Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Core design and performance of the Westinghouse lead fast reactor with UO 2 and MOX configurations

For this work, Westinghouse partnered with Argonne National Laboratory to design, model and optimize UO 2 - and MOX-fueled core designs for a medium size (950 MWt) Lead Fast Reactor that was pursued by Westinghouse. Using Argonne’s suite of reactor analysis codes together with Westinghouse fuel cost economic models, thousands of candidate cores were considered to achieve the economics-optimized cores presented in this paper. This optimization process considered detailed reactor physics, fuel performance, transient performance, and fuel economics models. The reactor performance of the resulting optimized UO 2 - and MOX-fueled core designs are described and compared in this paper. Both cores show fuel performance and transient behavior that is considered acceptable for the optimization presented herein, while further testing campaigns on material performance in high-temperature liquid lead will be required to confirm acceptability at the operating conditions chosen. A multi-batch strategy was selected for the UO 2 core for best fuel utilization with minimum fuel inventory costs. A single-batch fuel management was instead selected for the MOX core to maximize cycle length and minimize the impact of the longer refueling outage resulting from the higher decay heat of the discharged MOX fuel relative to the discharged UO 2 fuel, requiring a longer cooling time before dry-lift of discharged fuel could take place.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

A TOpographic Mapping (ATOM) Method to Design Magnetic Cores

Wireless power transfer offers safe, convenient, and efficient way of charging electric vehicles. Ongoing research is targeting wireless charging pad design optimization; designing the magnetic component is the most important part of the coupler design because the magnetic part determines the coupling factor and efficiency. Optimizing the coil layout and geometry as well as ferrite design requires finite elements analysis based modeling and simulation for minimized core losses, maximized magnetic coupling, and minimized material use for cost-effectiveness. Although parametric finite element analysis or emerging artificial intelligence methods can generate very accurate results, simulation times are extremely long. To address this issue, this study proposes a simple, effective core design called A TOpographic Mapping (ATOM). The proposed design is based on the design of magnetic core by using the magnetic flux distribution. The thickness of the core increases with increasing magnetic flux density, forming a variable thickness core design with less material and minimized core losses compared to conventional designs. A superimposing method is used to create an optimal design for a rotational magnetic field-based system. According to simulation results, the ATOM design reduces the required material volume by 13.19% and yields the lowest core loss and highest mutual inductance compared to other designs. In addition, misalignment, electromagnetic interference, and thermal performance were evaluated for the proposed design.

Aydin, Emrullah [Oak Ridge National Laboratory (OR↗
DOE OSTI2024

A Data-driven approach to Core Power distribution reconstruction in a Nuclear Reactor

This report presents the initial development of a data-driven approach for reconstructing the core power distribution in a nuclear reactor (power shape synthesis) using ex-core sensors. Traditional techniques rely on deploying a large number of detectors throughout the reactor core. However, this approach is not feasible for innovative reactor concepts like Advanced Reactors and Microreactors. First, the tight lattice pitch, designed to maximize power density, limits the space available for sensors. Secondly, the harsh operating conditions are not compatible with commercially available detectors. The method proposed in this work integrates high-fidelity modeling with data-driven techniques to accurately reconstruct power distribution across various reactor types, thereby reducing the reliance on in-core sensors. Purdue University Reactor One (PUR-1) was selected as the test case. The CAD model representing the latest configuration of the PUR-1 core was imported into the OpenMC simulation framework, and the model was built. Additionally, the previously developed MCNP6 model was updated. The two models were assessed against the data collected during an experimental campaign conducted in July 2024. Thirty gold foils were placed in three Irradiation Assemblies in PUR-1 core. Using the measured activity of the irradiated foils, the neutron flux at different core locations was estimated.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Advancements in NEAMS Tool Capabilities for Multiphysics Simulation of Fast Reactor Core Bowing and Identification of Validation Test Data

