Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “disconnection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Fracture Intensity Impacts on Reaction Front Propagation and Mineral Weathering in Three‐Dimensional Fractured Media

Abstract Studying reaction front propagation in heterogeneous natural settings is challenging, but numerical simulations can provide insight into the varying spatial and temporal scales of reaction front propagation. Here, the impact of increasing fracture intensity on mineral dissolution rates, and the extent of reaction front propagation is investigated using reactive transport simulations in upscaled discrete fracture network domains with varied fracture intensity. Domain‐averaged dissolution rates vary less than 0.5 log units regardless of the fracture intensity, but the spatial distribution of reactions is controlled by the location and number of dead‐end fractures and the number of connected flowpaths through the domain. Higher fracture intensities lead to more weathering in the domain because of more available mineral for water‐rock interactions. We find that reaction fronts propagate through the primary flowpaths in the first 10,000 years of the simulation for a 10‐m length domain, then propagate into secondary flowpaths and dead‐end fractures between 10,000 and 100,000 years, and finally into the matrix over timescales of hundreds of thousands of years. The domain‐averaged reaction rates decrease through time corresponding to a transition from dissolution in advection‐dominated, fast‐flowing pathways, to dissolution in transport‐limited zones of disconnected fractures and matrix. Matrix dissolution, or dissolution under transport‐limited conditions, is the dominant process at late times in these simulations. The results of these simulations recreate the observed paradox found in nature where highly fractured hillslopes tend to be more weathered but have slower weathering rates, while hillslopes with fewer fractures, are less weathered but have higher dissolution rates.

58 GEOSCIENCES↗
DOE OSTI2021

Energy efficiency and biological interactions define the core microbiome of deep oligotrophic groundwater

While oligotrophic deep groundwaters host active microbes attuned to the low-end of the bioenergetics spectrum, the ecological constraints on microbial niches in these ecosystems and their consequences for microbiome convergence are unknown. Here, we provide a genome-resolved, integrated omics analysis comparing archaeal and bacterial communities in disconnected fracture fluids of the Fennoscandian Shield in Europe. Leveraging a dataset that combines metagenomes, single cell genomes, and metatranscriptomes, we show that groundwaters flowing in similar lithologies offer fixed niches that are occupied by a common core microbiome. Functional expression analysis highlights that these deep groundwater ecosystems foster diverse, yet cooperative communities adapted to this setting. We suggest that these communities stimulate cooperation by expression of functions related to ecological traits, such as aggregate or biofilm formation, while alleviating the burden on microorganisms producing compounds or functions that provide a collective benefit by facilitating reciprocal promiscuous metabolic partnerships with other members of the community. We hypothesize that an episodic lifestyle enabled by reversible bacteriostatic functions ensures the subsistence of the oligotrophic deep groundwater microbiome.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Dual phase patterning during a congruent grain boundary phase transition in elemental copper

The phase behavior of grain boundaries can have a strong influence on interfacial properties. Little is known about the emergence of grain boundary phases in elemental metal systems and how they transform. Here, we observe the nanoscale patterning of a grain boundary by two alternating grain boundary phases with distinct atomic structures in elemental copper by atomic resolution imaging. The same grain boundary phases are found by computational grain boundary structure search indicating a first-order transformation. Finite temperature atomistic simulations reveal a congruent, diffusionless transition between these phases under ambient pressure. The patterning of the grain boundary at room temperature is dominated by the grain boundary phase junctions separating the phase segments. Our analysis suggests that the reduced mobility of the phase junctions at low temperatures kinetically limits the transformation, but repulsive elastic interactions between them and disconnections could additionally stabilize the pattern formation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Stable water splitting using photoelectrodes with a cryogelated overlayer

Hydrogen production techniques based on solar-water splitting have emerged as carbon-free energy systems. Many researchers have developed highly efficient thin-film photoelectrochemical (PEC) devices made of low-cost and earth-abundant materials. However, solar water splitting systems suffer from short lifetimes due to catalyst instability that is attributed to both chemical dissolution and mechanical stress produced by hydrogen bubbles. A recent study found that the nanoporous hydrogel could prevent the structural degradation of the PEC devices. In this study, we investigate the protection mechanism of the hydrogel-based overlayer by engineering its porous structure using the cryogelation technique. Tests for cryogel overlayers with varied pore structures, such as disconnected micropores, interconnected micropores, and surface macropores, reveal that the hydrogen gas trapped in the cryogel protector reduce shear stress at the catalyst surface by providing bubble nucleation sites. The cryogelated overlayer effectively preserves the uniformly distributed platinum catalyst particles on the device surface for over 200 h. Our finding can help establish semi-permanent photoelectrochemical devices to realize a carbon-free society.

