Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed wind siting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Cloud condensation nuclei characteristics at the Southern Great Plains site: role of particle size distribution and aerosol hygroscopicity

The activation ability of aerosols as cloud condensation nuclei (CCN) is crucial in climate and hydrological cycle studies, but their properties are not well known. We investigated the long-term measurements of atmospheric aerosol properties, CCN concentrations (N CCN ) at supersaturation (SS = 0.1%–1.0%), and hygroscopicity at the Department of Energy's Southern Great Plains (SGP) site to illustrate the dependence of N CCN on aerosol properties and transport pathways. Cluster analysis was applied to the back trajectories of air masses to investigate their respective source regions. The results showed that aged biomass burning aerosols from Central America were characterized by higher accumulation mode particles (N accu ; median value 805 cm -3 ) and relatively high aerosol hygroscopicity (κ; median value ~0.25) values that result in the higher CCN activation and relatively high N CCN (median value 258–1578 cm -3 at a SS of 0.1%–1.0%). Aerosols from the Gulf of Mexico were characterized by higher N accu (~35%), and N CCN (230–1721 cm -3 at a SS of 0.1%–1.0%) with the lowest κ (~0.17). In contrast, relatively high nucleation mode particles (N nucl ; ~20%) and low N CCN (128–1553 cm -3 at a SS of 0.1%–1.0%) with higher κ (~0.30) values were observed on the aerosols associated with a westerly wind. The results indicate particle size as the most critical factor influencing the ability of aerosols to activate, whereas the effect of chemical composition was secondary. Our CCN closure analysis suggests that chemical composition and mixing state information are more crucial at lower SS, whereas at higher SS, most particles become activated regardless of their chemical composition and size. This study affirms that soluble organic fraction information is required at higher SS for better N CCN prediction, but both the soluble organics fraction and mixing state are vital to reduce the N CCN prediction uncertainty at lower SS.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Role of mechanical stress localizations on the radiation hardness of AlGaN/GaN high electron mobility transistors

Multi-material, multi-layered systems such as AlGaN/GaN high electron mobility transistors (HEMTs) contain residual mechanical stresses that arise from sharp contrasts in device geometry and materials parameters. These stresses, which can be either tensile or compressive, are difficult to detect and eliminate because of their highly localized nature. We propose that their high-stored internal energy makes potential sites for defect nucleation sites under radiation, particularly if their locations coincide with the electrically sensitive regions of a transistor. In this study, we validate this hypothesis with molecular dynamic simulation and experiments exposing both pristine and annealed HEMTS to 2.8 MeV Au +3 irradiation. Our unique annealing process uses mechanical momentum of electrons, also known as the electron wind force (EWF) to mitigate the residual stress at room temperature. High-resolution transmission electron microscopy and cathodoluminescence spectra reveal the reduction of point defects and dislocations near the two-dimensional electron gas region of EWF-treated devices compared to pristine devices. The EWF-treated HEMTs showed relatively higher resilience with approximately 10% less degradation of drain saturation current and ON-resistance and 5% less degradation of peak transconductance. Both mobility and carrier concentration of the EWF-treated devices were less impacted compared to the pristine devices. Our results suggest that the lower density of nanoscale stress localization contributed to the improved radiation tolerance of the EWF-treated devices. Intriguingly, the EWF is found to modulate the defect distribution by moving the defects to electrically less sensitive regions in the form of dislocation networks, which act as sinks for the radiation induced defects and this assisted faster dynamic annealing.

