SEARCH · Engineering Papers

Results for “dynamic material properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

DOE OSTI2025

In situ atomic-resolution imaging of water vapor–driven multistep oxidation dynamics in strontium cobaltite

Understanding how water vapor interacts with transition metal oxides (TMOs) is critical for tailoring material properties to improve performance and enable new technologies. Despite extensive research efforts, atomic-scale mechanisms underpinning dynamic reactions and reaction-induced phase transitions remain elusive. Here, we use in situ environmental transmission electron microscopy to investigate how water vapor oxidizes vacancy-ordered SrCoO 2.5 at moderately elevated temperatures, demonstrating that water molecules can initiate oxidation more effectively than oxygen under comparable conditions. We discover a distinct “staging” behavior during the oxidation process: A fully ordered intermediate phase, SrCoO 2.75 , forms before transitioning into a near-perovskite SrCoO 3−δ . In addition, antiphase boundaries, originating at step terraces of SrTiO 3 , alleviate strain by creating reversible nanoscale “gaps” during lattice contraction under oxidation, providing a pathway for preserving structural integrity throughout redox cycling. This work provides atomic-level guidance for engineering TMOs by leveraging water vapor to control their redox behavior and tailor functional properties.

Science & Technology - Other Topics↗

NASA NTRS1979

Dynamic properties of elastomer cartridge specimens under a rotating load

This paper presents the results of a program of analysis and test to determine the dynamic properties of elastomer cartridges operating under a rotating load. These measured properties were compared to predictions based on results of unidirectional tests with the same elastomer material. The test method for the dynamic stiffness and damping measurements was essentially the same as the Base Excitation Resonant Mass Method. The primary difference is that the exciting force used for these most recent tests was exerted by rotating unbalance in a rotational test rig rather than a shake table. The specimens tested were: two rectangular cross-section, continuous ring cartridges of different cross-section and three cylindrical button cartridges of different button thickness. Tests were performed for strains from about 0.0001 to about 0.01 (double amplitude). Material properties and prediction equations determined from reciprocating tests were used to make numerical predictions of stiffness, damping, and loss coefficient for the test elements, with encouraging results. Strain was shown to be an important parameter in determining these dynamic properties, particularly damping and loss coefficient.

Darlow, M. S.↗

DOE OSTI2025

Materials Selection Principles for Designing Electro‐Thermal Neurons

Artificial neurons exhibiting volatile threshold switching and action potential‐like oscillations are crucial for brain‐inspired computing. While Complimentary Metal‐Oxide‐Semiconductor (CMOS)‐based strategies require hundreds of transistors to simulate each neuron, neuronal oscillations arise spontaneously in individual electro‐thermal devices due to nonlinearities like the Mott transition in VO 2 . Despite improved understanding of the physics, quantitative connections between neuronal performance and material properties remain under‐explored, preventing predictive neuron design and rational materials selection. In this work, a physics‐aware forward design methodology is developed for interrogating a wide palette of materials with properties varying by orders of magnitude, and their performance (high frequency, high dynamical reconfigurability and low power) under external circuit and device geometry constraints is assessed. The space of viable materials is identified to be much larger than previously recognized, with candidates from a range of materials classes, including Ge, GaP and MoS 2 . CMOS‐compatible performance (such as 100 GHz oscillating frequencies) can be achieved with CMOS‐compatible node sizes (≈10 nm). Finally, combinations of material properties yielding desired neuronal performance under uncertain design constraints are considered. This work solidifies forward design principles for electro‐thermal neuron devices, a necessary pre‐condition for inverse design from desired neuronal performance to required materials properties.

compact model↗

DOE OSTI2025

Should I stay or should I flow? An exploration of phase‐separated metallosupramolecular liquid crystal polymers

