Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “collision operators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Simulators for Safer Shipping

Each year one ship out of every five afloat collides with another vessel, rams a dock, or runs a ground. CAORF (Computer Aided Operations Research Facility), designed and built by Sperry Rand Corporation, incorporates technology developed in a wide variety of aerospace simulation and technical training programs. CAORF can be set up to duplicate the exact handling qualities of any vessel under various conditions of wind, tide and current. Currently a dozen different ships can be "plugged in." Bridge instrumentation is typical of modern shipboard equipment including radar, internal and external c.ommunications and new collision avoidance systems. From repetitive operation of simulated ships, MarAd is building a valuable data base for improving marine safety.

Source record↗
NASA NTRSDate not supplied

Integration of Automated Systems (IAS) Flight Test Overview

The Integration of Automated Systems (IAS) Project is conducting a series of 2023 flight tests supporting NASA's Advanced Air Mobility (AAM) and National Campaign efforts. These flights include crewed, test (i.e., ownship) and traffic (i.e., intruder) aircraft that will fly with unique technologies onboard. The presentation will include overviews of the Hazard Perception and Avoidance (HPA) and Flight Path Management (FPM) technical areas but will focus primarily on HPA. HPA will test the FAA's Airborne Collision Avoidance System X (ACAS X), a next-generation collision avoidance tool developed to support different aircraft types and operations. The rotorcraft variant, ACAS Xr, is designed to accommodate existing helicopter platforms and in-development, vertical takeoff and landing (VTOL) concepts, which are critical to the emerging AAM concept of operations. Two configurations of ACAS Xr will be examined: Collision Avoidance System (CAS, similar to the Traffic Collision Avoidance System [TCAS] II) and Detect and Avoid (DAA, previously developed to provide added situational awareness for uncrewed aircraft). Additionally, this system will be explored during cruise and low-speed flight as well as flights within en-route, structured (i.e., dense/urban), and terminal airspaces. Scripted flight conflicts will be conducted, and these conflicts will be mitigated through maneuvers that are manual (i.e., performed by the pilots) or automated (i.e., achieved by the cooperation of the program middleware and onboard ownship systems). Objective data will be collected involving system and pilot performance as well as pilot decisions; subjective data will include pilot opinions of ACAS Xr's alerting and guidance as well as the automated maneuvers.

detect and avoid↗
NASA NTRS2014

Pilot Evaluation of a UAS Detect-and-Avoid System's Effectiveness in Remaining Well Clear

Unmanned aircraft will equip with a detect-and-avoid (DAA) system that enables them to comply with the requirement to "see and avoid" other aircraft, an important layer in the overall set of procedural, strategic and tactical separation methods designed to prevent mid-air collisions. Regulators will establish minimum operating standards for DAA effectiveness, but different combinations of algorithms, displays and procedures could be used to meet those standards. The research presented in this paper indicates the effectiveness of the combined pilot-DAA system as a function of the DAA design requirements and provides data that may be used to model the behavior of pilots when employing such systems. Two simulations involving 21 professional unmanned aircraft system (UAS) pilots evaluated eight different DAA system designs in order to assess their ability to maintain the "well clear" separation standard, i.e., the state of maintaining a safe distance from other aircraft that would not normally cause the initiation of a collision avoidance maneuver by either aircraft. When the traffic display was integrated with the primary mission map directly in front of the pilot, there were fewer losses of well clear. Greater warning time provided to the pilot was strongly correlated with success in remaining well clear. Pilots' ability to separate from aircraft with cooperative and non-cooperative surveillance systems was nearly the same after accounting for the amount of alert time provided in each encounter, although the limited surveillance volume for the airborne-equipped aircraft meant alerts tended to occur later and therefore were more difficult to resolve.

detect-and-avoid↗
NASA NTRS1971

Non-partial wave treatment of reactive and non-reactive scattering Coupled integral equation formalism.

Coupled integral equations are derived for the full scattering amplitudes for both reactive and nonreactive channels. The equations do not involve any partial wave expansion and are obtained using channel operators for reactive and nonreactive collisions. These coupled integral equations are similar in nature to equations derived for purely nonreactive collisions of structureless particles. Using numerical quadrature techniques, these equations may be reduced to simultaneous algebraic equations which may then be solved.