AlGaN/GaN HEMTs↗
DOE OSTI2026

The biogeography of soil and airborne fungi in the Southwestern USA in relation to climate and vegetation

To assess how fungal dispersal might respond to climate change, we examined how climate and geography influence the regional distribution of fungi in soil and air. Specifically, we hypothesized that neighboring fungal communities should be more similar than distant communities (i.e. spatially autocorrelated) and that fungal dispersal should be more limited in soil than in air. We collected soil and air samples from 60 sites across five states in the Southwestern USA. Then, we sequenced the ITS2 region to identify fungal taxa in each sample. Next, we used distance-based redundancy analysis to partition variation in fungal community composition between climate variables and spatial structure. Fungi were indeed spatially autocorrelated. Moreover, precipitation, maximum vapor pressure deficit, and soil moisture were significantly related to fungal community composition in soils. In comparison, only precipitation was significantly related to community composition in the air. After accounting for climate, the strength of spatial autocorrelation did not differ significantly in soilborne versus airborne fungi. Dispersal limitation was evident in soilborne fungi at short distances (<100 km) and was not observed at any distance in airborne fungi. Altogether, climate may influence which fungal taxa are present in soil and air, and fungi could feasibly wind disperse over regional scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Are Marine Low Cloud Droplet Concentrations Buffered by Entrained Aitken‐Mode Aerosol (Final Technical Report)

During the summertime, the high-latitude oceans come to life with green phytoplankton, which gain their energy from sunlight and are food for sea creatures small and large. When the phytoplankton are eaten or die, sulfur-rich gases are released under the ocean surface and mix into the air. Observations suggest that, over the Southern Ocean, frequent storms lift this air high into the atmosphere while raining out particulates like salt. As a result, the sulfur-rich air then spawns high concentrations of small ‘Aitken-mode’ aerosol particles. We hypothesize that these particles work their way down into the marine boundary layer, where they can replenish the supply of cloud-condensation nuclei scavenged by frequent precipitation. Further, this process maintains high concentrations of liquid cloud droplets in austral summer, promoting more sunlight to be reflected to space. We call this ‘Aitken buffering’. The primary objective of this project has been to document and test what role Aitken-mode aerosols play in clouds over the Southern Ocean and elsewhere. This effort has included three main components: 1) developing a computer model that realistically simulates the aerosol processes and the small-scale turbulent air motions that move aerosols around and create the clouds, 2) using that model to interpret and extend these observations for process understanding, by allowing different factors that contribute to the aerosol budget, such as surface wind speed, precipitation, surface gas exchange, etc. to be separated, and 3) studying Aitken-mode aerosol and its variability with a focus over the Southern Ocean and Antarctica, using data from Atmospheric Radiation Measurement (ARM) sites and other available observations. Initial computer studies in more idealized conditions found that elevated concentrations of Aitken-mode aerosols above the clouds could help prevent the breakup of those clouds by acting as cloud-condensation nuclei after they were entrained into the cloudy boundary layer. Simulations of a day during the ACE-ENA field campaign showed that Aitken-mode aerosols could also prevent cloud breakup under more realistic conditions. A new method that extracts information about Aitken-mode aerosols from measurements of aerosols onto which cloud droplets can form finds that Aitken-mode aerosols do vary seasonally over the Southern Ocean, with a peak in summertime, as described above. Other work during this project has focused on understanding how patterns of water vapor, clouds and precipitation are coupled within low-lying clouds over the oceans, and also on how cloud droplets cluster within clouds and how the distribution of cloud droplet sizes change as dry air is mixed into clouds, with the latter studies also using observations from ACE-ENA.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Particle Acceleration in Magnetic Reconnection with Ad Hoc Pitch-angle Scattering

Particle acceleration during magnetic reconnection is a long-standing topic in space, solar, and astrophysical plasmas. Recent 3D particle-in-cell simulations of magnetic reconnection show that particles can leave flux ropes due to 3D field-line chaos, allowing particles to access additional acceleration sites, gain more energy through Fermi acceleration, and develop a power-law energy distribution. This 3D effect does not exist in traditional 2D simulations, where particles are artificially confined to magnetic islands due to their restricted motions across field lines. Full 3D simulations, however, are prohibitively expensive for most studies. Here, we attempt to reproduce 3D results in 2D simulations by introducing ad hoc pitch-angle scattering to a small fraction of the particles. We show that scattered particles are able to transport out of 2D islands and achieve more efficient Fermi acceleration, leading to a significant increase of energetic particle flux. We also study how the scattering frequency influences the nonthermal particle spectra. This study helps achieve a complete picture of particle acceleration in magnetic reconnection.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Keep it short: Exploring the impacts of configuration choices on the recent economics of solar-plus-battery and wind-plus-battery hybrid energy plants

