Reforming sewage sludge pyrolysis volatile with Fe-embedded char: Minimization of liquid product yield
Highlights: • Fe{sub 2}(SO{sub 4}){sub 3} is added in sewage sludge to produce pyrolysis char (SSC) embedded with Fe. • Fe-embedded SSC is utilized to reform the same source volatile to produce high quality syngas and avoid liquid products. • More gas is produced with raised H{sub 2} content as Fe concentration elevated in the Fe-embedded SSC. • Total liquid product and its oily fraction decreased greatly after reformed with Fe-embedded SSC. - Abstract: Obtaining high quality syngas from sewage sludge (SS) means transferring a low-grade SS into a high-grade fuel or raw materials for chemical products. In this study, Fe is added to SS in form of Fe{sub 2}(SO{sub 4}){sub 3} to produce an effective and self-sufficient catalyst in order to obtain more syngas and minimize liquid products from SS pyrolysis. The Fe-embedded sewage sludge chars (SSCs) were used as catalysts for volatile reforming at 600 °C. It has been found that the gas yield increases from 15.9 to 35.8 wt% of the SS and that of liquids decreases from 31.9 to 10.2 wt% after volatile reforming with Fe-embedded SSC when Fe was added equal to 7 % in the dried SS. In addition, the content of nitrogen-containing compounds in the oily products decreased. After reforming with Fe-embedded SSC, the molar fractions of syngas combustible components, including H{sub 2}, CH{sub 4} and CO, increase, and the higher heating value of the syngas increased to 17.0 MJ/Nm{sup 3} from the original 12.5 MJ/Nm{sup 3} obtained from SS pyrolysis at 550 °C. Moreover, the volatile reforming seems to reduce the level of some important syngas pollutants, like H{sub 2}S, HCl and HCN, even though it was also observed an increase of the contents of SO{sub 2}, NH{sub 3}, NO{sub 2,} HCNO and N{sub 2}O.