Under the U.S. Department of Energy Office of Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program, an integrated multiphysics approach is being developed to model the core bowing phenomena important to liquid metal-cooled fast reactors. Core bowing is an important passive safety mechanism in liquid metal-cooled fast reactors and involves Multiphysics effects including radiation transport, fluid flow, heat transfer, and mechanical response to temperature and flux gradients. This report summarizes recent progress on developing a multiphysics, MOOSE-based workflow to predict core bowing and associated reactivity feedback. Last year, thermal fluids and mechanics were coupled on a multi-assembly benchmark problem based on ABR-1000 design. This year, the reactor physics code Griffin was assessed for readiness of core bowing calculations. Preliminary integration of Griffin’s ring-heterogeneous model with thermal fluids and thermal mechanics solvers was performed. Specifically, thermal-mechanics and reactor physics were coupled for single- and multi-assembly problems, and reactor physics and subchannel methods were coupled for a single assembly model. Finally, the workflow of all three physics was preliminarily demonstrated on a single assembly model. Caveats and future development needed have been identified. To supplement the multiphysics demonstration, verification and assessment efforts of thermos-mechanical capabilities for modeling thermo-mechanical core bowing behavior were continued by analyzing IAEA Verification Problem 5 which includes radiation swelling and creep. Additionally, a small core reactor physics benchmark defined by Japan Atomic Energy Agency (JAEA) was performed to assess neutronics models for estimating reactivity feedback. Finally, Fast Flux Test Facility (FFTF) validation test data for core bowing phenomena has been identified and summarized, with a recommended path forward for validation once this capability is mature.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1971

Description of core samples returned by Apollo 12

Three core samples were collected by the Apollo 12 astronauts. Two are single cores, one of which (sample 12026) was collected close to the lunar module during the first extravehicular activity period and is 19.3 centimeters long. The second core (sample 12027) was collected at Sharp Crater during the second extravehicular activity period and is 17.4 centimeters long. The third sample is a double core (samples 12025 and 12028), which was collected near Halo Crater during the second extravehicular activity period. Unlike the other cores, the double-drive-tube core sample has complex layering with at least 10 clearly defined stratigraphic units. This core sample is approximately 41 centimeters long.

Lindsay, J. F.↗
NASA NTRS1972

Development of a core sheath process for production of oxide fibers

Improvements were sought in an oxide fiber of a core sheath configuration intended for structural applications at 2000 F (1093 C). Discontinuities in the core were eliminated by using core materials other than pure alumina, and continuous core sheath fibers were produced. In the case of some core materials, the continuous sections were sufficiently long for applications in short fiber composites. Creep at 2000 F (1093 C) was found to be due, in most cases, to breaks in the core, allowing the glass sheath to creep. Evidence was obtained indicating that a closer match between the thermal expansion coefficient of the sheath and the core would greatly improve the strength.

Freske, S.↗
NASA NTRS1974

Simplified cut core inductor design

Although filter inductor designers have routinely tended to specify molypermalloy powder cores for use in high frequency power converters and pulse-width modulated switching regulators, there are sigificant advantages in specifying C cores and cut toroids fabricated from grain oriented silicon steels which should not be overlooked. Such steel cores can develop flux densities of 1.6 tesla, with useful linearity to 1.2 tesla, whereas molypermalloy cores carrying d.c. current have useful flux density capabilities only to about 0.3 tesla. The use of silicon steel cores thus makes it possible to design more compact cores, and therefore inductors of reduced volume, or conversely to provide greater load capacity in inductors of a given volume. Information is available which makes it possible to obtain quick and close approximations of significant parameters such as size, weight and temperature rise for silicon steel cores for breadboarding. Graphs, nomographs and tables are presented for this purpose, but more complete mathematical derivations of some of the important parameters are also included for a more rigorous treatment.

Mclyman, W. T.↗
NASA NTRS1977

The chemical composition of the cores of the terrestrial planets and the moon

Using models of the quasi-chemical theory of solutions, the activity coefficients of silicon are calculated in the melts Fe-Si, Ni-Si, and Fe-Ni-Si. The calculated free energies of solution of liquid nickel and silicon in liquid iron in the interval 0 to 1400 kbar and 1500 to 4000 K, shows that Fe-Ni-Si alloy is stable under the conditions of the outer core of the earth and the cores of the terrestrial planets. The oxidation-reduction conditions are studied, and the fugacity of oxygen in the mantles of the planets and at the core-mantle boundary are calculated. The mechanism of reduction of silicon is analyzed over a broad interval of p and T. The interaction between the matter of the core and mantle is studied, resulting in the extraction of silicon from the mantle and its solution in the material of the core. It is concluded that silicon can enter into the composition of the outer core of the earth and Venus, but probably does not enter into the composition of the cores of Mercury, Mars, and the moon, if in fact the latter possesses one.

Kuskov, O. L.↗
NASA NTRS1980

Elastic constants for superplastically formed/diffusion-bonded corrugated sandwich core

Formulas and associated graphs for evaluating the effective elastic constants for a superplastically formed/diffusion bonded (SPF/DB) corrugated sandwich core, are presented. A comparison of structural stiffnesses of the sandwich core and a honeycomb core under conditions of equal sandwich core density was made. The stiffness in the thickness direction of the optimum SPF/DB corrugated core (that is, triangular truss core) is lower than that of the honeycomb core, and that the former has higher transverse shear stiffness than the latter.