Coupled renewable-battery powerplants differ from the traditional concept of independent siting of electricity resources within transmission networks. Prior research on the value proposition and cost savings from coupling did not consider the geographic constraint of co-location. This paper fills the gap by assessing how pricing volatility differences between nodes within electricity markets impact the system value of coupled renewable-battery projects as compared to independent VRE and battery installations. We use wholesale power market prices from 2012–2019 across the seven main U.S. independent system operators (ISOs) with a linear optimization program to compare the electricity market value of coupled projects to the value of the same underlying sub-components, deployed separately. We find that additional value from adding a 4-hour battery sized to 50% of renewable-plant nameplate capacity is $\$10$/MWh across ISOs on average. The highest boost occurs in California ($\$15$/MWh), where the value of adding storage to solar rises over time in tandem with increased solar penetration in the region. If renewables and batteries are deployed independently, we estimate that $\$12.5$/MWh of additional value could be achieved because of more flexibility on battery siting and operation. The $\$12.5$/MWh coupling penalty is reduced to $\$1.6$/MWh when considering alternative approaches to integrating battery storage. This result implies that renewable-battery power plants will play an increasing role in electricity systems if they can be built for $\$2$–$\$13$/MWh less than independent projects of comparable size. However, the wide regional variation in coupling penalties, along with the importance of conditions captured in our sensitivity cases, suggests the tradeoff between coupling penalties and savings will vary by situation. Therefore, roles exist for independent and coupled projects from a system optimization perspective.

14 SOLAR ENERGY↗
DOE OSTI2020

Identifying a regional aerosol baseline in the eastern North Atlantic using collocated measurements and a mathematical algorithm to mask high-submicron-number-concentration aerosol events