Hayes, E. F.↗
NASA NTRS1989

Orbital debris from upper-stage breakup

The present conference on the effects of launch vehicle upper-stage breakup on the orbital debris scenario discusses an analysis of the SPOT 1 Ariane third stage, the explosive fragmentation of orbiting propellant tanks, albedo estimates for debris, Ariane-related debris in deep-space orbit, and the relationship of hypervelocity impacts to upper-stage breakups. Also discussed are the prospects for and the economics of the future removal of orbital debris, collision probabilities in GEO, current operational practices for Delta second stage breakup prevention, breakup-precluding modifications to the Ariane third stage, and the safing of the H-1 second stage after spacecraft separation.

Loftus, Joseph P., Jr.↗
NASA NTRS2005

Magnetically Attached Multifunction Maintenance Rover

A versatile mobile telerobot, denoted the magnetically attached multifunction maintenance rover (MAGMER), has been proposed for use in the inspection and maintenance of the surfaces of ships, tanks containing petrochemicals, and other large ferromagnetic structures. As its name suggests, this robot would utilize magnetic attraction to adhere to a structure. As it moved along the surface of the structure, the MAGMER would perform tasks that could include close-up visual inspection by use of video cameras, various sensors, and/or removal of paint by water-jet blasting, laser heating, or induction heating. The water-jet nozzles would be mounted coaxially within compressed-air-powered venturi nozzles that would collect the paint debris dislodged by the jets. The MAGMER would be deployed, powered, and controlled from a truck, to which it would be connected by hoses for water, compressed air, and collection of debris and by cables for electric power and communication (see Figure 1). The operation of the MAGMER on a typical large structure would necessitate the use of long cables and hoses, which can be heavy. To reduce the load of the hoses and cables on the MAGMER and thereby ensure its ability to adhere to vertical and overhanging surfaces, the hoses and cables would be paid out through telescopic booms that would be parts of a MAGMER support system. The MAGMER would move by use of four motorized, steerable wheels, each of which would be mounted in an assembly that would include permanent magnets and four pole pieces (see Figure 2). The wheels would protrude from between the pole pieces by only about 3 mm, so that the gap between the pole pieces and the ferromagnetic surface would be just large enough to permit motion along the surface but not so large as to reduce the magnetic attraction excessively. In addition to the wheel assemblies, the MAGMER would include magnetic adherence enhancement fixtures, which would comprise arrays of permanent magnets and pole pieces that could be adjusted to maximize or minimize the overall attractive magnetic force. Even with a paint thickness of 2 mm, a preliminary design provides a safety factor of 5 in the magnetic force in the upside- down, water-jets-operating condition, in which the total load (including the weight of the MAGMER and cables and the water-jet force) would be about 260 lb (the weight of 118 kg). Optionally, the MAGMER could carry magnetic shielding and/or could be equipped with a demagnetizing module to remove residual magnetism from the structure. The MAGMER would carry four charge-coupled-device cameras for visual inspection, monitoring of operation, navigation, and avoidance of collisions with obstacles. The control system of the MAGMER would include navigation and collision-avoidance subsystems that would utilize surface features as landmarks, in addition to direct images of obstacles.

Bar-Cohen, Yoseph↗
NASA NTRSDate not supplied

3D Representation of UAV-obstacle Collision Risk Under Off-nominal Conditions

Safe operations of autonomous unmanned aerial vehicles (UAVs) in low-altitude airspace with beyond visual line-of-sight (BVLOS) flights demand robust risk monitoring of airspace as well as of people and property on ground. One of the safety critical factors for UAV flights is the risk of collision with static and dynamic obstacles in proximity to its flight path. This paper presents a detailed formulation of risk of obstacle collision incorporating the effects of off-nominal conditions introduced by component failures, degraded controllability and environmental disturbances such as wind gusts. The risk is represented in terms of a matrix with rows corresponding to the likelihood of occurrence of collision and columns representing severity of collision to the vehicle and surrounding structures. Risk likelihood is generated using a Bayesian Belief Network (BBN) that compiles knowledge from related Failure Modes and Effects Analysis (FMEAs) and Subject Matter Experts (SMEs) to determine the probability of collision based on on-board sensor measurements indicative of vehicle health and controllability. Risk severity is computed utilizing a point-mass 3D kinematic model of the vehicle in presence of wind. The proposed risk factor is demonstrated on real flight data from experimental flights of an octocopter at NASA Langley Research Center in presence of simulated obstacles and wind conditions. Effect of varying wind conditions, level of controllability and obstacle measurement noise on the risk factor is demonstrated. The proposed approach enables risk-informed decision making for timely mitigation of current and future unsafe events in autonomous systems.

