Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrical resistivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Development of an ERT‐Based Framework for Bentonite Buffers Monitoring From Laboratory Tests: 1. Characterizing Thermal–Hydrological–Mechanical Processes

Abstract Bentonite clay is widely used in engineered barrier systems for the permanent disposal of high‐level radioactive waste due to its low permeability, high swelling capacity, and thermal stability. However, the complex thermal‐hydrological‐mechanical (THM) processes induced by heating from decaying radioactive waste and hydration from surrounding rock can lead to heterogeneous changes that are difficult to measure and predict. This study develops an Electrical Resistivity Tomography (ERT)‐based framework for monitoring THM processes, progressing from sample‐scale to bench‐scale tests, to inform field‐scale applications. Sample‐scale tests analyzed small bentonite samples under controlled variations in water content, temperature, and porosity to establish fundamental resistivity relationships. Bench‐scale tests involved larger bentonite columns subjected to heating (up to 200°C) and hydration under controlled pressure, simulating repository conditions. ERT measurements, complemented by X‐ray CT imaging, temperature monitoring, and tracing sensors, revealed coupled THM processes, such as hydration‐induced compression, swelling, and thermal gradients, leading to complex resistivity patterns. The results demonstrate the potential of ERT for capturing THM‐induced resistivity changes, though challenges remain in upscaling and quantitative analysis. This study evaluates laboratory test capabilities and proposes future improvements for understanding THM‐induced resistivity responses. A conceptual framework for ERT implementation in field‐scale monitoring is presented, synthesizing findings from both scales and exploring how ERT data can inform long‐term modeling and reduce prediction uncertainties. Overall, this ERT‐based framework offers a robust method for monitoring bentonite buffers, aiding in early issue detection and supporting the safe long‐term disposal of radioactive waste in geological repositories, while highlighting the need for future development. Plain Language Summary Bentonite clay is crucial in engineered barrier systems (EBS) for containing high‐level radioactive waste due to its ability to absorb water, swell, seal and remain stable under high temperatures. When bentonite absorbs water and heats up from radioactive decay, it experiences complex changes in its physical and mechanical properties. Understanding these changes is important for ensuring the long‐term safety and effectiveness of EBS. This study used Electrical Resistivity Tomography (ERT), a non‐invasive method that measures electrical conductivity to monitor these changes during laboratory experiments. The ERT data revealed significant variations in resistivity corresponding to changes in water content, temperature, and density, providing detailed spatial and temporal insights into the behavior of bentonite. These findings enhance our ability to predict the long‐term performance of bentonite barriers, ensuring the safe containment of radioactive waste. By improving our understanding of bentonite's behavior, this research supports the development of more reliable and effective barrier systems for radioactive waste disposal, protecting the environment and public health. Key Points ERT monitoring was employed to capture resistivity changes in bentonite during controlled heating and hydration experiments, providing insights into THM processes ERT data reveal significant resistivity changes correlated with water content, temperature, and mechanical effects, enhancing the understanding of THM dynamics in bentonite This study explores the potential of the framework for application in field‐scale EBS monitoring, emphasizing the need for integrating additional geophysical methods for comprehensive subsurface imaging

Chen, Hang↗
DOE OSTI2020

Clathrate BaNi 2 P 4 : An Interplay of Heat and Charge Transport Due to Strong Host–Guest Interactions

Heat and charge transport properties of the metallic unconventional clathrate BaNi 2 P 4 , hosting Ba cations in oversized Ni 8 P 16 cages, are investigated. A novel method of single-crystal growth was developed, yielding 2–3 mm sized crystals of BaNi 2 P 4 . We also developed a setup to accurately measure thermal conductivity and electrical resistivity of the synthesized single crystals in a wide temperature range avoiding crystal remounting. BaNi 2 P 4 has a metallic temperature dependence of its electrical resistivity (decreasing with decreasing temperature) and manifests an unconventional T 2 power law for 50 K < T < 300 K; below 50 K, the power-law exponent increases gradually such that below 10 K the power law is T 5 , a predicted but extremely rarely experimentally observed dependence for peculiar electron–phonon interactions. Furthermore, electronic band structure calculations, consistent with measurements of de Haas–van Alphen oscillations, show large band dispersions with significant contributions of Ba orbitals to states near the Fermi level, which is atypical for clathrates. The thermal properties of BaNi 2 P 4 were probed using a combination of variable-temperature single-crystal X-ray diffraction experiments, heat capacity measurements, first-principles phonon dispersion calculations, and inelastic neutron scattering measurements. BaNi 2 P 4 exhibits significant hybridization of the Ba-guest and Ni–P-framework vibrational modes, which may be enhanced via the detected split of the Ba position, which results in strong Ba-framework interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of substrate tilt on sputter-deposited AuTa films

