Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difficult”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Studies of modal identification performance using hybrid data

Modal identification accuracy can be affected significantly in practice by high modal density and nonlinearities. It may be difficult to determine the true number of modes, and many of the identified mode shapes may be questionable. Results can vary considerably using different analysis techniques. This paper introduces a new method for studying modal identification performance under such circumstances. A difficult set of test data from an erectable truss structure was modified numerically by adding two artificial modes with known parameters. These 'hybrid data' were then analyzed with the Polyreference technique and the Eigensystem Realization Algorithm (ERA). Identification performance is studied by comparing the identified modal parameters for the artificial modes with their known values.

Pappa, Richard S.↗
NASA NTRS1987

Statistical mechanics and invariant perception

The problem of discrimination among ensembles of images generated by distortions of a prototype and the addition of noise is considered. As the noise level is increased, the discrimination task becomes qualitatively more difficult in that optimal discrimination requires the computation of increasingly longer-ranged correlations, or the solution of increasingly difficult optimization problems. These results suggest the use of such image ensembles in probing the computational abilities of the human visual system, and possible theoretical implications of such experiments are discussed.

Bialek, William↗
NASA NTRS1987

Optimal placement of excitations and sensors for verification of large dynamical systems

The computationally difficult problem of the optimal placement of excitations and sensors to maximize the observed measurements is studied within the framework of combinatorial optimization, and is solved numerically using a variation of the simulated annealing heuristic algorithm. Results of numerical experiments including a square plate and a 960 degrees-of-freedom Control of Flexible Structure (COFS) truss structure, are presented. Though the algorithm produces suboptimal solutions, its generality and simplicity allow the treatment of complex dynamical systems which would otherwise be difficult to handle.

Salama, M.↗
NASA NTRS1986

Models of the plasmaspheric thermal plasma distribution

Current understanding of the thermal plasma in the atmosphere and its coupling to the ionosphere is reviewed. Existing models appear adequate to explain the gross behavior of the cold thermal plasma, but there remain some vexing problems. Notably, (1) why does the density in flux tubes appear to saturate at lower values than are predicted theoretically, (2) what causes the sunset peak in measured Te, and (3) why does the equatorial plasmapause signature differ in latitude from the ionosphere signatures. The more difficult problem of what happens during the early stages of refilling after a magnetic storm, when the high altitude plasma is likely to be supersonic and collisionless, has received much attention, but the results are not definite. A number of papers have dealt with the interaction of supersonic counterstreaming fluxes and there are now models that can handle the transition from supersonic to subsonic flows although the transition from a collisionless to a collision-dominated plasma remains difficult to deal with.

Richards, P. G.↗
NASA NTRS1988

Large-scale wind turbine structures

The purpose of this presentation is to show how structural technology was applied in the design of modern wind turbines, which were recently brought to an advanced stage of development as sources of renewable power. Wind turbine structures present many difficult problems because they are relatively slender and flexible; subject to vibration and aeroelastic instabilities; acted upon by loads which are often nondeterministic; operated continuously with little maintenance in all weather; and dominated by life-cycle cost considerations. Progress in horizontal-axis wind turbines (HAWT) development was paced by progress in the understanding of structural loads, modeling of structural dynamic response, and designing of innovative structural response. During the past 15 years a series of large HAWTs was developed. This has culminated in the recent completion of the world's largest operating wind turbine, the 3.2 MW Mod-5B power plane installed on the island of Oahu, Hawaii. Some of the applications of structures technology to wind turbine will be illustrated by referring to the Mod-5B design. First, a video overview will be presented to provide familiarization with the Mod-5B project and the important components of the wind turbine system. Next, the structural requirements for large-scale wind turbines will be discussed, emphasizing the difficult fatigue-life requirements. Finally, the procedures used to design the structure will be presented, including the use of the fracture mechanics approach for determining allowable fatigue stresses.

Spera, David A.↗
NASA NTRS1988

Non-atmospheric noble gases from CO(sub 2) well ga

In recent years a number of studies of both terrestrial and extraterrestrial material has allowed the piecing together of a picture of events occurring in the early solar system (4.5 Gyr ago), including the formation of the earth. However, before this picture can be completed with an appropriate amount of detail it will be necessary to make further advances. One of the areas where knowledge is lacking is the chemical and isotopic composition of the earth as a whole. The lack of knowledge has less to do with the capabilities of modern techniques than with the availability of samples to study. About 99.6 percent of the earth's mass is contained in the mantle and core, leaving less that 1 percent in the crust and atmosphere. Although the crust is derived from the mantle it has undergone extensive changes and it is therefore difficult (although not impossible) to use crustal material to study events occurring 4.5 Gyr ago. More information about the early earth could be obtained from studies of the mantle but it is difficult to obtain mantle material, because the mean thickness of the crust is 17 km, much greater than even the deepest mines or drill shafts. The two types of available mantle samples are discussed.

