Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Microstructure, hardness and cavitation erosion resistance of different cold spray coatings on stainless steel 316 for hydropower applications

There is an urgent need for repair of hydropower components that have undergone damage due to cavitation. Conventional repair methods involve melting of materials and can deteriorate material properties and cause distortion. This study investigated the relevant properties of different materials using solid phase processing—cold spray technology. Stainless steel (SS) 316, Inconel 625 and CrC-NiCr materials were cold spray deposited onto base metal SS 316, respectively. Cold spray achieved dense uniform deposits with low level porosity, and intimate contact between the deposit and the base metal was observed. Severe plastic deformation imparted during the cold spray process resulted in significant grain size refinement, nanostructured regions were observed in the deposits across the interfacial area. Cold sprayed deposits exhibited elevated hardness in contrast to that of the base metal SS 316. The cavitation erosion resistance of the deposits was evaluated with a cavitation erosion jet adhering to ASTM G134. Both SS 316 and Inconel 625 achieved better cavitation erosion resistance when compared to that of the SS 316 base metal, with the former exhibiting close to a 4 times improvement.

Jiang, Xiujuan↗

MWCNTs of different physicochemical properties cause similar inflammatory responses, but differences in transcriptional and histological markers of fibrosis in mouse lungs

Multi-walled carbon nanotubes (MWCNTs) are an inhomogeneous group of nanomaterials that vary in lengths, shapes and types of metal contamination, which makes hazard evaluation difficult. Here we present a toxicogenomic analysis of female C57BL/6 mouse lungs following a single intratracheal instillation of 0, 18, 54 or 162 μg/mouse of a small, curled (CNT{sub Small}, 0.8 ± 0.1 μm in length) or large, thick MWCNT (CNT{sub Large}, 4 ± 0.4 μm in length). The two MWCNTs were extensively characterized by SEM and TEM imaging, thermogravimetric analysis, and Brunauer–Emmett–Teller surface area analysis. Lung tissues were harvested 24 h, 3 days and 28 days post-exposure. DNA microarrays were used to analyze gene expression, in parallel with analysis of bronchoalveolar lavage fluid, lung histology, DNA damage (comet assay) and the presence of reactive oxygen species (dichlorodihydrofluorescein assay), to profile and characterize related pulmonary endpoints. Overall changes in global transcription following exposure to CNT{sub Small} or CNT{sub Large} were similar. Both MWCNTs elicited strong acute phase and inflammatory responses that peaked at day 3, persisted up to 28 days, and were characterized by increased cellular influx in bronchoalveolar lavage fluid, interstitial pneumonia and gene expression changes. However, CNT{sub Large} elicited an earlier onset of inflammation and DNA damage, and induced more fibrosis and a unique fibrotic gene expression signature at day 28, compared to CNT{sub Small}. The results indicate that the extent of change at the molecular level during early response phases following an acute exposure is greater in mice exposed to CNT{sub Large}, which may eventually lead to the different responses observed at day 28. - Highlights: • We evaluate the toxicogenomic response in mice following MWCNT instillation. • Two MWCNTs of different properties were examined and thoroughly characterized. • MWCNT exposure leads to increased pulmonary inflammation and acute phase response. • The thick and straight MWCNT induced transcriptional and histological pulmonary fibrotic changes. • This was not observed following exposure to the thinner and curled MWCNT.

60 APPLIED LIFE SCIENCES↗

Covalency of Trivalent Actinide Ions with Different Donor Ligands: Do Density Functional and Multiconfigurational Wavefunction Calculations Corroborate the Observed “Breaks”?

A comprehensive ab initio study of periodic actinide–ligand bonding trends for trivalent actinides is performed. Relativistic density functional theory (DFT) and complete active-space (CAS) self-consistent field wavefunction calculations are used to dissect the chemical bonding in the [AnCl 6 ] 3– , [An(CN) 6 ] 3– , [An(NCS) 6 ] 3– , [An(S 2 PMe 2 ) 3 ], [An(DPA) 3 ] 3– , and [An(HOPO)] – series of actinide (An = U–Es) complexes. Except for some differences for the early actinide complexes with DPA, bond orders and excess 5f-shell populations from donation bonding show qualitatively similar trends in 5f n active-space CAS vs DFT calculations. The influence of spin–orbit coupling on donation bonding is small for the tested systems. Along the actinide series, chemically soft vs chemically harder ligands exhibit clear differences in bonding trends. There are pronounced changes in the 5f populations when moving from Pu to Am or Cm, which correlate with previously noted “breaks” in chemical trends. As a result, bonding involving 5f becomes very weak beyond Cm/Bk. We propose that Cm(III) is a borderline case among the trivalent actinides that can be meaningfully considered to be involved in ground-state 5f covalent bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Screening Hofmann Compounds as CO 2 Sorbents: Nontraditional Synthetic Route to Over 40 Different Pore-Functionalized and Flexible Pillared Cyanonickelates