Gold-tantalum alloy films are of interest for biomedical and magnetically-assisted inertial confinement fusion applications. However, growth mechanisms of such Au-Ta alloy films are not well understood. Here, we systematically study the effect of substrate tilt on properties of films deposited by direct current magnetron sputtering from a AuTa alloy target. Experimental data is correlated with distributions of landing energies and incident angles of sputtered and backscattered species calculated by Monte Carlo simulations of ballistic collisions and gas phase atomic transport. Results reveal that the deposition rate and film density monotonically decrease with increasing substrate tilt. Properties are similar for films with a tilt of 40° and below: films are amorphous, with an average compressive stress of 0.5 GPa, a density of 16 g/cm 3 , and electrical resistivity of 200 μΩ cm. The critical substrate tilt angle for the onset of porosity, a transition to a reduced stress state, and an increase in electrical resistivity lies between 40 and 60°. Based on Monte Carlo simulations, these changes in film properties are correlated with an increase in the average impact angle of the ballistic component of atomic flux. Implications of these results to deposition onto non-planar substrates are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A predictive analytical model of electrical transport in multi-principal-element alloys

A predictive analytical model is presented for the electrical conductivity of multi-principal-element alloys (MPEAs), including those containing aluminum, transition metals, and refractory metals. Given that the lattice parameter of the Wigner-Seitz cell of an MPEA is similarly variable to a bulk metallic glass, it is postulated that electron scattering can be approximated by a series of two-level systems. Here, the resulting reduced-order model enabled an accurate determination of electrical resistivity and electron thermal conductivity based on the scattering of electrons in a two-level system across a Bloch-potential-based virtual crystal approximation. Model results are compared to experimental four-point probe electrical resistivity measurements between 300 K and 700 K for Al 0.3 CoCrCuFeNi, CoCrFeMnNi, (CoCrFeMnNi) 0.98 W 0.02 , (CoCrFeMnNi) 0.95 W 0.05 , and Nb 4 Ta 4 V 3 Ti, for model validation.

Analytical model↗
DOE OSTI2022

Formation of misfit dislocation arrays and helium nanochannels near copper surface assisted by high-temperature graphene deposition

Misfit dislocation arrays (MDAs) at semi-coherent heterogeneous interface have been demonstrated effectiveness to trap and then outgas helium (He) for alleviating void swelling in metals, but limited by atomic-level thin film deposition that is difficult to scale-up for industrial production. In this work, we proposed an innovative strategy that could generate semi-coherent homophase interfaces in a same grain by varying surface energy density assisted by high-temperature graphene (Gr) deposition. This strategy transforms strain energy and surface energy, two originally distinctive processes into successive processes, and demonstrates experimentally and theoretically by introducing {111} copper (Cu) in a {100} Cu grain. Subsequent He implantation and electrical resistivity measurement results suggest that high-density MDAs originated at this {111}/{100} interface could form stable He nanochannels near Cu surface with Gr assistance, manifesting by ultra-low increased ratio of the electrical resistivity (i.e. ~3800% of Cu vs. ~90% of Gr/Cu) after He implantation. Finally, the present findings may provide a new strategy for efficiently managing He and achieving surface protection of advanced metals, merely by depositing a super-rigid material on metal surface to greatly reduce surface energy density.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Electronic correlations and topology in Kondo insulator PuB 6

Utilizing a combination of dynamical mean field theory (DMFT) and density functional theory, it has been theoretically proposed that PuB 6 is a strongly correlated topological insulator characterized by nontrivial 𝐙 2 topological invariants and metallic surface states [X. Deng et al., Phys. Rev. Lett. 111, 176404 (2013)]. Here, we demonstrate through low-temperature magnetotransport measurements and first-principles calculations that PuB 6 exhibits characteristics of a topological Kondo insulating state. These features include a transition in electrical resistivity from high-temperature, thermally activated behavior with a narrow gap at the Fermi level (Δ⁢𝜌 ∼ 20 meV) to a distinctive low-temperature plateau, as well as a surface-to-volume dependence of electrical resistivity at low temperatures. The topological nature of PuB 6 is further supported by the theoretical calculations, which show that GGA + 𝑈 is capable of capturing electronic, topological, and lattice properties of PuB 6 with much lower computational cost than DMFT.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Development of an ERT‐Based Framework for Bentonite Buffers Monitoring From Laboratory Tests: 2. Quantitative Moisture Dynamics Estimation Model

