Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrodeposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A study of corrosion on electrodeposited superhydrophobic copper surfaces

This study considers the corrosion characteristics of superhydrophobic copper surfaces with multiscale asperities formed inherently on a copper substrate, using a facile, low energy, electrodepostion method. A systematic study is presented for the first time on the effect of surface functionalization time on long-term immersion in a wide range of corrosive environments from the extremely acidic to the extremely alkaline. The corrosion resistance is also reported for the first time as a function of temperature in the range 23–85°C. The superhydrophobic surfaces are shown to enhance corrosion resistance by up to four orders of magnitude compared to bare copper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tunable Stabilization of Cuprous Ions via Kinetic and Thermodynamic Control of Cu Electrodeposition in Non-Aqueous Media

In this work, significant stabilization of Cu + ions is achieved in non-aqueous electrolytes containing TFSI - and Cl - anions with diglyme as solvent. When Cl - is absent, stabilization of Cu + occurs due to the very low stability constant of Cu 2+ in diglyme. However, in the presence of relatively low Cl - concentrations (i.e., equimolar relative to Cu 2+ ), both Cu + and Cu 2+ form extremely stable Cu 2+ / + [Cl - ] complexes resulting in a similar to 1200 mV negative shift of the Cu + /0 redox couple relative to that of more easily reduced Cu + [TFSI - ][Cl - ] complexes. Furthermore, these results suggest that the lower solvation energies and wider electrochemical stability windows of non-aqueous solvents relative to water enable anions to play a much more significant role in guiding complexation behavior-providing new possibilities for (electro)chemical stabilization of reactive intermediates and highlighting the wealth of unexplored opportunities for electrolyte design in non-aqueous systems.

Anion Association↗
DOE OSTI2025

Nanoporous Fe 2 O 3 and Soluble Fe(II) Intermediates Accelerate the Electrodeposition of Fe in NaOH(aq)

Electrochemical conversion of iron oxide to iron metal can enable low-cost batteries for long duration energy storage and zero-emissions ironmaking for steel. Iron oxides, such as hematite, can be electrochemically reduced to metallic iron in concentrated alkaline electrolytes at modest temperatures, but the relative influences of solid-state and dissolved intermediates at practical reaction rates remains unclear. Here, in this study, we prepare a homologous set of well-defined hematite particles to measure how the nanoscale morphology of oxides controls both their reactivity and apparent reduction mechanism in concentrated hydroxide. Correlated electron microscopy and rotating-ring-disk-electrode measurements revealed that nanoporous hematite and solid intermediates formed iron via a dissolution-redeposition pathway. In contrast, dense hematite particles directly formed iron metal via reactive fracture. While previous studies on iron electrowinning have primarily emphasized the role of particle diameter at the micron scale, these results demonstrate the importance of the dissolution-redeposition pathway to support rapid reaction rates and suggest that nanoscale porosity controls iron oxide reactivity at temperatures <100 °C. Therefore, iron-oxide-to-metal electrolyzers and fast-charging iron-air batteries supported by curtailed electricity can increase the rate of metal formation by accelerating fracture and dissolution in reactant oxides.

TEM↗
DOE OSTI2023

Prediction and Control of Atomic Ordering in Electrodeposited Binary Alloy Films: Direct Synthesis of L10 Magnetic Phases

Permanent magnet materials are essential components in renewable energy technology, underlying, electric vehicles, hybrids, wind turbines and more. Today commercial permanent magnets based on Nd-Fe-B exhibit an energy product of ~ 400 kJ/m 3 , capable to run wind turbines efficiently. Unfortunately, the supplies of rare-earth elements are centralized, and their availability may see volatility over time. This state of affairs stimulates the search for the search for rare-earth-free permanent magnetic materials. The L1 0 crystal structure underlines an important class of chemical ordered alloys that exhibit uniaxial magnetocrystalline anisotropy. This material has been considered an excellent candidate for rare-earth-free permanent magnets. In this program, a series of systematic experiments were performed and analysed in order to understand the effect of each. In order to synthesize L 10-Fe-Ni, one has to circumvent the sluggish kinetic and the limited driving force resulted from the low order-disorder temperature (~320°C) of the system. A strategy was found to trigger a martensitic transformation from the FCC phase to one of the non-cubic phases by high-strain methods. The body-centered tetragonal Fe-Ni obtained by this strategy was considered as a precursor of L10 Fe-Ni. The formation of BCT Fe-Ni via a displacive process was also implemented at the nanoscale by using tailored AuNi@FeNi core@shell.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Chemomechanical origin of morphological disparity in lithium metal electrodeposition