A simple reaction scheme based on the heterogeneous intercalation of pillaring ligands (HIPLs) provides a convenient method for systematically tuning pore size, pore functionality, and network flexibility in an extended series of pillared cyanonickelates (PICNICs), commonly referred to as Hofmann compounds. The versatility of the approach is demonstrated through the preparation of over 40 different PICNICs containing pillar ligands ranging from ~4 to ~15 Å in length and modified with a wide range of functional groups, including fluoro, aldehyde, alkylamine, alkyl, aryl, trifluoromethyl, ester, nitro, ether, and nonmetalated 4,4'-bipyrimidine. The HIPL method involves reaction of a suspension of preformed polymeric sheets of powdered anhydrous nickel cyanide with an appropriate pillar ligand in refluxing organic solvent, resulting in the conversion of the planar [Ni{sub 2}(CN){sub 4}]{sub n} networks into polycrystalline three-dimensional porous frameworks containing the organic pillar ligand. Preliminary investigations indicate that the HIPL reaction is also amenable to forming Co(L)Ni(CN){sub 4}, Fe(L)Ni(CN){sub 4}, and Fe(L)Pd(CN){sub 4} networks. The materials show variable adsorption behavior for CO{sub 2} depending on the pillar length and pillar functionalization. Several compounds show structurally flexible behavior during the adsorption and desorption of CO{sub 2}. Interestingly, the newly discovered flexible compounds include two flexible Fe(L)Ni(CN){sub 4} derivatives that are structurally related to previously reported porous spin-crossover compounds. The preparations of 20 pillar ligands based on ring-functionalized 4,4'-dipyridyls, 1,4-bis(4- pyridyl)benzenes, and N-(4-pyridyl)isonicotinamides are also described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Antarctic Cloud Macrophysical, Thermodynamic Phase, and Atmospheric Inversion Coupling Properties at McMurdo Station—Part II: Radiative Impact During Different Synoptic Regimes

Different cloud types are generated over Antarctica as a result of various synoptic conditions. The cloud characteristics affect their impact on the surface energy budget. In this study, the dominating synoptic regimes over Antarctica (centered on the Ross Ice Shelf) are classified using self-organizing map (SOM) analysis, applied over long-term ERA-Interim 700 hPa geopotential height data. The corresponding cloud properties over McMurdo Station (measured as part of the AWARE campaign) are described and discussed with respect to the synoptic settings and sea-ice extent conditions. Cloud radiative forcing calculations are performed as well, and a particular focus is given to the net longwave “radiatively cloudy/opaque” (RO) regime. These results are compared with measurements performed at the West Antarctic Ice Sheet (WAIS) Divide to examine their variability and applicability to other Antarctic locations. It is found that the McMurdo cloud properties are strongly affected by the regional mesoscale cyclonic activity, which counterweights the larger-scale synoptic regime influence, while the WAIS clouds are more susceptible to the varying synoptic settings. In addition, it is suggested that the positive trend in the (frequent) cyclonic activity near the Antarctic coastal regions makes ice-clouds an increasing prominent contributor for the RO cases, especially during freeze-up and maximum sea-ice conditions.

antarctic clouds↗

Stronger phonon scattering by larger differences in atomic mass and size in p-type half-Heuslers Hf 1-x Ti x CoSb 0.8 Sn 0.2

