SEARCH · Engineering Papers

Results for “dielectric properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Effect of dielectric target properties on plasma surface ionization wave propagation

Surface ionization waves (SIWs) propagating along dielectric covered, grounded surfaces have been studied for various dielectric bulk and surface conditions; a dependence on the propagation velocity with respect to dielectric electrical thickness and near surface permittivity profiles are observed. SIWs generated by an atmospheric pressure plasma source are imaged interacting with planar dielectric surface. Surface wave velocity is obtained by tracking emission intensity as a function of time. Target dielectric thickness is varied from $d = 0.15-10$ mm and dielectric constant is varied from $\epsilon_r = 6.21 - 9.4$. The propagation of SIWs can be generally predicted by relating their velocity to the RC time constant of the circuit generated between the plasma and the dielectric surface, but it is found that this approximation breaks down for dielectric substrates of sufficient thickness and wave velocity becomes constant. The results show that wave velocity is stable and predictable for target thicknesses beyond a certain point determined by the permittivity of the target material. It is also shown that SIW propagation is strongly driven by the dielectric material near to the surface of the target in addition to the bulk material. The possible mechanisms driving these thickness dependent behaviors is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1984

K-Band Latching Switches

Design, development, and tests are described for two single-pole-double-throw latching waveguide ferrite switches: a K-band switch in WR-42 waveguide and a Ka-band switch in WR-28 waveguide. Both switches have structurally simple junctions, mechanically interlocked without the use of bonding materials; they are impervious to the effects of thermal, shock, and vibration stresses. Ferrite material for the Ka-band switch with a proper combination of magnetic and dielectric properties was available and resulted in excellent low loss, wideband performance. The high power handling requirement of the K-band switch limited the choice of ferrite to nickel-zinc compositions with adequate magnetic properties, but with too low relative dielectric constant. The relative dielectric constant determines the junction dimensions for given frequency responses. In this case the too low value unavoidably leads to a larger than optimum junction volume, increasing the insertion loss and restricting the operating bandwidth. Efforts to overcome the materials-related difficulties through the design of a composite junction with increased effective dielectric properties efforts to modify the relative dielectric constant of nickel-zinc ferrite are examined.

Piotrowski, W. S.↗

NASA NTRS1990

Multiband radar characterization of forest biomes

The utility of airborne and orbital SAR in classification, assessment, and monitoring of forest biomes is investigated through analysis of orbital synthetic aperature radar (SAR) and multifrequency and multipolarized airborne SAR imagery relying on image tone and texture. Preliminary airborne SAR experiments and truck-mounted scatterometer observations demonstrated that the three dimensional structural complexity of a forest, and the various scales of temporal dynamics in the microwave dielectric properties of both trees and the underlying substrate would severely limit empirical or semi-empirical approaches. As a consequence, it became necessary to develop a more profound understanding of the electromagnetic properties of a forest scene and their temporal dynamics through controlled experimentation coupled with theoretical development and verification. The concatenation of various models into a physically-based composite model treating the entire forest scene became the major objective of the study as this is the key to development of a series of robust retrieval algorithms for forest biophysical properties. In order to verify the performance of the component elements of the composite model, a series of controlled laboratory and field experiments were undertaken to: (1) develop techniques to measure the microwave dielectric properties of vegetation; (2) relate the microwave dielectric properties of vegetation to more readily measured characteristics such as density and moisture content; (3) calculate the radar cross-section of leaves, and cylinders; (4) improve backscatter models for rough surfaces; and (5) relate attenuation and phase delays during propagation through canopies to canopy properties. These modeling efforts, as validated by the measurements, were incorporated within a larger model known as the Michigan Microwave Canopy Scattering (MIMICS) Model.

