Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “corner”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Numerical Simulation of Supersonic Compression Corners and Hypersonic Inlet Flows Using the RPLUS2D Code

A two-dimensional computational code, PRLUS2D, which was developed for the reactive propulsive flows of ramjets and scramjets, was validated for two-dimensional shock-wave/turbulent-boundary-layer interactions. The problem of compression corners at supersonic speeds was solved using the RPLUS2D code. To validate the RPLUS2D code for hypersonic speeds, it was applied to a realistic hypersonic inlet geometry. Both the Baldwin-Lomax and the Chien two-equation turbulence models were used. Computational results showed that the RPLUS2D code compared very well with experimentally obtained data for supersonic compression corner flows, except in the case of large separated flows resulting from the interactions between the shock wave and turbulent boundary layer. The computational results compared well with the experiment results in a hypersonic NASA P8 inlet case, with the Chien two-equation turbulence model performing better than the Baldwin-Lomax model.

Kapoor, Kamlesh↗
NASA NTRS1994

Effects of turbulence compressibility and unsteadiness in compression corner flow

The structure of the separated flow region over a 20 degree compression corner at a free-stream Mach number of 2.84 is investigated computationally using a Reynolds averaged Navier Stokes (R.A.N.S.) solver and kappa-epsilon model. At this Mach number and ramp angle, a steady-state recirculation region of order delta(sub o) is observed, with onset of a 'plateau' in the wall pressure distribution near the corner. At lower ramp angles, separation is negligible, while at an angle of 24 degrees, separation regions of length 2 delta(sub o) are expected. Of interest here is the response of the mathematical model to inclusion of the pressure dilatation term for turbulent kinetic energy. Compared with the experimental data of Smits and Muck (1987), steady-state computations show improvement when the pressure dilatation term is included. Unsteady computations, using both unforced and then forced inlet conditions, did not predict the oscillatory motion of the separation bubble as observed in laboratory experiments. An analysis of the separation bubble oscillation and the turbulent boundary layer (T.B.L.) frequencies for this flow suggests that the bubble oscillations are of nearly the same order as the turbulent frequencies, and therefore difficult for the model to separate and resolve.

Brankovic, A.↗
NASA NTRS1994

Finite-surface method for the Maxwell equations with corner singularities

The finite-surface method for the two-dimensional Maxwell equations in generalized coordinates is extended to treat perfect conductor boundaries with sharp corners. Known singular forms of the grid and the electromagnetic fields in the neighborhood of each corner are used to obtain accurate approximations to the surface and line integrals appearing in the method. Numerical results are presented for a harmonic plane wave incident on a finite flat plate. Comparisons with exact solutions show good agreement.

Vinokur, Marcel↗
NASA NTRS1995

Analysis of corner cracks at hole by a 3-D weight function method with stresses from finite element method

Stress intensity factors for quarter-elliptical corner cracks emanating from a circular hole are determined using a 3-D weight function method combined with a 3-D finite element method. The 3-D finite element method is used to analyze uncracked configuration and provide stress distribution in the region where crack is to occur. Using this stress distribution as input, the 3-D weight function method is used to determine stress intensity factors. Three different loading conditions, i.e. remote tension, remote bending and wedge loading, are considered for a wide range in geometrical parameters. The significance in using 3-D uncracked stress distribution and the difference between single and double corner cracks are studied. Typical crack opening displacements are also provided. Comparisons are made with solutions available in the literature.

Zhao, W.↗
NASA NTRS2000

Three Corner Sat Communications System

Three Corner Satellite is a constellation of three nanosatellites designed and built by students. New Mexico State University has taken on the design of the communications system for this constellation. The system includes the forward link, return link, and the crosslink. Due to size, mass, power, and financial constraints, we must design a small, light, power efficient, and inexpensive communications system. This thesis presents the design of a radio system to accomplish the data transmission requirements in light of the system constraints. In addition to the hardware design, the operational commands needed by the satellite's on-board computer to control and communicate with the communications hardware will be presented. In order for the hardware to communicate with the ground stations, we will examine the link budgets derived from the radiated power of the transmitters, link distance, data modulation, and data rate for each link. The antenna design for the constellation is analyzed using software and testing the physical antennas on a model satellite. After the analysis and testing, a combination of different systems will meet and exceed the requirements and constraints of the Three Corner Satellite constellation.