Abstract The long‐term containment of high‐level radioactive waste in geological disposal repositories relies on Engineered Barrier Systems (EBS), with bentonite clay emerging as a candidate material due to its unique properties. Understanding moisture dynamics within bentonite buffers is crucial for EBS performance, as it directly influences the material's swelling capacity, thermal and hydraulic conductivity, mechanical properties, and long‐term evolution under complex thermal‐hydrological‐mechanical (THM) processes. This study develops an advanced Electrical Resistivity Tomography (ERT)‐based framework to quantitatively monitor moisture dynamics under THM conditions. Our framework extends the Waxman‐Smits model to incorporate the coupled effects of temperature, water content, fluid chemistry, and mechanical changes on bentonite's electrical properties. Utilizing HotBENT‐Lab data from our companion paper, which includes electrical conductivity, CT density, and thermocouple measurements, this study offers a novel methodological framework bridging different scales of the model. Our results show that the extended model can estimate water content from ERT data, capturing spatial and temporal variations in moisture distribution within bentonite columns. However, the model tends to overestimate water content compared to CT density‐derived measurements. We address this discrepancy by incorporating a simplified swelling effect model, which improves agreement between ERT and CT density‐based water content estimates. We also discuss model limitations, including simplified treatment of swelling and micropore effects, and propose a conceptual framework for transitioning from laboratory to field applications, addressing challenges such as parameter scalability, field validation methods, and integration of diverse data sources. This ERT‐based framework can potentially advance real‐world moisture monitoring of bentonite‐based EBS in nuclear waste repositories. Plain Language Summary Safely containing high‐level radioactive waste depends on barriers made from materials like bentonite clay, which is effective because it swells and seals in the waste. To ensure these barriers work well over time, it's important to understand how moisture moves through the clay. Our study developed a new method using ERT to monitor moisture levels in bentonite under conditions that mimic those in actual storage sites, including changes in temperature, water content, and mechanical stress. This study improved an existing model to better account for how these factors affect the clay, allowing us to create more accurate moisture maps. Initially, the proposed model overestimated the amount of water in the clay, but its accuracy was improved by factoring in how the clay swells when wet. This study also identified some limitations of the model and suggested ways to adapt it for use in real‐world waste storage sites. This new approach could lead to better monitoring and safety checks for nuclear waste storage systems, helping to ensure long‐term containment. Key Points This work develops an ERT‐based framework extending the Waxman‐Smits model to monitor bentonite moisture dynamics during coupled THM processes The extended model accurately estimates water content from Electrical Resistivity Tomography data, incorporating swelling effects to improve precision This work proposes a conceptual framework for transitioning from laboratory to field applications, advancing EBS monitoring in nuclear waste repositories

Chen, Hang↗
DOE OSTI2022

Phase stability and magnetic and electronic properties of a spark plasma sintered CoFe – P soft magnetic alloy

More efficient power conversion devices are able to transmit greater electrical power across larger distances to satisfy growing global electrical needs. A critical requirement to achieve more efficient power conversion are the soft magnetic materials used as core materials in transformers, inductors, and motors. To that effect it is well known that the use of non-equilibrium microstructures, which are, for example, nanocrystalline or consist of single phase solid solutions, can yield high saturation magnetic polarization and high electrical resistivity necessary for more efficient soft magnetic materials. In this work, we synthesized CoFe – P soft magnetic alloys containing nanocrystalline, single phase solid solution microstructures and studied the effect of a secondary intermetallic phase on the saturation magnetic polarization and electrical resistivity of the consolidated alloy. Single phase solid solution CoFe – P alloys were prepared through mechanically alloying metal powders and phase decomposition was observed after subsequent consolidation via spark plasma sintering (SPS) at various temperatures. The secondary intermetallic phase was identified as the orthorhombic (Co x Fe 1-x ) 2 P phase and the magnetic properties of the (Co x Fe 1-x ) 2 P intermetallic phase were found to be detrimental to the soft magnetic properties of the targeted CoFe – P alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The Zintl pnictides Yb10CdSb9 and Yb14CdSb11: New candidate thermoelectric materials

