Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data processing and logging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Locating subsurface gravel with thermal imagery

A method was discussed for using 6 band thermal imagery to locate subsurface gravel deposits in vegetated areas. Geologic history is reviewed to select potential areas of study. An overflight was made using a thermal scanner. The data were processed with a computerized system to delineate areas showing a quartz signature radiated by a gravel deposit. The method was developed during a search for gravel on National Forest land in Louisiana. Processed data from thermal imagery was compared with known gravel deposits and exploratory drill hole logs. A high correlation was noted for a wide range of deposits, from commercial pits to trace deposits only a foot thick. Overburden at these sites varied from zero to sixty feet, near the maximum annual penetration by the thermal wave. It was concluded that the method can be used to locate buried gravel deposits and that more time and effort are needed to verify the usefulness for developing gravel pits adjacent to proposed construction sites.

Scholen, Douglas E.↗

Measurement of wind near the surface

A survey is presented of instrumentation suitable for measurement of wind near the surface of the earth by using in-situ techniques and further restricted to sensors that are operational. In this case, a sensor is deemed to be operational if it is commercially available. There is no discussion here of the systems that might be used to acquire, process, display, and store the sensor data. It is assumed that some sort of automatic data logging equipment would be used. Without special requirements such as need for high frequency response, low power consumption, etc., this treatment must be quite general and provides little detail. Also, without special restrictions, emphasis must be placed on conventional sensors that provide the bulk of wind data today.

Brock, Fred V.↗

Nevada National Security Site (NNSS) Environmental Remediation Using EPA's Model Evaluation Guidance to Move to Closure - 15588

The National Nuclear Security Administration Nevada Field Office (NNSA/NFO) has adapted the Environmental Protection Agency's guidance on environmental model evaluation as a framework for evaluating corrective action investigation models. Model evaluation is an important confidence building activity, which is needed to support closure of the Nevada National Security Site (NNSS) Corrective Action Units (CAUs) associated with underground nuclear testing. Through this process, site-investigation models of groundwater flow and contaminant transport are reviewed and compared to new site-specific data to determine if the results can be used to support regulatory decisions required for closure and to achieve NNSA/NFO site management objectives. The regulatory decisions include identifying and establishing CAU regulatory boundaries; identifying institutional controls, including use-restriction boundaries; and developing a long-term closure monitoring program. A successful case study from Frenchman Flat, Nevada is used to illustrate the model evaluation process. Groundwater flow and transport from two of the 10 underground nuclear tests in Frenchman Flat had the largest potential for contaminating groundwater, and were selected for evaluation. Wells were drilled, logged, hydraulically tested, sampled, and analyzed for radionuclides and the data was evaluated with respect to previous site conceptualization and numerical model results. The approach and results of this process as applied to the PIN STRIPE test and how it helped build confidence to close the Frenchman Flat CAU is described in this case study. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

EGS Collab Experiment 1: Wireline Geophysical Well Logs

This is the full wireline geophysical datasets for characterization of the EGS Collab Experiment #1 testbed on the 4850 level. A metadata file is included within the dataset explaining the logs, fracture picks, etc. Eight boreholes were drilled for this testbed and each one was logged with north seeking gyro, optical televiewer, acoustic televiewer, fluid temperature conductivity, resistivity and gamma, and full waveform sonic. In these folders are the processed results as text, csv, and pdf files, along with the raw data which will need to be read using WellCAD software.

15 GEOTHERMAL ENERGY↗

A fast partial Fourier transform (FPFT) for data compression and filtering.

A discrete Fourier transform (DFT) or the closely related discrete cosine transform (DCT) is often employed as part of a data compression scheme. This paper presents a fast partial Fourier transform (FPFT) algorithm that is useful for calculating a subset of M Fourier transform coefficients for a data set comprised of N points (M < N). This algorithm reduces to the standard DFT when M = 1 and it reduces to the radix-2, decimation-in-time FFT when M = N and N is a power of 2. The DFT requires on the order of MN complex floating point multiplications to calculate M coefficients for N data points, a complete FFT requires on the order of (N/2)log{sub 2}N multiplications independent of M, and the new FPFT algorithm requires on the order of (N/2)log{sub 2}M + N multiplications. The FPFT algorithm introduced in this paper could be readily adapted to parallel processing. In addition to data compression, the FPFT algorithm described in this paper might be useful for very narrow band filter operations that pass only a small number of non-zero frequency coefficients such that M << N.

