Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data amplification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Development of a Radiation-Tolerant Front End Digitizer

High-radiation and high-temperature environments represent notoriously detrimental conditions for electronics. Yet sensors and instrumentation are critically important for the safe operation of nuclear reactors and for the validity of the scientific experiments conducted within them. Traditionally, sensors in such extreme environments operate with few active components, resulting in small signals (mV–V, nA–µA range) that must be transmitted through long cable runs before digitization by sensitive data acquisition systems located in clean, less-harsh environments. Long cables are prone to picking up noise through electromagnetic interference and distortion caused by their parasitic impedances, resulting in signal degradation. The Front End Digitizer (FREND) system described and demonstrated herein seeks to address these issues by enabling the placement of a radiation-resistant analog front end within reactor containment, or other high-radiation environments. FREND will enable early signal pre-amplification, digitization, and optical encoding within the high-radiation field to transmit sensor signals over an optical fiber to the non-nuclear environment of an instrument room. Early signal pre-amplification and digitization maintain signal integrity, whereas optical transmission renders the system blind to induced electromagnetic noise over the long cable runs. This report describes the FREND initial prototype, which can multiplex and optically encode data from up to four sensor inputs, though, in principle, this can be extended to any number of sensor inputs. The end result is an extremely flexible, high-fidelity system.

42 ENGINEERING↗

As above, not so below: Ion fractionation in planetary analog ices

The geophysical evolution and astrobiological potential of ocean worlds are indelibly linked to the chemical compositions of their oceans and ice shells. In the absence of direct measurements, empirical estimates of subsurface ocean compositions have relied on the assumption that the ionic compositions of ice shell surfaces are representative of their underlying ocean compositions. Here, we present experimental results demonstrating that ion fractionation—the differential entrainment of ion species in forming ices—is likely a prevalent process on ocean worlds, suggesting that planetary ice shell compositions do not directly reflect their underlying ocean compositions. We measure in-ice depletions and amplifications of relative ion concentrations ranging between −40 and +77%, compared to the parent fluid composition. Although this may complicate the interpretation of spacecraft data, ion fractionation provides a mechanism for generating compositionally diverse ices that could help explain the geological complexity of planetary ice shells.

58 GEOSCIENCES↗

Multi-Gene Detection and Identification of Mosquito-Borne RNA Viruses Using an Oligonucleotide Microarray

Background: Arthropod-borne viruses are important emerging pathogens world-wide. Viruses transmitted by mosquitoes, such as dengue, yellow fever, and Japanese encephalitis viruses, infect hundreds of millions of people and animals each year. Global surveillance of these viruses in mosquito vectors using molecular based assays is critical for prevention and control of the associated diseases. Here, we report an oligonucleotide DNA microarray design, termed ArboChip5.1, for multi-gene detection and identification of mosquito-borne RNA viruses from the genera Flavivirus (family Flaviviridae), Alphavirus (Togaviridae), Orthobunyavirus (Bunyaviridae), and Phlebovirus (Bunyaviridae). Methodology/Principal Findings: The assay utilizes targeted PCR amplification of three genes from each virus genus for electrochemical detection on a portable, field-tested microarray platform. Fifty-two viruses propagated in cell-culture were used to evaluate the specificity of the PCR primer sets and the ArboChip5.1 microarray capture probes. The microarray detected all of the tested viruses and differentiated between many closely related viruses such as members of the dengue, Japanese encephalitis, and Semliki Forest virus clades. Laboratory infected mosquitoes were used to simulate field samples and to determine the limits of detection. Additionally, we identified dengue virus type 3, Japanese encephalitis virus, Tembusu virus, Culex flavivirus, and a Quang Binh-like virus from mosquitoes collected in Thailand in 2011 and 2012. Conclusions/Significance: We demonstrated that the described assay can be utilized in a comprehensive field surveillance program by the broad-range amplification and specific identification of arboviruses from infected mosquitoes. Furthermore, the microarray platform can be deployed in the field and viral RNA extraction to data analysis can occur in as little as 12 h. The information derived from the ArboChip5.1 microarray can help to establish public health priorities, detect disease outbreaks, and evaluate control programs.