risk analysis↗
NASA NTRSDate not supplied

3D Representation of UAV-obstacle Collision Risk under off-nominal conditions

Safe operations of autonomous unmanned aerial vehicles (UAVs) in low-altitude airspace with beyond visual line-of-sight (BVLOS) flights demand robust risk monitoring of airspace as well as of people and property on ground. One of the safety critical factors for UAV flights is the risk of collision with static and dynamic obstacles in proximity to its flight path. This paper presents a detailed formulation of risk likelihood of obstacle collision incorporating the effects of off-nominal conditions introduced by component failures, degraded controllability and environmental disturbances such as wind gusts. The deviation in the planned trajectory caused due to wind is computed utilizing a point-mass 3D kinematic simulation model of the vehicle. Likelihood of risk for the flight plan is then analyzed based on generating the probability of collision for each point in the trajectory. The proposed risk factor is demonstrated on real flight data from experimental flights of an octocopter at NASA Langley Research Center in presence of simulated obstacles and wind conditions. Effect of varying wind conditions, distance from obstacles, level of controllability and obstacle measurement noise on the risk factor is demonstrated. The proposed approach enables risk-informed decision making for timely mitigation of current and future unsafe events in autonomous systems.

Portia Banerjee↗
NASA NTRSDate not supplied

Ground to Air Testing of a Fused Optical-Radar Aircraft Detection and Tracking System

Onboard detection and tracking capability are integral to the sensing component in collision avoidance systems needed to safely operate autonomous urban air taxis and small Unmanned Aircraft Systems. Ground-based validation of detection and tracking systems is an important milestone towards the end goal of real-time collision avoidance using onboard sensors and algorithms. In this work, we evaluate three Extended Kalman Filter(EKF)based fusion trackers with radar and vision detection inputs, and compare them with baseline trackers for each sensor type. Performance is assessed using field collected data of ground to air test flights with the sensors co-located on a stable platform with an instrumented multirotor acting as the intruder performing a waypoint pattern at a distance of1.1km to 0.3km to simulate a head-on collision geometry. Fusing an image-based morphological detector with a radar detector using an EKF covered 74% of the ground truth position updates logged by the flight controller on the multirotor within 50 meters after accounting for alignment offsets while covering 15% more ground truth updates relative to radar only. Removing timestamps when the intruder aircraft is occluded by trees and only considering timestamps where the radar has an update, the EKF image-based morphological detector combined with the radar detector covered 90% of the of the ground truth position updates within 50metersand 97% within 100 meters.

Chester V Dolph↗
NASA NTRS1989

Magneto-inductive skin sensor for robot collision avoidance: A new development

Safety is a primary concern for robots operating in space. The tri-mode sensor addresses that concern by employing a collision avoidance/management skin around the robot arms. This rf-based skin sensor is at present a dual mode (proximity and tactile). The third mode, pyroelectric, will complement the other two. The proximity mode permits the robot to sense an intruding object, to range the object, and to detect the edges of the object. The tactile mode permits the robot to sense when it has contacted an object, where on the arm it has made contact, and provides a three-dimensional image of the shape of the contact impression. The pyroelectric mode will be added to permit the robot arm to detect the proximity of a hot object and to add sensing redundancy to the two other modes. The rf-modes of the sensing skin are presented. These modes employ a highly efficient magnetic material (amorphous metal) in a sensing technique. This results in a flexible sensor array which uses a primarily inductive configuration to permit both capacitive and magnetoinductive sensing of object; thus optimizing performance in both proximity and tactile modes with the same sensing skin. The fundamental operating principles, design particulars, and theoretical models are provided to aid in the description and understanding of this sensor. Test results are also given.