99 GENERAL AND MISCELLANEOUS↗

UH-60A Airloads Flight Test Program: Data Counter 9017

Aeromechanics Branch interns at Ames Research Center have been directly contributing to the data quality analysis and reporting of the UH-60A Airloads Flight Test Program for many years. In chronological order (together with the semester and year): Caroline Edwards (Summer 2011); Joni DeGuzman and Carson Turner (Fall 2011); Eric Fritz (Spring 2012); Connor Beierle (Fall 2012); Christopher Olinger (Spring and Summer 2013); Needa Lin, Anatole Levkoff, Maxwell Loebig, Jose Orejel, Megan Prout, and Albert Sue (Summer 2014); Jared Archey (Fall 2014); Alexander Crone (Summer 2015); Jeffrey Diament, Austin Djang, and Jessica Swan (Summer 2016); Makenzie Allen (Summer 2017); Colin Lauzon (Fall 2017); Eric Gilkey (Spring 2018); and Nicholas Masso (Summer 2019). These interns have spent their internships reviewing flight logs, extracting the data out of TRENDS, formatting the data into spreadsheets, writing code to automate the process, and plotting results. Without their efforts, much of the work would be unfinished. The authors appreciate the achievements of the UH-60A Airloads Working Group during its 20-year lifetime, as well the contributions of Randy Peterson, Tom Norman, and William Warmbrodt to the data processing and assistance with the report preparation. Lastly, this report is dedicated to William Bousman for his efforts preceding, during, and subsequent to the UH-60A Airloads Flight Test Program.

Kufeld, Robert M.↗

Equipment Testing Environment (ETE) Process Specification

This document is intended to be utilized with the Equipment Test Environment being developed to provide a standard process by which the ETE can be validated. The ETE is developed with the intent of establishing cyber intrusion, data collection and through automation provide objective goals that provide repeatability. This testing process is being developed to interface with the Technical Area V physical protection system. The document will overview the testing structure, interfaces, device and network logging and data capture. Additionally, it will cover the testing procedure, criteria and constraints necessary to properly capture data and logs and record them for experimental data capture and analysis.

97 MATHEMATICS AND COMPUTING↗

CSEM Fluid Monitoring Methodology Using Real Data Examples

Conference presentation at International Meeting for Applied Geoscience & Energy (IMAGE), Houston, Texas, August 28 – September 1, 2023. Using field data from hydrocarbon and CO 2 applications, we illustrate the importance of a workflow and adaption to the target on hand. Verifying the geophysical acquisition and processing steps with 3D modeling and checking them against a 3D anisotropic log-derived model maintains confidence in the workflow and minimizes the influence on the data. This allows us to predict data validity and to certify the data with respect to the borehole logs.

20 FOSSIL-FUELED POWER PLANTS↗

Zero Resistance Ammetry (ZRA) Measurements of Sediment Electrochemical Gradients, Old Woman Creek, Ohio, USA, June–November 2022

This dataset contains raw and processed zero resistance ammetry (ZRA) measurements collected from wetland sediments at Old Woman Creek, a freshwater estuary on Lake Erie, Ohio, USA, between June and November 2022. Measurements were obtained using a vertically deployed electrode array positioned at multiple depths within the sediment profile to capture electrochemical gradients associated with microbial activity and sediment geochemistry. The raw dataset consists of parsed instrument log files containing timestamps, electrode pair identifiers, and measured electrical potential (mV). The processed dataset includes standardized and quality-controlled values with instrument saturation limits removed and timestamps converted to ISO 8601 format. Electrode line identifiers were mapped to physical depths, enabling interpretation of depth-resolved electrochemical gradients. Instrument saturation values (−2048, −2047, 2047, and 2048 mV) were identified as measurement limits and excluded from quantitative analyses. All data parsing, processing, and quality control steps are documented in an accompanying R Markdown script, ensuring full reproducibility from raw instrument logs to final datasets.

EARTH SCIENCE > AGRICULTURE > SOILS > ELECTRICAL C↗

Software reliability report

There are many software reliability models which try to predict future performance of software based on data generated by the debugging process. Unfortunately, the models appear to be unable to account for the random nature of the data. If the same code is debugged multiple times and one of the models is used to make predictions, intolerable variance is observed in the resulting reliability predictions. It is believed that data replication can remove this variance in lab type situations and that it is less than scientific to talk about validating a software reliability model without considering replication. It is also believed that data replication may prove to be cost effective in the real world, thus the research centered on verification of the need for replication and on methodologies for generating replicated data in a cost effective manner. The context of the debugging graph was pursued by simulation and experimentation. Simulation was done for the Basic model and the Log-Poisson model. Reasonable values of the parameters were assigned and used to generate simulated data which is then processed by the models in order to determine limitations on their accuracy. These experiments exploit the existing software and program specimens which are in AIR-LAB to measure the performance of reliability models.