Abstract. High-time-resolution measurements of in situ aerosol and cloud properties provide the ability to study regional atmospheric processes that occur on timescales of minutes to hours. However, one limitation to this approach is that continuous measurements often include periods when the data collected are not representative of the regional aerosol. Even at remote locations, submicron aerosols are pervasive in the ambient atmosphere with many sources. Therefore, periods dominated by local aerosol should be identified before conducting subsequent analyses to understand aerosol regional processes and aerosol–cloud interactions. Here, we present a novel method to validate the identification of regional baseline aerosol data by applying a mathematical algorithm to the data collected at the U.S. Department of Energy's (DOE) Atmospheric Radiation Measurement (ARM) user facility in the eastern North Atlantic (ENA). The ENA central facility (C1) includes an aerosol observing system (AOS) for the measurement of aerosol physical, optical, and chemical properties at time resolutions from seconds to minutes. A second temporary supplementary facility (S1), located ∼0.75 km from C1, was deployed for ∼1 year during the Aerosol and Cloud Experiments (ACE-ENA) campaign in 2017. First, we investigate the local aerosol at both locations. We associate periods of high submicron number concentration (Ntot) in the fine-mode condensation particle counter (CPC) and size distributions from the Ultra-High Sensitivity Aerosol Spectrometer (UHSAS) as a function of wind direction using a meteorology sensor with local sources. Elevated concentrations of Aitken-mode (< 100 nm diameter) particles were observed in correspondence with the wind directions associated with airport operations. At ENA, the Graciosa Airport and its associated activities were found to be the main sources of high-concentration aerosol events at ENA, causing peaks in 1 min Ntot that exceeded 8000 and 10 000 cm−3 at C1, in summer and winter, respectively, and 5000 cm−3 at S1 in summer. Periods with high Ntot not associated with these wind directions were also observed. As a result, the diverse local sources at ENA yielded a poor relationship between Ntot measurements collected at C1 and S1 (R2=0.03 with a slope =0.05±0.001). As a first approach to mask these events, the time periods when the wind direction was associated with the airport operations (west to northwest and southeast to south at C1 and east to south at S1) were applied. The meteorological masks removed 38.9 % of the data at C1 and 43.4 % at S1, and they did not significantly improve the relationship between the two sites (R2=0.18 with a slope =0.06±0.001). Due to the complexity of high-Ntot events observed at ENA, we develop and validate a mathematical ENA Aerosol Mask (ENA-AM) to identify high-Ntot events using 1 min resolution data from the AOS CPC at C1 and S1. After its parameterization and application, ENA-AM generated a high correlation between Ntot in the summer at C1 and S1 (R2=0.87 with a slope =0.84±0.001). We identified the regional baseline at ENA to be 428±228 cm−3 in the summer and 346±223 cm−3 in the winter. Lastly, we compared masked measurements from the AOS with the ARM Aerial Facility (AAF) during flights over C1 in the summer to understand submicron aerosol vertical mixing over C1. The high correlation (R2=0.71 with a slope of 1.04±0.01) observed between C1 and the AAF Ntot collected within an area of 10 km surrounding ENA and at altitudes < 500 m indicated that the submicron aerosol at ENA was well mixed within the first 500 m of the marine boundary layer during the month of July during ACE-ENA. Our novel method for determining a regional aerosol baseline at ENA can be applied to other time periods and at other locations with validation by a secondary site or additional collocated measurements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Ultra-Short-Term Spatiotemporal Forecasting of Renewable Resources: An Attention Temporal Convolutional Network Based Approach

The rapid increase in the penetration of renewable energy resources characterized by high variability and uncertainty is bringing new challenges to the power system operation. To ensure the efficient and reliable operation of electric grid, an accurate and general short-term forecasting algorithm with interpretability is desired. Moreover, the extensive off-site information provided by the proliferation of new renewable plants stimulates the interests in the spatiotemporal forecasting. In this paper, an attention temporal convolutional network, which is built on stacked dilated causal convolutional networks and attention mechanisms, is proposed to perform the ultra-short-term spatiotemporal forecasting of renewable resources. Compared with the existing spatiotemporal forecasting methods, the presented model needs no domain knowledge and can be applied to different forecasting tasks such as solar generation and wind speed forecasting. Here, the attention mechanism improves the interpretability. The algorithm can be used to produce both point and probabilistic forecasts. Numerical results on the data sets from National Renewable Energy Laboratory show superior performance over five baselines, in terms of skill scores. Compared with the baselines, the average improvements of accuracy introduced by the proposed method for the point and probabilistic forecasting are 15.08% and 15.85%, respectively.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Electron-Only Reconnection in Plasma Turbulence

Hybrid-Vlasov–Maxwell simulations of magnetized plasma turbulence including non-linear electron-inertia effects in a generalized Ohm's law are presented. When fluctuation energy is injected on scales sufficiently close to ion-kinetic scales, the ions efficiently become de-magnetized and electron-scale current sheets largely dominate the distribution of the emerging current structures, in contrast to the usual picture, where a full hierarchy of structure sizes is generally observed. These current sheets are shown to be the sites of electron-only reconnection (e-rec), in which the usual electron exhausts are unaccompanied by ion outflows and which are in qualitative agreement with those recently observed by MMS in the Earth's turbulent magnetosheath, downstream of the bow shock. Some features of the e-rec phenomenology are shown to be consistent with an electron magnetohydrodynamic description. Simulations suggest that this regime of collisionless reconnection may be found in turbulent systems where plasma processes, such as micro-instabilities and/or shocks, overpower the more customary turbulent cascade by directly injecting energy close to the ion-kinetic scales.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Test methodology for validation of multi-frequency models of renewable energy generators using small-signal perturbations