Dobson, M. Craig↗

NASA NTRS1980

Soil moisture sensing with microwave techniques

Microwave approaches for the remote sensing of soil moisture are discussed, with the advantages described as follows: (1) the all-weather capability, (2) the greater penetration depth into the soil and through vegetation than with optical or infrared sensors, and (3) the large changes in the dielectric properties of soil produced by changes in water content. Both active and passive microwave approaches are discussed. The dependence of the relationship between microwave response and soil moisture on such things as soil texture, surface roughness, vegetative cover and nonuniform moisture and temperature profiles is analyzed from both the experimental and theoretical viewpoints. The dielectric properties of the soil are analyzed quantitatively, as these control the reflective and emissive properties of the soil surface, and a model for estimating a soil's dielectric properties from its texture and moisture content is also presented. Emissivity is calculated using the Fresnel equation of electromagnetic theory, and reflectivity is shown to be decreased by surface roughness, while the backscatter coefficient increases. It is demonstrated, that microwave radiometers are sensitive to soil moisture for a wide range of surface conditions, and that the longer wavelengths are best for soil moisture sensing.

Schmugge, T.↗

NASA NTRS1978

An empirical model for the complex dielectric permittivity of soils as a function of water content

The recent measurements on the dielectric properties of soils shows that the variation of dielectric constant with moisture content depends on soil types. The observed dielectric constant increases only slowly with moisture content up to a transition point. Beyond the transition it increases rapidly with moisture content. The moisture value of transition region was found to be higher for high clay content soils than for sandy soils. Many mixing formulas were compared with, and were found incompatible with, the measured dielectric variations of soil-water mixtures. A simple empirical model was proposed to describe the dielectric behavior of ths soil-water mixtures. The relationship between transition moisture and wilting point provides a means of estimating soil dielectric properties on the basis of texture information.

Wang, J. R.↗

DOE OSTI2022

A study of electroactive polyvinyl chloride (PVC) gel actuators through the use of the electric modulus formalism and cyclic linear voltage sweeps

The conductivity and dielectric properties are integral to the function of polyvinyl chloride (PVC) gel actuators. The frequency-dependent properties of PVC gel actuators are investigated here in terms of their impedance, permittivity, and for the first time, electric modulus. The data shows that PVC gels’ conductive properties are just as, if not more, important as their dielectric properties in electromechanical transduction applications. The electrode polarization (EP) and its impact on the impedance and dielectric spectra of PVC gels, as well as the developed asymmetric space charge at the anode, are discussed. The electric modulus and tan δ spectra are used for the fitting of Cole-Cole (CC) and Debye relaxation models for gels of varying plasticizer content. The electrostatic adhesive force for PVC gels of varying plasticizer is also measured, indicating large electrostatic adhesion (>2 N cm -2 ). A cyclic linear voltage sweep is used to clarify the dynamics of space charge within the gels. The peak current (associated with space charge development) is seen to be concurrent with the onset of mechanical deformation, showing the asymmetric charge as the origin of electromechanical transduction. Additionally, the maximum charge transferred (as measured by the integration of current over time) before space charge development is found to correlate with the electrostatic adhesive force measured for the gels, pointing to a new method of characterizing PVC gels for actuation.

Instruments & Instrumentation↗

NASA NTRS1980

An empirical model for the complex dielectric permittivity of soils as a function of water content

Recent measurements on the dielectric properties of soils have shown that the variation of dielectric constant with moisture content depends on soil types. The observed dielectric constant increases only slowly with moisture content up to a transition point. Beyond the transition it increases rapidly with moisture content. The moisture value at transition region was found to be higher for high clay content soils than for sandy soils. Many mixing formulas reported in the literature were compared with, and were found incompatible with, the measured dielectric variations of soil-water mixtures. A simple empirical model was proposed to describe the dielectric behavior of the soil-water mixtures. This model employs the mixing of either the dielectric constants or the refraction indices of ice, water, rock, and air, and treats the transition moisture value as an adjustable parameter. The calculated mixture dielectric constants from the model were found to be in reasonable agreement with the measured results over the entire moisture range of 0-0.5 cu cm/cu cm. The transition moistures derived from the model range from 0.16 to 0.33 and are strongly correlated with the wilting points of the soils estimated from their textures. This relationship between transition moisture and wilting point provides a means of estimating soil dielectric properties on the basis of texture information.