Caffee, M. W.↗
NASA NTRS1987

Combustion noise from gas turbine aircraft engines measurement of far-field levels

Combustion noise can be a significant contributor to total aircraft noise. Measurement of combustion noise is made difficult by the fact that both jet noise and combustion noise exhibit broadband spectra and peak in the same frequency range. Since in-flight reduction of jet noise is greater than that of combustion noise, the latter can be a major contributor to the in-flight noise of an aircraft but will be less evident, and more difficult to measure, under static conditions. Several methods for measuring the far-field combustion noise of aircraft engines are discussed in this paper. These methods make it possible to measure combustion noise levels even in situations where other noise sources, such as jet noise, dominate. Measured far-field combustion noise levels for several turbofan engines are presented. These levels were obtained using a method referred to as three-signal coherence, requiring that fluctuating pressures be measured at two locations within the engine core in addition to the far-field noise measurement. Cross-spectra are used to separate the far-field combustion noise from far-field noise due to other sources. Spectra and directivities are presented. Comparisons with existing combustion noise predictions are made.

Krejsa, Eugene A.↗
NASA NTRS1988

The spectral appearance of comets from 5 to 20 micrometers: A survey of the data

Based on the concept of comets as being conglomerates of rocks and ices, it is expected that they reflect these components in their emission spectra. Silicate materials (rocks) are common in many astronomical environments and show prominent features at about 10 and 18 micrometers. Carbon should be abundant, but is much more difficult to detect spectroscopically since it has no strong features (except for the hydrogenated form). Ices are present in comets, but they are difficult to detect since they are volatile enough to dissipate when the comet is bright enough to be easily observed in the IR, with present equipment. There are other materials present in comets, but the ones listed above should be the most common and thus dominate the thermal IR spectrum. Most of the IR observations made on comets between 5 and 20 micrometers are summarized. They fall into three broad categories: (1) filter photometry; (2) circular variable filter wheel spectroscopy; and (3) spectra obtained with multidetector grating spectrometers.

Bregman, Jesse D.↗
NASA NTRS1988

Universal limiter for transient interpolation modeling of the advective transport equations: The ULTIMATE conservative difference scheme

A fresh approach is taken to the embarrassingly difficult problem of adequately modeling simple pure advection. An explicit conservative control-volume formation makes use of a universal limiter for transient interpolation modeling of the advective transport equations. This ULTIMATE conservative difference scheme is applied to unsteady, one-dimensional scalar pure advection at constant velocity, using three critical test profiles: an isolated sine-squared wave, a discontinuous step, and a semi-ellipse. The goal, of course, is to devise a single robust scheme which achieves sharp monotonic resolution of the step without corrupting the other profiles. The semi-ellipse is particularly challenging because of its combination of sudden and gradual changes in gradient. The ULTIMATE strategy can be applied to explicit conservation schemes of any order of accuracy. Second-order schemes are unsatisfactory, showing steepening and clipping typical of currently popular so-called high resolution shock-capturing of TVD schemes. The ULTIMATE third-order upwind scheme is highly satisfactory for most flows of practical importance. Higher order methods give predictably better step resolution, although even-order schemes generate a (monotonic) waviness in the difficult semi-ellipse simulation. Little is to be gained above ULTIMATE fifth-order upwinding which gives results close to the ultimate for which one might hope.

Leonard, B. P.↗
NASA NTRS1987

Dynamic crystallization experiments on chondrule melts in reduced gravity

Chondrules crystallized during the earliest formational history of the solar system; and, if crystal settling and flotation are indicators of crystallization in the presence of gravity, they formed without the influence of gravity. In fact, attempts to duplicate the crystallization history of chondrules in the laboratory have met with limited success, because of the difficulty of comparing objects formed under the influence of gravity with objects that did not. These comparisons are difficult because there are several recognized features introduced by the presence of gravity and no doubt some which are not yet recognized. As a result there are several microscale and macroscale aspects of chondrule petrology which are difficult to understand quantitatively. Most of the features relate to the settling or flotation of early formed crystals. The proposed experiments are briefly described.