Chauhan, D. S.↗
NASA NTRS2015

Total Probability of Collision as a Metric for Finite Conjunction Assessment and Collision Risk Management

On-orbit collision risk is becoming an increasing mission risk to all operational satellites in Earth orbit. Managing this risk can be disruptive to mission and operations, present challenges for decision-makers, and is time-consuming for all parties involved. With the planned capability improvements to detecting and tracking smaller orbital debris and capacity improvements to routinely predict on-orbit conjunctions, this mission risk will continue to grow in terms of likelihood and effort. It is very real possibility that the future space environment will not allow collision risk management and mission operations to be conducted in the same manner as it is today. This paper presents the concept of a finite conjunction assessment-one where each discrete conjunction is not treated separately but, rather, as a continuous event that must be managed concurrently. The paper also introduces the Total Probability of Collision as an analogous metric for finite conjunction assessment operations and provides several options for its usage in a Concept of Operations.

Conjunction Assessment↗
NASA NTRSDate not supplied

Safety Benefit Analysis of Conformance Monitoring for Situation Awareness in UTM

This work presents an analytical approach to address situations in drone operations when strategic coordination alone cannot ensure safety, requiring support from the Conformance Monitoring for Situation Awareness service and potentially other deconfliction services. This study focuses on evaluating the impact of off-nominal operations on both UA-to-UA collision risk and ground injury risk. It first establishes a relationship between the likelihood of off-nominal flights and the effectiveness of strategic coordination. The analysis then derives operational conditions where strategic coordination alone is insufficient to meet target safety requirements, particularly when the likelihood of off-nominal operations exceeds a certain threshold. The results indicate that higher operational tempo or density requires a lower likelihood of offnominal operations for strategic coordination to remain effective and meet safety targets. These findings provide quantitative operational thresholds for when CMSA services are necessary. This work contributes to the safety case for both strategic coordination and CMSA services, offering analysis on when CMSA should be employed to support strategic coordination in achieving the desired safety levels. It also establishes a framework for incorporating other deconfliction services in future safety case analyses.

Strategic deconfliction↗
NASA NTRSDate not supplied

Safety Benefit Analysis of Conformance Monitoring for Situation Awareness in UTM

This work presents an analytical approach to address situations in drone operations when strategic coordination alone cannot ensure safety, requiring support from the Conformance Monitoring for Situation Awareness service and potentially other deconfliction services. This study focuses on evaluating the impact of off-nominal operations on both UA-to-UA collision risk and ground injury risk. It first establishes a relationship between the likelihood of off-nominal flights and the effectiveness of strategic coordination. The analysis then derives operational conditions where strategic coordination alone is insufficient to meet target safety requirements, particularly when the likelihood of off-nominal operations exceeds a certain threshold. The results indicate that higher operational tempo or density requires a lower likelihood of offnominal operations for strategic coordination to remain effective and meet safety targets. These findings provide quantitative operational thresholds for when CMSA services are necessary. This work contributes to the safety case for both strategic coordination and CMSA services, offering analysis on when CMSA should be employed to support strategic coordination in achieving the desired safety levels. It also establishes a framework for incorporating other deconfliction services in future safety case analyses.

Strategic deconfliction↗
NASA NTRS1989

Transition regime droplet growth and evaporation - An integrodifferential variational approach

A variational principle based on the integrodifferential form of the Boltzmann equation, which allows very general forms of the collision integral and of the boundary operator, has been used to compute the mass flux to a spherical particle. For simplicity the problem has been restricted to the one-speed, constant cross-section approximation, the black sphere problem of neutron transport theory. Using the Hilbert expansion of the solution far from the sphere as a trial function leads to a rational expression in the inverse Knudsen number for the extrapolation distance, which is simply related to the number flux to the sphere. A five-term expansion gives results that are no more than 6 percent in error when compared to an accurate numerical solution. The technique can be applied to other forms of the collision model and other boundary conditions.

Cipolla, J. W., Jr.↗
NASA NTRS2019

Recommended Methods for Setting Mission Conjunction Analysis Hard Body Radii

For real-time conjunction assessment (CA) operations, computation of the Probability of Collision (P(sub c)) typically depends on the state vector, its covariance, and the combined hard body radius (HBR) of both the primary and secondary space-craft. However, most algorithmic approaches that compute the P(sub c) use generic conservatively valued HBRs that may tend to go beyond the physical limitations of both spacecraft, enough to drastically change the results of a conjunction assessment mitigation decision. On the other hand, if the attitude of the spacecraft is known and available, then a refined HBR can be obtained that could result in an improved and accurate numerically-computed P(sub c) value. The goal of this analysis is to demonstrate the various calculated P(sub c) values obtained based on a number of different HBR calculation techniques, oriented in the encounter or conjunction plane at the time of closest approach (TCA). Since in most conjunctions the secondary object is a debris object and thus orders of magnitude smaller than the primary, the greatest operational benefit is wrought by developing a better size estimate and representation for the primary object. We present an analysis that includes the attitude information of the primary object in the HBR calculation and assesses the resulting P(sub c) values for conjunction assessment decision making.