The synthesis of new materials is the lifeline of solid-state science, and it continues to offer us unique opportunities for testing various theoretical formulations and models on a practical material. Such an avenue, therefore, provides a breeding ground for technological innovations and advancements that can completely revolutionize our world. Here, we report the results of our exploratory syntheses in the Yb–Cd–Sb compositional space that lead to the identification of two new Zintl antimonides, namely, Yb10CdSb9 and Yb14CdSb11. Their crystal structures were established via single-crystal X-ray diffraction methods; the basic electronic and transport properties of the new materials were also characterized. Yb10CdSb9 crystallizes in a disordered variant of the tetragonal Ca10LiMgSb9 structure type with unit cell parameters a = 11.8473(8) Å and c = 17.1302(12) Å (space group P42/mnm). Yb14CdSb11 crystallizes in the tetragonal Ca14AlSb11 structure type with unit cell parameters: a = 16.605(3) Å and c = 12.144(7) Å (space group I41/acd). Although the structures of both compounds can be rationalized within the framework of the Zintl formalism, based on the partitioning of the valence electrons in the much disordered Yb10CdSb9 phase, the charge is indicative of a slightly electron-rich composition. Electronic structure calculations in both cases support the notion of intrinsic semiconductor behavior, as expected for a Zintl phase. The temperature dependence of the electrical resistivity of a single crystal of Yb10CdSb9 is in line with that, and the evolution of the Seebeck coefficient indicates an electron-dominated transport mechanism, and a respectable power factor of 0.71 μW/cm K2 at 460 K can be calculated for Yb10CdSb9. The electrical resistivity of Yb14CdSb11, however, evolves in a semimetallic manner, which could suggest an overdoped sample or degenerate semiconducting behavior.

Ogunbunmi, Michael O. (ORCID:0000000253409198)↗
DOE OSTI2024

Single-crystal growth and characterization of antiferromagnetically ordered EuIn 2

Here, we report the single crystal growth and characterization of EuIn 2 , a magnetic topological semimetal candidate according to our density functional theory (DFT) calculations. We present results from electrical resistance, magnetization, Mössbauer spectroscopy, and X-ray resonant magnetic scattering (XRMS) measurements. We observe three magnetic transitions at T N1 ~ 14.2 K, T N2 ~ 12.8 K and T N3 ~ 11 K, signatures of which are consistently seen in anisotropic temperature dependent magnetic susceptibility and electrical resistance data. Mössbauer spectroscopy measurements on ground crystals suggest an incommensurate sinusoidally modulated magnetic structure below the transition at T N1 ~ 14 K, followed by the appearance of higher harmonics in the modulation on further cooling roughly below T N2 ~ 13 K, before the moment distribution squaring up below the lowest transition around T N3 ~ 11 K. XRMS measurements showed the appearance of magnetic Bragg peaks below T N1 ~ 14 K, with a propagation vector of $τ$ = ($τ_h$, $\overline{τ}_h$, 0), with $τ_h$ varying with temperature, and showing a jump at T N3 ~ 11 K. The temperature dependence of $τ_h$ between ~ 11 K and 14 K shows incommensurate values consistent with the Mössbauer data. XRMS data indicate that $τ_h$ remains incommensurate at low temperatures and locks into $τ_h$ = 0.3443(1).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Properties of photocurrent and metal contacts of highly resistive ultrawide bandgap semiconductors

Ultrawide bandgap (UWBG) semiconductors inherently exhibit very high electrical resistivities. This property presents not only challenges in probing their electrical transport properties but also difficulties to fabricate, understand, and characterize the electrical properties of metal contacts on these materials. Here, we report the measurements and analysis of the applied electric field dependence of photocurrent to reveal the effect of metal contacts on the transport properties of highly resistive h-BN. Our results indicate that even for h-BN with a room temperature resistivity as high as 1014 Ω cm, the as-deposited metal contact is not a completely blocking type as commonly assumed in previous analyses for other large bandgap insulating materials. By modifying the boundary condition between the metal/semiconductor interface, a quantitative description has been obtained, which can be used to determine if the metal contact is Ohmic or blocking type. This quantitative description should be applicable to all UWBG semiconductors with extremely high electrical resistivities. The work also provides a better understanding of how the metal contact type affects the transport properties of UWBG semiconductors in general.

