronomy & Astrophysics↗
DOE OSTI2020

Reversible and Selective CO 2 to HCO 2 − Electrocatalysis near the Thermodynamic Potential

Abstract Reversible catalysis is a hallmark of energy‐efficient chemical transformations, but can only be achieved if the changes in free energy of intermediate steps are minimized and the catalytic cycle is devoid of high transition‐state barriers. Using these criteria, we demonstrate reversible CO 2 /HCO 2 − conversion catalyzed by [Pt(depe) 2 ] 2+ (depe=1,2‐ bis (diethylphosphino)ethane). Direct measurement of the free energies associated with each catalytic step correctly predicts a slight bias towards CO 2 reduction. We demonstrate how the experimentally measured free energy of each step directly contributes to the <50 mV overpotential. We also find that for CO 2 reduction, H 2 evolution is negligible and the Faradaic efficiency for HCO 2 − production is nearly quantitative. A free‐energy analysis reveals H 2 evolution is endergonic, providing a thermodynamic basis for highly selective CO 2 reduction.

Cunningham, Drew W.↗
DOE OSTI2025

Fundamental Interactions of Bimetallic Cu x Pd y ( x + y = 4) Clusters Supported on the α-WC(0001) Surface and Their Performance for CO 2 Adsorption and Dissociation

The tungsten carbide α-WC(0001) surface, an active system for the activation of H 2 and important hydrogenation processes involving unsaturated hydrocarbons, can serve as a support of bimetallic clusters to produce materials with unique catalytic properties, opening routes for a wide range of technical applications. In particular, Cu x Pd y clusters are of particular interest because they combine metals with different properties. A stochastic method was applied to obtain the geometry of Cu x Pd y (x + y = 4) bare clusters, evaluating thousands of possibilities to obtain stable structures, yielding one isomer for Cu 4 , Cu 2 Pd 2 , Cu 1 Pd 3 , and Pd 4 and two isomers for Cu 3 Pd 1 . These clusters were supported on C and W terminations of the tungsten carbide (0001) surface, exploring all of the binding possibilities. The adsorption energies on the C and W terminations are in the ranges from −2.51 to −3.02 eV and from −2.26 to −3.30 eV, respectively. The strongest and weakest binding was seen for monometallic Cu 4 and Pd 4 clusters on both C and W terminations, while the Cu-Pd bimetallics have intermediate adsorption energies but lack a clear trend in terms of composition. The location of Cu x Pd y clusters over the (0001) surface induces a decrease in the work function relative to the pristine surface, while the cluster-surface Bader charge transfer and variations in the partial density of states point to changes in the electronic structure of the carbide atoms upon binding of the metallic clusters. The d-band center of the Cu x Pd y deposited on WC(0001) indicates an intermediate reactivity among Cu(111) and Pd(111) surfaces, modulating the reactivity with small numbers of Cu and Pd atoms, i.e., atom economy in catalyst design. The likelihood of existence of the most stable Cu x Pd y (x + y = 4) clusters in the temperature range of 298-400 K is 100%. The composite Cu x Pd y /α-WC(0001) (x + y = 4), is a nontrivial system since 22 isomers are needed to completely describe its structural properties. Among the isomers, seven structures are necessary to represent Cu 3 Pd 1 /α-WC(0001), five for Pd 4 /α-WC(0001), two for Cu 4 /α-WC(0001), and four for Cu 2 Pd 2 /α-WC(0001) and Cu 1 Pd 3 /α-WC(0001). The large number of cluster isomers supported on the tungsten carbide surface opens the door for several applications in the heterogeneous catalysis of the Cu x Pd y /α-WC(0001) composite, with the possibility of modulating the geometric, electronic, and chemical properties according to a desired application. Test studies for the adsorption of CO 2 indicate that the Cu x Pd y /α-WC(0001) composites are highly active for the adsorption and decomposition of the molecule, with bimetallic and admetal-carbide interactions playing a key role in the binding performance. In conclusion, this high activity indicates that these systems should be useful as catalysts for the conversion of CO 2 to oxygenates or light alkanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Boosting CO 2 Electrochemical Reduction with Atomically Precise Surface Modification on Gold Nanoclusters

Thiolate-protected gold nanoclusters (NCs) are promising catalytic materials for the electrochemical CO 2 reduction reaction (CO 2 RR). In this work an atomic level modification of a Au 23 NC is made by substituting two surface Au atoms with two Cd atoms, and it enhances the CO 2 RR selectivity to 90–95 % at the applied potential between -0.5 to -0.9 V, which is doubled compared to that of the undoped Au 23 . Additionally, the Cd-doped Au 19 Cd 2 exhibits the highest CO 2 RR activity (2200 mA mg -1 at -1.0 V vs. RHE) among the reported NCs. This synergetic effect between Au and Cd is remarkable. Density-functional theory calculations reveal that the exposure of a sulfur active site upon partial ligand removal provides an energetically feasible CO 2 RR pathway. The thermodynamic energy barrier for CO formation is 0.74 eV lower on Au 19 Cd 2 than on Au 23 . Here these results reveal that Cd doping can boost the CO 2 RR performance of Au NCs by modifying the surface geometry and electronic structure, which further changes the intermediate binding energy. This work offers insights into the surface doping mechanism of the CO 2 RR and bimetallic synergism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Proton and neutron density distributions at supranormal density in low- and medium-energy heavy-ion collisions. II. Central Pb + Pb collisions