Abstract Dynamic liquid crystalline polymers (dLCPs) incorporate both liquid crystalline mesogens and dynamic bonds into a single polymeric material. These dual functionalities impart order‐dependent thermo‐responsive mechano‐optical properties and enhanced reprocessability/programmability enabling their use as soft actuators, adaptive adhesives, and damping materials. While many previous works studying dynamic LCPs utilize dynamic covalent bonds, metallosupramolecular bonds provide a modular platform where a series of materials can be accessed from a single polymeric feedstock through the variation of the metal ion used. A series of dLCPs were prepared by the addition of metal salts to a telechelic 2,6‐bisbenzimidazolylpyridine (Bip) ligand endcapped LCP to form metallosupramolecular liquid crystal polymers (MSLCPs). The resulting MSLCPs were found to phase separate into hard and soft phases which aids in their mechanical robustness. Variations of the metal salts used to access these materials allowed for control of the thermomechanical, viscoelastic, and adhesive properties with relaxations that can be tailored independently of the mesogenic transition. This work demonstrates that by accessing phase separation through the incorporation of metallosupramolecular moieties, highly processable yet robust MSLCP materials can be realized. This class of materials opens the door to LCPs with bulk flow behavior that can also be utilized as multi‐level adhesives.

Chemistry↗

DOE OSTI2025

Calibration and characterization of the line-VISAR diagnostic at the HED-HIBEF instrument at the European XFEL

In dynamic-compression experiments, the line-imaging Velocity Interferometer System for Any Reflector (VISAR) is a well-established diagnostic used to probe the velocity history, including wave profiles derived from dynamically compressed interfaces and wavefronts, depending on material optical properties. Knowledge of the velocity history allows for the determination of the pressure achieved during compression. Such a VISAR analysis is often based on Fourier transform techniques and assumes that the recorded interferograms are free from image distortions. In this paper, we describe the VISAR diagnostic installed at the HED-HIBEF instrument located at the European XFEL along with its calibration and characterization. It comprises a two-color (532, 1064 nm), three-arm (with three velocity sensitivities) line imaging system. We provide a procedure to correct VISAR images for geometric distortions and evaluate the performance of the system using Fourier analysis. We finally discuss the spatial and temporal calibrations of the diagnostic. As an example, we compare the pressure extracted from the VISAR analysis of shock-compressed polyimide and silicon.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

Prospects for Antiferromagnetic Spintronic Devices

This article examines recent advances in the field of antiferromagnetic spintronics from the perspective of potential device realization and applications. We discuss advances in the electrical control of antiferromagnetic order by current-induced spin–orbit torques, particularly in antiferromagnetic thin films interfaced with heavy metals. We also review possible scenarios for using voltage-controlled magnetic anisotropy as a more efficient mechanism to control antiferromagnetic order in thin films with perpendicular magnetic anisotropy. Next, we discuss the problem of electrical detection (i.e., readout) of antiferromagnetic order and highlight recent experimental advances in realizing anomalous Hall and tunneling magnetoresistance effects in thin films and tunnel junctions, respectively, which are based on noncollinear antiferromagnets. Understanding the domain structure and dynamics of antiferromagnetic materials is essential for engineering their properties for applications. For this reason, we then provide an overview of imaging techniques as well as micromagnetic simulation approaches for antiferromagnets. Finally, we present a perspective on potential applications of antiferromagnets for magnetic memory devices, terahertz sources, and detectors.

36 MATERIALS SCIENCE↗

NASA NTRS1978

Continuum models for beam-like and plate-like lattice structures

A simple, rational approach is presented for developing continuum models for large repetitive beam-like and plate-like lattices with arbitrary configurations subjected to static, thermal and dynamic loadings. The continuum models for these structures are shear flexible beams and plates. They account for local effects in the repeating element of the actual structure and are characterized by their thermoelastic strain and kinetic energies from which the equations of motion and constitutive relations can be derived. The procedure for developing the expressions for thermoelastic strain and kinetic energies of the continuum involves introducing basic assumptions regarding the variation of the temperature, displacement and strain components in one or two directions (for plate-like and beam-like lattices) and obtaining effective thermoelastic and dynamic coefficients of the continuum in terms of material properties and geometry of the original lattice structure. The high accuracy of the continuum models developed is demonstrated by means of numerical examples.

