Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compensation methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Effects of solar angle on reflectance from wetland vegetation

A hand-held radiometer was used to gather spectral data from wetland vegetation canopies to determine the effects of solar angle on reflectance. The reflectance of leafless and gramineous canopies was highly dependent on solar angle, while broadleaf canopy reflectance was not. The solar angle effects are quantified, and a method to compensate for differences in solar angle at the time of collection of spectral data is described. It was found that adjusting spectral data for solar angle effects substantially improved remote sensing estimates of biomass.

Gross, M. F.↗
NASA NTRS1990

Development of a vibration isolation prototype system for microgravity space experiments

The presence of small levels of low-frequency accelerations on the space shuttle orbiters has degraded the microgravity environment for the science community. Growing concern about this microgravity environment has generated interest in systems that can isolate microgravity science experiments from vibrations. This interest has resulted primarily in studies of isolation systems with active methods of compensation. The development of a magnetically suspended, six-degree-of-freedom active vibration isolation prototype system capable of providing the needed compensation to the orbital environment is presented. A design for the magnetic actuators is described, and the control law for the prototype system that gives a nonintrusive inertial isolation response to the system is also described. Relative and inertial sensors are used to provide an inertial reference for isolating the payload.

Logsdon, Kirk A.↗
NASA NTRS1991

Development of a vibration isolation prototype system for microgravity space experiments

The presence of small levels of low-frequency accelerations on the Space Shuttle orbiters has degraded the microgravity environment for the science community. Growing concern about this microgravity environment has generated interest in systems that can isolate microgravity science experiments from vibrations. This interest has resulted primarily in studies of isolation systems with active methods of compensation. The development of a magnetically suspended, six-degree-of-freedom active vibration isolation prototype system capable of providing the needed compensation to the orbital environment is presented. A design for the magnetic actuators is described, and the control law for the prototype system that gives a nonintrusive inertial isolation respone to the system is also described. Relative and inertial sensors are used to provide an inertial reference for isolating the payload.

Logsdon, K. A.↗
NASA NTRS1992

An analysis of combustion studies in shock expansion tunnels and reflected shock tunnels

The effect of initial nonequilibrium dissociated air constituents on the combustion of hydrogen in high-speed flows for a simulated Mach 17 flight condition was investigated by analyzing the results of comparative combustion experiments performed in a reflected shock tunnel test gas and in a shock expansion tunnel test gas. The results were analyzed and interpreted with a one-dimensional quasi-three-stream combustor code that includes finite rate combustion chemistry. The results of this study indicate that the combustion process is kinetically controlled in the experiments in both tunnels and the presence of the nonequilibrium partially dissociated oxygen in the reflected shock tunnel enhances the combustion. Methods of compensating for the effect of dissociated oxygen are discussed.

Jachimowski, Casimir J.↗
NASA NTRS1991

Ultrasonic modulus determination in composite media

A nondestructive test procedure for determining the elastic properties of anisotropic media is presented. The technique is based on transit time measurements for multiple angles of incidence and a numerical solution of the resulting coupled nonlinear equations for modulus determination. Methods for compensating for energy flux deviation from the wave normal and the resulting differences group and phase velocity are devised.

Kline, R. A.↗
NASA NTRS1992

Determination of water surface temperature based on the use of Thermal Infrared Multispectral Scanner data

A straightforward method for compensating Thermal Infrared Multispectral Scanner (TIMS) digital data for the influence of atmospheric path radiance and the attenuation of target energy by the atmosphere is presented. A band ratioing model useful for estimating water surface temperatures, which requires no ground truth measurements, is included. A study conducted to test the potential of the model and the magnitudes of the corrections for atmosphere encountered is presented. Results of the study, which was based on data collected during an engineering evaluation flight of TIMS, indicate errors in the estimate of the surface temperature of the water fall from +/- 1.0 C for uncorrected data to +/- 0.4 C when data have been corrected according to the model presented. This value approaches the noise-limited thermal resolution of the sensor at the time of the flight.

