Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “depth profiling techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Simulations of Firn Processes Over the Greenland and Antarctic Ice Sheets: 1980-2021

Conversion of altimetry-derived ice-sheet volume change to mass requires an understanding of the evolution of the combined ice and air content within the firn column. In the absence of suitable techniques to observe the changes to the firn column across the entirety of an ice sheet, the firn column processes are typically modeled. Here, we present new simulations of firn processes over the Greenland and Antarctic ice sheets (GrIS and AIS) using the Community Firn Model and atmospheric reanalysis variables for more than four decades. A data set of more than 250 measured depth–density profiles from both ice sheets provides the basis of the calibration of the dry-snow densification scheme. The resulting scheme results in a reduction in the rate of densification, relative to a commonly used semi-empirical model, through a decreased dependence on the accumulation rate, a proxy for overburden stress. The 1980–2020 modeled firn column runoff, when combined with atmospheric variables from MERRA-2, generates realistic mean integrated surface mass balance values for the Greenland (+390 Gt yr(exp −1)) and Antarctic (+2612 Gt yr(exp −1)) ice sheets when compared to published model-ensemble means. We find that seasonal volume changes associated with firn air content are on average approximately 2.5 times larger than those associated with mass fluxes from surface processes for the AIS and 1.5 times larger for the GrIS; however, when averaged over multiple years, ice and air-volume fluctuations within the firn column are of comparable magnitudes. Between 1996 and 2019, the Greenland Ice Sheet lost nearly 5% of its firn air content, indicating a reduction in the total meltwater retention capability. Nearly all (94 %) of the meltwater produced over the Antarctic Ice Sheet is retained within the firn column through infiltration and refreezing.

Greenland↗
NASA NTRS1990

Comparison of the ultrastructure of conventionally fixed and high pressure frozen/freeze substituted root tips of Nicotiana and Arabidopsis

To circumvent the limitations of chemical fixation (CF) and to gain more reliable structural information about higher plant tissues, we have cryofixed root tips of Nicotiana and Arabidopsis by high pressure freezing (HPF). Whereas other freezing techniques preserve tissue to a relatively shallow depth, HPF in conjunction with freeze substitution (FS) resulted in excellent preservation of entire root tips. Compared to CF, in tissue prepared by HPF/FS: (1) the plasmalemma and all internal membranes were much smoother and often coated on the cytoplasmic side by a thin layer of stained material, (2) the plasmalemma was appressed to the cell wall, (3) organelle profiles were rounder, (4) the cytoplasmic, mitochondrial, and amyloplast matrices were denser, (5) vacuoles contained electron dense material, (6) microtubules appeared to be more numerous and straighter, with crossbridges observed between them, (7) cisternae of endoplasmic reticulum (ER) were wider and filled with material, (8) Golgi intercisternal elements were more clearly resolved and were observed between both Golgi vesicles and cisternae, and (9) larger vesicles were associated with Golgi stacks. This study demonstrates that HPF/FS can be used to successfully preserve the ultrastructure of relatively large plant tissues without the use of intracellular cryoprotectants.

NASA Program Space Biology↗
NASA NTRS2013

Laboratory Instruments Available to Support Space Station Researchers at Marshall Space Flight Center

A number of research instruments are available at NASA's Marshall Space Flight Center (MSFC) to support ISS researchers and their investigations. These modern analytical tools yield valuable and sometimes new informative resulting from sample characterization. Instruments include modern scanning electron microscopes equipped with field emission guns providing analytical capabilities that include angstron-level image resolution of dry, wet and biological samples. These microscopes are also equipped with silicon drift X-ray detectors (SDD) for fast yet precise analytical mapping of phases, as well as electron back-scattered diffraction (EBSD) units to map grain orientations in crystalline alloys. Sample chambers admit large samples, provide variable pressures for wet samples, and quantitative analysis software to determine phase relations. Advances in solid-state electronics have also facilitated improvements for surface chemical analysis that are successfully employed to analyze metallic materials and alloys, ceramics, slags, and organic polymers. Another analytical capability at MSFC is a mganetic sector Secondary Ion Mass Spectroscopy (SIMS) that quantitatively determines and maps light elements such as hydrogen, lithium, and boron along with their isotopes, identifies and quantifies very low level impurities even at parts per billion (ppb) levels. Still other methods available at MSFC include X-ray photo-electron spectroscopy (XPS) that can determine oxidation states of elements as well as identify polymers and measure film thicknesses on coated materials, Scanning Auger electron spectroscopy (SAM) which combines surface sensitivity, spatial lateral resolution (approximately 20 nm), and depth profiling capabilities to describe elemental compositions in near surface regions and even the chemical state of analyzed atoms. Conventional Transmission Electron Microscope (TEM) for observing internal microstructures at very high magnifications and the Electron Probe Micro-analyzer (EPMA) for very precise microanalysis are available as needed by the researcher. Space Station researchers are invited to work with MSFC in analyzing their samples using these techniques.