Noor, A. K.↗

NASA NTRS1986

Clump 1 - An unusual molecular cloud complex near the Galactic center

The properties of the (C-12)O and (C-13)O emission from Clump I, a complex of molecular clouds which shows the largest noncircular velocities of any molecular material known in the Milky Way, are studied. Observations of the J = 1-0 rotational transitions of the above molecules are reported, and the large-scale distribution and kinematics of the molecular gas in the direction of Clump I are discussed. The small-scale structure is described based on one arcmin resolution of (C-13)O data. Physical properties of the molecular material are derived, and the dynamics of the Clump I clouds are discussed in the context of their stability against Galactic tidal forces. It is concluded that all the clouds in the complex are gravitationally bound, although their outer envelopes may be tidally disrupted by the Galactic potential. The relative motion of the clouds is qualitatively similar to giant molecular cloud complexes in spiral arms of the outer Galactic disk, but the velocities are higher.

Bania, T. M.↗

NASA NTRS1991

Computational simulation of acoustic fatigue for hot composite structures

Predictive methods/computer codes for the computational simulation of acoustic fatigue resistance of hot composite structures subjected to acoustic excitation emanating from an adjacent vibrating component are discussed. Select codes developed over the past two decades at the NASA Lewis Research Center are used. The codes include computation of acoustic noise generated from a vibrating component, degradation in material properties of a composite laminate at use temperature, dynamic response of acoustically excited hot multilayered composite structure, degradation in the first ply strength of the excited structure due to acoustic loading, and acoustic fatigue resistance of the excited structure, including the propulsion environment. Effects of the laminate lay-up and environment on the acoustic fatigue life are evaluated. The results show that, by keeping the angled plies on the outer surface of the laminate, a substantial increase in the acoustic fatigue life is obtained. The effect of environment (temperature and moisture) is to relieve the residual stresses leading to an increase in the acoustic fatigue life of the excited panel.

Singhal, Surendra N.↗

NASA NTRS1993

Clementine 2: a Double Asteroid Flyby and Impactor Mission

Recently JPL was asked by SDIO to analyze and develop a preliminary design for a deep-space mission to fly by two near-Earth asteroids, Eros and Toutatis. As a part of this mission, JPL was also asked to assess the feasibility of deploying a probe on approach to impact Toutatis. This mission is a candidate for SDIO's Clementine 2. SDIO's motivations were to provide further demonstrations of precision, autonomous navigation for controlling the flight paths of both a spacecraft and a probe. NASA's interest in this mission is driven by the opportunity to obtain the first close-up images and other scientific measurements from a spacecraft of two important near-Earth objects. For Toutatis this is especially important since it was observed and imaged extensively just last Dec. using Earth-based radar; Clementine 2 will provide the opportunity to corroborate the radar data and validate the ultimate potential of the radar technique. Scientifically, the probe impact at Toutatis will allow the acquisition of data pertaining to the dynamic strength of surface material and data on the properties of the regolith and on stratification below the surface, and will potentially allow the measurement of thermal diffusivity between the interior and the surface. These determinations will be accomplished by means of high-resolution imagery of the impact crater and its surroundings in visible, ultraviolet, and infrared wave bands from the spacecraft flying by some 30 min. after the probe strike. In addition, if the spacecraft can be equipped with a lightweight mass spectrometer and dust analyzer, the potential also exists to measure the particle sizes and distribution and the composition of the eject a cloud. This mission is planned to be launched in Jul. 1995, with the Eros encounter on 13 Mar. 1996, and the Toutatis flyby on 4 Oct. 1996, some 440 days after launch.

Boain, R. J.↗

NASA NTRS1956

Interim Report on Fatigue Characteristics of a Typical Metal Wing

Constant amplitude fatigue tests of seventy-two P-51D "Mustang" wings are reported. The tests were performed by a vibrational loading system and by an hydraulic loading device for conditions with and without varying amounts of pre-load. The results indicate that: (a) the frequency of occurrence of fatigue at any one location is related to the range of the loads applied, (b) the rate of propagation of visible cracks is more or less constant for a large portion of the life of the specimen, (c) the fatigue strength of the structure is similar to that of notched material having a theoretical stress concentration factor of more than 3.0, (d) the frequency distribution of fatigue life is approximately logarithmic normal, (e) the relative increase in fatigue life for a given pre-load depends on the maximum load of the loading cycle only, while the optimum pre-load value is approximately 85 percent of the ultimate failing load, and (f) that normal design procedure will not permit the determination of local stress levels with sufficient accuracy to determine the fatigue strength of an element of a redundant structure.