42 ENGINEERING↗
DOE OSTI2025

Industrializable interlayer with catalytic conversion of dead lithium for Ah–level Nickel–rich lithium metal batteries

The growth of lithium (Li) dendrites and the accumulation of dead Li (i.e., Li metal regions which are electronically disconnected from the current collector) significantly undermine the safety and performance of Li metal batteries. This study employs kilogram-scale atomic layer deposition technology to construct zinc oxide with a preferential (002) crystal orientation, which homogeneously forms on commercial carbon nanotube papers. Our approach emphasizes the importance of achieving a moderate Li adsorption energy and low Li migration energy barriers to suppress Li dendrite growth. In this work, we introduce the concept of "catalytic" effect for dead Li reconversion, as validated through time-of-flight secondary ion mass spectrometry, leading to a Li plating/stripping efficiency of 99.89%. The Ah-level Li metal pouch cells with high-nickel positive electrodes achieve a specific energy of 380 Wh kg -1 (based on the mass of the whole pouch cell) and demonstrate stable cycling under demanding conditions. Analysis of the cycled pouch cells confirms the structural integrity and provides insights into the mechanism of the dead Li "catalytic" conversion.

Shen, Huasen [Jianghan University, Wuhan (China)]↗
DOE OSTI2022

Emergence of Fermi arcs due to magnetic splitting in an antiferromagnet

The Fermi surface plays an important role in controlling the electronic, transport and thermodynamic properties of materials. As the Fermi surface consists of closed contours in the momentum space for well-defined energy bands, disconnected sections known as Fermi arcs can be signatures of unusual electronic states, such as a pseudogap. Another way to obtain Fermi arcs is to break either the time-reversal symmetry or the inversion symmetry of a three-dimensional Dirac semimetal, which results in formation of pairs of Weyl nodes that have opposite chirality, and their projections are connected by Fermi arcs at the bulk boundary. Here, we present experimental evidence that pairs of hole- and electron-like Fermi arcs emerge below the Neel temperature (TN) in the antiferromagnetic state of cubic NdBi due to a new magnetic splitting effect. The observed magnetic splitting is unusual, as it creates bands of opposing curvature, which change with temperature and follow the antiferromagnetic order parameter. This is different from previous theoretically considered and experimentally reported cases of magnetic splitting, such as traditional Zeeman and Rashba, in which the curvature of the bands is preserved. Therefore, our findings demonstrate a type of magnetic band splitting in the presence of a long-range antiferromagnetic order that is not readily explained by existing theoretical ideas.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Understanding the hydrological response of a headwater-dominated catchment by analysis of distributed surface–subsurface interactions

Abstract We computationally explore the relationship between surface–subsurface exchange and hydrological response in a headwater-dominated high elevation, mountainous catchment in East River Watershed, Colorado, USA. In order to isolate the effect of surface–subsurface exchange on the hydrological response, we compare three model variations that differ only in soil permeability. Traditional methods of hydrograph analysis that have been developed for headwater catchments may fail to properly characterize catchments, where catchment response is tightly coupled to headwater inflow. Analyzing the spatially distributed hydrological response of such catchments gives additional information on the catchment functioning. Thus, we compute hydrographs, hydrological indices, and spatio-temporal distributions of hydrological variables. The indices and distributions are then linked to the hydrograph at the outlet of the catchment. Our results show that changes in the surface–subsurface exchange fluxes trigger different flow regimes, connectivity dynamics, and runoff generation mechanisms inside the catchment, and hence, affect the distributed hydrological response. Further, changes in surface–subsurface exchange rates lead to a nonlinear change in the degree of connectivity—quantified through the number of disconnected clusters of ponding water—in the catchment. Although the runoff formation in the catchment changes significantly, these changes do not significantly alter the aggregated streamflow hydrograph. This hints at a crucial gap in our ability to infer catchment function from aggregated signatures. We show that while these changes in distributed hydrological response may not always be observable through aggregated hydrological signatures, they can be quantified through the use of indices of connectivity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A framework to evaluate machine learning crystal stability predictions