Panda, Binayak↗
NASA NTRS2009

Microwave Treatment for Cardiac Arrhythmias

NASA seeks to transfer the NASA developed microwave ablation technology, designed for the treatment of ventricular tachycardia (irregular heart beat), to industry. After a heart attack, many cells surrounding the resulting scar continue to live but are abnormal electrically; they may conduct impulses unusually slowly or fire when they would typically be silent. These diseased areas might disturb smooth signaling by forming a reentrant circuit in the muscle. The objective of microwave ablation is to heat and kill these diseased cells to restore appropriate electrical activity in the heart. This technology is a method and apparatus that provides for propagating microwave energy into heart tissues to produce a desired temperature profile therein at tissue depths sufficient for thermally ablating arrhythmogenic cardiac tissue while preventing excessive heating of surrounding tissues, organs, and blood. A wide bandwidth double-disk antenna is effective for this purpose over a bandwidth of about six gigahertz. A computer simulation provides initial screening capabilities for an antenna such as antenna, frequency, power level, and power application duration. The simulation also allows optimization of techniques for specific patients or conditions. In comparison with other methods that involve direct-current pulses or radio frequencies below 1 GHz, this method may prove more effective in treating ventricular tachycardia. This is because the present method provides for greater control of the location, cross-sectional area, and depth of a lesion via selection of the location and design of the antenna and the choice of microwave power and frequency.

Hernandez-Moya, Sonia↗
NASA NTRS1992

The thermal structure, dust loading, and meridional transport in the Martian atmosphere during late southern summer

We have derived a comprehensive picture of the thermal structure and dust loading of the Martian atmosphere in a relatively clear period during late southern summer. Using a new technique for the simultaneous retrieval of atmospheric temperatures and airborne dust abundances, we examined a subset of the Mariner 9 infrared interferometer spectrometer (IRIS) thermal emission spectra spanning L sub s = 343 degrees to 348 degrees. Global maps of temperature and dust optical depth as functions of latitude (plus or minus 90 degrees), altitude (approx. 0-60 km), and Mars local time of day were constructed from the profiles from individual spectra. One of the principal conclusions from this work is that both dayside and nightside atmospheric temperatures at altitudes above about 40 km are warmer over the winter (north) polar regions than over the equator or the summer (south) polar regions. These anomalous temperatures are consistent with ground-based observations of polar warming at higher altitudes (50-85 km), and they indicate that the atmosphere is not in radiative equilibrium. Zonal-mean zonal winds are derived from the observed meridional gradients of the zonally averaged temperatures assuming geostrophy and zero surface zonal wind. The intense eastward jets (with velocities exceeding 120 m/s) correspond to regions of strong horizontal temperature gradients. Similar calculations have been reported previously, but they were not global in coverage. Both the zonal-mean meridional circulation and large-scale waves contribute to the north-south atmospheric transport.

Santee, M.↗
NASA NTRS2003

Ceramic Strain Gages for Use at Temperatures up to 1500 Celsius

Indium-tin-oxide (ITO) thin film strain gages were successfully demonstrated at temperatures beyond 1500 C. High temperature static strain tests revealed that the piezoresistive response and electrical stability of the ceramic sensors depended on the thickness of the ITO films comprising the active strain elements. When 2.5 microns-thick ITO films were employed as the active strain elements, the piezoresistive response became unstable at temperatures above 1225 C. In contrast to this, ceramic sensors prepared with 5 microns-thick ITO were stable beyond 1430 C and sensors prepared with 8 microns-thick ITO survived more than 20 hr of operation at 1481 C. Very thick (10 microns) ITo strain gages were extremely stable and responsive at 1528 C. ESCA depth profiles confirmed that an interfacial reaction between the ITO strain gage and alumina substrate was responsible for the high temperature electrical stability observed. Similar improvements in high temperature stability were achieved by doping the active ITO strain elements with aluminum. Several Sic-Sic CMC constant strain beams were instrumented with ITO strain gages and delivered to NASA for testing. Due to the extreme surface roughness of the CMC substrates, new lithography techniques and surface preparation methods were developed. These techniques relied heavily on a combination of Sic and A12O3 cement layers to provide the necessary surface finish for efficient pattern transfer. Micro-contact printing using soft lithography and PDMS stamps was also used to successfully transfer the thin film strain gage patterns to the resist coated CMC substrates. This latter approach has considerable potential for transferring the thin film strain gage patterns to the extremely rough surfaces associated with the CMC's.