Mashiku, Alinda K.↗
NASA NTRS2019

Recommended Methods for Setting Mission Conjunction Analysis Hard Body Radii

For real-time conjunction assessment (CA) operations, computation of the Probability of Collision (P(sub c)) typically depends on the state vector, its covariance, and the combined hard body radius (HBR) of both the primary and secondary space-craft. However, most algorithmic approaches that compute the P(sub c) use generic conservatively valued HBRs that may tend to go beyond the physical limitations of both spacecraft, enough to drastically change the results of a conjunction assessment mitigation decision. On the other hand, if the attitude of the spacecraft is known and available, then a refined HBR can be obtained that could result in an improved and accurate numerically-computed P(sub c) value. The goal of this analysis is to demonstrate the various calculated P(sub c) values obtained based on a number of different HBR calculation techniques, oriented in the encounter or conjunction plane at the time of closest approach (TCA). Since in most conjunctions the secondary object is a debris object and thus orders of magnitude smaller than the primary, the greatest operational benefit is wrought by developing a better size estimate and representation for the primary object. We present an analysis that includes the attitude information of the primary object in the HBR calculation and assesses the resulting P(sub c) values for conjunction assessment decision making.

Mashiku, Alinda K.↗
NASA NTRS1991

Collision Avoidance System

Ames Research Center teamed with the Federal Aviation Administration (FAA) to study human performance factors associated with the use of the Traffic Alert and Collision Avoidance system (TCAS II) in an operational environment. TCAS is designed to alert pilots of the presence of other aircraft in their vicinity, to identify and track those who could be a threat, and to recommend action to avoid a collision. Ames conducted three laboratory experiments. The first showed that pilots were able to use the TCAS II correctly in the allowable time. The second tested pilots' response to changes in the avoidance advisories, and the third examined pilots' reactions to alternative displays. After a 1989 congressional mandate, the FAA ruled that TCAS would be required on all passenger carrying aircraft (to be phased in completely by 1995).

Source record↗
NASA NTRS2014

An Analysis of the FY-1C, Iridium 33, and Cosmos 2251 Fragments

The beginning of the year 2013 marks the sixth anniversary of the destruction of the Fengyun-1C (FY-1C) weather satellite as the result of an anti-satellite test conducted by China in January 2007 and the fourth anniversary of the accidental collision between Cosmos 2251 and the operational Iridium 33 in February 2009. These two events represent the worst satellite breakups in history. A total of 5579 fragments have been cataloged by the U.S. Space Surveillance Network (SSN), and almost 5000 of them were still in orbit in January 2013. In addition to these cataloged objects, hundreds of thousands (or more) of fragments down to the millimeter size regime were also generated during the breakups. These fragments are too small to be tracked by the SSN, but are large enough to be a safety concern for human space activities and robotic missions in low Earth orbit (LEO, the region below 2000 km altitude). Like their cataloged siblings, many of them remain in orbit today. These two breakup events dramatically changed the landscape of the orbital debris environment in LEO. The spatial density of the cataloged population in January 2013 is shown as the top blue curve. The combined FY-1C, Iridium 33, and Cosmos 2251 fragments (black curve) account for about 50 percent of the cataloged population below an altitude of 1000 km. They are also responsible for the concentrations at 770 km and 850 km, altitudes at which the collisions occurred. The effects of the FY-1C, Iridium 33, and Cosmos 2251 fragments will continue to be felt for decades to come. For example, approximately half of the generated FY-1C fragments will remain in orbit 20 years from now. In general, the Iridium 33 and Cosmos 2251 fragments will decay faster than the FY-1C fragments because of their lower altitudes. Of the Iridium 33 and Cosmos 2251 fragments, the former have much shorter orbital lifetimes than the latter, because lightweight composite materials were heavily used in the construction of the Iridium vehicle, leading to the higher area-to-mass ratios of the fragments.

Liou, J.-C.↗