Chiral Spin Liquid Phase of the Triangular Lattice Hubbard Model: A Density Matrix Renormalization Group Study
Not Available
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
SEARCH · Engineering Papers
Results for “density model”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Computational Challenges in the development of a surrogate model for Density Functional Theory calculations.
Abstract not provided.
Rajamanickam, Sivasankaran↗
Height Variation of Gaps in 150‐km Echoes and Whole Atmosphere Community Climate Model Electron Densities Suggest Link to Upper Hybrid Resonance
Explore the source record for details and available documents.
Gerald A. Lehmacher↗
Middle atmosphere density and models
The 80 to 130 km altitude region is our old ignorosphere, the region of the atmosphere that no one seems to be interested in and yet the critical region for shuttle entry and atmospheric braking. Comparison between the Air Force reference atmosphere and Shuttle Inertial Measurement Units data shows large fluctuations at high latitudes. New data sources are available now, such as the Arecibo and Millstone Hill ionospheric scatter radars. In the 20 to 80 km altitude range there is a reasonable quantity of data on the mean atmosphere, however, infomation on diurnal variability is needed. In the 20 to 80 km altitude range data is needed to identify systematic variations and models for the regions are preliminary. Unpredictable variations are observed: turbulence, storm effects, gravity waves.
Champion, K.↗
The study of coronal plasma structures and fluctuations with Faraday rotation measurements
We report dual-frequency, polarimetric measurements of Faraday rotation of extragalactic radio sources viewed through the solar corona. The observations were made at the Very Large Array in 1990 during solar maximum. Of the nine observed, an excess rotation measure of -12.6 rad/sq m was detected for one source (0010+005), which was observed at an elongation of about 9 solar radii. This measurement is in fair agreement with an a priori model rotation measure of -8.6 rad/sq m estimated from coronal potential field models and the electron density model of Paetzold et al. (1992). Our measurement provides a value for the coronal magnetic field strength at 9 solar radii given a knowledge of the magnetic field sector structure, of 12.5 +/- 2.3 mG. Rotation measurements of 0010+005 were made approximately once per hour over an 11 hr period. During this interval, a slow change of about 1 rad/sq m/hr in rotation measure was detected. Although we are not absolutely certain that this drift is not unremoved ionospheric Faraday rotation, extensive analysis of data from the other sources suggests that this is not the case (Sakurai & Spangler 1994). The very long timescale for this variation argues against the agency of magnetohydrodynamics (MHD) waves, and we suggest occultation of 0010+005 by relatively static plasma structures in the corona. We filtered our rotation measure time series to search for variations on an hourly timescale, such as those reported by Hollweg et al. (1992), which could be attributed to coronal MHD waves. We were unable to detect such fluctuations and can report only an upper limit to the rms variation of 1.6 rad/sq m. This upper limit is of the same order, but slightly larger than the values typically reported by Hollweg et al. (1982). This upper limit to the rotation measure fluctuations limits the dimensionless wave amplitude (delta B)/B in the corona to be less than 0.7. Using the number, we estimate the MHD wave flux at the coronal base to be less than 1.6 x 10(exp 5) ergs/sq cm/s. This is less than the amount of wave energy flux required by wave-driven models of the solar wind. Finally, we discuss a number of ways in which such observations could be improved in the future.
Sakurai, Takayuki↗
Modeling Meteoroid Densities for Spacecraft Risk Assessment
Densities are a key driver of risk posed to spacecraft by the meteoroid environment. MEM 3 has incorporated a density distribution that utilizes measurements of 92 events. Densities are extremely difficult to measure. Greater need than ever for high resolution meteor imagery to break degeneracies.
Ehlert, Steven↗
An Anisotropic Density Turbulence Model from the Sun to 1 au Derived from Radio Observations
Explore the source record for details and available documents.