Anderson, Bobby↗
NASA NTRS2011

Uncertainty Assessments of 2D and Axisymmetric Hypersonic Shock Wave - Turbulent Boundary Layer Interaction Simulations at Compression Corners

This paper is one of a series of five papers in a special session organized by the NASA Fundamental Aeronautics Program that addresses uncertainty assessments for CFD simulations in hypersonic flow. Simulations of a shock emanating from a compression corner and interacting with a fully developed turbulent boundary layer are evaluated herein. Mission relevant conditions at Mach 7 and Mach 14 are defined for a pre-compression ramp of a scramjet powered vehicle. Three compression angles are defined, the smallest to avoid separation losses and the largest to force a separated flow engaging more complicated flow physics. The Baldwin-Lomax and the Cebeci-Smith algebraic models, the one-equation Spalart-Allmaras model with the Catrix-Aupoix compressibility modification and two-equation models including Menter SST, Wilcox k-omega 98, and Wilcox k-omega 06 turbulence models are evaluated. Each model is fully defined herein to preclude any ambiguity regarding model implementation. Comparisons are made to existing experimental data and Van Driest theory to provide preliminary assessment of model form uncertainty. A set of coarse grained uncertainty metrics are defined to capture essential differences among turbulence models. Except for the inability of algebraic models to converge for some separated flows there is no clearly superior model as judged by these metrics. A preliminary metric for the numerical component of uncertainty in shock-turbulent-boundary-layer interactions at compression corners sufficiently steep to cause separation is defined as 55%. This value is a median of differences with experimental data averaged for peak pressure and heating and for extent of separation captured in new, grid-converged solutions presented here. This value is consistent with existing results in a literature review of hypersonic shock-turbulent-boundary-layer interactions by Roy and Blottner and with more recent computations of MacLean.

Gnoffo, Peter A.↗
NASA NTRS2021

Bioinspired Honeycomb Core Design: An Experimental Study of the Role of Corner Radius, Coping, and Interface

The honeybee’s nest has inspired the design of engineering honeycomb core that primarily abstract the hexagonal cell shape and exploit its mass minimizing properties to construct lightweight panels. This work explored three additional design features that are part of the natural honeybee comb but have not been traditionally considered as design features of interest in honeycomb design: the radius at the corner of each cell, the coping at the top of the cell walls, and the interface between cell arrays. These features were first characterized in natural honeycomb using optical and X-ray techniques, and then incorporated into honeycomb core design, and fabricated using an additive manufacturing process. The honeycomb cores were then tested in out-of-plane compression and bending, and since all three design features added mass to the overall structure, all metrics were examined per unit mass to assess performance gains. The study concluded that the addition of an interface increases specific flexural modulus but has little benefit in out-of-plane compression; coping radius positively impacts specific flexural strength; but that the corner radius has no significant effect in bending, and actually is slightly detrimental for out-of-plane compression testing.

honeycomb↗
NASA NTRSDate not supplied

Assessment of Edge-Based Viscous Method for Corner-Flow Solutions on Graphics Processing Units

A highly efficient, edge-based viscous (EBV) discretization method has been recently implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver and evaluated for Reynolds-averaged Navier-Stokes (RANS) formulations. In comparison to a well-established cell-based viscous (CBV) method, the EBV method has demonstrated multifold acceleration of all viscous-kernel computations on general unstructured mixed-element grids. The viscous kernels include evaluation of viscous fluxes, diffusion terms in turbulence models, and the corresponding Jacobian terms. In this paper, an EBV implementation of a nonlinear extension of the Spalart-Allmaras turbulence model, SA-neg-QCR2000, is presented and verified. The SA-neg-QCR2000 model is used for simulating turbulent corner flows. Previously reported EBV computations have been conducted on traditional computing architectures based on central processing units (CPU). This paper assesses benefits of the EBV method on modern high-performance computing architectures based on graphics processing units (GPU). The GPU implementations of the CBV and EBV methods are verified by comparing solutions and iterative convergence with those observed in CPU computations on the same grids. A comprehensive assessment of the EBV speedup on CPU and GPU architectures is presented for established benchmark corner flows, namely, a supersonic flow through a long square duct and a subsonic flow around a NASA juncture flow model.