Wilson, Larry↗

Coupling fracture facies with in-situ permeability measurements to generate stochastic simulations of tight carbonate aquifer properties: Example from the Lower Cretaceous aquifer, Northern Provence, SE France

The relationships between fracture facies and permeability distribution have been explored using a well-constrained 3D implicit structural model of hemipelagic low porosity/low permeability carbonate from the Northern Provence region, SE France. Fracture and permeability facies were determined using an extensive dataset of 99 hydrogeological wells. Data processing was undertaken using a step-by-step approach, involving: (i) identification of the fracture facies based on well logs detailing structure and stratigraphy; (ii) determination of permeability facies from the a priori correlation between the dimension of the hydraulic radius of influence (deduced from slug test analyses) and the type of reservoir heterogeneity (fissure, fracture, fault zone, etc.); (iii) three dimensional plot of fracture and permeability facies in the geological model using a variographic analysis of data. Thirty-three sequential indicator simulations (SIS) based on geostatistic analyses were realised on both fracture and permeability facies. Finally, a connectivity algorithm was developed to compute the probability of connection between selected infiltration areas and the major aquifer springs via moderate- to high-permeability geological bodies. Key results are: (i) fault zones have a greater role in controlling permeability facies distribution than on fracture facies repartition; (ii) there is little correlation between permeability and fracture facies distributions; (iii) connectivity results highlight the compartmentalisation of aquifers in the Cadarache area, the extensions of permeable geological bodies being limited by the N130 faults.

58 GEOSCIENCES↗

MASK4 Test Campaign for Sandia WaveBot Device

This data and report details the findings from a wave tank test focused on production of useful work of a wave energy converter (WEC) device. The experimental system and test were specifically designed to validate models for power transmission throughout the WEC system. Additionally, the validity of co-design informed changes to the power take-off (PTO) were assessed and shown to provide the expected improvements in system performance. These data describe the "MASK4" wave tank test of the Sandia WaveBot device. The WaveBot device has been tested a number of times in different permutations at the US Navy's Maneuvering and Sea Keeping (MASK) basin. Each test in this series is referred to as MASK1, MASK2, etc. The WaveBot device was first tested in one degree of freedom (heave) in 2016. This MASK1 test focused primarily on system identification and modeling. After MASK1, major modifications were performed to improve the overall real-time control and measurement system, improve the heave drive train, and add surge and pitch degrees of freedom. The second set of testing, which was broken up in to two stages: MASK2A and MASK2B, focused on bench testing and closed-loop control performance as well as nonlinear modeling. MASK3 then focused on multi-input, multi-output modeling and control for maximization of electrical power. The attached report presents the results from MASK4, which focuses on detailed modeling of the power conversion chain and validation co-design principles by way of the introduction of a magnetic spring. The test log, report, and data from the MASK4 test of the WaveBot augmented with a tunable magnetic spring. Processing codes can be found at the Github link below.

16 TIDAL AND WAVE POWER↗

Extraction Of Emissivities From Thermal Infrared Spectra

Report presents evaluation of two techniques for processing multispectral data. One technique for extraction of emissivity data called "model emittance calculation." Other technique called "thermal log residuals."

Hook, Simon J.↗

Low-Cost, User-Friendly, Rapid Analysis of Dynamic Data System Established

An issue of primary importance to the development of new jet and certain other airbreathing combined-cycle powered aircraft is the advancement of airframe-integrated propulsion technologies. Namely, engine inlets and their systems and subsystems are required to capture, convert, and deliver the atmospheric airflow demanded by such engines across their operating envelope in a form that can be used to provide efficient, stable thrust. This must be done while also minimizing aircraft drag and weight. Revolutionary inlet designs aided by new technologies are needed to enable new missions. An unwanted byproduct of pursuing these inlet technologies is increased time-variant airflow distortion. Such distortions reduce propulsion system stability, performance, operability, and life. To countermand these limitations and fully evaluate the resulting configurations, best practices dictate that this distortion be experimentally measured at large scale and analyzed. The required measurements consist of those made by an array of high-response pressure transducers located in the flow field at the aerodynamic interface plane (AIP) between the inlet and engine. Although the acquisition of the necessary pitot-pressure time histories is relatively straight-forward, until recent years, the analysis has proved to be very time-consuming, tedious, and expensive. To transform the analysis of these data into a tractable and timely proposition, researchers at the NASA Glenn Research Center created and established the Rapid Analysis of Dynamic Data (RADD) system. The system provides complete, near real-time analysis of time-varying inlet airflow distortion datasets with report quality output. This fully digital approach employs Institute of Electrical and Electronics Engineers (IEEE) binary data file format standardization to establish data-acquisition-system-independent processing on low cost personal computers. Features include invalid instrumentation code-out, logging, and multiple replacement schemes as needed for each channel of instrumentation. The AIP pressure distribution can be interpolated to simulate measurements by alternate AIP probe arrays, if desired. In addition, the RADD system provides for the application of filters that can be used to focus the analysis on the frequency range of interest.