Physics↗
DOE OSTI2022

Observation of Anomalously High Seebeck Coefficients in the Family of Zintl Phase Semiconductors Ca 10 RE CdSb 9 ( RE = Rare-Earth Metal)

This work reports the synthesis, structure and thermoelectric transport properties of the hole-dominated semiconductors with a general formula Ca 10 RECdSb 9 (RE = Y, Ce, Nd, Sm, and Lu). These materials feature unexpectedly high Seebeck coeffi-cients, up to 650 µV/K at 600 K, and electrical resistivities on the order of 1–1000 mΩ·cm, which is an indication of a degen-erate semiconducting state. For example, the Seebeck coeffi-cient observed in Ca 10 NdCdSb 9 (309 µV/K at 600 K) is accom-panied by low and metallic-like electrical resistivity (6 mΩ·cm) and a carrier concentration n = 4.68×10 20 cm –3 . The calculated power factor PF in Ca 10 NdCdSb 9 is 0.88 µW/cm·K 2 at 300 K, and calculations based on the single parabolic band model indi-cate that an optimum PF opt of 1.68 μW/cm·K 2 can be achieved at that temperature for a carrier concentration n opt = 6.62 × 10 19 cm –3 . Here, the estimated thermoelectric figure of merit zT in this material, when properly tuned is expected to surpass zT = 1 at 600 K.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Pressure-Induced Phase Transitions in Bilayer La 3 Ni 2 O 7

La 3 Ni 2 O 7 differs from expectations in part because at ambient pressure, it exists in two polymorphs: an unconventional crystal structure with alternating layers of single- and triple-layered nickel−oxygen octahedra (i.e., La 2 NiO 4 plus La 4 Ni 3 O 10 , with the so-called 1313 crystal structure) and a classical double-layer Ruddlesden−Popper phase (i.e., La 3 Ni 2 O 7 , with the so-called 2222 crystal structure, which dominates at high pressure). In this study, we report the pressure-dependent structural and electrical resistive properties of single crystals of the classical double-layered La 3 Ni 2 O 7 , grown at slightly elevated pressure using the floating-zone method. Structural characterization under pressures up to 15.4 GPa reveals a gradual transition from orthorhombic to tetragonal symmetry that is completed at 12−14 GPa. Additionally, we present pressure and field-dependent electrical resistance measurements up to 27.4 GPa, from which we construct a phase diagram. Although a resistive transition at 80 K is observed at high pressures, the resistive hallmarks of superconductivity are not.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Pozzolanic reactivity of natural pozzolans, ground glasses and coal bottom ashes and implication of their incorporation on the chloride permeability of concrete

It is well understood that the partial replacement of portland cement with pozzolans in sufficient proportions results in improved long-term performance of concrete. However, dwindling availability of the most widely used pozzolan in the construction industry, fly ash, is forecast due to the termination of coal-fired electricity power stations around the world, necessitating the exploration of alternative pozzolans. Experimental investigations are conducted to study the performance of traditional pozzolans such as fly ash, silica fume and natural pozzolans (metakaolin, pumice, perlite and lassenite) together with novel pozzolans, including ground glasses (high-alkali and low-alkali), and ground bottom ash. Twenty-one concrete mixtures are examined for compressive strength, electrical conductivity, electrical resistivity, chloride permeability, and chloride migration coefficient. The reactivity of pozzolans studied is also determined in terms of compressive strength in lime-pozzolan mortar using a modified lime-reactivity test method. Many of the materials tested demonstrate the potential to be used in place of fly ash. However, a wide variation in the performance of these materials is evident which highlights the need for a reliable test to determine the level of reactivity of a pozzolan. The results indicate that the 7-day strength in the modified lime-reactivity test provides a good indication of the pozzolanic reactivity of the material and of how the material can be expected to contribute to the strength and permeability of concrete. The use of electrical resistivity as an indicator of the performance of pozzolans in terms of strength development and chloride penetration resistance when used to partially replace portland cement in concrete is also discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Physical properties of intergrowth compound Eu 2 CuZn 2 P 3