CFD↗
NASA NTRSDate not supplied

Assessment of Edge-Based Viscous Method for Corner-Flow Solutions on Graphics Processing Units

A highly efficient, edge-based viscous (EBV) discretization method has been recently implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver and evaluated for Reynolds-averaged Navier-Stokes (RANS) formulations. In comparison to a well-established cell-based viscous (CBV) method, the EBV method has demonstrated multifold acceleration of all viscous-kernel computations on general unstructured mixed-element grids. The viscous kernels include evaluation of viscous fluxes, diffusion terms in turbulence models, and the corresponding Jacobian terms. In this paper, an EBV implementation of a nonlinear extension of the Spalart-Allmaras turbulence model, SA-neg-QCR2000, is presented and verified. The SA-neg-QCR2000 model is used for simulating turbulent corner flows. Previously reported EBV computations have been conducted on traditional computing architectures based on central processing units (CPU). This paper assesses benefits of the EBV method on modern high-performance computing architectures based on graphics processing units (GPU). The GPU implementations of the CBV and EBV methods are verified by comparing solutions and iterative convergence with those observed in CPU computations on the same grids. A comprehensive assessment of the EBV speedup on CPU and GPU architectures is presented for established benchmark corner flows, namely, a supersonic flow through a long square duct and a subsonic flow around a NASA juncture flow model.

CFD↗
NASA NTRSDate not supplied

Unsteady CFD Simulations of a Compression Corner Geometry Using Wall-Modeled LES Methods in Loci/CHEM

Several wall-modeled large eddy simulation (WMLES) methods are tested by simulating an unsteady Mach 2.0 compression corner geometry in Mississippi State’s Loci/CHEM solver. This study is conducted to evaluate the usage and requirements of these WMLES methods for applications regarding fluctuating pressure environments on launch vehicles with computational fluid dynamics (CFD). Two hybrid Reynolds-averaged Navier-Stokes (RANS)-large eddy simulation (LES) methods, Dynamic Hybrid RANS-LES (DHRL) and Improved Delayed Detached Eddy Simulation (IDDES), and one wall-stress-model, the Algebraic Wall Model for Wall-Modeled LES (AWMLES), are tested on varying grid and timestep refinement levels. These grid and timestep sizes are chosen to test the minimum requirements for successfully running these WMLES methods. The simulations are evaluated based on turbulent boundary layer properties in the developed boundary layer as well as unsteady quantities relating to fluctuating pressure environments in the region of the compression corner. The DHRL method shows good agreement with the comparison wind tunnel data and shows good grid and timestep convergence. The results from the IDDES and WMLES simulations show good agreement for several quantities with some discrepancies regarding others. The results presented in this paper will be used to inform further studies in predicting unsteady environments on higher-complexity geometries.

Bryson Frank↗
NASA NTRS2006

Corner cube model for internal metrology system of Space Interferometer Mission (SIM)

A corner cube (CC) articulation model has been developed to evaluate the SIM internal metrology (IntMet) optical delay bias (with the accuracy of picometer) due to the component imperfections, such as vertex offset, reflection coating index error, dihedral error, and surface figure error at each facet. This physics-based and MATLAB-implemented geometric optics model provides useful guidance on the flight system design, integration, and characterization. The first portion of this paper covers the CC model details. Then several feature of the model, such as metrology beam footprint visualization, roofline straddling/crossing analysis, and application to drive the sub-system design and the error budget flow-down, are demonstrated in the second part.

Corner cube,↗
NASA NTRS2015

Wilson Corners SWMU 001 2014 Annual Long Term Monitoring Report Kennedy Space Center, Florida

This document presents the findings of the 2014 Long Term Monitoring (LTM) that was completed at the Wilson Corners site, located at the National Aeronautics and Space Administration (NASA) John F. Kennedy Space Center (KSC), Florida. The goals of the 2014 annual LTM event were to evaluate the groundwater flow direction and gradient and to monitor the vertical and downgradient horizontal extent of the volatile organic compounds (VOCs) in groundwater at the site. The LTM activities consisted of an annual groundwater sampling event in December 2014, which included the collection of water levels from the LTM wells. During the annual groundwater sampling event, depth to groundwater was measured and VOC samples were collected using passive diffusion bags (PDBs) from 30 monitoring wells. In addition to the LTM sampling, additional assessment sampling was performed at the site using low-flow techniques based on previous LTM results and assessment activities. Assessment of monitoring well MW0052DD was performed by collecting VOC samples using low-flow techniques before and after purging 100 gallons from the well. Monitoring well MW0064 was sampled to supplement shallow VOC data north of Hot Spot 2 and east of Hot Spot 4. Monitoring well MW0089 was sampled due to its proximity to MW0090. MW0090 is screened in a deeper interval and had an unexpected detection of trichloroethene (TCE) during the 2013 LTM, which was corroborated during the March 2014 verification sampling. Monitoring well MW0130 was sampled to provide additional VOC data beneath the semi-confining clay layer in the Hot Spot 2 area.

Monitoring↗