We report that high lattice thermal conductivity has been the bottleneck for further improvement of the thermoelectric figure-of-merit (ZT) of half-Heuslers (HHs) Hf 1-x Zr x CoSb 0.8 Sn 0.2 . Theoretically, the lattice thermal conductivity can be reduced by exploring larger differences in the atomic mass and size in the crystal structure, leading to higher ZT. In this paper, we experimentally demonstrated that a lower thermal conductivity in p-type half-Heuslers can be achieved when Ti is used to replace Zr, i.e., Hf 1-x Ti x CoSb 0.8 Sn 0.2 , due to larger differences in the atomic mass and size between Hf and Ti compared with Hf and Zr. Finally, the highest ZT peak, ~1.0 at 800 °C, in the Hf 1-x Ti x CoSb 0.8 Sn 0.2 (x = 0.1, 0.2, 0.3, and 0.5) system was achieved using Hf 0.8 Ti 0.2 CoSb 0.8 Sn 0.2 , which makes this material useful in power generation applications.

36 MATERIALS SCIENCE↗

Characterization of two different orientations of epitaxial niobium thin films grown on MgO(001) surfaces

Epitaxial Nb thin films deposited onto the same crystalline insulating surface can evolve in very different fashions depending on specific deposition conditions, thereby affecting their microstructure, surface morphology and superconducting properties. Here, we examine and compare the microstructure and ensuing surface morphology from two distinct Nb/MgO series each with its own epitaxial registry—namely Nb(001)/MgO(001) and Nb(110)/MgO(001)—leading to distinct surface anisotropy and we closely examine the dynamical scaling of the surface features during growth. We compare our findings with those in other metal/MgO epitaxial systems and for the first time, general scaling formalism is applied to analyze anisotropic surfaces exhibiting biaxial symmetry. Further, Power Spectral Density is applied to the specific problem of thin film growth and surface evolution to qualify the set of deposition conditions leading to smoother surfaces. We find good correlation between the surface morphology and microstructure of the various Nb films with superconducting properties such as their residual resistance ratio and lower critical field.

36 MATERIALS SCIENCE↗

Analysis of diffractive features in elastic scattering of {sup 7}Li by different target nuclei at different energies

The diffractive features of angular distribution have been investigated by analyzing the experimental data for a set of elastic scattering processes of {sup 7}Li by different target nuclei at different laboratory energies. Both Frahn-Venter and McIntyre models are used to analyze experimental data of angular distribution for elastic scattering processes. The theoretical models can reasonably reproduce the general pattern of the data. Some geometrical parameters for colliding nuclei have been obtained from the elastic scattering processes. It is found that interpretation of the diffractive features of the data is model-independent. The values of extracted parameters, from adopted models, are found comparable to each other and to those of others. The total reaction cross section is correlated to the incident laboratory energy for each scattering and values of total reaction cross section are found comparable with those of others.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

In-situ study of crystallization kinetics in ternary bulk metallic glass alloys with different glass forming abilities

In-situ transmission electron microcopy and time-resolved neutron diffraction were used to study crystallization kinetics of two ternary bulk metallic glasses during isothermal annealing in the supercooled liquid region. It is found that the crystallization of Zr 56 Cu 36 Al 8 , an average glass former, follows continuous nucleation and growth, while that of Zr 46 Cu 46 Al 8 , a better glass former, is characterized by site-saturated nucleation, followed by slow growth. Possible mechanisms for the observed differences and the relationship to the glass forming ability are discussed.

36 MATERIALS SCIENCE↗

Carrier lifetimes and interface recombination velocities in CdTe/Mg{sub x}Cd{sub 1−x}Te double heterostructures with different Mg compositions grown by molecular beam epitaxy

The interface recombination velocities of CdTe/Mg{sub x}Cd{sub 1−x}Te double heterostructure (DH) samples with different CdTe layer thicknesses and Mg compositions are studied using time-resolved photoluminescence measurements. A lowest interface recombination velocity of 30 ± 10 cm/s has been measured for the CdTe/Mg{sub 0.46}Cd{sub 0.54}Te interface, and a longest carrier lifetime of 0.83 μs has been observed for the studied DHs. These values are very close to the best reported numbers for GaAs/AlGaAs DHs. The impact of carrier escape through thermionic emission over the MgCdTe barrier on the recombination process in the DHs is also studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stress transfer during different deformation stages in a nano-precipitate-strengthened Ni-Ti shape memory alloy