Here, the physical properties of single-crystalline Eu 2 ⁢CuZn 2 ⁢P 3 were inspected via thermodynamic, transport, and neutron diffraction measurements. Eu 2 ⁢ CuZn 2⁢ P 3 is composed of EuCuP and EuZn 2 ⁢ P 2 motifs stacked in a one-to-one ratio. The magnetic response of Eu 2 ⁢ CuZn 2 ⁢ P 3 is similar to that of EuZn 2 ⁢ P 2 in its A-type antiferromagnetic (semiconducting) state. A Néel temperature of T N = 40.3K is obtained from the specific heat capacity. Single-crystal neutron diffraction reveals a (001) magnetic propagation vector, with primarily in-plane moments coupled along [001] in an up-up-down-down pattern. This spin structure retains the ferromagnetic EuCuP motifs and antiferromagnetic coupling across the EuZn 2 ⁢P 2 motifs. The electrical resistivity is characterized by metallic behavior above 100 K, an increase in ρ upon cooling below ≈ 75K, and a large negative magnetoresistance below T N . First principles calculations evidence a narrow band gap for antiferromagnetic ordering and semimetallic behavior for the ferromagnetic state. This is consistent with the observed effect of magnetic field on the electrical resistivity. Hall effect measurements reveal a field-induced, negative anomalous Hall effect that increases on cooling down to 2 K. Also, an unconventional contribution to the Hall effect dominates the low-field Hall signal, particularly near T N , and is similar in appearance to a topological Hall effect. However, further work is necessary to understand if any of the transport properties have topological origins or if magnetism-induced modifications to the Fermi surface induce these unusual Hall effect signals in this and related materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Materials design, synthesis, and transport properties of disordered rare-earth Zintl bismuthides with the anti -Th 3 P 4 structure type

The synthesis, structural elucidation, and transport properties of the extended series Ca 4–x RE x Bi 3 (RE = Y, La–Nd, Sm, Gd–Tm, and Lu; x ≈ 1) and Ca 4–x RE x Bi 3–δ Sb δ (RE = La, Ho, Er, and Lu; x ≈ 1, δ ≈ 1.5) are presented. Structural elucidation is based on single-crystal X-ray diffraction data and confirms the chemical drive of Ca4Bi3 with the cubic anti-Th 3 P 4 structure type (space group I4 ¯3d, no. 220, Z = 4) into a Zintl phase by the introduction of trivalent rare-earth atoms. The structure features complex bonding, heavy elements, and electron count akin to that of valence-precise semiconductors, making it an ideal target for thermoelectrics development. Introducing crystallographic site disorders at the cation site for the Ca 4–x RE x Bi 3 phase and both the cation and anion sites for the Ca 4–x RE x Bi 3–δ Sb δ phase brings about additional desirable characteristics for thermoelectric materials in the context of tuning knobs for lowering thermal conductivity. Electronic structure calculations of idealized Ca 3 YBi 3 and Ca 3 LaBi 3 compounds indicate the opening of indirect bandgaps at the Fermi level with magnitudes Eg = 0.38 eV and 0.57 eV, respectively. The electrical resistivity ρ(T) of some of the investigated phases measured on single crystals evolve in a metallic manner with magnitudes of order 1.4 mΩ cm near 500 K, thus supporting the notion of a degenerate semiconducting state, with the temperature dependence of the Seebeck coefficient α(T) suggesting the p-type behavior. Furthermore, the low electrical resistivity and the realization of a degenerate semiconducting state in the title phases present a window of opportunity for optimizing their carrier concentrations for enhanced thermoelectric performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Development and Testing of an Advanced Cascaded Thermoelectric Residential Heat Pump

Electricity-driven heat pumps using vapor compression cycle are an energy-efficient solution to replace fossil fuel burning and reduce greenhouse gas emissions for space heating in residential buildings. However, heating capacity and Coefficient of Performance (COP) of heat pumps degrade significantly with increasing temperature difference between ambient and indoor environments. Residents and building owners are hence reluctant to fully embrace electric heat pumps. The use of conventional all-electric heat pumps also causes concern for electric utilities due to an increased winter peak demand arising from the use of supplemental electric resistance heaters. Our research is an attempt to alleviate these concerns by designing and laboratory testing a thermoelectric (TE) heat pump cascaded with a vapor compression cycle to enhance heating capacity and COP. TE modules increase the subcooling in the refrigerant liquid of the vapor compression cycle to enlarge the evaporating capacity and works at an efficiency greater than a conventional electric resistance strip. This results in a simple, affordable, efficient and highly controllable solution to adequately meet space heating needs in dwellings. The laboratory testing of the 3-stage cascaded TE heat pump performed in this research has exhibited a higher heating capacity by above 15%, while maintaining a heating COP of 2.0-3.6 in the ambient temperature range of -18˚C to 8˚C (0˚F to 47 ˚F), which represents more than 60% of winter temperatures observed in US. If successfully commercialized, this technology can advance space-heating electrification by overcoming consumer cost barrier of heat pumps.

Shen, Bo↗