Ko, W. L.↗
NASA NTRS1980

Static and transient performance of YF-102 engine with up to 14 percent core airbleed for the quiet short-haul research aircraft

An outdoor static test stand was used to measure the steady-state and transient performance of the YF-102 turbofan engine with core airbleed. The test configuration included a bellmouth inlet and a confluent-flow exhaust system similar in size to the quiet short-haul research aircraft (QSRA) exhaust system. For the steady-state tests, the engine operated satisfactorily with core bleed up to 14 percent of the core inlet flow. For the transient tests the engine accelerated and decelerated satisfactorily with no core bleed and with core bleed up to 11 percent of the core inlet flow (maximum tested). For some of the tests the core-bleed flow rate was scheduled to vary with fan discharge pressure, to simulate the QSRA bleed requirements. No stability, surge, stall, overtemperature, combustor flameout, or other operating problems were encountered in any of the tests. Steady-state and transient engine performance data are presented in graphs, and fuel-control trajectories for typical transient tests are shown.

Mcardle, J. G.↗
NASA NTRS1981

Models of the earth's core

Combined inferences from seismology, high-pressure experiment and theory, geomagnetism, fluid dynamics, and current views of terrestrial planetary evolution lead to models of the earth's core with five basic properties. These are that core formation was contemporaneous with earth accretion; the core is not in chemical equilibrium with the mantle; the outer core is a fluid iron alloy containing significant quantities of lighter elements and is probably almost adiabatic and compositionally uniform; the more iron-rich inner solid core is a consequence of partial freezing of the outer core, and the energy release from this process sustains the earth's magnetic field; and the thermodynamic properties of the core are well constrained by the application of liquid-state theory to seismic and labroatory data.

Stevenson, D. J.↗
NASA NTRS1982

The Apollo 15 regolith - Comparative petrology of drive tube 15010/15011 and drill core section 15003

Two Apollo 15 regolith cores - double drive-tube 15010/15011 and deep drill core section 15003 - were compared. The drive tube was taken from near the edge of Hadley Rille within the mare region and the drill core was taken from the landing site, approximately the same distance as the drive tube from the Apennine Front. Optical modes were done on the two cores, each of which was divided into three stratigraphic units defined by minor differences in grain size and modal abundances. Electron microprobe data were collected on the mineral and glass fragments within each unit. Fused-soil-free bulk chemistries were calculated for each unit by modal recombination, using our modal data and average compositional and density data for soil components. It is found that the drive tube and drill core section are fairly homogeneous units both chemically and modally. Both soils are submature to immature. There are, however, significant differences between the cores. The drill core shows significant enrichments of highland lithic-fragments and highland-derived minerals and glasses relative to the drive tube. These differences are attributed to the fresh nature of the drive tube soil whose major source material is mare basalt ejecta from the shallow bedrock.

Walker, R. J.↗
NASA NTRS1984

The size of the lunar core

A 0.2 arc second phase shift in the 18.6 year forced precession of the lunar figure was inferred from analysis of lunar laser ranging data. The source of the phase shift is either viscous friction at a lunar core mantle boundary or solid friction caused by tidal flexing of the Moon by the Earth. Core mantle viscous coupling will explain the signature if the core radius R sub c approximately equals 330 km. On the other hand, solid friction can account for the signature only if the lunar solid friction 0 approximately equals 30 is abnormally small compared with that observed for, say, Mars (approximately equals 100 - 200). Although the inferred core radius is certainly within the limits imposed by the Apollo seismic experiment, it is significantly smaller than estimates of order 400-500 km from electromagnetic sounding. How accurate is the estimate of the R sub c derived from the phase shift? The effect of uncertainties in the frictional coupling mechanism, core density and ellipticity on the inferred core radius are discussed. The excitation of lunar free librations by core turbulence vis-a-vis other mechanisms (e.g., cometary or asteroidal impacts) and the influence of changes in lunar precession in the past on lunar dynamo generation are also examined.

