Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “detonation wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

On the Exit Boundary Condition for One-Dimensional Calculations of Pulsed Detonation Engine Performance

In one-dimensional calculations of pulsed detonation engine (PDE) performance, the exit boundary condition is frequently taken to be a constant static pressure. In reality, for an isolated detonation tube, after the detonation wave arrives at the exit plane, there will be a region of high pressure, which will gradually return to ambient pressure as an almost spherical shock wave expands away from the exit, and weakens. Initially, the flow is supersonic, unaffected by external pressure, but later becomes subsonic. Previous authors have accounted for this situation either by assuming the subsonic pressure decay to be a relaxation phenomenon, or by running a two-dimensional calculation first, including a domain external to the detonation tube, and using the resulting exit pressure temporal distribution as the boundary condition for one-dimensional calculations. These calculations show that the increased pressure does affect the PDE performance. In the present work, a simple model of the exit process is used to estimate the pressure decay time. The planar shock wave emerging from the tube is assumed to transform into a spherical shock wave. The initial strength of the spherical shock wave is determined from comparison with experimental results. Its subsequent propagation, and resulting pressure at the tube exit, is given by a numerical blast wave calculation. The model agrees reasonably well with other, limited, results. Finally, the model was used as the exit boundary condition for a one-dimensional calculation of PDE performance to obtain the thrust wall pressure for a hydrogen-air detonation in tubes of length to diameter ratio (L/D) of 4, and 10, as well as for the original, constant pressure boundary condition. The modified boundary condition had no performance impact for values of L/D > 10, and moderate impact for L/D = 4.

Wilson, Jack↗
NASA NTRS1985

Dynamic features of combustion

The dynamic features of combustion are discussed for four important cases: ignition, inflammation, explosion, and detonation. Ignition, the initiation of a self-sustained exothermic process, is considered in the simplest case of a closed thermodynamic system and its stochastic distribution. Inflammation, the initiation and propagation of self-sustained flames, is presented for turbulent flow. Explosion, the dynamic effects caused by the deposition of exothermic energy in a compressible medium, is illustrated by self-similar blast waves with energy deposition at the front and the adiabatic non-self-similar wave. Detonation, the most comprehensive illustration of all the dynamic effects of combustion, is discussed with a phenomenological account of the development and structure of the wave.

Oppenheim, A. K.↗
NASA NTRSDate not supplied

Cryogenic Extension of NASA Species Polynomials Using Hydrogen and Oxygen at Stoichiometry

The Helmholtz free energy for a mixture has been used in many chemistry and combustion studies for mixtures. An approach is described where polynomial fits intended for a thermally perfect ideal gases can be modified and implemented into a Helmholtz free energy model, such as those used by NIST in their REFPROP program. However, the limitation of the polynomial fits must be respected and should only used in a valid temperature interval where the flow field can be treated as a thermally perfect ideal gas when these species are present. This approach can allow a CFD simulation to have cryogenic regions of a flow field where high fidelity cryogenic species models are needed and allows for the use of species in other areas at higher temperatures where combustion species do not have such a model available or is not needed. Presented in the paper are CFD 1D detonation wave and species mass fraction simulation results which have cryogenic upstream conditions of Hydrogen and Oxygen at stoichiometry.

Combustion↗
NASA NTRS1961

Thermodynamic Calculations of Hydrogen-Oxygen Detonation Parameters for Various Initial Pressures

Composition, temperature, pressure and density behind a stable detonation wave and its propagation rate have been calculated for seven hydrogen-oxygen mixture at 1, 5, 25 and 100 atm initial pressure, and at an initial temperature of 40C. For stoichiometric mixtures that calculations also include an initial temperature of 200C. According to these calculations the detonation velocities of hydrogen-oxygen mixtures increase with increasing initial pressure, but decrease slightly when the initial temperature is raised from 40 to 200 C. The calculated detonation velocities agree satisfactorily with values determined experimentally. These values will be published in the near future.