LOADS AND STRESSES, STRUCTURAL - REPEATED DYNAMIC↗

NASA NTRS1996

Passive Optical Sample Assembly (POSA-2) Space Flight Experiment

NASA Lewis Research Center's Electro-Physics Branch is participating in the POSA-2 Space Flight Experiment to assess the effects of low Earth orbit and spacecraft environment contamination on power system materials and surfaces. This experiment package will be flown for 1 year in low Earth orbit and will be returned to Earth for subsequent evaluation of optical and thermal properties. Representative samples of solar array blanket materials, solar dynamic reflector materials, thermal control coatings, and sapphire are included in the experiment package.

Source record↗

DOE OSTI2026

Dynamic compression and spallation behavior of NbTaTiVZr high-entropy alloy

High-entropy alloys are a new class of materials with promising properties for aerospace and defense applications. The unique behavior of these materials is driven by the complex interactions between dissimilar atoms in a crystal and requires combined theoretical and experimental efforts to unlock their full potential. Here, we evaluate the relationship between the microstructure and the dynamic response of the equiatomic NbTaTiVZr alloy. Specifically, the shock Hugoniot, or equation of state, was measured up to a particle velocity of 0.5 mm μs −1 using gas gun plate impacts. Shock wave profile and incipient spallation experiments were used to characterize wave propagation and damage formation with post-mortem recovery experiments. Molecular dynamics simulations confirm the experimental findings and extend them up to 2.1 mm μs −1 particle velocity. Computational thermodynamic calculation of phase diagram simulations explain details of the material microstructure, which explains the measured strength and experimental damage patterns. Overall, this work provides detailed high-strain-rate characterization of a refractory high-entropy alloy, and more importantly, a framework and demonstration of the utility and necessity of a combined theoretical and experimental approach, outlining the importance of considering processing and manufacturing conditions when evaluating the performance of new materials.

36 MATERIALS SCIENCE↗

NASA NTRS1995

Aperture Shield Materials Characterized and Selected for Solar Dynamic Space Power System

The aperture shield in a solar dynamic space power system is necessary to prevent thermal damage to the heat receiver should the concentrated solar radiation be accidentally or intentionally focused outside of the heat receiver aperture opening and onto the aperture shield itself. Characterization of the optical and thermal properties of candidate aperture shield materials was needed to support the joint U.S./Russian solar dynamic space power effort for Mir. The specific objective of testing performed at the NASA Lewis Research Center was to identify a high-temperature material with a low specular reflectance, a low solar absorptance, and a high spectral emittance so that during an off-pointing event, the amount of solar energy reflecting off the aperture shield would be small, the ratio of solar absorptance to spectral emittance would provide the lowest possible equilibrium temperature, and the integrity of the aperture shield would remain intact.

Source record↗

DOE OSTI2026

Programmable hydrogels by combining persistent and transient dynamic bonds

Out-of-equilibrium chemistry is currently being applied to polymer systems to mimic the autonomous behavior of biological materials. In this study, hydrogels with self-healing properties were developed that combine persistent crosslinks from dynamic metal-ligand coordination with transient crosslinks from dynamic anhydride bonds. Polymers containing terpyridine ligands and carboxylic acid groups were synthesized and crosslinked with divalent metal ions (Fe 2+ , Ni 2+ , Co 2+ , Zn 2+ , Cu 2+ ). The coordination bonds from terpyridine–metal coordination impart persistent stability, while transient anhydrides formed on treatment with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC) temporarily increase crosslink density. Distinct behaviors are observed depending on the choice of metal, with Ni 2+ forming robust, stable networks; Zn 2+ creating moderately dynamic gels; and Cu 2+ yielding highly dynamic, soft materials. Treatment with EDC increased storage moduli significantly, with transient effects lasting up to 280 min depending on the metal ion. Self-healing experiments demonstrated independent contributions from metal coordination and transient anhydrides, enabling recovery of stress and strain under varying conditions. Additionally, complex and reversible 2D stiffness patterns were generated by spatially controlled EDC treatment of Zn 2+ and Cu 2+ hydrogel films, demonstrating programmability and reusability.