Gregory, Otto↗
NASA NTRS1980

Soil moisture sensing with microwave techniques

Microwave approaches for the remote sensing of soil moisture are discussed, with the advantages described as follows: (1) the all-weather capability, (2) the greater penetration depth into the soil and through vegetation than with optical or infrared sensors, and (3) the large changes in the dielectric properties of soil produced by changes in water content. Both active and passive microwave approaches are discussed. The dependence of the relationship between microwave response and soil moisture on such things as soil texture, surface roughness, vegetative cover and nonuniform moisture and temperature profiles is analyzed from both the experimental and theoretical viewpoints. The dielectric properties of the soil are analyzed quantitatively, as these control the reflective and emissive properties of the soil surface, and a model for estimating a soil's dielectric properties from its texture and moisture content is also presented. Emissivity is calculated using the Fresnel equation of electromagnetic theory, and reflectivity is shown to be decreased by surface roughness, while the backscatter coefficient increases. It is demonstrated, that microwave radiometers are sensitive to soil moisture for a wide range of surface conditions, and that the longer wavelengths are best for soil moisture sensing.

Schmugge, T.↗
NASA NTRS1984

Modeling crater topography and albedo from monoscopic Viking Orbiter images. I - Methodology

The methodology for a new photoclinometric technique for extracting topographic data from planetary images is described. The technique fully compensates for oblique viewing geometry prevalent in many spacecraft images. Brightness data are taken from a pair of profiles simultaneously, overcoming the problem of albedo variations in the application of photoclinometry to planetary surfaces. An additional procedure is described for eliminating the requirement of topographic symmetry along a pair of profiles. Test results show that both procedures have an accuracy of about two degrees for slopes of typical bowl-shaped craters, or about 5 percent for depths.

Davis, P. A.↗
NASA NTRS2000

Retrieving the Vertical Structure of the Effective Aerosol Complex Index of Refraction from a Combination of Aerosol in Situ and Remote Sensing Measurements During TARFOX

The largest uncertainty in estimates of the effects of atmospheric aerosols on climate stems from uncertainties in the determination of their microphysical properties, including the aerosol complex index of refraction, which in turn determines their optical properties. A novel technique is used to estimate the aerosol complex index of refraction in distinct vertical layers from a combination of aerosol in situ size distribution and remote sensing measurements during the Tropospheric Aerosol Radiative Forcing Observational Experiment (TARFOX). In particular, aerosol backscatter measurements using the NASA Langley LASE (Lidar Atmospheric Sensing Experiment) instrument and in situ aerosol size distribution data are utilized to derive vertical profiles of the 'effective' aerosol complex index of refraction at 815 nm (i.e., the refractive index that would provide the same backscatter signal in a forward calculation on the basis of the measured in situ particle size distributions for homogeneous, spherical aerosols). A sensitivity study shows that this method yields small errors in the retrieved aerosol refractive indices, provided the errors in the lidar derived aerosol backscatter are less than 30% and random in nature. Absolute errors in the estimated aerosol refractive indices are generally less than 0.04 for the real part and can be as much as 0.042 for the imaginary part in the case of a 30% error in the lidar-derived aerosol backscatter. The measurements of aerosol optical depth from the NASA Ames Airborne Tracking Sunphotometer (AATS-6) are successfully incorporated into the new technique and help constrain the retrieved aerosol refractive indices. An application of the technique to two TARFOX case studies yields the occurrence of vertical layers of distinct aerosol refractive indices. Values of the estimated complex aerosol refractive index range from 1.33 to 1.45 for the real part and 0.001 to 0.008 for the imaginary part. The methodology devised in this study provides, for the first time a complete set of vertically resolved aerosol size distribution and refractive index data, yielding the vertical distribution of aerosol optical properties required for the determination of aersol-induced radiative flux changes