Providing trustworthy and accurate multi-frequency (or harmonic) models for renewable energy generators (REG) is an ongoing challenge for harmonic studies. There have been effective attempts to propose and design a test device to validate the harmonic models, mainly based on shunt current perturbations. However, using additional devices for perturbations is costly for converter-based test sites. This paper provides the test specifications to extend the application of the grid emulators for voltage perturbations and appropriate harmonic model validation. Besides, the effects of the sequence couplings, initial emissions, and power set-points on the test results have been overlooked in the literature. Considering these effects, this paper proposes a generic test methodology to obtain more accurate models in the sequence domain. The experimental verification of the proposed methodology is demonstrated using a 7 MVA grid emulator for testing of a 2 MVA photo-voltaic converter and a 2 MVA Type 3 wind turbine. This way, the test challenges, specifications, and recommendations are presented using the MW-scale experiments on different REGs. Furthermore, the effects of sequence couplings and initial emissions on the calculation results are investigated and compared. The proposed methodology is applicable for harmonic model validation as well as empirical modelling.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

The sources and diurnal variations of submicron aerosols in a coastal–rural environment near Houston, US

Aerosol properties were characterized at a rural site southwest of Houston from May to September 2022 during the intensive operation periods (IOPs) of the Tracking Aerosol Convection Interactions ExpeRiment (TRACER). Backward trajectory analysis reveals three major air mass types: marine air mass from the Gulf, urban air mass influenced by urban emissions, and regional air mass. Marine aerosols typically show a bimodal size distribution and have the lowest particle number and mass concentrations of PM 1 (particulate matter with an aerodynamic diameter of less than 1 µm), while aerosols from air masses strongly influenced by urban emissions exhibit the highest concentrations. Organic aerosol (OA) accounts for more than 50 % of PM 1 for urban and regional air masses, whereas sulfate is comparable to OA in marine air masses. Positive matrix factorization (PMF) analysis of aerosol mass spectra identifies 6 OA factors: hydrocarbon-like OA (HOA), OA from the oxidation of monoterpenes (MT-SOA), OA from the reactive uptake of isoprene epoxydiols by acidic sulfate particles (isoprene-SOA), oxygenated OA arising from shipping emissions (shipping-OOA), and two oxygenated OA factors with high O : C ratios (OOA1 and OOA2). OOA2 has the highest O : C ratio and exhibits elevated mass concentration in the afternoon. Similar diurnal variation of highly oxidized OA factors was commonly observed in the Houston area during previous studies and attributed to the SOA formation by photochemistry and mixing from aloft. Here, using air mass backward trajectories and a 1-D box model, we show the diurnal trend of OOA2 mass concentration is instead driven by changes in air mass arriving at the rural site. The air mass changes are likely caused by the shift between land breezes and sea/bay breezes. Within the same air mass type (e.g., either urban or marine air mass), OOA2 mass concentration is largely independent of wind direction and shows essentially no diurnal variation, suggesting OOA2 is related to aged OA with minimal influence by local emissions. This study helps identify the major sources of OA in the Houston region and highlights the impacts of both atmospheric chemistry and meteorology on aerosol properties in the coastal–rural environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Probabilistic Hazard Assessment for Tornadoes, Straight-Line Wind, and Extreme Precipitation at the Savannah River Site