The rapid adoption of machine learning in various scientific domains calls for the development of best practices and community agreed-upon benchmarking tasks and metrics. We present Matbench Discovery as an example evaluation framework for machine learning energy models, here applied as pre-filters to first-principles computed data in a high-throughput search for stable inorganic crystals. We address the disconnect between (1) thermodynamic stability and formation energy and (2) retrospective and prospective benchmarking for materials discovery. Alongside this paper, we publish a Python package to aid with future model submissions and a growing online leaderboard with adaptive user-defined weighting of various performance metrics allowing researchers to prioritize the metrics they value most. To answer the question of which machine learning methodology performs best at materials discovery, our initial release includes random forests, graph neural networks, one-shot predictors, iterative Bayesian optimizers and universal interatomic potentials. We highlight a misalignment between commonly used regression metrics and more task-relevant classification metrics for materials discovery. Accurate regressors are susceptible to unexpectedly high false-positive rates if those accurate predictions lie close to the decision boundary at 0 eV per atom above the convex hull. The benchmark results demonstrate that universal interatomic potentials have advanced sufficiently to effectively and cheaply pre-screen thermodynamic stable hypothetical materials in future expansions of high-throughput materials databases.

Riebesell, Janosh↗
DOE OSTI2024

Elastic deformation as a tool to investigate watershed storage connectivity

Storage-discharge relationships and dynamic changes in storage connectivity remain key unknowns in understanding and predicting watershed behavior. In this study, we use Global Positioning System measurements of load-induced Earth surface displacement as a proxy for total water storage change in four climatologically diverse mountain watersheds in the western United States. Comparing total water storage estimates with stream-connected storage derived from hydrograph analysis, we find that each of the investigated watersheds exhibits a characteristic seasonal pattern of connection and disconnection between total and stream-connected storage. We investigate how the degree and timing of watershed-scale connectivity is related to the timing of precipitation and seasonal changes in dominant hydrologic processes. Our results show that elastic deformation of the Earth due to water loading is a powerful new tool for elucidating dynamic storage connectivity and watershed discharge response across scales in space and time.

Environmental Sciences & Ecology↗
DOE OSTI2024

Voltage and temperature effects on low cobalt lithium-ion battery cathode degradation

Degradation of low cobalt lithium-ion cathodes was tested using a full factorial combination of upper cut-off voltage (4.0 V and 4.3 V vs. Li/Li + ) and operating temperature (25 °C and 60 °C). Half-cell batteries were analyzed with electrochemical and microstructural characterization methods. Electrochemical performance was assessed with galvanostatic cycling, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) supported by distribution of relaxation times (DRT) analysis. Electrode microstructure was characterized with scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray absorption near edge structure (XANES) imaging. Higher cut-off voltage cycling shows presence of NiO x formation, a low diffusivity rock-salt phase, in both CV and XRD data. XRD patterns confirmed that the rock-salt phase was beginning to form at the low cut-off voltage at high temperature, but in much lower intensity than at the high cut-off voltage. Higher temperature accelerates degradation processes at both voltages. Degradation factors at high temperature include NiO x formation, cathode material dissolution, and electrolyte decomposition. SEM analysis suggests that supporting phases may isolate and disconnect active material particles reducing capacity retention and battery life cycle. DRT analysis and XANES imaging show that both high temperature samples revealed a NiO x phase based on an increased diffusive impedance and a visible shift in the XANES spectra. The low cut-off voltage, high temperature sample showed a split peak and shift to lower energies indicating early formation of the NiO x phase. The diffusive impedance, which hinders intercalation and deintercalation, is driven by the formation of the NiO x phase. While primarily driven by cut-off voltage, elevated temperature also contributes to this degradation mechanism.

electrochemical impedance spectroscopy↗
DOE OSTI2025

Energy supply time in an islanded grid portion re-energized by local renewable sources

When a portion of the low-voltage distribution network, typically a village, is disconnected from the upstream network, due to a fault or maintenance, it can be re-energized temporarily by the distribution system operator. Usually, if closing of a normally open tie-switch connected to a neighboring feeder is not possible, a diesel generator is conveyed to the islanded grid portion and used towards temporary energy supply. This solution though can be costly, environmentally detrimental or n

Marchand, Jane [University Grenoble Alpes]↗
DOE OSTI2024

Modelling and analysis of nuclear reactor system coupled with a liquid metal battery

Traditionally, nuclear power plants in the U.S. provide baseload power to the power grid because they have less flexibility for ramping their output power than natural gas peaking plants. However, achieving climate goals to reduce the consumption of fossil‐based natural gas places pressure on nuclear power plants and other power generators to ramp up their power output to balance grid generation with demand. This paper presents the modelling and performance analysis of a nuclear reactor system (NRS) coupled to a liquid‐metal battery (LMB) to improve its dynamic response and enable its black start capability. The NRS and LMB thermal behaviour are modelled in Dymola, while the electrical dynamics of the LMB and power grid are modelled in RTDS‐RSCAD. Both simulation platforms are coupled and share their thermal and electrical data using a Transmission Control Protocol/Internet Protocol (TCP/IP) communication protocol. The dynamic performance of the NRS‐LMB integration is tested on the IEEE 9 bus, which demonstrates its ability to respond and provide frequency and voltage regulation. The black start capability of the NRS‐LMB is also evaluated by simulating a grid outage and using the LMB to supply the auxiliary loads required to bring the NRS back online as soon as possible. The results show that coupling an NRS to an LMB improves the system dynamic performance and enables it to black start after being disconnected from the grid for several days.