Lofgren, Gary↗
NASA NTRS1988

Mars sampling strategy and aeolian processes

It is critical that the geological context of planetary samples (both in situ analyses and return samples) be well known and documented. Apollo experience showed that this goal is often difficult to achieve even for a planet on which surficial processes are relatively restricted. On Mars, the variety of present and past surface processes is much greater than on the Moon and establishing the geological context of samples will be much more difficult. In addition to impact hardening, Mars has been modified by running water, periglacial activity, wind, and other processes, all of which have the potential for profoundly affecting the geological integrity of potential samples. Aeolian, or wind, processes are ubiquitous on Mars. In the absence of liquid water on the surface, aeolian activity dominates the present surface as documented by frequent dust storms (both local and global), landforms such as dunes, and variable features, i.e., albedo patterns which change their size, shape, and position with time in response to the wind.

Greeley, Ronald↗
NASA NTRS1989

Efficient grid generation

Because the governing equations in fluid dynamics contain partial differentials and are too difficult in most cases to solve analytically, these differentials are generally replaced by finite difference terms. These terms contain terms in the solution at nearby states. This procedure discretizes the field into a finite number of states. These states, when plotted, form a grid, or mesh, of points. It is at these states, or field points, that the solution is found. The optimum choice of states, the x, y, z coordinate values, minimizes error and computational time. But the process of finding these states is made more difficult by complex boundaries, and by the need to control step size differences between the states, that is, the need to control the spacing of field points. One solution technique uses a different set of state variables, which define a different coordinate system, to generate the grid more easily. A new method, developed by Dr. Joseph Steger, combines elliptic and hyperbolic partial differential equations into a mapping function between the physical and computational coordinate systems. This system of equations offers more control than either equation provides alone. The Steger algorithm was modified in order to allow bodies with stronger concavities to be used, offering the possibility of generating a single grid about multiple bodies. Work was also done on identifying areas where grid breakdown occurs.

Seki, Rycichi↗
NASA NTRS1988

Primitive material surviving in chondrites - Matrix

A logical place to search for surviving pristine nebular material is in the fine-grained matrices of ordinary and carbonaceous chondrites of petrographic type 3. Unfortunately, many of these chondrites have experienced brecciation, thermal metamorphism, and aqueous alteration, so that interpreting individual features in terms of specific nebular conditions and/or processes is difficult. It follows that the origin and evolutionary history of such matrix phases are controversial, and a consensus is difficult to define. In this chapter, therefore, after summarizing the salient mineralogical, petrographic, chemical, and isotopic features of matrix in apparently primitive chondrites, an attempt is made to provide an overview both of areas of agreement and of topics that are currently in dispute.

Scott, E. R. D.↗
NASA NTRS1990

The Integrated Airframe/Propulsion Control System Architecture program (IAPSA)

The Integrated Airframe/Propulsion Control System Architecture program (IAPSA) is a two-phase program which was initiated by NASA in the early 80s. The first phase, IAPSA 1, studied different architectural approaches to the problem of integrating engine control systems with airframe control systems in an advanced tactical fighter. One of the conclusions of IAPSA 1 was that the technology to construct a suitable system was available, yet the ability to create these complex computer architectures has outpaced the ability to analyze the resulting system's performance. With this in mind, the second phase of IAPSA approached the same problem with the added constraint that the system be designed for validation. The intent of the design for validation requirement is that validation requirements should be shown to be achievable early in the design process. IAPSA 2 has demonstrated that despite diligent efforts, integrated systems can retain characteristics which are difficult to model and, therefore, difficult to validate.