Recent data sets for three meteorological phenomena with the potential to inflict damage on SRS facilities – tornadoes, straight-line winds, and heavy precipitation – are analyzed using appropriate statistical techniques to estimate the occurrence probabilities for these events in the future. Summaries of the results for DOE-mandated return periods and comparisons to similar calculations performed in 2013 by Werth et al. (W2013) are given. Using tornado statistics for i) the combined states of Georgia and South Carolina, and ii) a 2⁰ square area surrounding SRS, we calculated the probability per year of any location at SRS being struck by a tornado (the ‘strike’ probability) and the probability that any point will experience winds above set thresholds. The strike probability was calculated to be 7.04E-4 (1 chance in 1420) per year and tornadic wind speeds for DOE mandated return periods of 50,000 years (corresponding to wind design category 3 (WDC-3), and 125,000 years (meeting WDC-4) (USDOE, 2016) were estimated to be 132 mph and 147 mph, respectively. By contrast, default tornado wind speeds taken from ANSI/ANS-2.3-2011 are somewhat higher: 161 mph for return periods of 50,000 years and 173 mph every 125,000 years (ANS, 2011). Although the ANS and the SRS evaluation used the same basic model (Ramsdell and Rishel, 2007), the region defined in ANS 2.3 that encompasses the SRS also includes areas of the Great Plains and lower Midwest, regions with much higher occurrence frequencies of strong tornadoes. The SRS straight-line wind values associated with various return periods were calculated by fitting existing wind data to a GEV1 distribution and extrapolating the values for any return period from the tail of that function. For the DOE mandated return periods, we expect straight-line winds of 117 mph every 2500 years (the required WDC-3 standard) and 125 mph every 6250 years (WDC-4) at any point within the SRS. These values are similar to those from the ANS-2.3-2011 report, which has wind speeds of 125mph and 133 mph for return periods of 2500 years and 6250 years, respectively. For extreme precipitation, we compared the fits of two different theoretical extreme-value distributions and applied the one that fit the data best for each of several accumulation periods. The DOE mandated 6-hr accumulated rainfall for return periods of 10,000 years (corresponding to precipitation design category 3 (PDC-3) and 25,000 years (PDC-4) were estimated as 9.1 inches and 10.1 inches, respectively. For the 24-hr rainfall return periods of 10,000 years and 25,000 years, total rainfall estimates were 12.02 inches and 13.17 inches, respectively, higher than comparable values provided in the W2013 report.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Batteries Included: Top 10 Findings from Berkeley Lab Research on the Growth of Hybrid Power Plants in the United States

One of the most important electric power system trends of the 2010s was the rapid deployment of wind turbines and photovoltaic arrays, but a twist for the 2020s may be the rapid deployment of ‘hybrid’ generation resources. Hybrid power plants typically combine solar or wind (or other energy sources) with co-located storage. While hybridization helps to ease the challenge of balancing variable supply and demand, its relative novelty means that research is needed to facilitate integration and promote innovation. Combining the characteristics of multiple energy, storage, and conversion technologies poses complex questions for grid operations and economics. Project developers, system operators, planners, and regulators would benefit from better data, methods, and tools to estimate the costs, values, and system impacts of hybrid projects. This publication showcases some of Berkeley Lab’s robust research program intended to support private- and public-sector decision-making about hybrid plants in the United States. Our short briefing summarizes articles that we published between 2020 and 2022, links to the in-depth reports, and provides contact details for further engagement on the specific research topics: Growth: Developer interest in hybrid power plants is strong and growing Price vs. Value: PV+storage hybrids have low PPA prices and high value in some regions Market Drivers: Solar hybridization is driven by tax credits and other benefits Configuration Choices: Market prices have incentivized shorter duration batteries with PV Capacity Value: The capacity contribution of a hybrid is less than the sum of its parts Ancillary Services: AS markets are a valuable yet fleeting option for hybrids Market Participation: Hybrids can more flexibly engage with electricity markets Operations: The power system value of hybrids depends on how they are operated Distributed Hybrids: Growth of customer-sited PV+storage hybrids offers new opportunities Future Research: Where next? Priority areas for hybrid power research.