25 ENERGY STORAGE↗
DOE OSTI2023

A reduced-model (nSOLT) simulation of neutral recycling effects on plasma turbulence in the divertor region of MAST-U

The 2D scrape-off-layer turbulence code (nSOLT), which includes 1D kinetic neutral–plasma interactions, is applied to study effects of neutral recycling on plasma turbulence for parameters illustrative of the MAST-U divertor region. Neutral recycling is modeled by injecting a fraction of the parallel plasma flux to the divertor back into the simulation domain as a source of Franck–Condon-distributed neutrals. Stationary sources, concentrated at the magnetic separatrix, model plasma streaming into the divertor region from the upstream scrape-off-layer and sustain plasma turbulence absent neutral recycling. Starting from one such no-neutrals equilibrium, we initiate recycling in a numerical experiment designed to diagnose and identify the effects of various neutral–plasma interactions on the divertor plasma, divertor turbulence, and plasma exhaust. The onset of recycling triggers an initial burst of enhanced cross field plasma transport that is quelled by ionization cooling and charge–exchange (CX) friction, with growing neutral pressure, leading to a quiescent, turbulence-free state. Diagnosis of this transient burst reveals that (1) the sudden increase in plasma density due to ionization dominates the onset of the burst, (2) electron cooling due to ionization increases collisionality and disconnects blob filaments from the sheath, and (3) CX friction drives tripole polarization of a blob that can dominate the curvature-driven dipole polarization, leading to the stagnation of blob propagation and reduced radial turbulent transport. It is shown that CX friction is negligible compared to sheath physics in determining equilibrium mean flow shearing rates, for parameters considered herein (specifically a short connection length to the divertor target), while it can significantly reduce interchange-instability growth rates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Dynamics of rapidly spinning blob-filaments: Fluid theory with a parallel kinetic extension

Blob-filaments (or simply “blobs”) are coherent structures formed by turbulence and sustained by nonlinear processes in the edge and scrape-off layer (SOL) of tokamaks and other magnetically confined plasmas. The dynamics of these blob-filaments, in particular, their radial motion, can influence the scrape-off layer width and plasma interactions with both the divertor target and with the main chamber walls. Motivated by recent results from the XGC1 gyrokinetic simulation code reported on elsewhere [J. Cheng et al., Nucl. Fusion 63, 086015 (2023)], a theory of rapidly spinning blob-filaments has been developed for this work. The theory treats blob-filaments in the closed flux surface region or the region that is disconnected from sheaths in the SOL. It extends previous work by treating blob spin, arising from partially or fully adiabatic electrons, as the leading-order effect and retaining inertial (ion charge polarization) physics in next order. Spin helps to maintain blob coherency and affects the blob's propagation speed. Dipole charge polarization, treated perturbatively, gives rise to blob-filaments with relatively slow radial velocity, comparable to that observed in the simulations. The theory also treats the interaction of rapidly spinning blob-filaments with a zonal flow layer. It is shown analytically that the flow layer can act like a transport barrier for these structures. Finally, parallel electron kinetic effects are incorporated into the theory. Various asymptotic parameter regimes are discussed, and asymptotic expressions for the radial and poloidal motion of the blob-filaments are obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Effect of outer-cylinder rotation on the radially heated Taylor–Couette flow