Redemann, J.↗
NASA NTRS1975

Venus - Vertical structure of stratospheric hazes from Mariner 10 pictures

An 'optical barometer' technique for determining the altitudes of haze in the stratosphere of Venus is presented wherein the Rayleigh-scattering component is derived by comparing orange and UV brightness profiles for nearby Mariner 10 television-picture pairs. The derived scale height for CO2 gas is 4.2 km, corresponding to a temperature of 200 K, in good agreement with radio occultation data. The optical barometer yields a pressure of 4 mb for the level at which the slant-path optical depth at the limb is unity. This level corresponds to a distance from the center of Venus equal to 6131 km, which is accurate to within 1 km provided that there is no appreciable contribution to the brightness by Rayleigh-scattering aerosols which mimic CO2 gas. It is possible that the limb haze layering observed between 6130 and 6140 km could be correlated with temperature inversions detected by the Mariner 5 radio-occultation experiment. A model is proposed wherein the concentration of particles increases rapidly with an effective scale height of about 2 km as one descends about 10 km from the limb haze to the main polarization cloud deck.

Oleary, B.↗
NASA NTRS1992

The topography of impact craters in 'softened' terrain on Mars

The technique of photoclinometry is applied here to Viking orbiter images of Mars in order to derive topographic profiles across Martian craters on both softened and unsoftened terrain. The results demonstrate that craters on the two kinds of terrain are in fact topographically distinct. Both simple and complex softened craters are characterized by more convex-upward crater walls than are unsoftened craters, and both simple and complex softened craters have rounder crater rims. Softened complex craters have modestly smaller crater depths than unsoftened complex craters. Both the rim heights and bowl depths are reduced, with the rim heights reduced more. Softened simple craters have much smaller crater depths than unsoftened simple craters. Both the rim heights and bowl depths are reduced, with the bowl depths reduced more.

Jankowski, David G.↗
NASA NTRS2000

Retrieving the Vertical Structure of the Effective Aerosol Complex Index of Refraction from a Combination of Aerosol in Situ and Remote Sensing Measurements During TARFOX

The largest uncertainty in estimates of the effects of atmospheric aerosols on climate stems from uncertainties in the determination of their microphysical properties, including the aerosol complex index of refraction, which in turn determines their optical properties. A novel technique is used to estimate the aerosol complex index of refraction in distinct vertical layers from a combination of aerosol in situ size distribution and remote sensing measurements during the Tropospheric Aerosol Radiative Forcing Observational Experiment (TARFOX). In particular, aerosol backscatter measurements using the NASA Langley LASE (Lidar Atmospheric Sensing Experiment) instrument and in situ aerosol size distribution data are utilized to derive vertical profiles of the "effective" aerosol complex index of refraction at 815 nm (i.e., the refractive index that would provide the same backscatter signal in a forward calculation on the basis of the measured in situ particle size distributions for homogeneous, spherical aerosols). A sensitivity study shows that this method yields small errors in the retrieved aerosol refractive indices, provided the errors in the lidar-derived aerosol backscatter are less than 30% and random in nature. Absolute errors in the estimated aerosol refractive indices are generally less than 0.04 for the real part and can be as much as 0.042 for the imaginary part in the case of a 30% error in the lidar-derived aerosol backscatter. The measurements of aerosol optical depth from the NASA Ames Airborne Tracking Sunphotometer (AATS-6) are successfully incorporated into the new technique and help constrain the retrieved aerosol refractive indices. An application of the technique to two TARFOX case studies yields the occurrence of vertical layers of distinct aerosol refractive indices. Values of the estimated complex aerosol refractive index range from 1.33 to 1.45 for the real part and 0.001 to 0.008 for the imaginary part. The methodology devised in this study provides, for the first time, a complete set of vertically resolved aerosol size distribution and refractive index data. yielding the vertical distribution of aerosol optical properties required for the determination of aerosol-induced radiative flux changes.

Redemann, J.↗
NASA NTRS1973

Depth profile of Mn-53 in the lunar surface

Measurements of cosmic-ray produced Mn-53 are reported for a series of lunar surface samples down to a depth of 416 g/sq cm. These results clearly illustrate the decrease in activity with depth as the incident galactic cosmic rays are absorbed. Below 60 g/sq cm the production rate decreases exponentially with a mean length of about 220 g/sq cm. These results indicate that, at the Apollo 15 site, the lunar regolith has been unmixed, on a meter scale, for the last 5 m.y. The neutron activation technique for Mn-53, which allowed samples smaller than 200 mg to be used for these measurements, is described.