25 ENERGY STORAGE↗
DOE OSTI2021

REopt Lite User Manual

REopt Lite evaluates the economic viability of grid-connected solar photovoltaics, wind, combined heat and power, and electric and thermal storage at commercial and small industrial sites. It allows building owners to identify the system sizes and dispatch strategies that minimize the site’s life cycle cost of energy. REopt Lite also estimates the amount of time on-site generation and storage can sustain the site's critical load during a grid outage and allows the user the choice of optimizing for energy resilience. It is primarily used to inform project development decisions and to support research on the factors that drive project feasibility for market development and policy analysis. It is available through a web interface, application programing interface, and open-source code. This user manual provides an overview of the model, including its capabilities and typical applications; inputs and outputs; economic calculations; technology descriptions; and model parameters, variables, and equations. The model is highly flexible and is continually evolving to meet the needs of each analysis. Therefore, this report is not an exhaustive description of all capabilities, but rather a summary of the core components of the model.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Developing a Power Plant Suitability Model for the Energy Zones Mapping Tool

This report provides an example of designing, developing, and running a power plant suitability model in the Energy Zones Mapping Tool (EZMT), a public, web-based mapping tool with a large spatial database focused on energy infrastructure, energy resources, and related siting factors. The example focuses on natural gas combined cycle (NGCC) power plants, which have several unique and interesting characteristics. NGCC plants typically provide peaking power to the electrical grid. Such plants can be started or stopped relatively quickly and are often used to supplement base load plants (such as nuclear or coal) during times of peak electrical consumption or to counterbalance lulls in variable power generation (such as wind or solar). Due to these and other factors, NGCC plants have been projected to increase in number under energy planning studies such as Hadley et al. The scope of the Hadley et. al. study is the Eastern Interconnection (EI), the electrical transmission grid serving much of the United States and Canada east of the Rocky Mountains. Results in the study are organized according to 22 Multi-region National—North American Electricity and Environment Model (NEEM) regions within the EI. NGCC plants usually have lower water requirements than other thermoelectric power plants they may replace; therefore, they are expected to have an interesting role in reducing the overall water requirements of energy generation.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Reconstructing Masses of Merging Neutron Stars from Stellar r -process Abundance Signatures

We report that neutron star mergers (NSMs) are promising astrophysical sites for the rapid neutron-capture ("r") process, but can their integrated yields explain the majority of heavy-element material in the Galaxy? One method to address this question implements a forward approach that propagates NSM rates and yields along with stellar formation rates and compares those results with observed chemical abundances of r-process-rich, metal-poor stars. In this work, we take the inverse approach by utilizing r-process-element abundance ratios of metal-poor stars as input to reconstruct the properties -especially the masses - of their neutron star (NS) binary progenitors. This novel analysis provides an independent avenue for studying the population of the original NS binary systems that merged and produced the r-process material now incorporated in Galactic metal-poor halo stars. We use ratios of elements typically associated with the limited-r-process and the actinide region to those in the lanthanide region (i.e., Zr/Dy and Th/Dy) to probe the NS masses of the progenitor merger. We find that NSMs can account for all r-process material in metal-poor stars that display r-process signatures, while simultaneously reproducing the present-day distribution of double-NS systems. Notably, with our model assumptions and the studied stellar sample, we postulate that the most r-process enhanced stars (the r–II stars) on their own would require progenitor NSMs of asymmetric systems that are distinctly different from present ones in the Galaxy. We also explore variations to the model and find that the predicted degree of asymmetry is most sensitive to the electron fraction of the remnant disk wind.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

How Can Probabilistic Solar Power Forecasts Be Used to Lower Costs and Improve Reliability in Power Spot Markets? A Review and Application to Flexiramp Requirements