Bollinger, Loren E.↗
NASA NTRS1991

A new site for the astrophysical gamma-process

The study suggests that the requisite thermodynamic conditions may occur when carbon-oxygen white dwarfs explode by deflagration or detonation. When these stars undergo such explosive disruption, there will be a region near the surface where the burning temperature lies in the 2.4-3.2 range. To examine this astrophysical site, calculations are performed for an s-process nucleosynthesis during helium shell flashes and the nuclear transmission taking place when such mass zones are heated by the deflagration or detonation wave, and the results are compared with the solar-system distribution of the p-isotopes. It is demonstrated that Type Ia supernovas provide a viable site for the gamma process, and that the same thermodynamic conditions would also exist in Type II-p powered supernovas, provided that they are powered by detonation.

Howard, W. Michael↗
NASA NTRS1975

On presupernova dynamical mass ejection by non-detonated stellar cores

Stars in the range of 4 to 8 solar masses are known to develop degenerate carbon-oxygen cores of about 1.4 solar masses. Arguments are presented why, contrary to past assumption, carbon ignition may not lead to the formation of a detonation wave. Rather, an initially subsonic burning front results which subsequently may be brought under control by adiabatic expansion. This dynamic phase leads to a centrally incinerated and expanded core. The loosely bound red-giant envelope is ejected to form an extended nebula. Neutrino cooling of the core finally induces collapse. Provided that sufficient energy is liberated in the dynamic formation of a neutron star, a supernova event will result. The distended nebula is ideally suited for the production of the visible supernova light curves. Thus, carbon nondetonation may give a viable alternative evolution to supernovae that avoids the impasse encountered by the detonation-disrupted models.

Buchler, J.-R.↗
NASA NTRSDate not supplied

High-Speed Visualization of Spray Breakup in a Rotating Detonation Combustor Using Laser Induced Fluorescence

Rotating detonation engines (RDEs) represent a novel propulsion technology where incoming reactants are consumed by a self-sustaining detonation wave that travels azimuthally around an annular combustion chamber. In theory, the operating mode of these devices approximates a constant-volume combustion Humphry cycle. This represents a 5-15% increase in thermal efficiency over current rockets and air breathing systems operating on constant-pressure combustion Brayton cycles. The use of liquid fuels in RDEs represent unique challenges in terms of performance and operability. However, the fundamental physics involved in spray breakup, evaporation, and combustion are not well understood inside these devices. This research seeks to provide direct insight into these processes by adding a single liquid fuel injector into an otherwise hydrogen-air RDE to evaluate the breakup and refill dynamics. Visualization is performed by 200-1000 kHz laser induced fluorescence of liquid phase diesel (355 nm) and or kerosene (266 nm).

Detonation↗
NASA NTRS1969

Implosion-driven shock tube

Detonation wave striking PETN explosive shell producing implosion or implosion wave in shock tube

Glass, I. I.↗
NASA NTRS1971

Gasdynamics of explosions today.

A brief review is given of blast and detonation wave phenomena and some of their uses in war and peace. It is concluded that great strides have been made over the last three decades toward the physical understanding, the analytical-numerical solution, and the measurement of dynamic and thermodynamic quantities, also taking into consideration severe environments and extremely short durations. Questions of internal ballistics are discussed together with hypervelocity launchers and shock tubes, collapsing cylindrical drivers, spherical implosions, explosive weapons, dynamic response, and equation of state data.

Brode, H. L.↗
NASA NTRS1972

The simulation of high pressure hydrogen/oxygen rocket engines.

Initial experiments have established the feasibility of using a backward running detonation wave in a shock tube to produce the correct enthalpy and chemistry of the simulated combustion chamber gases. This technique produces plume Reynolds numbers higher than those achievable by any other known technique. The practical pressure limitations are being explored and detailed surveys of both single and multiple engine plumes and impingement data on a cylindrical body are being obtained. Facility details to allow safe handling of the high pressure hydrogen and oxygen up to a design chamber pressure of 20,000 psi are described.

Hopkins, H.↗