Imamura, M.↗
NASA NTRS2003

Investigation of Overlap Correction Techniques for Application in the Micro-Pulse Lidar Network (MPLNET)

The Micro-Pulse Lidar NETwork (MPLNET) is comprised of micro-pulse lidars (MPL) stationed around the globe to provide measurements of aerosol and cloud vertical distribution on a continuous basis. MPLNET sites are co-located with sunphotometers in the AErosol Robotic NETwork (AERONET) to provide joint measurements of aerosol optical depth, size, and other inherent optical properties. The IPCC 2001 report discusses . the importance of obtaining routine measurements of aerosol vertical structure, especially for absorbing aerosols. MPLNET provides exactly this sort of measurement, including calculation of aerosol extinction profiles, in a near real-time basis for all sites in the network. In order to obtain aerosol profiles, near range signal returns (0-6 km) must be accurately measured by the MPL. This measurement is complicated by the instrument s overlap range: Le., the minimum distance at which returning signals are completely in the instrument s field-of-view (FOV). Typical MPL overlap distances are large, between 5 - 6 km, due to the narrow FOV of the MPL receiver. A function describing the MPL overlap must be determined and used to correct signals in this range. Currently, overlap functions for MPLNET are determined using horizontal MPL measurements along a path with 10-1 5 km clear line-of-sight and a homogenous atmosphere. These conditions limit the location and ease in which successful overlaps can be obtained. Furthermore, the current MPLNET process of correcting for overlap increases the uncertainty and bias error for the near range signals and the resulting aerosol extinction profiles. To address these issues, an alternative overlap correction method using a small-diameter, wide FOV receiver is being considered for potential use in MPLNET. The wide FOV receiver has a much shorter overlap distance and will be used to calculate the overlap function of the MPL receiver. This approach has a significant benefit in that overlap corrections could be obtained without the need for horizontal measurements. A review of both overlap methods is presented, including a discussion of the impact on reducing the uncertainty and bias error in MPLNET aerosol profiles.

Berkoff, Timothy A.↗
NASA NTRS1984

Mineralogical comparison and cooling history of lunar and chondritic vesicular melt breccias

Lunar sample 77135, an impact melt breccia full of vesicles, has been reinvestigated by electron microprobe and X-ray diffraction techniques and compared with a vesicular melt LL chondrite, Yamato 790964, in an attempt to understand their impact heating processes and subsequent cooling history. Notable similarities between the lunar and chondritic melt breccias include: abundant vesicles, similar pyroxene chemical zoning trends, the presence of variable amounts of clastic material, and similar chemical compositions except for K and Na contents of glass and mesostasis. Some constraints on the cooling history are estimated from Mg-Fe diffusion profiles in olivine and pyroxene. The burial depth of lunar sample 77135 during cooling was 0.2-100 m; the depth for the chondrite was probably smaller. Impact melts were probably produced and a layer of regolith retained on the parent body sufficiently thick to allow the olivines to homogenize during slow cooling.

Miyamoto, M.↗
NASA NTRS1992

Code validation for the simulation of supersonic viscous flow about the F-16XL

The viewgraphs and discussion on code validation for the simulation of supersonic viscous flow about the F-16XL are provided. Because of the large potential gains related to laminar flow on the swept wings of supersonic aircraft, interest in the applications of laminar flow control (LFC) techniques in the supersonic regime has increased. A supersonic laminar flow control (SLFC) technology program is currently underway within NASA. The objective of this program is to develop the data base and design methods that are critical to the development of laminar flow control technology for application to supersonic transport aircraft design. Towards this end, the program integrates computational investigations underway at NASA Ames-Moffett and NASA Langley with flight-test investigations being conducted on the F-16XL at the NASA Ames-Dryden Research Facility in cooperation with Rockwell International. The computational goal at NASA Ames-Moffett is to integrate a thin-layer Reynolds averaged Navier-Stokes flow solver with a stability analysis code. The flow solver would provide boundary layer profiles to the stability analysis code which in turn would predict transition on the F-16XL wing. To utilize the stability analysis codes, reliable boundary layer data is necessary at off-design cases. Previously, much of the prediction of boundary layer transition has been accomplished through the coupling of boundary layer codes with stability theory. However, boundary layer codes may have difficulties at high Reynolds numbers, of the order of 100 million, and with the current complex geometry in question. Therefore, a reliable code which solves the thin-layer Reynolds averaged Navier-Stokes equations is needed. Two objectives are discussed, the first in greater depth. The first objective is method verification, via comparisons of computations with experiment, of the reliability and robustness of the code. To successfully implement LFC techniques to the F-16XL wing, the flow about the leading edge must be maintained as laminar flow. Therefore, the second objective is to focus on a series of numerical simulations with different values of angle of attack, alpha, and Reynolds numbers. The purpose of the simulations is to study their effects on the two main factors which precipitate transition to turbulence at leading edges of highly swept wings (e.g., 'spanwise contamination' and 'crossflow instability').