Eduard P. Kontar↗
A Semi-Empirical Density Law for Ternary, Homogeneous PuCl 3 /HCl/H 2 O Solutions
Nuclear material operations pose unique hazards that are not encountered in other chemical, energy, or manufacturing industries. One of these hazards is the potential for a nuclear criticality accident when handling fissile isotopes such as 235 U and 239 Pu. These hazards are particularly high when fissile material is dissolved in solution as the neutron behaviors of the system can change rapidly with the physical and chemical changes accessible in solution. Current estimates of solution density used for criticality safety are outdated and hinder fissile material handling. Developing new estimates for these safety calculations requires experimental characterization and the derivation of empirical density models. We have derived a density law describing PuCl 3 /HCl/H 2 O solutions from experimental data characterizing solution density. Density data was treated using a Pitzer-derived eight-parameter equation, defining density as a function of analyte concentrations, temperature, and interactions between these variables. The model is predictive across the concentration and temperature ranges from which it was derived. The potential effects of varying oxidation states of plutonium, which are easily accessible in aqueous media, on the bulk solution density of the ternary system were also investigated. The resulting Pitzer-derived density law was applied to a nuclear criticality safety model, and the impact of the experimental characterization of solution density relative to previous estimates was demonstrated to be significant and suggest that the current approach to estimating density in nuclear criticality safety calculations may lead to overly conservative controls.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Atmospheric drag model calibrations for spacecraft lifetime prediction
Although solar activity prediction uncertainty normally dominates decay prediction error budget for near-Earth spacecraft, the effect of drag force modeling errors for given levels of solar activity needs to be considered. Two atmospheric density models, the modified Harris-Priester model and the Jacchia-Roberts model, to reproduce the decay histories of the Solar Mesosphere Explorer (SME) and Solar Maximum Mission (SMM) spacecraft in the 490- to 540-kilometer altitude range were analyzed. Historical solar activity data were used in the input to the density computations. For each spacecraft and atmospheric model, a drag scaling adjustment factor was determined for a high-solar-activity year, such that the observed annual decay in the mean semimajor axis was reproduced by an averaged variation-of-parameters (VOP) orbit propagation. The SME (SMM) calibration was performed using calendar year 1983 (1982). The resulting calibration factors differ by 20 to 40 percent from the predictions of the prelaunch ballistic coefficients. The orbit propagations for each spacecraft were extended to the middle of 1988 using the calibrated drag models. For the Jaccia-Roberts density model, the observed decay in the mean semimajor axis of SME (SMM) over the 4.5-year (5.5-year) predictive period was reproduced to within 1.5 (4.4) percent. The corresponding figure for the Harris-Priester model was 8.6 (20.6) percent. Detailed results and conclusions regarding the importance of accurate drag force modeling for lifetime predictions are presented.
Binebrink, A. L.↗
IMAGE EUV Observations and Modeling of the Plasmaspheric Density Trough Associated with the 24 May 2000 Geomagnetic Storm
The IMAGE EUV imager observed a plasmaspheric density trough in association with a geomagnetically active period on 24 May 2000. At EUV wavelengths, this density trough appeared as an Archimedes spiral extending from Earth's shadow to approximately 1800 MLT. We present an analysis of this density trough using simulated EUV images. Observational EUV images are subjected to edge analysis to establish the plasmapause L-shell and the location of the density trough in terms of L-shell, MLT extent, and radial width. The plasmaspheric density distribution is modeled using both static and dynamic models for the plasmasphere. The background plasmasphere is then numerically simulated using the 4-parameter plasmaspheric density model contained within the Global Core Plasma Model (GCPM) [Gallagher et al., 20001 and the Dynamic Global Core Plasma Model (DGCPM). Simulated EUV images of the model plasmasphere are produced once an artificial density depletion, matching the observed MLT extent and width, has been removed. Once the azimuthal extent and width of the trough have been simulated, the depth of the artificial density depletion is iteratively adjusted to produce simulated EUV images that approximate observation. The results of this analysis and discussion of possible origins for this density trough will be presented.