Net load uncertainty in electricity spot markets is rapidly growing. There are five general approaches by which system operators and market participants can use probabilistic forecasts of wind, solar, and load to help manage this uncertainty. These include operator situation awareness, resource risk hedging, reserves procurement, definition of contingencies, and explicit stochastic optimization. We review these approaches, and then provide a case study in which a method for using probabilistic solar forecasts to define needs for reserves is developed and evaluated. The case study has three parts. First, we describe building blocks for enhancing the Watt-Sun solar forecasting system to produce probabilistic irradiance and power forecasts. Second, relationships between Watt-Sun forecasts for multiple sites in California and the system's need for flexible ramp capability (flexiramp) are defined by machine learning and statistical methods. Third, the performance of present methods to defining flexiramp requirements, which are not conditioned on weather and renewables forecasts, is compared with that of probabilistic solar forecast-based requirements, using a multi-timescale production costing model with an 1820-bus representation of the WECC power system. Significant potential savings in fuel and flexiramp procurement costs from using solar-informed reserve requirements are found.

14 SOLAR ENERGY↗
DOE OSTI2026

SuperLab 2.0 Showcase: Connecting Five Labs to Tackle Grid Complexity and Unlock Unique Grid Asset Potential

SuperLab 2.0 (5-Lab Demo) is a collaborative, national-scale experiment showcasing the coordination of geographically distributed energy assets in real time. The demonstration integrates 25 physical and digital assets, spanning wind, PV, batteries, electrolyzers, DC fast chargers, microgrid controllers, building automation systems, small modular reactor (SMR), control centers, and gas turbines, across five DOE national laboratories-NLR, INL, NETL, LBNL, and SNL. These assets are unified using Energy Sciences Network (ESnet), a low-latency, high-performance U.S. Department of Energy's (DOE) network, and controlled via a centralized energy controller hosted at NLR's ARIES facility. The demonstration validates the ability to stress-test hybrid energy systems under dynamic scenarios to de-risk advanced control strategies for greater resilience and flexibility. SuperLab 2.0 (5-Lab Demo) showcased a major advancement in federated national laboratory collaboration, enabling real-time, cross-laboratory experimentation to coordinate geographically dispersed distributed energy resources (DERs) using various communication protocols and networks. SuperLab 2.0 (5-Lab Demo) built on previous demonstrations conducted between NLR-PNNL and NLR-INL connecting diverse assets including distant protection devices, a SMR simulator, and a high temperature electrolyzer (HTE). Previous demos were based on a single connection between two labs with minimal coordination challenges. The 5-Lab demo with a centralized controller, distributed testbeds across different geographical locations, and use of protocols-based communication represents a scenario closer to real-world grid operations that coordinate resources across a region to meet system needs. This experiment studied how local DER controllers interact with a centralized energy controller during normal and abnormal events to maintain reliability. The SuperLab team across the five labs implemented a notional power system model equivalent of transmission and distribution lines, represented by the data networks interconnecting the labs. Each lab continuously exchanged local parameters (such as P and Q) from its Hardware-In-Loop (CHIL) and Power Hardware-In-Loop (PHIL) assets through centralized energy controller at NLR, enabling real-time interaction and coordination across sites. By leveraging ESnet as the communication backbone, the team successfully operated the distributed assets as a unified power system, with each bus represented by a different laboratory. This setup mirrors how assets interact in real-world power systems across dispersed locations with various protocols and latencies. At each lab site, assets were operated using their own local controllers which were coordinated through an overarching operation and control layer of centralized energy controller, equivalent to how an energy management system (EMS) orchestrates assets across a regional or national grid. SuperLab's federated connectivity utilized a Digital Real-Time Simulators (DRTS)-type gateway to connect Controller Hardware-In-Loop (CHIL) and PHIL assets between labs. To enable this federated connection through ESnet, a deterministic network was established where latency variations were consistent. This consistency allowed the development of digital filters for the power system assets across CHIL and PHIL interfaces to avoid unstable and unreliable grid conditions. This report provides an overview of the cross-laboratory configuration and offers insights into interconnecting geographically distributed research assets to test them as if they were co-located. This experiment represents a step toward linking nine DOE national laboratories, enabling nation-wide simulations that can address utility-driven challenges with grid resilience, flexibility, and modernization.

24 POWER TRANSMISSION AND DISTRIBUTION↗