Flores, Jolen↗
NASA NTRS2013

Atmospheric CO2 Column Measurements with an Airborne Intensity-Modulated Continuous-Wave 1.57-micron Fiber Laser Lidar

The 2007 National Research Council (NRC) Decadal Survey on Earth Science and Applications from Space recommended Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) as a mid-term, Tier II, NASA space mission. ITT Exelis, formerly ITT Corp., and NASA Langley Research Center have been working together since 2004 to develop and demonstrate a prototype Laser Absorption Spectrometer for making high-precision, column CO2 mixing ratio measurements needed for the ASCENDS mission. This instrument, called the Multifunctional Fiber Laser Lidar (MFLL), operates in an intensity-modulated, continuous-wave mode in the 1.57- micron CO2 absorption band. Flight experiments have been conducted with the MFLL on a Lear-25, UC-12, and DC-8 aircraft over a variety of different surfaces and under a wide range of atmospheric conditions. Very high-precision CO2 column measurements resulting from high signal-to-noise (great than 1300) column optical depth measurements for a 10-s (approximately 1 km) averaging interval have been achieved. In situ measurements of atmospheric CO2 profiles were used to derive the expected CO2 column values, and when compared to the MFLL measurements over desert and vegetated surfaces, the MFLL measurements were found to agree with the in situ-derived CO2 columns to within an average of 0.17% or approximately 0.65 ppmv with a standard deviation of 0.44% or approximately 1.7 ppmv. Initial results demonstrating ranging capability using a swept modulation technique are also presented.

Dobler, Jeremy T.↗
NASA NTRSDate not supplied

Airborne HSRL Assessment of CALIOP Aerosol Extinction Retrievals Constrained by Column AOD

Current operational CALIOP aerosol extinction profile retrievals usually rely on accurately specifying the relationship between aerosol extinction and backscattering (i.e. lidar ratio). Uncertainties in the assigned lidar ratios are typically the largest source of systematic error (~30-50%) in the CALIOP retrievals of aerosol extinction, backscatter, and aerosol optical depth. Alternatively, column aerosol optical depth (AOD) can be used to solve the lidar equation and obtain column-equivalent lidar ratios and retrieve aerosol extinction profiles from the CALIOP attenuated backscatter profiles. These derived lidar ratios correspond to the aerosols in the altitude range from 0-7 km. We derive column-equivalent aerosol lidar ratios and aerosol extinction profiles from CALIOP attenuated backscatter profiles constrained using co-located column AODs provided by several instruments/techniques: Synergized Optical Depth of Aerosols (SODA), Ocean-Derived Column Optical Depths (ODCOD), MODIS (dark target), MODIS (Multi-Angle Implementation of Atmospheric Correction-MAIAC), and PARASOL (Generalized Retrieval of Aerosol and Surface Properties-GRASP). These various retrievals of AOD and the column-average aerosol lidar ratios and aerosol extinction profiles derived from CALIOP using these AOD constraints are evaluated using the extensive record of coincident and co-located airborne HSRL measurements of AOD, aerosol lidar ratio, and aerosol extinction profiles acquired during more than 140 HSRL underflights of CALIPSO since 2006. The HSRL technique allows for the independent measurement of extinction and backscatter without the need for external constraints or assumptions regarding the lidar ratios. Initial comparisons with these coincident HSRL aerosol extinction profiles show that the CALIOP aerosol extinction profiles retrieved using these various AOD constraints are generally in better agreement with the HSRL measurements than aerosol extinction profiles from the operational techniques. The quality of agreement depends on the accuracy and magnitude of the AOD constraint. We present these comparisons of AOD, column aerosol lidar ratio, and aerosol extinction profiles for each of the AOD constraints described above.

lidar↗