Arend, David J.↗

Deep Space Network equipment performance, reliability, and operations management information system

The Deep Space Mission System (DSMS) Operations Program Office and the DeepSpace Network (DSN) facilities utilize the Discrepancy Reporting Management System (DRMS) to collect, process, communicate and manage data discrepancies, equipment resets, physical equipment status, and to maintain an internal Station Log. A collaborative effort development between JPL and the Canberra Deep Space Communication Complex delivered a system to support DSN Operations.

discrepancy reporting DSN operations web-based too↗

A Case Study of Modern PLC and LabVIEW Controls: Power Supply Controls for the ORNL ITER ECH Test Stand

Power Supply Controls are being developed at Oak Ridge National Laboratory (ORNL) to test transmission line components of the Electron Cyclotron Heating (ECH) system, with a focus on gyrotrons and waveguides, in support of the International Thermonuclear Experimental Reactor (ITER). The control is performed by several Programmable Logic Controllers (PLC s) located near the different equipment. A technique of Supervisory Control and Data Acquisition (SCADA) is presented to monitor, control, and log actions of the PLC s on a PC through use of Allen Bradley s Remote I/O communication interface coupled with an Open Process Control/Object Linking and Embedding [OLE] for Process Control (OPC) Server/Client architecture. The OPC data is then linked to a National Instruments (NI) LabVIEW system for monitoring and control. Details of the architecture and insight into applicability to other systems are presented in the rest of this paper. Future integration with an EPICS (Experimental Physics Industrial Control System) based mini-CODAC (Control, Data Access and Communication) SCADA system is under consideration, and integration considerations will be briefly introduced.

ITER↗

A Scientific Data Provenance API for Distributed Applications

Data provenance has been an active area of research as a means to standardize how the origin of data, process event history, and what or who was responsible for influencing results is explained. There are two approaches to capture provenance information. The first approach is to collect observed evidence produced by an executing application using log files, event listeners, and temporary files that are used by the application or application developer. The provenance translated from these observations is an interpretation of the provided evidence. The second approach is called disclosed because the application provides a firsthand account of the provenance based on the anticipated questions on data flow, process flow, and responsible agents. Most observed provenance collection systems collect lot of provenance information during an application run or workflow execution. The common trend in capturing provenance is to collect all possible information, then attempt to find relevant information, which is not efficient. Existing disclosed provenance system APIs do not work well in distributed environment and have trouble finding where to fit the individual pieces of provenance information. This work focuses on determining more reliable solutions for provenance capture. As part of the Integrated End-to-end Performance Prediction and Diagnosis for Extreme Scientific Workflows (IPPD) project, an API was developed, called Producer API (PAPI), which can disclose application targeted provenance, designed to work in distributed environments by means of unique object identification methods. The provenance disclosure approach used adds additional metadata to the provenance information to uniquely identify the pieces and connect them together. PAPI uses a common provenance model to support this provenance integration across disclosure sources. The API also provides the flexibility to let the user decide what to do with the collected provenance. The collected provenance can be sent to a triple store using REST services or it can be logged to a file.

Raju, Bibi↗

Darshan for HEP applications

Modern HEP workflows must manage increasingly large and complex data collections. HPC facilities may be employed to help meet these workflows’ growing data processing needs. However, a better understanding of the I/O patterns and underlying bottlenecks of these workflows is necessary to meet the performance expectations of HPC systems.Darshan is a lightweight I/O characterization tool that captures concise views of HPC application I/O behavior. It intercepts application I/O calls at runtime, records file access statistics for each process, and generates log files detailing application I/O access patterns.Typical HEP workflows include event generation, detector simulation, event reconstruction, and subsequent analysis stages. A study of the I/O behavior of the ATLAS simulation and filtering stage, and the CMS simulation workflow using Darshan is presented, including insights into the I/O operations and data access size.

Wang, Rui↗