Adrian, M.L.↗
Molecular column densities in selected model atmospheres
Molecular column densities are presented for 35 molecules in a variety of cool stellar model atmospheres. From an examination of the predicted column densities, we draw the following conclusions: (1) OH might be visible in carbon stars which have been generated from triplet-alpha burning, but will be absent from carbon stars generated from the CNO bi-cycle; (2) the TiO/ZrO ratio shows small but interesting variations as C/O is changed and as the effective temperature is changed; (3) the column density of silicon dicarbide (SiC2) is sensitive to abundance, temperature, and gravity; hence, all relationships between the strength of SiC2 and other stellar parameters will show appreciable scatter. There is, however, a substantial luminosity effect present in the SiC2 column densities; (4) unexpectedly, SiC2 is anticorrelated with C2; (5) the presence of SiC2 in a carbon star allows us to eliminate the possibility that these stars are both 'hot' (T sub eff greater than or equal to 3000 K) and have been produced through the CNO bi-cycle (so that C/H is less than solar).
Johnson, H. R.↗
Density pedestal prediction model for tokamak plasmas
Abstract A model for the pedestal density prediction based on neutral penetration combined with pedestal transport is presented. The model is tested against a pedestal database of JET-ILW Type I ELMy H-modes showing good agreement over a wide range of parameters both in standalone modelling (using the experimental temperature profile) and in full Europed modelling that predicts both density and temperature pedestals simultaneously. The model is further tested for ASDEX Upgrade and MAST-U Type I ELMy H-modes and both are found to agree with the same model parameters as for JET-ILW. The JET-ILW experiment where the isotope of the main ion is varied in a D/T scan at constant gas rate and constant β N is successfully modelled as long as the separatrix density ( n e,sep ) and pedestal transport coefficient ratio ( D / χ ) are varied in accordance with the experimentally observed variation of n e,sep and the isotope dependence of D / χ found in gyrokinetic simulations. The predictions are found to be sensitive to n e,sep which is why the model is combined with an n e,sep model to predict the pedestal for the STEP fusion reactor.
Physics↗
An upper limit to the product of NO and O densities from 105 to 120 km
From the Ogo 6 horizon-scanning-photometer data a useful upper limit can be set to the radiance of nightglow in the O-NO afterglow continuum above 105 km. The upper limit is a factor of about 5 less than the product of observed NO densities and Jacchia (1971) O model densities.
Donahue, T. M.↗
The Long-stable Hard State of XTE J1752-223 and the Disk Truncation Dilemma
The degree to which the thin accretion disks of black hole X-ray binaries are truncated during hard spectral states remains a contentious open question in black hole astrophysics. During its singular observed outburst in 2009–2010, the black hole X-ray binary XTE J1752−223 spent ∼1 month in a long-stable hard spectral state at a luminosity of ∼0.02–0.1 L Edd . It was observed with 56 RXTE pointings during this period, with simultaneous Swift-XRT daily coverage during the first 10 days of the RXTE observations. While reflection modeling has been extensively explored in the analysis of these data, there is disagreement surrounding the geometry of the accretion disk and corona implied by the reflection features. We reexamine the combined, high signal-to-noise, simultaneous Swift and RXTE observations, and perform extensive reflection modeling with the latest relxill suite of reflection models, including newer high disk density models. We show that reflection modeling requires that the disk be within ∼5 R ISCO during the hard spectral state, while weaker constraints from the thermal disk emission imply higher truncation (Rin = 6–80 R ISCO ). We also explore more complex coronal continuum models, allowing for two Comptonization components instead of one, and show that the reflection features still require only a mildly truncated disk. Finally we present a full comparison of our results to previous constraints found from analyses of the same data set.
Accretion↗
Quasilinear modelling of collisional trapped electron modes
The simplification of collision operators is necessary for quasilinear turbulence modelling used with integrated modelling frameworks, such as the gyrokinetic code QuaLiKiz. The treatment of collisions greatly impacts the accuracy of trapped electron mode (TEM) modelling, which is necessary to predict the electron heat flux and the balance between inward and outward particle fluxes. In particular, accurate particle flux predictions are necessary to successfully model density peaking in the tokamak core. We explored two ways of improving collisional TEM model reduction for tokamak core plasmas. First, we carried out linear GENE simulations to study the complex interplay between collisions and trapped electrons. We then used these simulations to define an effective trapped fraction to characterize the collisional TEM based on two key parameters, the local inverse-aspect ratio $\epsilon$ and the collisionality $\nu ^\ast$. One aspect missing from analytical TEM research is that the collisional frequency and the bounce-transit frequency are both velocity dependent; this effective trapped fraction takes both into account. In doing so, we determined that two parameters are not enough to model the collisional TEM, as an additional third free parameter was necessary. We determined that this model, as currently formulated, is not suitable for integrated modelling purposes. Second, we directly improved QuaLiKiz's Krook operator, which relies on two free parameters. We determined that these parameters required adjustments against higher-fidelity collisional models. In order to improve density profile predictions when paired with integrated models, we refined the Krook operator by using GENE simulations as a higher-fidelity point of comparison. We then demonstrate strong improvement of density peaking predictions of QuaLiKiz within the integrated modelling framework JETTO.