Wang, J. R.↗

NASA NTRS1973

Lunar sample electrical properties

Electrical conductivity and dielectric constant measurements have been performed in vacuum on solid and soil samples over a wide range of temperatures and frequencies. The temperature dependence and the frequency response of the dielectric properties together with the temperature dependence of the DC conductivity have permitted us to propose a mathematical model describing the mechanisms controlling the electrical properties. In general, each lunar sample has several distributed mechanisms, each mechanism dominant in a particular temperature range.

Olhoeft, G. R.↗

NASA NTRS2012

Electromagnetic Nondestructive Evaluation of Wire Insulation and Models of Insulation Material Properties

Polymers have been widely used as wiring electrical insulation materials in space/air-craft. The dielectric properties of insulation polymers can change over time, however, due to various aging processes such as exposure to heat, humidity and mechanical stress. Therefore, the study of polymers used in electrical insulation of wiring is important to the aerospace industry due to potential loss of life and aircraft in the event of an electrical fire caused by breakdown of wiring insulation. Part of this research is focused on studying the mechanisms of various environmental aging process of the polymers used in electrical wiring insulation and the ways in which their dielectric properties change as the material is subject to the aging processes. The other part of the project is to determine the feasibility of a new capacitive nondestructive testing method to indicate degradation in the wiring insulation, by measuring its permittivity.

Bowler, Nicola↗

DOE OSTI2025

Pressure-induced structural and dielectric changes in liquid water at room temperature

Understanding the pressure-dependent dielectric properties of water is crucial for a wide range of scientific and practical applications. In this study, we employ a deep neural network trained on density functional theory data to investigate the dielectric properties of liquid water at room temperature across a pressure range of 0.1–1000 MPa. We observe a nonlinear increase in the static dielectric constant ɛ 0 with increasing pressure, a trend that is qualitatively consistent with experimental observations. This increase in ɛ 0 is primarily attributed to the increase in water density under compression, which enhances collective dipole fluctuations within the hydrogen-bonding network as well as the dielectric response. Despite the increase in ɛ 0 , our results reveal a decrease in the Kirkwood correlation factor G K with increasing pressure. Furthermore, this decrease in G K is attributed to pressure-induced structural distortions in the hydrogen-bonding network, which weaken dipolar correlations by disrupting the ideal tetrahedral arrangement of water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Photonic time-crystalline behaviour mediated by phonon squeezing in T a 2 NiSe 5

Photonic time crystals refer to materials whose dielectric properties are periodic in time, analogous to a photonic crystal whose dielectric properties is periodic in space. Here, we theoretically investigate photonic time-crystalline behaviour initiated by optical excitation above the electronic gap of the excitonic insulator candidate Ta 2 NiSe 5 . We show that after electron photoexcitation, electron-phonon coupling leads to an unconventional squeezed phonon state, characterised by periodic oscillations of phonon fluctuations. Squeezing oscillations lead to photonic time crystalline behaviour. The key signature of the photonic time crystalline behaviour is terahertz (THz) amplification of reflectivity in a narrow frequency band. The theory is supported by experimental results on Ta 2 NiSe 5 where photoexcitation with short pulses leads to enhanced THz reflectivity with the predicted features. We explain the key mechanism leading to THz amplification in terms of a simplified electron-phonon Hamiltonian motivated by ab-initio DFT calculations. Our theory suggests that the pumped Ta 2 NiSe 5 is a gain medium, demonstrating that squeezed phonon noise may be used to create THz amplifiers in THz communication applications.

36 MATERIALS SCIENCE↗

NASA NTRS1987

Martian surface physical properties to be derived by radar altimeter on the Mars observer spacecraft

The potential is described of a candidate Mars Observer altimeter for determining dielectric properties of Mars regolith. It is pointed out that it is straightforward to use the time between altimeter pulse trains for passive radiometry (hence dielectric properties) and roughness can be derived. Given the mission plan the whole surface can be mapped at least three times, yielding data on seasonal variability.

Garvin, J. B.↗

NASA NTRS1971

Effect of surface moisture on dielectric behavior of ultrafine BaTiO3 particulates.