Anderson, James E.↗
NASA NTRS2002

Sliding-Mode Control Applied for Robust Control of a Highly Unstable Aircraft

An investigation into the application of an observer based sliding mode controller for robust control of a highly unstable aircraft and methods of compensating for actuator dynamics is performed. After a brief overview of some reconfigurable controllers, sliding mode control (SMC) is selected because of its invariance properties and lack of need for parameter identification. SMC is reviewed and issues with parasitic dynamics, which cause system instability, are addressed. Utilizing sliding manifold boundary layers, the nonlinear control is converted to a linear control and sliding manifold design is performed in the frequency domain. An additional feedback form of model reference hedging is employed which is similar to a prefilter and has large benefits to system performance. The effects of inclusion of actuator dynamics into the designed plant is heavily investigated. Multiple Simulink models of the full longitudinal dynamics and wing deflection modes of the forward swept aero elastic vehicle (FSAV) are constructed. Additionally a linear state space models to analyze effects from various system parameters. The FSAV has a pole at +7 rad/sec and is non-minimum phase. The use of 'model actuators' in the feedback path, and varying there design, is heavily investigated for the resulting effects on plant robustness and tolerance to actuator failure. The use of redundant actuators is also explored and improved robustness is shown. All models are simulated with severe failure and excellent tracking, and task dependent handling qualities, and low pilot induced oscillation tendency is shown.

Vetter, Travis Kenneth↗
NASA NTRS1922

The Use of Multiplied Pressures for Automatic Altitude Adjustments

The efficient performance of an airplane requires that certain adjustments be made as the density of the air through which the airplane passes changes. The safety of the over-dimensioned aircraft engine depends upon careful manipulation of spark advance and throttle opening and a proper control of a variable pitch propeller, if the maximum performance of the supercharged engine is to be obtained. It is evident that there is a real need for satisfactory devices to make such adjustments automatically. Discussed here is a method of automatic compensation which deserves consideration in the design of such devices. Existing schemes for automatic compensation all depend upon some contrivance which functions primarily because of changes in atmospheric pressure. In these devices a leak in the supposedly tight chamber means utter failure. The elimination of this source of danger is one of the aims of the method of altitude compensation described here. The change suggested is to make the source of operation the difference between atmospheric pressure and some multiple of atmospheric pressure instead of the difference between the atmospheric pressure and that of the gas confined in a tight chamber. The design of a device based on this method of altitude compensation is given.

Sparrow, Stanwood S↗
NASA NTRS1989

Improved reading performance using individualized compensation filters for observers with losses in central vision

A method to improve the reading performance of subjects with losses in central vision is proposed in which the amplitudes of the intermediate spatial frequencies are boosted relative to the lower spatial frequencies. In the method, words are filtered using an image enhancement function which is based on a subject's losses in visual function relative to a normal subject. It was found that 30-70 percent less magnification was necessary, and that reading rates were improved 2-3 times, using the method. The individualized compensation filters improved the clarity and visibility of words. The shape of the enhancement function was shown to be important in determining the optimum compensation filter for improving reading performance.

Lawton, Teri B.↗
NASA NTRS1993

Robust Crossfeed Design for Hovering Rotorcraft

Control law design for rotorcraft fly-by-wire systems normally attempts to decouple angular responses using fixed-gain crossfeeds. This approach can lead to poor decoupling over the frequency range of pilot inputs and increase the load on the feedback loops. In order to improve the decoupling performance, dynamic crossfeeds may be adopted. Moreover, because of the large changes that occur in rotorcraft dynamics due to small changes about the nominal design condition, especially for near-hovering flight, the crossfeed design must be 'robust'. A new low-order matching method is presented here to design robust crossfeed compensators for multi-input, multi-output (MIMO) systems. The technique identifies degrees-of-freedom that can be decoupled using crossfeeds, given an anticipated set of parameter variations for the range of flight conditions of concern. Cross-coupling is then reduced for degrees-of-freedom that can use crossfeed compensation by minimizing off-axis response magnitude average and variance. Results are presented for the analysis of pitch, roll, yaw and heave coupling of the UH-60 Black Hawk helicopter in near-hovering flight. Robust crossfeeds are designed that show significant improvement in decoupling performance and robustness over nominal, single design point, compensators. The design method and results are presented in an easily used graphical format that lends significant physical insight to the design procedure. This plant pre-compensation technique is an appropriate preliminary step to the design of robust feedback control laws for rotorcraft.