59 BASIC BIOLOGICAL SCIENCES↗

Dataset for 'Ombadi et al. (2023). A warming-induced reduction in snow fraction amplifies rainfall extremes, Nature'

This package contains the main codes, sample input data and main result files to reproduce the analysis and results presented in the article: “Ombadi et al. (2023), A warming-induced reduction in snow fraction amplifies rainfall extremes, Nature”. The folder consists of the following: (1) “Raw data”: a folder that contains sample input data which is used in some of the codes for demonstration purposes. It also contains data that was not pre-processed such as Elevation data; (2) “Results”: this folder contains files of the main results presented in the paper including: “Annual-Max-Series”, “Change-rainfall-extremes”, “Change-snow-fraction”, “Warming levels_By scenario_model_year” and “Masks”. Description of these folders is detailed in the "Readme.rtf" file; (3) Python jupyter notebooks (Extract_Annual Max Series (AMS).ipynb, Elevation-dependent amplification of rainfall extremes.ipynb, Sensitivity_to_global_warming.ipynb) demonstrate the main steps of analysis. Further description of those notebooks is provided in the "Readme.rtf" file; (4) R code for extreme value analysis (Extreme_Value_Analysis.R). The sample and pre-processed dataset in "Raw data" is obtained from publicly available repositories of CMIP6 and ERA5 datasets; see Methods for more detail. This research was supported by Office of Science, Office of Biological and Environmental Research of the US Department of Energy under contract no. DE-AC02-05CH11231 for the CASCADE Scientific Focus (funded by the Regional and Global Model Analysis Program area within the Earth and Environmental Systems Modeling Program) and the iNAIADS Early Career Research Project (funded by the Environmental Systems Science program).

54 ENVIRONMENTAL SCIENCES↗

Bessel spatial profile of a soft x-ray laser beam

We report far-field profile measurements of an optical-field-ionized high-order harmonic-seeded soft x-ray laser. We show that the beam transverse profile can be controlled between a regular Gaussian shape and a Bessel profile exhibiting several rings via the infrared laser pump intensity. These experimental data are supported by a complete numerical modeling including a two-dimensional plasma amplifier simulation and a two-level soft x-ray amplification using a Maxwell-Bloch treatment. This model takes into account the experimental high-order harmonic wavefront and intensity before it is numerically amplified.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flat gain C + L band using optical amplifiers for 200 × 14 Gbps DWDM system

This paper has shown the analysis of 200 channels dense wavelength division multiplexing (DWDM) system with the data rate of 14 Gbps for attaining the flat gain for the channel spectrum from 1520 to 1640 nm. Analysis has also extended with the power amplification of erbium–ytterbium co-doped optical amplifier (EYBCDOWA) and Raman optical amplifier for the transmission distance of 120 km to mitigate the effect of crosstalk and bit error rate (BER). Final analysis has also recommended that this proposed system is capable to deliver the flat gain of 19.5 dB with minor variation of 0.95 dB to maintain the acceptable dense communication for long distance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Contribution of urbanization to the increase of extreme heat events in an urban agglomeration in east China

Abstract The urban agglomeration of Yangtze River Delta (YRD) is emblematic of China's rapid urbanization during the past decades. Based on homogenized daily maximum and minimum temperature data, the contributions of urbanization to trends of summer extreme temperature indices (ETIs) in YRD are evaluated. Dynamically classifying the observational stations into urban and rural, this study presents unexplored changes in temperature extremes during the past four decades in YRD and quantifies the amplification of the positive trends in ETIs by the urban heat island effect. Overall, urbanization contributes to more than one third of the increase of intensity of extreme heat events in the region, which is comparable to the contribution of greenhouse gases. Compared to rural stations, more notable shifts to the right in the probability distribution of temperature and ETIs are found in urban stations. The rapid urbanization in YRD has resulted in large increases in the risk of heat extremes.