This paper represents a continuation of our investigation into the limitations on total, proton, and neutron particle number densities, as well as the asymmetry of proton and neutron density distributions achievable in central heavy-ion collisions. We explore these aspects at low and medium energies within the framework of the Boltzmann-Uhlenbeck-Uehling (pBUU) transport and time-dependent Hartree-Fock (TDHF) models. Previous studies, focusing on symmetric and asymmetric collisions of Ca and Sn nuclei [1], and initial results on Pb-nuclei collisions [2], emphasized the role of the Coulomb interaction in these events. Our findings indicated that: (i) the highest total densities predicted at 𝐸 beam = 800 MeV/nucleon were on the order of ≈ 2.5⁢𝜌 0 (𝜌 0 = 0.16 fm −3 ), (ii) the proton-neutron asymmetry for maximal densities, 𝛿=(𝜌$^{max}_{n}$− 𝜌$^{max}_{p}$)/(𝜌$^{max}_{n}$+𝜌$^{max}_{p}$), did not generally exceed the asymmetry in the initial state of the collision at all beam energies and tended to decrease during the reaction, and (iii) a significant portion of this asymmetry had its microscopic origin in Coulomb forces, masking the pure nuclear contribution. These new findings, particularly relevant in the astrophysical context, are further examined in this work, focusing on the heaviest target-projectile combination 212,208 Pb accessible in an experiment. We introduce the SkT3 Skyrme force model, not previously used for the Pb system, and compare it to the SV-bas and SV-sym34 models to explore the symmetry-energy dependence of the results. Contour plots of nucleonic densities are presented, contrasting the time evolution of the density distributions in low (TDHF) and high (pBUU) models. We also present the evolution of normalized maximal proton, neutron, and total nucleon number density with increasing beam energy in the full pBUU model and the Vlasov approximation, aiming to explore the impact of correlations in the reaction. The time evolution of the proton and neutron density distributions in the plane transverse to the beam direction is illustrated at both low and high beam energy. In conclusion, our detailed examination of the Pb system in this work provides further essential evidence that the aforementioned findings (i)–(iii) are only weakly dependent on system size and a symmetry-energy model, and thus, they are of more general importance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Evaluation of Sandia NCS Benchmark Suite Updates

The Sandia Nuclear Criticality Safety (NCS) program’s benchmark suite was recently updated. This suite is used to ensure that NCS calculations using computer-based neutron transportation codes have an established baseline comparison of calculated versus known experimental results. The Evaluated Nuclear Data File (ENDF) version used for the MCNP models in the suite was changed from ENDF/B-VII.1 to ENDF/B-VIII.0. Additionally, relevant thermal scattering law data libraries (TSLs) were updated. The sensitivity of the calculational bias of each benchmark model to these changes is discussed. Implementation of the ENDF/B-VIII.0 library and updated TSLs results in improvements to bias distribution in the intermediate enriched uranium, plutonium, and mixed uranium–plutonium (IEU, PU, and MIX) fissionable material benchmark categories, but a small bias increase in low- and high-enriched uranium categories (LEU and HEU, respectively). The results also highlight the sensitivity of the benchmarks, with average lethargy of neutrons causing fission energies (EALF) in the intermediate energy range to ENDF/B library changes. The most numerous bias changes were observed in the thermal energy region when transitioning from ENDF/B-VII.1 to ENDF/B-VIII.0. In conclusion, most of the unique bias changes observed in MCNP 6.3.0 between the two nuclear data libraries were in the LEU-COMP-THERM evaluation subset.

ICSBEP↗
DOE OSTI2025

Scaling microstructural processes in the sintering of ionic ceramics

A multi-scale framework, combining a multiphase field formulation and large deformation mechanics, was developed as a stepping stone to perform the data analytics of the microstructural level kinetics of a sintering solid. Relevant microstructural information from this framework, such as grain, stress, and porosity statistics, was scaled up to describe the macroscopic level sintering kinetics. Here, the developed formulation was applied to describe the electric field assisted sintering of Y 2 O 3 . Microstructural inhomogeneities in a multi-granular solid result in the formation of a field of compressive stress networks, which interleave with low compression and weakly tensile regions, defining a scaffolding for sintering concentration regions to develop. A Poisson effect-induced lateral stress network is also naturally self-induced as a result of the mechanical constraints imposed by the sintering apparatus. For long sintering times, localized shear stresses enhancing mass flow along grain boundaries and internal surfaces develop. Three-sided pores are removed by either vacancy transport to the surrounding pores, or move towards the external surfaces through grain boundary diffusion. Four- and higher order-sided pores stabilize because an equal amount of vacancies are gained and lost through the connecting grain boundaries. Grain dewetting contributes to pore coalescence, suggesting that pore kinetics and grain growth are coupled and should be analyzed in concert. The combined sintering and grain growth kinetics define six regimes of sintering behavior: (1) T, the transient regime; (2) E$_Υ$, the surface energy dominated, early sintering regime, where the grain growth exponent, p = 1, and the stress concentration factor, $f$ ~ $1/\hat{ρ}^{4.6}$; (3) E S , the stress dominated, early sintering regime, where p = 1 and $f$ ~ $1/\hat{ρ}^{4}$; (4) I$_Υ$, the surface energy dominated, intermediate sintering regime, where p = 2 and $f$ ~ $1/\hat{ρ}^{4.6}$; (5) I S , the stress dominated, intermediate sintering regime, where p = 2 and $f$ ~ $1/\hat{ρ}^{4}$; and (6) L, the late sintering regime, where p = 3 and $f$ ~ 1. At the macroscopic level, the rapid densification and suppression of grain growth observed in the electric field assisted sintering process is a consequence of the compounding effects of the underlying stress-, transport-, and interfacial-energy-induced energy minimization kinetics, as predicted by the multi-scale framework.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Heavy-ion fusion cross section formula and barrier height distribution