fusion plasma↗
The Ionization Constants of DCO{sub 3}{sup -} and DPO{sub 4}{sup 2-} under Candu Reactor Primary Coolant Conditions by Raman Spectroscopy
The ionization constants of bicarbonate and hydrogen phosphate have been measured in light and heavy water up to 325 deg. C using Raman spectroscopy. Ionization constants in heavy water at temperatures above 100 deg. C have been measured for very few acids and bases. Together with other results, this work will be used to develop and verify models of the deuterium isotope effect on oxide solubilities in Candu reactor primary coolant. A custom-built titanium/sapphire flow cell was paired with a Horiba Jobin Yvon HR800 LabRAM system to collect Raman spectra of aqueous solutions under Candu primary coolant temperatures. The temperature-controlled cell is made of materials that are relatively inert under the extreme experimental conditions required for hydrothermal studies. Raman spectra were collected with detector polarizations parallel and perpendicular to the laser polarization. These were subtracted and corrected to obtain the reduced isotropic spectrum, which contains only symmetric vibrations, has a flat baseline, and has peak areas proportional to species concentration. Vibrational modes involving deuterium are shifted to lower wavenumbers in heavy water due to the increased mass of deuterium over hydrogen. The speciation between the two solvents is also measurably different. The relative concentration of the acidic species in solution increases with temperature, making its peaks easier to fit at high temperatures. The Raman band positions shift to lower wavenumbers with increasing temperature because the hydrogen bonding in bulk water begins to break down, which strengthens hydrogen bonding to the ions. The basic equilibrium constants were determined from the concentration of each species in solution combined with an activity coefficient model. A simplified form of the 'density' model was then fitted to the data. These fit results were combined with literature values of pK{sub w} in light and heavy water to determine the pK{sub a} values at saturation vapor pressure. The experimental results show excellent agreement with known literature values in light water where they exist at lower temperatures. These equilibrium constants are the first to be reported for both chemical systems in heavy water above 25 deg. C. This work extends the equilibrium constants in H{sub 2}O: - For HCO{sub 3}{sup -} from 250 deg. C to 325 deg. C; - For HPO{sub 4}{sup 2-} from 50 deg. C to 300 deg. C. These are the first ever ionization constants in D{sub 2}O for DPO{sub 4}{sup 2-} and the first values above 25 deg. C for DCO{sub 3}{sup -}. These results will be used to develop predictive models for the deuterium isotope effect on activated corrosion product transport under Candu nuclear reactor primary coolant conditions.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Radar and photometric measurements of an intense type A red aurora
On the evening of March 5, 1981, an intense, type A red aurora appeared over southern Alaska. Radar and photometric measurements were made of the aurora from the Chatanika radar site. The line of sight intensity of the 630.0-nm emissions exceeded 150 kR and was accompanied by enhanced emissions at 486.1 and 427.8 nm. The Chatanika radar measured electron densities of 10 to the 6th per cu cm and electron temperatures of 6000 K at an altitude of 400 km and an invariant latitude of 59 deg in association with the aurora. Comparison of optical and radar measurements indicated that the 630.0-nm emissions were produced to a large degree by thermal excitation of O(1D) in the region of high electron temperatures and densities. Model calculations indicate that the observed density and temperature enhancements and the related optical emissions were the results of a relatively short duration (5-10 min) pulse of precipitating, low-energy (about 30 eV) electrons. Whereas conventional stable auroral red arcs are associated with a gradual decrease in ring current energy density during the recovery phase of a magnetic storm, the type A red aurora may be produced by impulsive ring current energy loss during the main phase.
Robinson, R. M.↗