A Taylor–Couette setup with radial heating is considered where a Boussinesq fluid is sheared in the annular region between two concentric, independently rotating cylinders maintained at different temperatures. Linear stability analysis is performed to determine the Taylor number for the onset of instability. Two radius ratios corresponding to wide and thin gaps with several rotation rate ratios are considered. The rotation of the outer cylinder is found to have a general stabilizing effect on the stability threshold as compared to pure inner-cylinder rotation, with a few exceptions. The radial heating sets up an axial flow which breaks the reflection symmetry of isothermal Taylor–Couette flow in the axial coordinate. This symmetry breaking separates linear stability thresholds, and we find the fastest growing modes with both positive and negative azimuthal numbers for different parameters. Another important finding of the current study is the discovery of unstable modes in the Rayleigh-stable regime. Furthermore, closed disconnected neutral curves (CDNCs) are observed for both wide and thin gaps which can separate from or merge into open neutral–stability curves. Alternatively, CDNCs can also morph into open neutral stability curves as the rotation rate ratio is changed. CDNCs are observed to be sensitive to changes in control parameters, and their appearance/disappearance is shown to induce discontinuous jumps in the critical Taylor number. Finally, for both wide and thin gaps, the fastest-growing modes found in the pure corotation case are shown to have their origins in the instability islands at smaller values of rotation rate ratios.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Quantifying the dislocation content of atomically resolved grain boundary line defects using the Nye tensor

The Nye tensor, which quantifies the density of Burgers vector for a given dislocation line direction, can be effectively used to characterize dislocation content in bulk crystals from atomic-resolution transmission electron microscopy images. The Nye tensor can be calculated from these images, in part because the reference state is simply defined by the lattice of the perfect crystal. The application of the Nye tensor to interfacial line defects, for which the natural reference state is the dichromatic pattern of the two grains in their reference orientation, poses additional challenges. In this work, we present a method that employs the Nye tensor to characterize the edge dislocation content of line defects at grain boundaries from atomic-resolution images. This approach enables us to rapidly characterize all edge dislocation content along a grain boundary. Additionally, the Nye tensor provides information about line defect core structure. Finally, we demonstrate this method on two exemplar defects: a twin boundary disconnection and a facet junction in face-centered cubic Au.

Crystallographic defects↗
DOE OSTI2025

Circuit complexity and functionality: A statistical thermodynamics perspective

Circuit complexity, defined as the minimum circuit size required for implementing a particular Boolean computation, is a foundational concept in computer science. Determining circuit complexity is believed to be a hard computational problem. Recently, in the context of black holes, circuit complexity has been promoted to a physical property, wherein the growth of complexity is reflected in the time evolution of the Einstein-Rosen bridge (“wormhole”) connecting the two sides of an anti-de Sitter “eternal” black hole. Here, we are motivated by an independent set of considerations and explore links between complexity and thermodynamics for functionally equivalent circuits, making the physics-inspired approach relevant to real computational problems, for which functionality is the key element of interest. In particular, our thermodynamic framework provides an alternative perspective on the obfuscation of programs of arbitrary length—an important problem in cryptography—as thermalization through recursive mixing of neighboring sections of a circuit, which can be viewed as the mixing of two containers with “gases of gates.” This recursive process equilibrates the average complexity and leads to the saturation of the circuit entropy, while preserving functionality of the overall circuit. The thermodynamic arguments hinge on ergodicity in the space of circuits which we conjecture is limited to disconnected ergodic sectors due to fragmentation. The notion of fragmentation has important implications for the problem of circuit obfuscation as it implies that there are circuits of same size and functionality that cannot be connected via a polynomial number of local moves. Furthermore, we argue that fragmentation is unavoidable unless the complexity classes NP and coNP coincide, a statement that implies the collapse of the polynomial hierarchy of computational complexity theory to its first level.

Science & Technology - Other Topics↗
DOE OSTI2025

Onset of cavitation and vapor bubble development over hydrophilic and hydrophobic surfaces

Cavitation, the formation of vapor bubbles as the liquid pressure is reduced below the saturated vapor pressure, often requires a substantial negative relative pressure in a pure liquid. Classical nucleation theory (CNT) provides an estimate for the rate of cavitation but there is often a disconnect between the predictions at the molecular scale compared to observations at the macroscale. We report on mesoscale simulations of cavitation based on many-body dissipative particle dynamics (mDPD), a coarse-grained molecular dynamics (MD), which bridges the two scales. A liquid layer is confined between smooth planar walls at a constant temperature, while the pressure is reduced slowly by expanding the wall-bounded domain. The wetting properties of the liquid are determined by the parameters of the interaction potentials. With hydrophilic walls, homogeneous nucleation is observed in the liquid bulk. As a bubble forms and grows, it creates a strong pressure pulse and oscillations that cause other bubbles that may have formed slightly later to collapse. For a nearly neutral wall with a contact angle close to 90 ° , heterogeneous nucleation occurs at the walls at a smaller negative pressure and generates weaker pressure oscillations. With hydrophobic walls or seed particles, heterogeneous nucleation readily occurs, where fluctuations and the merger of transient surface bubbles are significant.

Science & Technology - Other Topics↗