Yang, Xuchao↗

Cellular and Tumor Radiosensitivity is Correlated to Epidermal Growth Factor Receptor Protein Expression Level in Tumors Without EGFR Amplification;Epidermal growth factor receptor; Radiotherapy; Squamous cell carcinoma; Biomarker; Local tumor control

Purpose: There is conflicting evidence for whether the expression of epidermal growth factor receptor in human tumors can be used as a marker of radioresponse. Therefore, this association was studied in a systematic manner using squamous cell carcinoma (SCC) cell lines grown as cell cultures and xenografts. Methods and Materials: The study was performed with 24 tumor cell lines of different tumor types, including 10 SCC lines, which were also investigated as xenografts on nude mice. Egfr gene dose and the length of CA-repeats in intron 1 were determined by polymerase chain reaction, protein expression in vitro by Western blot and in vivo by enzyme-linked immunosorbent assay, and radiosensitivity in vitro by colony formation. Data were correlated with previously published tumor control dose 50% data after fractionated irradiation of xenografts of the 10 SCC. Results: EGFR protein expression varies considerably, with most tumor cell lines showing moderate and only few showing pronounced upregulation. EGFR upregulation could only be attributed to massive gene amplification in the latter. In the case of little or no amplification, in vitro EGFR expression correlated with both cellular and tumor radioresponse. In vivo EGFR expression did not show this correlation. Conclusions: Local tumor control after the fractionated irradiation of tumors with little or no gene amplification seems to be dependent on in vitro EGFR via its effect on cellular radiosensitivity.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

CMB dipole asymmetry from a fast roll phase

The observed CMB (cosmic microwave background) dipole asymmetry cannot be explained by a single field model of inflation - it inevitably requires more than one field where one of the fields is responsible for amplifying the super-Hubble fluctuations beyond the pivot scale. Furthermore the current constraints on f{sub NL} and τ{sub NL} require that such an amplification cannot produce large non-Gaussianity. In this paper we propose a model to explain this dipole asymmetry from a spectator field, which is responsible for generating all the curvature perturbations, but has a temporary fast roll phase before the Hubble exit of the pivot scale. The current data prefers spectator scenario because it leaves no isocurvature perturbations. The spectator model will also satisfy the well-known constraints arising from quasars, and the quadrupole and octupole of the CMB.

79 ASTRONOMY AND ASTROPHYSICS↗

Exosomes derived from human umbilical vein endothelial cells promote neural stem cell expansion while maintain their stemness in culture

The neural stem cell (NSC) niche in subventricular zone (SVZ) of adult mammalian brain contains dense vascular plexus, where endothelial cells (ECs) regulate NSCs by releasing plenty of angiocrine factors. However, the role of ECs-derived exosomes, a novel type of mediators of intercellular communications, in the regulation of NSCs remains unclear. In the current study, primary NSCs isolated from embryonic mouse brains form more neurospheres when cultured in the presence of human umbilical vein endothelial cells (HUVECs). The supportive role of ECs in the coculture was significantly attenuated when GW4869, a blocker of exosome formation, was included, suggesting that HUVECs-derived exosomes played a significant role in supporting NSCs. In order to investigate the role of ECs-derived exosomes on NSCs, we collected exosomes from HUVECs. We found that HUVECs-derived exosomes could significantly promote the formation of neurospheres by primary murine NSCs. EdU incorporation and TUNEL assays indicated that the proliferation of NSCs increased while apoptosis decreased when cultured in the presence of HUVECs-derived exosomes. NSCs incubated with the HUVECs-derived exosomes maintained their potential of multi-lineage differentiation potentials. The expression of stemness-related genes was up-regulated. These data suggested that ECs-derived exosomes could play an importantly role in NSC niche, and they might be used as a reagent for ex vivo NSC amplification for medical application.

60 APPLIED LIFE SCIENCES↗

A hybrid DCF/FBG scheme for dispersion compensation over a 300 km SMF

In this work, the efficient restoration of a dissipated signal over a 300 km long-haul optical fiber is investigated. A hybrid system is proposed including a dispersion compensation fiber (DCF) and a fiber Bragg grating (FBG). Two 150 km standard single mode fibers with a chromatic dispersion of 17 ps/nm km are used in the simulation. Sufficient optical amplification power is supplied using an erbium-doped fiber amplifier to overcome the signal attenuation down the link, yet the signal is totally distorted. The only major reason left interpreting the total data loss would be the chromatic dispersion (CD). A DCF and a-tanh-apodized-linearly-chirped fiber Bragg grating (ACFBG) are implemented individually in a symmetric or a distributed setting in an attempt to compensate for the CD that led mainly to the signal degradation. The proposed hybrid scheme is then tested in a pre, post, symmetric and distributed installations. Several lengths of DCFs and ACFBGs at various parameters are examined. A comparison between the mentioned schemes is performed, seeking the most remarkable, resilient, and cost-effective technique.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reaching a burning plasma and ignition using smaller capsules/ Hohlraums , higher radiation temperatures, and thicker ablator/ice on the national ignition facility