The morphology of electrochemically deposited lithium (Li) critically governs the cycling stability and safety of Li metal batteries, yet the underlying controlling factors remain poorly understood. Even within the same coin cell, Li deposits can exhibit strikingly different morphologies, for example, sparse whiskers coexisting with particle-like deposits, indicting strong local variations in growth conditions. By combining cryogenic transmission electron microscopy with phase-field modeling, we here identify the root cause of this disparity. We reveal that the morphological divergence originates from the variations in structure and chemical composition of the initial SEI layer formed on the copper (Cu) substrate. These variations arise from substrate defects that induce localized electrochemical fields, driving selective dissociation of either solvent or salt, producing SEI layers with distinct chemomechanical properties. Solvent-derived organic SEI favors whisker growth, whereas salt-derived SEI promotes particle formation. This study establishes a direct mechanistic link between SEI chemomechanical properties and Li morphology, providing design principles for tailoring SEI layers to control Li deposition

energy storage↗
DOE OSTI2023

A Workflow for Accelerating Multimodal Data Collection for Electrodeposited Films

Abstract Future machine learning strategies for materials process optimization will likely replace human capital-intensive artisan research with autonomous and/or accelerated approaches. Such automation enables accelerated multimodal characterization that simultaneously minimizes human errors, lowers costs, enhances statistical sampling, and allows scientists to allocate their time to critical thinking instead of repetitive manual tasks. Previous acceleration efforts to synthesize and evaluate materials have often employed elaborate robotic self-driving laboratories or used specialized strategies that are difficult to generalize. Herein we describe an implemented workflow for accelerating the multimodal characterization of a combinatorial set of 915 electroplated Ni and Ni–Fe thin films resulting in a data cube with over 160,000 individual data files. Our acceleration strategies do not require manufacturing-scale resources and are thus amenable to typical materials research facilities in academic, government, or commercial laboratories. The workflow demonstrated the acceleration of six characterization modalities: optical microscopy, laser profilometry, X-ray diffraction, X-ray fluorescence, nanoindentation, and tribological (friction and wear) testing, each with speedup factors ranging from 13–46x. In addition, automated data upload to a repository using FAIR data principles was accelerated by 64x.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A preliminary investigation into the electrodeposition and synthesis of radiopure Copper–Chromium alloys for rare-event physics detector systems

Current investigations into neutrinoless double beta decay and the direct detection of dark matter require increasingly sensitive detector systems that demand ultra-low background materials. These requirements have previously been attained using ultra-radiopure electroformed (EF) copper. However, pure copper possesses high ductility and relatively low strength, which necessitates the need for large amounts of material and extra care during fabrication to help minimize galling and mechanical failure. Furthermore, we investigate an alloying alternative to pure EF copper by examining low wt% copper chrome (Cu–Cr) solid solution alloys, with inquiries into alloy hardness, strength, and radiopurity. Alloyed Cu–Cr layered samples are shown to exhibit significantly increased hardness compared to EF copper, for example showing a 50% increase in exhibited hardness using less than 1% Cr by weight, with limited negative impact to the material’s radiopurity.

Background↗
DOE OSTI2023

Understanding the reversible electrodeposition of aluminum in low-cost room-temperature molten salts

Aluminum is the most earth-abundant metal, trivalent, and inert in ambient air; it also has a density approximately five times that of lithium at room temperature, making it attractive for cost-effective, long-duration storage in batteries. Here, we investigate structural requirements and physicochemical and transport properties of ionic liquid (IL) electrolytes thought to enable high reversibility of Al battery anodes. We find that intentionally designed, low-cost IL analogs, including ammonium-based molten salts, offer comparable Al anode reversibility to state-of-the-art imidazolium-based IL melts. A critical ratio of solvated Al-ion species is required to balance the effects of Lewis acidity needed to continuously etch native Al 2 O 3 and form a stable solid electrolyte interphase on Al. Our findings open new opportunities for developing simple, cost-effective, room-temperature Al batteries that enable long-duration electrical energy storage.

25 ENERGY STORAGE↗