Daniel L Palumbo↗
NASA NTRS1991

The effect of process conditions on the performance of epitaxial InP solar cells

Indium phosphide solar cells have a higher resistance to electron irradiation than Si or GaAs cells of comparable junction depth. As a result, there is much interest in the use of this material for space applications. Cells of this material were made in bulk InP by a number of techniques, including ion implantation, direct diffusion in sealed ampoules, and by open tube diffusion. However, it is generally considered that the epitaxial approach will be superior to all of these techniques. The epitaxy of InP is considerably more difficult than that of gallium arsenide, for a number of reasons. Perhaps the most important is the fact that the native oxides of Indium are extremely difficult to remove, as compared to that of Gallium. In addition, thermal treatments for the desorption of these oxides often result in the formation of phosphorus vacancies and free indium on the surface. Thus, inadequate sample preparation before epitaxy, poor reactor cleaning procedures, or poor transition procedures between the growth of successive layers, all give rise to trap phenomena and to high interface recombination velocities. Moreover, the lifetime of the grown material is dominated by the occurrence of native defects, so that it is a strong function of growth parameters. These problems are of special interest to the fabrication of solar cells, where long life-time, combined with the absence of traps, is highly desirable. A study of this problem is described using a non-invasive diagnostic technique which was developed.

Borrego, J. M.↗
NASA NTRS1990

An endorsement-based approach to student modeling for planner-controlled intelligent tutoring systems

An approach is described to student modeling for intelligent tutoring systems based on an explicit representation of the tutor's beliefs about the student and the arguments for and against those beliefs (called endorsements). A lexicographic comparison of arguments, sorted according to evidence reliability, provides a principled means of determining those beliefs that are considered true, false, or uncertain. Each of these beliefs is ultimately justified by underlying assessment data. The endorsement-based approach to student modeling is particularly appropriate for tutors controlled by instructional planners. These tutors place greater demands on a student model than opportunistic tutors. Numerical calculi approaches are less well-suited because it is difficult to correctly assign numbers for evidence reliability and rule plausibility. It may also be difficult to interpret final results and provide suitable combining functions. When numeric measures of uncertainty are used, arbitrary numeric thresholds are often required for planning decisions. Such an approach is inappropriate when robust context-sensitive planning decisions must be made. A TMS-based implementation of the endorsement-based approach to student modeling is presented, this approach is compared to alternatives, and a project history is provided describing the evolution of this approach.

Murray, William R.↗
NASA NTRS1991

Saltation threshold detection in a wind tunnel by the measurement of the net electrostatic charge

The Mars surface wind tunnel (MARSWIT) is an open circuit wind tunnel used for aeolian studies and is located inside a large vacuum chamber allowing testing at Martian surface atmospheric pressure. Since direct access is not available to the tunnel during operation at low pressure, a remote method of saltation detection is needed. The bed is observed by means of closed circuit video, but it is often difficult to determine the initiation of threshold. The measurement by means of an electrometer of the net electric charge produced by the saltating particles has provided a reliable means of saltation threshold detection. Saltating particles become charged several ways, both in wind tunnels and in a natural environment. The most significant of these methods are tribo-charging and contact charging, which always occur. Fracture charging may also occur under the high velocities associated with particle transport on Mars or under simulated Martian conditions. Detection in MARSWIT is achieved by allowing the saltating particles to impinge on a planar conducting surface normal to the flow that is connected to ground through a Keithly electrometer. The signal from the electrometer is connected to a strip chart recorder along with the analog signal from the pitot tube transducer that is used to determine the wind velocity in the tunnel. Thus, a record of wind velocity and the initiation of particle saltation is conveniently displayed together. While both positive and negative charges are produced during saltation, this method measures only the net charge; thus the charge may be either positive or negative depending upon the particles being tested, the size and size distribution of the test material, and the wind velocity. This has proven to be a very trustworthy and sensitive method of saltation threshold detection, being especially useful with the smaller sized particles which are the most difficult to observe visually.

Leach, Rodman N.↗
NASA NTRS1990

Global convergence of inexact Newton methods for transonic flow

In computational fluid dynamics, nonlinear differential equations are essential to represent important effects such as shock waves in transonic flow. Discretized versions of these nonlinear equations are solved using iterative methods. In this paper an inexact Newton method using the GMRES algorithm of Saad and Schultz is examined in the context of the full potential equation of aerodynamics. In this setting, reliable and efficient convergence of Newton methods is difficult to achieve. A poor initial solution guess often leads to divergence or very slow convergence. This paper examines several possible solutions to these problems, including a standard local damping strategy for Newton's method and two continuation methods, one of which utilizes interpolation from a coarse grid solution to obtain the initial guess on a finer grid. It is shown that the continuation methods can be used to augment the local damping strategy to achieve convergence for difficult transonic flow problems. These include simple wings with shock waves as well as problems involving engine power effects. These latter cases are modeled using the assumption that each exhaust plume is isentropic but has a different total pressure and/or temperature than the freestream.

Young, David P.↗