Catapang, David R.↗
NASA NTRS1993

Robust crossfeed design for hovering rotorcraft

Control law design for rotorcraft fly-by-wire systems normally attempts to decouple angular responses using fixed-gain crossfeeds. This approach can lead to poor decoupling over the frequency range of pilot inputs and increase the load on the feedback loops. In order to improve the decoupling performance, dynamic crossfeeds may be adopted. Moreover, because of the large changes that occur in rotorcraft dynamics due to small changes about the nominal design condition, especially for near-hovering flight, the crossfeed design must be 'robust.' A new low-order matching method is presented here to design robost crossfeed compensators for multi-input, multi-output (MIMO) systems. The technique identifies degrees-of-freedom that can be decoupled using crossfeeds, given an anticipated set of parameter variations for the range of flight conditions of concern. Cross-coupling is then reduced for degrees-of-freedom that can use crossfeed compensation by minimizing off-axis response magnitude average and variance. Results are presented for the analysis of pitch, roll, yaw, and heave coupling of the UH-60 Black Hawk helicopter in near-hovering flight. Robust crossfeeds are designed that show significant improvement in decoupling performance and robustness over nominal, single design point, compensators. The design method and results are presented in an easily-used graphical format that lends significant physical insight to the design procedure. This plant pre-compensation technique is an appropriate preliminary step to the design of robust feedback control laws for rotorcraft.

Catapang, David R.↗
NASA NTRS1973

Magnetic-field measurements for the Lewis Research Center cyclotron

The magnetic field of the Lewis Center cyclotron was mapped by using a Hall-effect magnetic-field transducer. Main-field Fourier coefficients were determined on a polar mesh of 40 radii for each of seven levels of main-field coil current. Incremental fields for eight sets of trim coils and two sets of harmonic coils were also determined at four of these main-field levels. A stored-program, digital computer was used to perform the measurements. The process was entirely automatic; all data-taking and data-reduction activities were specified by the computer programs. A new method for temperature compensation of a Hall element was used. This method required no temperature control of the element. Measurements of the Hall voltage and Hall-element resistance were sufficient to correct for temperature effects.

Fessler, T. E.↗
NASA NTRS2012

Method of assembling a thermal expansion compensator

A thermal expansion compensator is provided and includes a first electrode structure having a first surface, a second electrode structure having a second surface facing the first surface and an elastic element bonded to the first and second surfaces and including a conductive element by which the first and second electrode structures electrically and/or thermally communicate, the conductive element having a length that is not substantially longer than a distance between the first and second surfaces.

Determan, William↗
NASA NTRS2014

Ionospheric Delay Compensation Using a Scale Factor Based on an Altitude of a Receiver

In one embodiment, a method for ionospheric delay compensation is provided. The method includes determining an ionospheric delay based on a signal having propagated from the navigation satellite to a location below the ionosphere. A scale factor can be applied to the ionospheric delay, wherein the scale factor corresponds to a ratio of an ionospheric delay in the vertical direction based on an altitude of the satellite navigation system receiver. Compensation can be applied based on the ionospheric delay.

Zhao, Hui↗
NASA NTRS1992

Digital implementation of vibration suppression controllers for LSS

A synthesis procedure for positivity controllers is described, and both simulation and experimental results for vibration suppression control experiments at the NASA Marshall ACES and the NASA Langley MiniMAST ground test facilities are presented. Positivity-designed controllers provide general stability robustness to modeling errors, coupled with controller phase compensation which provides stability margins required for actual implementation. A multivariable scaling method of positivity-designed controllers is used for the on-line tuning of nominal digital controllers. A phase compensation method uses model information to predict system measurements and controller states for compensating the nominal controllers for unmodeled time delays in the system.

Bosse, A.↗
NASA NTRSDate not supplied

Onboard Doppler Compensation for Low-Rate Communications over Commercial Relay Satellites

NASA spacecraft performing scientific and exploration missions may increasingly communicate over commercial relay satellites, including those that operate at Ka-band. Ideally these spacecraft could use the same Ka-band terminal for low-rate telemetry/commanding. However, this use case presents an issue since most commercial relay systems were designed with terrestrial users in mind and cannot easily handle the Doppler effects of orbiting spacecraft. In this work we propose onboard Doppler compensation allowing spacecraft to use existing relay satellite infrastructure without modification. Specifically, we present a method for digital compensation based on a series of piecewise linear sweeps which minimizes resources used on the spacecraft’s radio. We perform orbital mechanics simulations to estimate the worst-case Doppler profiles experienced by spacecraft in several low-Earth orbits. We emulate these effects in a laboratory experiment and demonstrate the proposed technique will reduce Doppler effects by more than two orders of magnitude. The residual Doppler is small enough that modems used at commercial relay sites are able to receive error-free data even when operating at their lowest supported symbol rate.

Adam Gannon↗