The effects of adsorbed H2O on the dielectric properties of ultrafine BaTiO3 particulates of varying particle size and environmental history were determined. The dielectric behavior depends strongly on surface hydration. No particle size dependence of dielectric constant was found for dehydroxylated surfaces in ultrafine particulate (unsintered) BaTiO3 materials. For equivalent particle sizes, the ac conductivity is sensitive to surface morphology. Reactions with H2O vapor appear to account for the variations in dielectric properties. Surface dehydration was effectively accomplished by washing as-received powders in isopropanol.

Mountvala, A. J.↗

NASA NTRS1987

Measurements of the dielectric constants for planetary volatiles

The model of Titan at present has the surface temperature, pressure, and composition such that there is a possibility of a binary ethane-methane ocean. Proposed experiments for future Titan flybys include microwave mappers. Very little has been measured of the dielectric properties of the small hydrocarbons at these radar frequencies. An experiment was conducted utilizing a slotted line to measure the dielectric properties of the hydrocarbons, methane to heptane, from room temperature to -180 C. Measurements of the real part of the dielectric constants are accurate to + or - 0.006 and the imaginary part (the loss tangent) of the liquids studied is less than or equal to 0.001. In order to verify this low loss tangent, the real part of the dielectric constant of hexane at 25 C was studied as a function of the frequency range of the slotted line system used. The dielectric constant of hexane at room temperature, between 500 MHz and 3 MHz, is constant within experimental error.

Anicich, Vincent G.↗

DOE OSTI2022

Identification of high-dielectric constant compounds from statistical design

Abstract The discovery of high-dielectric materials is crucial to increasing the efficiency of electronic devices and batteries. Here, we report three previously unexplored materials with very high dielectric constants (69 < ϵ < 101) and large band gaps (2.9 < E g (eV) < 5.5) obtained by screening materials databases using statistical optimization algorithms aided by artificial neural networks (ANN). Two of these new dielectrics are mixed-anion compounds (Eu 5 SiCl 6 O 4 and HoClO) and are shown to be thermodynamically stable against common semiconductors via phase diagram analysis. We also uncovered four other materials with relatively large dielectric constants (20 < ϵ < 40) and band gaps (2.3 < E g (eV) < 2.7). While the ANN training-data are obtained from the Materials Project, the search-space consists of materials from the Open Quantum Materials Database (OQMD)—demonstrating a successful implementation of cross-database materials design. Overall, we report the dielectric properties of 17 materials calculated using ab initio calculations, that were selected in our design workflow. The dielectric materials with high-dielectric properties predicted in this work open up further experimental research opportunities.

36 MATERIALS SCIENCE↗

NASA NTRS1973

Thermal properties of dielectric solids below 4 K. I - Polycarbonate

Polymers and other dielectric materials are frequently used for many purposes in the construction of cryogenic apparatus. Yet very few values of the thermal properties of these materials below 4 K have been reported. It is, however, known that one can not use the Debye theory to extrapolate to lower temperatures the measurements of the specific heat capacity above 1 K. The thermal conductivity also follows no theoretically predictable temperature dependence. As a by-product of our studies of the thermal properties of amorphous and partly crystalline materials below 4 K, we wish to report values for the thermal conductivity, specific heat capacity, and velocity of sound below 4 K in materials useful for the construction of cryogenic apparatus. In this article we will describe our measurement techniques and report values for polycarbonate (Lexan). In subsequent notes we will give values for other materials of interest.

Cieloszyk, G. S.↗

NASA NTRS1997

Dielectric Spectroscopy Study of ZnSe Grown by Physical Vapor Transport

The dielectric properties of ZnSe samples grown by physical vapor transport were measured as a function of frequency. Differences can be seen in the dielectric properties of samples grown under different conditions. The spectra of heat treated samples were also acquired and were found to exhibit significant deviations from those of the as grown crystals.

Kokan, J.↗

NASA NTRS1997

Dielectric Spectroscopy Study of ZnSe Grown by Physical Vapor Transport

Kokan, Julie L.↗