Methods for obtaining fusion cross section formulas are discussed, especially for those that take on an empirical form. A new expression starting with σ( E) = $\frac{1}{E}$ $\int ^{E}_{E_0}$ $(\int^{E'}_{E_0} B (E^\shortparallel) dE^\shortparallel)dE'$ has been explored. Here, B(E) is a reasonable, assumed function of the barrier height distribution, $\frac{d^2 (\sigma E)}{dE^2}$. Further, the resulting analytic cross section formula reproduces very well the excitation functions for many light and heavy fusion systems across wide energy ranges, when B(E) is assumed to be a multi-Gaussian function. This study offers an improved determination of the fusion barrier height distribution over other numerical techniques.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Merging of transport theory with the time-dependent Hartree-Fock approach: Multinucleon transfer in U + U collisions

Multinucleon transfer mechanism in the collision of 238 U + 238 U system is investigated at E c.m. = 833 MeV in the framework of the quantal diffusion description based on the stochastic mean-field approach. Double cross sections σ (N, Z ) as a function of the neutron and proton numbers, the cross sections σ (Z ) and σ (A) as a function of the atomic numbers and the mass numbers are calculated for production of the primary fragments. The calculation indicates the 238 U + 238 U system may be located at an unstable equilibrium state at the potential energy surface with a slightly negative curvature along the β stability line on the (N, Z ) plane. Here, this behavior may lead to rather large diffusion along the β stability direction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Breaking the passivation barrier via d-p orbital optimization for stable hydrogen production and sulfion upgrading

The development of energy-efficient hydrogen production technologies represents a critical pathway toward achieving global carbon neutrality objectives. This work provides fundamental insights into overcoming catalyst passivation challenges in sulfide oxidation reaction (SOR)-coupled hydrogen evolution reaction (HER) systems through precise orbital hybridization engineering. Our theoretical simulations reveal that sulfur-passivated ruthenium surfaces can effectively modulate d-p orbital hybridization, significantly reduce d-electron activity while stabilizing long-chain S 8 species and decreasing intermediate adsorption energies. Furthermore, metal carbides/ruthenium heterostructure (MC/Ru, M = V, Mo, W) was designed to achieve simultaneous optimization of both HER (∆G H* = −0.11 eV) and SOR (∆G RDS = 1.51 eV) via work-function-mediated interfacial electron transfer, which effectively tailors surface electronic states. Guided by theoretical predictions, we successfully synthesized a series of metal carbides/ruthenium/nitrogen-doped carbon catalysts based on a solid-phase reaction and designated as MC/Ru@NC (M = V, Mo, W). The optimized VC/Ru@NC catalyst exhibits exceptional performance in a membrane-free two-electrode system, achieving an ultralow cell voltage of 0.76 V at 200 mA cm −2 with outstanding stability over 1600 h, while maintaining 97.5 % Faradaic efficiency for hydrogen production and 73.8 % sulfur recovery efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Imprints of high-momentum nucleons in nuclei on hard photons from heavy-ion collisions near the Fermi energy

The short-range correlation (SRC) induced by the tensor force in the isosinglet neutron-proton interaction channel leads to a high-momentum tail (HMT) in the single-nucleon momentum distributions n(k) in nuclei. Owing to the remaining uncertainties about the tensor force, the shape of the nucleon HMT may be significantly different from the dilute interacting Fermi gas model prediction n(k) ~ 1/k 4 similar to the HMT in cold atoms near the unitary limit. Within an isospin- and momentum-dependent Boltzmann-Uehling-Uhlenbeck transport model incorporating approximately the nucleon HMT, we investigate hard photon emissions in 14 N + 12 C and 48 Ca + 124 Sn reactions at beam energies around the Fermi energy. Imprints of different shapes of the HMT on the energy spectrum, angular distribution and transverse momentum spectrum of hard photons are studied. Furthermore, while the angular distribution does not carry any information about the shape of the nucleon HMT, the energy spectra and especially the mid-rapidity transverse momentum spectra of hard photons are found to bare strong imprints of the shapes of nucleon HMTs in the two colliding nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