In indirect-drive implosions, the final core hot spot energy and pressure and, hence, neutron yield attainable in 1D increase with increasing laser peak power and, hence, radiation drive temperature at the fixed capsule and Hohlraum size. Here we present simple analytic scalings validated by 1D simulations that quantify the improvement in performance and use this to explain existing data and simulation trends. Extrapolating to the 500 TW National Ignition Facility peak power limit in a low gas-fill 5.4 mm diameter Hohlraum based on existing high adiabat implosion data at 400 TW, 1.3 MJ and 1 × 10 16 yield, we find that a 2–3 × 10 17 yield (0.5–0.7 MJ) is plausible using only 1.8 MJ of laser energy. Based on existing data varying deuterium–tritium (DT) fuel thickness and dopant areal density, further improvements should be possible by increasing DT fuel areal density, and hence confinement time and yield amplification.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impact of plasma response on plasma displacements in DIII-D during application of external 3D perturbations

The effects of applied non-axisymmetric resonant magnetic perturbations (RMPs) are predicted without and with self-consistent plasma response by modeling of the magnetic field structure and two-fluid MHD simulations, respectively. A synthetic diagnostic is used to simulate soft X-ray (SXR) emission within the steep gradient region of the pedestal, 0.98 > ψ > 0.94. The entire pedestal and edge region is characterized by large changes in plasma rotation and current density. Those parameters are expected to strongly affect the plasma response to RMPs. The M3D-C1 code takes into account this response self-consistently. The plasma response is investigated in detail and used in the forward modeling of the simulated local SXR emission, within the framework of the synthetic diagnostic. The resulting synthetic emission is compared to measured SXR data. The latter clearly shows helical m = 11 ± 1 displacements around the 11/3 rational surface of sizes up to 5 cm, which change with the poloidal angle. The synthetic emission with plasma response is used to explain the nature of the measured displacements. Different approaches are tested. One approach is based on the magnetic field structure to simulate local emission, which shows additional structures at the separatrix, that are caused by the lobes. Especially without plasma response, almost only separatrix structures are generated while no significant displacements are found further inside. Another approach to model local emission uses the fluid quantities electron density and temperature, as calculated by M3D-C1. Compared to the previous approach, based on the magnetic field structure, the emission simulated by the fluid approach with plasma response shows better agreement with the measured SXR data. To be specific, it has comparable displacements in the steep gradient region and no lobe structures at all. The helical displacements around the 11/3 surface are identified to be directly related to the kink response, caused by non-resonant amplification of various poloidal RMP modes due to plasma response. Regarding the latter, the role of different plasma parameters is investigated, but it appears that the electron rotation plays a key role in the formation of screening and resonant amplification, while the kinking appears to be sensitive to the edge current density. As a result, it is also hypothesised that the strength of the kink response is also correlated to edge-localized-mode (ELM) stability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic field production via the Weibel instability in interpenetrating plasma flows

Here, many astrophysical systems are effectively “collisionless,” that is, the mean free path for collisions between particles is much longer than the size of the system. The absence of particle collisions does not preclude shock formation, however, as shocks can be the result of plasma instabilities that generate and amplify electromagnetic fields. The magnetic fields required for shock formation may either be initially present, for example, in supernova remnants or young galaxies, or they may be self-generated in systems such as gamma-ray bursts (GRBs). In the case of GRB outflows, the Weibel instability is a candidate mechanism for the generation of sufficiently strong magnetic fields to produce shocks. In experiments on the OMEGA Laser, we have demonstrated a quasi-collisionless system that is optimized for the study of the non-linear phase of Weibel instability growth. Using a proton probe to directly image electromagnetic fields, we measure Weibel-generated magnetic fields that grow in opposing, initially unmagnetized plasma flows. The collisionality of the system is determined from coherent Thomson scattering measurements, and the data are compared to similar measurements of a fully collisionless system. The strong, persistent Weibel growth observed here serves as a diagnostic for exploring large-scale magnetic field amplification and the microphysics present in the collisional–collisionless transition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