Rajawasam, Chamoni W. H. [Miami University, Oxford↗

DOE OSTI2024

Efficient and Robust Dynamic Crosslinking for Compatibilizing Immiscible Mixed Plastics through In Situ Generated Singlet Nitrenes

Abstract Creating a sustainable economy for plastics demands the exploration of new strategies for efficient management of mixed plastic waste. The inherent incompatibility of different plastics poses a major challenge in plastic mechanical recycling, resulting in phase‐separated materials with inferior mechanical properties. Here, this study presents a robust and efficient dynamic crosslinking chemistry that effectively compatibilizes mixed plastics. Composed of aromatic sulfonyl azides, the dynamic crosslinker shows high thermal stability and generates singlet nitrene species in situ during solvent‐free melt‐extrusion, effectively promoting C─H insertion across diverse plastics. This new method demonstrates successful compatibilization of binary polymer blends and model mixed plastics, enhancing mechanical performance and improving phase morphology. It holds promise for managing mixed plastic waste, supporting a more sustainable lifecycle for plastics.

Chemistry↗

DOE OSTI2026

Online LIBS–ML Framework for Dynamic Characterization of Heterogeneous Waste-Derived Gasification Feedstocks

LIBS−ML framework for real time feedstock characterization during continuous conveyor transport Heterogeneous waste derived feedstocks (e.g., waste coal, biomass and blends) introduce rapid variability in heating value and ash chemistry that affect gasifier operation, yet conventional laboratory characterization techniques are too slow to support proactive control. To address this gap, this study reports on an online, in situ, dynamic characterization framework that couple’s laser-induced breakdown spectroscopy (LIBS) with leakage safe machine learning (ML) regression to deliver real time, decision quality predictions of gasifier relevant properties. A controlled sample matrix spanning two different waste coals, two different biomasses, and engineered blends under two particle size conditions were constructed and benchmarked using standardized laboratory analyses for proximate/ultimate properties and ash composition. LIBS spectra were acquired dynamically as material flowed on a conveyor belt, using high energy 1064 nm laser ablation and shot averaging to improve repeatability and precision. Supervised regression models (multi layer perceptron (MLP) /artificial neural network (ANN), random forest (RF), and support vector regression (SVR)) and an optimized weighted ensemble were trained on emission line feature sets using nested cross validation with Bayesian hyperparameter tuning and validated against an independent hold out set. The proposed LIBS−ML workflow achieves near laboratory predictive fidelity across parametric targets (including higher heating value (HHV), ash content, fixed carbon, sulfur, major ash forming oxides, and initial deformation temperature (IDT)), with the weighted ensemble providing a robust default predictor under dynamic measurement conditions. These results demonstrate a practical pathway for real time feedstock characterization that can enable feedforward adjustments and more resilient gasifier operation for variable quality waste derived fuels.

Biomass↗

NASA NTRS2010

Raman Scattering in a New Carbon Material

Samples of a new carbon material, Diamonite-B, were fabricated under high pressure from a commercial carbon black--identified as mixed fullerenes. The new material is neither graphite-like nor diamond-like, but exhibits electrical properties close to graphite and mechanical properties close to diamond. The use of Raman spectroscopy to investigate the vibrational dynamics of this new carbon material and to provide structural characterization of its short-, medium- and long-range order is reported. We also provide the results of investigations of these samples by high-resolution electron microscopy and X-ray diffraction. Hardness, electrical conductivity, thermal conductivity and other properties of this new material are compared with synthetic graphite-like and diamond-like materials, two other phases of synthetic bulk carbon.

Voronov, O. A.↗