Yoder, C. F.↗
NASA NTRS1989

A core handling device for the Mars Sample Return Mission

A core handling device for use on Mars is being designed. To provide a context for the design study, it was assumed that a Mars Rover/Sample Return (MRSR) Mission would have the following characteristics: a year or more in length; visits by the rover to 50 or more sites; 100 or more meter-long cores being drilled by the rover; and the capability of returning about 5 kg of Mars regolith to Earth. These characteristics lead to the belief that in order to bring back a variegated set of samples that can address the range of scientific objetives for a MRSR mission to Mars there needs to be considerable analysis done on board the rover. Furthermore, the discrepancy between the amount of sample gathered and the amount to be returned suggests that there needs to be some method of choosing the optimal set of samples. This type of analysis will require pristine material-unaltered by the drilling process. Since the core drill thermally and mechanically alters the outer diameter (about 10 pct) of the core sample, this outer area cannot be used. The primary function of the core handling device is to extract subsamples from the core and to position these subsamples, and the core itself if needed, with respect to the various analytical instruments that can be used to perform these analyses.

Gwynne, Owen↗
NASA NTRS1987

Method for stabilizing thick honeycomb core composite articles

A method of stabilizing thick honeycomb core composites is disclosed. The method comprises bonding a layer of resin impregnated woven graphite fibers to one surface of the honeycomb core, then curing the resin impregnates forming a stabilized honeycomb core. This stabilized core is then cut to net shape and the composite structure is formed by laying one or more resin impregnated fiber layers onto the stabilized core surf aces and curing the lay-up under heat and pressure forming the composite article. Also disclosed is a stabilized honeycomb subassembly formed by bonding a graphite fiber, resin impregnated layer onto one of the honeycomb core surfaces and curing the resins, then shaping the stabilized honeycomb core to the desired form.

Gary J Jacaruso↗
NASA NTRS1991

Steady state toroidal magnetic field at earth's core-mantle boundary

Measurements of the dc electrical potential near the top of earth's mantle have been extrapolated into the deep mantle in order to estimate the strength of the toroidal magnetic field component at the core-mantle interface. Recent measurements have been interpreted as indicating that at the core-mantle interface, the magnetic toroidal and poloidal field components are approximately equal in magnitude. A motivation for such measurements is to obtain an estimate of the strength of the toroidal magnetic field in the core, a quantity important to our understanding of the geomagnetic field's dynamo generation. Through the use of several simple and idealized calculation, this paper discusses the theoretical relationship between the amplitude of the toroidal magnetic field at the core-mantle boundary and the actual amplitude within the core. Even with a very low inferred value of the toroidal field amplitude at the core-mantle boundary, (a few gauss), the toroidal field amplitude within the core could be consistent with a magnetohydrodynamic dynamo dominated by nonuniform rotation and having a strong toroidal magnetic field.

Levy, Eugene H.↗
NASA NTRS1992

Interface of an uncoupled boundary layer algorithm with an inviscid core flow algorithm for unsteady supersonic engine inlets

An uncoupled boundary layer algorithm was combined with an inviscid core flow algorithm to model flows within supersonic engine inlets. The inviscid flow algorithm that was used was the LArge Perturbation INlet Code (LAPIN). The boundary layer and inviscid core flow algorithms were formulated in different manners. The boundary layer algorithm was two dimensional and solved in nonconservation form, while the core flow algorithm was one dimensional and solved in conservation form. In order to interface the two codes, the following modifications were important. The coordinate system was set up to maintain the parabolic nature of the boundary layer algorithm while approaching the one dimensional core flow solution far from a wall. The pressure gradient used in the boundary layer equation was calculated using the core flow values and the boundary layer equations, so the boundary layer solution smoothly approached the core flow values far from the wall. Flaring was used for the advection terms perpendicular to the core flow to maintain the stability of the algorithm. With these modifications, the combined viscous/inviscid algorithm matched well with experimental observations of pressure distributions with a supersonic inlet.

Darling, Douglas↗
NASA NTRS1992

Interface of an uncoupled boundary layer algorithm with an inviscid core flow algorithm for unsteady supersonic engine inlets

An uncoupled boundary layer algorithm was combined with an inviscid core flow algorithm to model flows within supersonic engine inlets. The inviscid flow algorithm that was used was the LArge Perturbation INlet Code (LAPIN). The boundary layer and inviscid core flow algorithms were formulated in different manners. The boundary layer algorithm was two dimensional and solved in nonconservation form, while the core flow algorithm was one dimensional and solved in conservation form. In order to interface the two codes, the following modifications were important. The coordinate system was set up to maintain the parabolic nature of the boundary layer algorithm while approaching the one dimensional core flow solution far from a wall. The pressure gradient used in the boundary layer equation was calculated using the core flow values and the boundary layer equations, so the boundary layer solution smoothly approached the core flow values far from the wall. Flaring was used for the advection terms perpendicular to the core flow to maintain the stability of the algorithm. With these modifications, the combined viscous/inviscid algorithm matched well experimental observations of pressure distributions with a supersonic inlet.

Darling, Douglas↗