Understanding the role of fine coherent precipitates in the micromechanical behavior of precipitate-strengthened shape memory alloys (SMAs), which still remains a mystery heretofore, is of crucial importance to the design of advanced SMAs with optimal functional and mechanical properties. Here, we investigate the lattice strain evolution of, and the stress partition between the nanoscale Ni{sub 4}Ti{sub 3} precipitates and the matrix in a precipitate-strengthened Ni-Ti SMA during different deformation stages by in-situ synchrotron high-energy X-ray diffraction technique. We found that, during R-phase reorientation and stress-induced martensitic transformation, which both involve the shear deformation process, the lattice strain of the nanoscale precipitates drastically increases by a magnitude of 0.5%, which corresponds to an abrupt increase of ∼520 MPa in internal stress. This indicates that stress repartition occurs and most of the stress is transferred to the precipitates during the shear deformation of the matrix. It is further revealed that the nanoscale precipitates which only have a low volume fraction bear a considerable amount of applied stress during all deformation stages investigated, implying that the nanoscale precipitates play an important role in the deformation behavior of the precipitate-strengthened Ni-Ti SMAs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A molecular dynamics study of the effect of thermal boundary conductance on thermal transport of ideal crystal of n-alkanes with different number of carbon atoms

Phase change materials such as n-alkanes that exhibit desirable characteristics such as high latent heat, chemical stability, and negligible supercooling are widely used in thermal energy storage applications. However, n-alkanes have the drawback of low thermal conductivity values. The low thermal conductivity of n-alkanes is linked to formation of randomly oriented nano-domains of molecules in their solid structure that is responsible for excessive phonon scattering at the grain boundaries. Thus, understanding the thermal boundary conductance at the grain boundaries can be crucial for improving the effectiveness of thermal storage systems. The concept of the ideal crystal is proposed in this paper, which describes a simplified model such that all the nano-domains of long-chain n-alkanes are artificially aligned perfectly in one direction. In order to study thermal transport of the ideal crystal of long-chain n-alkanes, four (4) systems (C{sub 20}H{sub 42}, C{sub 24}H{sub 50}, C{sub 26}H{sub 54}, and C{sub 30}H{sub 62}) are investigated by the molecular dynamics simulations. Thermal boundary conductance between the layers of ideal crystals is determined using both non-equilibrium molecular dynamics (NEMD) and equilibrium molecular dynamics (EMD) simulations. Both NEMD and EMD simulations exhibit no significant change in thermal conductance with the molecular length. However, the values obtained from the EMD simulations are less than the values from NEMD simulations with the ratio being nearly three (3) in most cases. This difference is due to the nature of EMD simulations where all the phonons are assumed to be in equilibrium at the interface. Thermal conductivity of the n-alkanes in three structures including liquid, solid, and ideal crystal is investigated utilizing NEMD simulations. Our results exhibit a very slight rise in thermal conductivity values as the number of carbon atoms of the chain increases. The key understanding is that thermal transport can be significantly altered by how the molecules and the nano-domains are oriented in the structure rather than by the length of the n-alkane molecules.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Isovalent substitutes play in different ways: Effects of isovalent substitution on the thermoelectric properties of CoSi{sub 0.98}B{sub 0.02}

Boron-added CoSi, CoSi{sub 0.98}B{sub 0.02}, possesses a very high thermoelectric power factor of 60 μW cm{sup −1} K{sup −2} at room temperature, which is among the highest power factors that have ever been reported for near-room-temperature thermoelectric applications. Since the electrical properties of this material have been tuned properly, isovalent substitution for its host atoms is intentionally employed to reduce the lattice thermal conductivity while maintaining the electronic properties unchanged. In our previous work, the effect of Rh substitution for Co atoms on the thermoelectric properties of CoSi{sub 0.98}B{sub 0.02} has been studied. Here, we present a study of the substitution of Ge for Si atoms in this compound. Even though Ge and Rh are isovalent with their corresponding host atoms, they play different roles in determining the electrical and thermal transport properties. Through the evaluation of the lattice thermal conductivity by the Debye approximation and the comparison between the high-temperature Seebeck coefficients, we propose that Rh substitution leads to a further overlapping of the conduction and the valence bands, while Ge substitution only shifts the Fermi level upward into the conduction band. Our results show that the influence of isovalent substitution on the electronic structure cannot be ignored when the alloying method is used to improve thermoelectric properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