JGI Genomic Single-cell Assembly Workflow

JIGSAW is a software package disigned to quality control and assemble genomic DNA sequences from single-cell bacterial and archaeal genomes. Amplification of singel-cell genomes using multiple displacement amplification technology presents challenges that magnify the amount of contaminants in the sample and produce non uniform depth of sequence coverage. these factors pose problems whan assembling the genomic data using currently availible short read assembles. The software addresses these problems by removing contaminants and normalizing the sequence read coverage prior to assemble. A hybrid assembly approach using two different open source genome assembly tools is then applied to piece together the DNA fragments. Additional reporting of QC metrics for the input sample and the genome assembly is provided for further analysis.

Trong, S.↗

Design and development of digital seismic amplifier recorder

A digital seismic recording is a recording technique of seismic data in digital systems. This method is more convenient because it is more accurate than other methods of seismic recorders. To improve the quality of the results of seismic measurements, the signal needs to be amplified to obtain better subsurface images. The purpose of this study is to improve the accuracy of measurement by amplifying the input signal. We use seismic sensors/geophones with a frequency of 4.5 Hz. The signal is amplified by means of 12 units of non-inverting amplifier. The non-inverting amplifier using IC 741 with the resistor values 1KΩ and 1MΩ. The amplification results were 1,000 times. The results of signal amplification converted into digital by using the Analog Digital Converter (ADC). Quantitative analysis in this study was performed using the software Lab VIEW 8.6. The Lab VIEW 8.6 program was used to control the ADC. The results of qualitative analysis showed that the seismic conditioning can produce a large output, so that the data obtained is better than conventional data. This application can be used for geophysical methods that have low input voltage such as microtremor application.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Approaching a burning plasma on the NIF

The locus of National Ignition Facility (NIF) inertial confinement fusion (ICF) implosion data, in hot-spot burn-average areal density (ρR) and Brysk temperature (T) space, is shown here and illustrates that several implosions are nearing a burning plasma state, where α-heating is the dominant source of plasma heating. A formula for diagnosing a burning plasma using measured/inferred data from ICF implosion experiments is given with the underlying derivation. Plotting ICF implosion performance against inferred hot-spot energy illustrates the key need to maximize the delivery of energy to an implosion hot-spot. A very compact analytical equation for α-heating is given, which shows that fundamentally, α-heating provides a discrete “boost” to p V γ of an implosion hot-spot. It is then shown numerically that the analytical expression for the amplification of p V γ is simply related to yield amplification and to other more famous metrics used for inferring yield amplification in experiments. Interestingly, the argument of the p V γ boost equation appears to provide a fundamental ignition condition that implicitly includes the effects of asymmetry, and it also exposes the origin of why there is uncertainty in defining single ignition criteria. The resulting analysis of NIF implosion data indicates that an increase in burn-average hot-spot temperature will be needed in order to ignite, and the strategy being pursued to achieve this goal is outlined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Digitalized two parametric system for gamma/neutron spectrometry - Paper 59

Many types of detectors like stilbene, NE-213 etc. in conjunction with photomultiplier loaded with low working resistance produce pulses of approximately 100 ns length and contain information about deposited particle in the trailing edge. Using fast analog to digital converters (ADC) and field-programmable gate array (FPGA) it is possible to create a spectrometric system working in mixed gamma and neutron fields which is not loaded dead time. The count rate of processed pulses can reach more than one million per second. Such a high count rate of processed pulses can be achieved due to the pulse processing is implemented in FPGA. The output of this pulse processing is amplitude which describes the energy of deposited particle and discrimination parameter whereby it is possible to discriminate photons and neutrons. To increase the dynamic range of energy of detectable particle the signal from photomultiplier is separated into two branches with different amplification. Each branch is digitalized by separate ADC. Components from which the system is composed are so light that the spectrometer can be easily transported. Its weight is less than 3 kilograms. Spectrometer was tested in the research reactor LR-0 in Rez near Prague (Czech Republic). The measured data was processed using deconvolution into a neutron flux density and compared with nowadays used analog spectrometer and simulation result. Measured neutron spectrum of Cf-252 is included. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